| Adam Ford | a2965c9 | 2017-04-07 10:25:34 -0500 | [diff] [blame] | 1 | U-Boot for LogicPD i.MX6 Development Kit |
| 2 | ---------------------------------------- |
| 3 | |
| 4 | This file contains information for the port of U-Boot to the Logic PD Development kit. |
| 5 | |
| 6 | Logic PD has an i.MX6 System On Module (SOM) and a correspondong development |
| 7 | board. SOM has a built-in microSD socket, DDR and NAND flash. The development kit has |
| 8 | an SMSC Ethernet PHY, serial debug port and a variety of peripherals. |
| 9 | |
| 10 | On the intial release, the SOM came with either an i.MX6D or i.MX6Q. |
| 11 | |
| 12 | For more details about Logic PD i.MX6 Development kit, visit: |
| 13 | https://www.logicpd.com/ |
| 14 | |
| 15 | Building U-Boot for Logic PD Development Kit |
| 16 | -------------------------------------------- |
| 17 | To build U-Boot for the Dual and Quad variants: |
| 18 | |
| 19 | make imx6q_logic_defconfig |
| 20 | make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux- |
| 21 | |
| 22 | |
| 23 | Flashing U-Boot into the SD card |
| 24 | -------------------------------- |
| 25 | |
| 26 | See README.imximage for details on booting from SD |
| 27 | |
| 28 | Flashing U-Boot into NAND |
| 29 | ------------------------- |
| 30 | Once in Linux with MTD support for the NAND on /dev/mtd0, program U-Boot with the following: |
| 31 | with: |
| 32 | |
| 33 | kobs-ng init -v -x u-boot-dtb.imx |
| 34 | |
| 35 | Additional Support Documentation can be found at: |
| 36 | https://support.logicpd.com/ |
| 37 | |