Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 16e6cf05888bd5d3745a7633702276c2c4b5db10
  1. 16e6cf0 drivers: usb: fsl: Return if USB_MAX_CONTROLLER_COUNT is incorrect by Nikhil Badola · Sun Jun 07 12:28:04 2015 +0530
  2. 7661487 image-fit: Fix compiler warning in fit_conf_print() by Hans de Goede · Fri May 29 15:09:48 2015 +0200
  3. 13b468f Merge git://git.denx.de/u-boot-sunxi by Tom Rini · Sat Jun 06 07:03:07 2015 -0400
  4. 7c44a39 sunxi: Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default by Hans de Goede · Wed Jun 03 20:08:37 2015 +0200
  5. cf0a1e0 sunxi: Add a proper dts file for the ga10h a33 based tablet by Hans de Goede · Tue Jun 02 16:18:44 2015 +0200
  6. 7e991e3 Merge git://git.denx.de/u-boot-fdt by Tom Rini · Fri Jun 05 12:14:01 2015 -0400
  7. df61756 Merge git://git.denx.de/u-boot-dm by Tom Rini · Fri Jun 05 11:21:08 2015 -0400
  8. 4795337 fdt: Documentation for a few support functions aside their prototypes by Paul Kocialkowski · Sun May 24 12:01:53 2015 +0200
  9. 2c0fbc7 fdt: Pass the device serial number through devicetree by Paul Kocialkowski · Thu May 21 11:27:03 2015 +0200
  10. d54e748 sunxi: Rename Astar_MID756 to Et_q8_v1_6 to match kernel dts name by Hans de Goede · Tue Jun 02 16:07:19 2015 +0200
  11. 6ef1be3 sunxi: Sync dts files with the linux kernel by Hans de Goede · Tue Jun 02 15:53:40 2015 +0200
  12. 30092fe sunxi: gpio: Add "allwinner,sun8i-a33-pinctrl" by Hans de Goede · Tue Jun 02 18:09:25 2015 +0200
  13. 5a1fcb9 sunxi: Add new Mele_A1000G_quad defconfig by Hans de Goede · Mon Jun 01 16:37:24 2015 +0200
  14. 9395a0e sunxi: usb_phy: Swap check for disconnect threshold by Hans de Goede · Sun May 31 19:26:54 2015 +0200
  15. e652530 sunxi: mmc: Enable pull-up on card-detect gpio pin by Hans de Goede · Sat May 30 16:39:10 2015 +0200
  16. 2fc683d gpio: fix typos in GPIO header by Masahiro Yamada · Fri May 29 21:57:33 2015 +0900
  17. 7e3a0c3 sandbox: Compile test device tree when CONFIG_UT_DM is defined by Simon Glass · Sat May 23 11:53:57 2015 -0600
  18. 336b295 sandbox: dts: Add the real-time-clock test nodes back in by Simon Glass · Fri May 22 15:42:17 2015 -0600
  19. 45ab008 sandbox: dts: Sort the sandbox.dts file by Simon Glass · Fri May 22 15:42:16 2015 -0600
  20. 5b96863 sandbox: dts: Sort the test.dts file a little by Simon Glass · Fri May 22 15:42:15 2015 -0600
  21. 682ae86 dm: Sort the uclass IDs after the tegra/PMIC addition by Simon Glass · Fri May 22 15:42:14 2015 -0600
  22. a814941 dm: pci: Allow PCI bus numbering aliases by Simon Glass · Sun May 10 21:08:06 2015 -0600
  23. 9c3b7d6 sandbox: Tidy up terminal restore by Simon Glass · Sun May 10 21:07:27 2015 -0600
  24. f70353a x86: minnowmax: initialize the pin-muxing from device tree by Gabriel Huau · Mon May 11 23:18:25 2015 -0700
  25. f813548 x86: gpio: add pinctrl support from the device tree by Gabriel Huau · Mon May 25 22:27:37 2015 -0700
  26. 4f5908d x86: baytrail: pci region 3 is not always mapped to end of ram by Andrew Bradford · Wed Jun 03 12:37:39 2015 -0400
  27. ef37e7b x86: qemu: Implement PIRQ routing by Bin Meng · Wed Jun 03 09:20:06 2015 +0800
  28. 70be096 x86: coreboot: Control I/O port 0xb2 writing via device tree by Bin Meng · Wed Jun 03 09:20:05 2015 +0800
  29. 000883b x86: qemu: Create separate i440fx and q35 device trees by Bin Meng · Wed Jun 03 09:20:04 2015 +0800
  30. 5949013 x86: coreboot: Fix cosmetic issues by Bin Meng · Wed Jun 03 09:20:02 2015 +0800
  31. 51887c3 x86: kconfig: Make FSP_TEMP_RAM_ADDR depend on HAVE_FSP by Bin Meng · Mon Jun 01 21:07:23 2015 +0800
  32. 1635e48 tools: ifdtool: Do not write region while its size is negative by Bin Meng · Sun May 31 14:57:35 2015 +0800
  33. 8e97e29 x86: qemu: Adjust VGA initialization by Bin Meng · Mon May 25 22:36:27 2015 +0800
  34. 19c7739 x86: qemu: Enable legacy IDE I/O ports decode by Bin Meng · Mon May 25 22:36:26 2015 +0800
  35. a8b70a1 x86: qemu: Turn on legacy segments decode by Bin Meng · Sun May 24 00:12:33 2015 +0800
  36. de5b8b1 x86: qemu: Make host bridge (b.d.f=0.0.0) visible by Bin Meng · Sun May 24 00:12:32 2015 +0800
  37. 17194d5 x86: fsp_support: Correct high mem comment typo by Andrew Bradford · Fri May 22 15:11:23 2015 -0400
  38. 4a6da30 x86: Do sanity test on pirq table before writing by Bin Meng · Mon May 25 22:35:07 2015 +0800
  39. ef9e9f9 x86: quark: Implement PIRQ routing by Bin Meng · Mon May 25 22:35:06 2015 +0800
  40. db5eec8 x86: Document irq router device tree bindings by Bin Meng · Mon May 25 22:35:05 2015 +0800
  41. 51c3b1e x86: Refactor PIRQ routing support by Bin Meng · Mon May 25 22:35:04 2015 +0800
  42. e4d2836 x86: qemu: Add ATA/SATA support by Bin Meng · Sat May 16 09:33:19 2015 +0800
  43. 186e64e x86: Add CONFIG_LBA48 and remove CONFIG_ATAPI in x86-common.h by Bin Meng · Sat May 16 09:33:18 2015 +0800
  44. 5c5ca87 cmd_ide: Eliminate build warnings in atapi_inquiry() by Bin Meng · Sat May 16 09:33:17 2015 +0800
  45. acb8d31 pci: Do not skip legacy IDE device configuration by Bin Meng · Sat May 16 09:33:15 2015 +0800
  46. 33105f9 pci: Allow debug message output in pci_auto.c by Bin Meng · Sat May 16 09:33:14 2015 +0800
  47. ceb9793 x86: qemu: Add graphics support by Bin Meng · Mon May 11 07:36:30 2015 +0800
  48. 072b79d x86: Move FRAMEBUFFER_SET_VESA_MODE etc to video Kconfig by Bin Meng · Mon May 11 07:36:29 2015 +0800
  49. 7495d03 video: Kconfig: Make VESA driver avaiable for non-x86 boards by Bin Meng · Mon May 11 07:36:28 2015 +0800
  50. 4d7294a x86: Remove DECLARE_GLOBAL_DATA_PTR in board files by Bin Meng · Thu Apr 30 19:05:24 2015 +0800
  51. 796c81c x86: Update README.x86 for QEMU support by Bin Meng · Thu May 07 21:34:12 2015 +0800
  52. 851fa77 x86: Change coreboot default build configuration to QEMU by Bin Meng · Thu May 07 21:34:11 2015 +0800
  53. 42fb70a x86: Set CONFIG_NR_DRAM_BANKS to 8 and move it to x86-common.h by Bin Meng · Thu May 07 21:34:10 2015 +0800
  54. f9bfac1 x86: Make QEMU the default vendor by Bin Meng · Thu May 07 21:34:09 2015 +0800
  55. 2229c4c x86: Support QEMU x86 targets by Bin Meng · Thu May 07 21:34:08 2015 +0800
  56. 8dadff1 pci: Move pci_hose_phys_to_bus() to pci_common.c by Bin Meng · Thu May 07 21:34:07 2015 +0800
  57. 3059892 board/BuR/common: fix netconsole by Hannes Schmelzer · Thu May 28 16:41:54 2015 +0200
  58. 3466855 configs: remove CONFIG_NET_MULTI by Lars Poeschel · Tue Jun 02 11:25:54 2015 +0200
  59. f5215c2 ARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQ by Lars Poeschel · Tue Jun 02 11:23:04 2015 +0200
  60. 84b327f Merge branch 'master' of git://git.denx.de/u-boot-net by Tom Rini · Mon Jun 01 16:47:23 2015 -0400
  61. 2c1b1db net: Fix NET_RANDOM_ETHADDR dependencies by Michal Simek · Mon May 25 11:37:22 2015 +0200
  62. 9c1c43c net: Move the CMD_NET config to defconfigs by Joe Hershberger · Fri May 29 19:46:35 2015 -0500
  63. add5589 Move setexpr to Kconfig by Joe Hershberger · Tue May 05 19:08:13 2015 -0500
  64. c0c57aa blackfin: fix build error on bct-brettl2 board by Masahiro Yamada · Tue May 26 12:42:13 2015 +0900
  65. cbafcdf sparc: fix build error on gr_ep2s60 board by Masahiro Yamada · Tue May 26 10:58:31 2015 +0900
  66. 37fb103 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh by Tom Rini · Mon Jun 01 07:16:36 2015 -0400
  67. f1ee163 arm: rmobile: alt: Update to QoS revision 0.31 and 0.321 by Nobuhiro Iwamatsu · Thu Mar 05 08:30:40 2015 +0900
  68. 36c11f6 arm: rmobile: gose: Update to QoS revision 0.311 by Nobuhiro Iwamatsu · Thu Mar 05 08:30:39 2015 +0900
  69. c0db896 arm: rmobile: koelsch: Update to QoS revision 0.411 by Nobuhiro Iwamatsu · Thu Mar 05 08:30:38 2015 +0900
  70. 98e559c arm: rmobile: lager: Update to QoS revision 0.973 by Nobuhiro Iwamatsu · Thu Mar 05 08:30:37 2015 +0900
  71. dde8ca9 arm: rmobile: alt: Add ethernet function B support by Mitsuhiro Kimura · Wed Mar 04 15:57:03 2015 +0900
  72. 0e7c339 Merge branch 'master' of git://git.denx.de/u-boot-uniphier by Tom Rini · Sat May 30 20:16:01 2015 -0400
  73. a14d89e Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · Sat May 30 20:15:59 2015 -0400
  74. 62f3ff1 ARM: UniPhier: add pin mux setting for NAND CS1 of PH1-Pro4 by Masahiro Yamada · Fri May 29 17:30:10 2015 +0900
  75. a7506e8 ARM: UniPhier: fix pin mux setting for USB port 2 of PH1-sLD8 by Masahiro Yamada · Fri May 29 17:30:09 2015 +0900
  76. 7a5a05a ARM: UniPhier: update DDR PHY register map for PH1-Pro5 by Masahiro Yamada · Fri May 29 17:30:08 2015 +0900
  77. 9e02734 ARM: UniPhier: enable CONFIG_NET_RANDOM_ETHADDR by Masahiro Yamada · Fri May 29 17:30:07 2015 +0900
  78. a9458e7 ARM: UniPhier: set MACH_PH1_PRO4 as default SoC by Masahiro Yamada · Fri May 29 17:30:06 2015 +0900
  79. 94d79e9 ARM: UniPhier: move CONFIG_SYS_TEXT_BASE to Kconfig by Masahiro Yamada · Fri May 29 17:30:05 2015 +0900
  80. 9937245 ARM: UniPhier: remove meaningless CONFIG_SPL_BUILD ifdefs by Masahiro Yamada · Fri May 29 17:30:04 2015 +0900
  81. 2c75201 ARM: UniPhier: remove unnecessary cache coherency code by Masahiro Yamada · Fri May 29 17:30:03 2015 +0900
  82. 54cc329 ARM: UniPhier: use 32 bit register access for debug UART setting by Masahiro Yamada · Fri May 29 17:30:02 2015 +0900
  83. 563ee4c ARM: UniPhier: update the vendor name of UniPhier in Kconfig by Masahiro Yamada · Fri May 29 17:30:01 2015 +0900
  84. 663a23f ARM: UniPhier: replace <asm/io.h> with <linux/io.h> by Masahiro Yamada · Fri May 29 17:30:00 2015 +0900
  85. 5acec7c ARM: sunxi: Enable PSCI for sun8i by Chen-Yu Tsai · Thu May 28 21:25:34 2015 +0800
  86. 5b9f1aa ARM: sunxi: Share sun6i PSCI backend with sun8i by Chen-Yu Tsai · Thu May 28 21:25:33 2015 +0800
  87. f31017c ARM: sunxi: Enable PSCI for sun6i by Chen-Yu Tsai · Thu May 28 21:25:32 2015 +0800
  88. 4670eb4 ARM: sunxi: Add sun6i specific PSCI implementation by Chen-Yu Tsai · Thu May 28 21:25:31 2015 +0800
  89. d196fad ARM: sunxi: Make PSCI code sun7i specific by Chen-Yu Tsai · Thu May 28 21:25:30 2015 +0800
  90. f147d94 ARM: sunxi: Document registers in PSCI code by Chen-Yu Tsai · Thu May 28 21:25:29 2015 +0800
  91. dbbfdc1 sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory by Daniel Kochmański · Tue May 26 17:00:42 2015 +0200
  92. 2b735ad sunxi: Match sun4i, sun6i, sun9i CCI definitions for NAND and DMA by Roy Spliet · Tue May 26 17:00:41 2015 +0200
  93. 6a99b33 sunxi: Add DMA definitions by Roy Spliet · Tue May 26 17:00:40 2015 +0200
  94. b3642fa sunxi/nand: change BLOCK_SIZE in mksunxiboot to match NAND block size by Daniel Kochmański · Tue May 26 17:00:39 2015 +0200
  95. 5e69445 sun9i: Add Merrii_A80_Optimus board / defconfig file by Hans de Goede · Tue Jan 13 23:24:05 2015 +0100
  96. 7bfe2bb sun9i: Basic sun9i (A80) support by Hans de Goede · Tue Jan 13 19:25:06 2015 +0100
  97. 0b95a28 sunxi: Update sunxi-common.h to deal with different A1-SRAM base addr on sun9i by Hans de Goede · Wed May 20 15:27:16 2015 +0200
  98. d241ecf sunxi: Update sunxi-common.h to deal with different DRAM base addr on sun9i by Hans de Goede · Tue May 19 22:12:31 2015 +0200
  99. 70804ed sunxi: Remove support for building "old-fashioned" fel binaries by Hans de Goede · Tue May 19 21:44:44 2015 +0200
  100. 0d70914 sunxi: Use axp221 sid on a33 by Hans de Goede · Tue May 19 23:34:00 2015 +0200