blob: 63e5f900da73ec45b1b29b24ba8b21c01dd7d906 [file] [log] [blame]
Priyanka Jain29b426b2014-01-30 11:30:04 +05301/*
2 * Copyright 2014 Freescale Semiconductor, Inc.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#include <common.h>
8#include <netdev.h>
9#include <asm/immap_85xx.h>
10#include <fm_eth.h>
11#include <fsl_mdio.h>
12#include <malloc.h>
13#include <asm/fsl_dtsec.h>
14
15#include "../common/fman.h"
16
17int board_eth_init(bd_t *bis)
18{
19#ifdef CONFIG_FMAN_ENET
20 struct memac_mdio_info memac_mdio_info;
21 unsigned int i;
22 int phy_addr = 0;
23 printf("Initializing Fman\n");
24
25 memac_mdio_info.regs =
26 (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
27 memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
28
29 /* Register the real 1G MDIO bus */
30 fm_memac_mdio_init(bis, &memac_mdio_info);
31
32 /*
33 * Program on board RGMII, SGMII PHY addresses.
34 */
35 for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
36 int idx = i - FM1_DTSEC1;
37
38 switch (fm_info_get_enet_if(i)) {
39#ifdef CONFIG_T1040RDB
40 case PHY_INTERFACE_MODE_SGMII:
41 /* T1040RDB only supports SGMII on DTSEC3 */
42 fm_info_set_phy_address(FM1_DTSEC3,
43 CONFIG_SYS_SGMII1_PHY_ADDR);
Shaohui Xief7cbfe52014-04-11 12:12:30 +080044 break;
Priyanka Jain29b426b2014-01-30 11:30:04 +053045#endif
46 case PHY_INTERFACE_MODE_RGMII:
47 if (FM1_DTSEC4 == i)
48 phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR;
49 if (FM1_DTSEC5 == i)
50 phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR;
51 fm_info_set_phy_address(i, phy_addr);
52 break;
53 case PHY_INTERFACE_MODE_QSGMII:
54 fm_info_set_phy_address(i, 0);
55 break;
56 case PHY_INTERFACE_MODE_NONE:
57 fm_info_set_phy_address(i, 0);
58 break;
59 default:
60 printf("Fman1: DTSEC%u set to unknown interface %i\n",
61 idx + 1, fm_info_get_enet_if(i));
62 fm_info_set_phy_address(i, 0);
63 break;
64 }
65 fm_info_set_mdio(i,
66 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
67 }
68
69 cpu_eth_init(bis);
70#endif
71
72 return pci_eth_init(bis);
73}