Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / f62074eff3e63a91cf7cf0fc934f10829e2f92b1 / . / include / configs / usb_a9263.h
blob: fa38274d56f1a0ca059eb6e81f8c7976a9d4bd96 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -0400[diff] [blame]1/* SPDX-License-Identifier: GPL-2.0+ */
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]2/*
3 * (C) Copyright 2007-2013
4 * Stelian Pop <stelian.pop@leadtechdesign.com>
5 * Lead Tech Design <www.leadtechdesign.com>
6 * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
7 * Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
8 *
9 * Settings for Calao USB-A9263 board
10 *
11 * U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap
12 * installed on board will not be able to load it properly.
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]13 */
14
15#ifndef __CONFIG_H
16#define __CONFIG_H
17#include <asm/hardware.h>
18
19/* ARM asynchronous clock */
20#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
21#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]22
23#define CONFIG_MACH_TYPE MACH_TYPE_USB_A9263
24
25#define CONFIG_ARCH_CPU_INIT
26
27#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
28#define CONFIG_SETUP_MEMORY_TAGS
29#define CONFIG_INITRD_TAG
30
31#define CONFIG_SKIP_LOWLEVEL_INIT
32
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]33/*
34 * Hardware drivers
35 */
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]36/*
37 * BOOTP options
38 */
39#define CONFIG_BOOTP_BOOTFILESIZE
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]40
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]41/* SDRAM */
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]42#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
43#define CONFIG_SYS_SDRAM_SIZE 0x04000000
44
45#define CONFIG_SYS_INIT_SP_ADDR \
Wenyou.Yang@microchip.comd5d29162017-07-21 17:07:46 +0800[diff] [blame]46 (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]47
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]48/* NAND flash */
49#ifdef CONFIG_CMD_NAND
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]50#define CONFIG_SYS_MAX_NAND_DEVICE 1
51#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
52/* our ALE is AD21 */
53#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
54/* our CLE is AD22 */
55#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
56#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
57#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
58#endif
59
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]60/* Ethernet */
61#define CONFIG_MACB
62#define CONFIG_RMII
63#define CONFIG_NET_RETRY_COUNT 20
64#define CONFIG_AT91_WANTS_COMMON_PHY
65
66/* USB */
67#ifdef CONFIG_CMD_USB
68#define CONFIG_USB_ATMEL
69#define CONFIG_USB_OHCI_NEW
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]70#define CONFIG_SYS_USB_OHCI_CPU_INIT
71#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
72#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
73#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]74#endif
75
76#define CONFIG_SYS_LOAD_ADDR 0x22000000
77
78#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
79#define CONFIG_SYS_MEMTEST_END 0x23e00000
80
Wenyou.Yang@microchip.comd5d29162017-07-21 17:07:46 +0800[diff] [blame]81/* bootstrap + u-boot + env + linux in dataflash on CS0 */
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]82#define CONFIG_ENV_OFFSET 0x2000
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]83#define CONFIG_ENV_SIZE 0x2000
Wenyou.Yang@microchip.comd5d29162017-07-21 17:07:46 +0800[diff] [blame]84#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]85#define CONFIG_BOOTCOMMAND "nboot 21000000 0"
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]86#define CONFIG_EXTRA_ENV_SETTINGS \
Tom Rini5ad8e112017-10-22 17:55:07 -0400[diff] [blame]87 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]88
Mateusz Kulikowski6a302ae2013-12-02 23:30:58 +0100[diff] [blame]89/*
90 * Size of malloc() pool
91 */
92#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
93
94#endif