blob: 3d91e99b97f17e58c91ccb24930134489ec1c627 [file] [log] [blame]
Jon Loeliger8b1f74b2007-06-11 19:01:34 -05001/*
2 * Copyright 2007 Freescale Semiconductor, Inc.
3 *
4 * This file is licensed under the terms of the GNU General Public
5 * License Version 2. This file is licensed "as is" without any
6 * warranty of any kind, whether express or implied.
7 */
8
9#ifndef _CONFIG_CMD_ALL_H
10#define _CONFIG_CMD_ALL_H
11
12/*
13 * Alphabetical list of all possible commands.
14 */
15
16#define CONFIG_CMD_ASKENV /* ask for env variable */
17#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
18#define CONFIG_CMD_BDI /* bdinfo */
19#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
20#define CONFIG_CMD_BMP /* BMP support */
21#define CONFIG_CMD_BOOTD /* bootd */
22#define CONFIG_CMD_BSP /* Board Specific functions */
23#define CONFIG_CMD_CACHE /* icache, dcache */
24#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */
25#define CONFIG_CMD_CONSOLE /* coninfo */
26#define CONFIG_CMD_DATE /* support for RTC, date/time...*/
27#define CONFIG_CMD_DHCP /* DHCP Support */
28#define CONFIG_CMD_DIAG /* Diagnostics */
29#define CONFIG_CMD_DISPLAY /* Display support */
30#define CONFIG_CMD_DOC /* Disk-On-Chip Support */
31#define CONFIG_CMD_DTT /* Digital Therm and Thermostat */
32#define CONFIG_CMD_ECHO /* echo arguments */
33#define CONFIG_CMD_EEPROM /* EEPROM read/write support */
34#define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */
35#define CONFIG_CMD_ENV /* saveenv */
36#define CONFIG_CMD_EXT2 /* EXT2 Support */
37#define CONFIG_CMD_FAT /* FAT support */
38#define CONFIG_CMD_FDC /* Floppy Disk Support */
39#define CONFIG_CMD_FDOS /* Floppy DOS support */
40#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
41#define CONFIG_CMD_FPGA /* FPGA configuration Support */
42#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */
43#define CONFIG_CMD_I2C /* I2C serial bus support */
44#define CONFIG_CMD_IDE /* IDE harddisk support */
45#define CONFIG_CMD_IMI /* iminfo */
46#define CONFIG_CMD_IMLS /* List all found images */
47#define CONFIG_CMD_IMMAP /* IMMR dump support */
48#define CONFIG_CMD_IRQ /* irqinfo */
49#define CONFIG_CMD_ITEST /* Integer (and string) test */
50#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
51#define CONFIG_CMD_KGDB /* kgdb */
52#define CONFIG_CMD_LOADB /* loadb */
53#define CONFIG_CMD_LOADS /* loads */
54#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
55#define CONFIG_CMD_MFSL /* FSL support for Microblaze */
56#define CONFIG_CMD_MII /* MII support */
57#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
58#define CONFIG_CMD_MMC /* MMC support */
59#define CONFIG_CMD_NAND /* NAND support */
60#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
61#define CONFIG_CMD_NFS /* NFS support */
62#define CONFIG_CMD_PCI /* pciinfo */
63#define CONFIG_CMD_PCMCIA /* PCMCIA support */
64#define CONFIG_CMD_PING /* ping support */
65#define CONFIG_CMD_PORTIO /* Port I/O */
66#define CONFIG_CMD_REGINFO /* Register dump */
67#define CONFIG_CMD_REISER /* Reiserfs support */
68#define CONFIG_CMD_RUN /* run command in env variable */
69#define CONFIG_CMD_SAVES /* save S record dump */
70#define CONFIG_CMD_SCSI /* SCSI Support */
71#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
72#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
73#define CONFIG_CMD_SNTP /* SNTP support */
74#define CONFIG_CMD_SPI /* SPI utility */
75#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
76#define CONFIG_CMD_USB /* USB Support */
77#define CONFIG_CMD_VFD /* VFD support (TRAB) */
78#define CONFIG_CMD_XIMG /* Load part of Multi Image */
Peter Pearsede5b02c2007-08-14 10:10:52 +010079#define CONFIG_CMD_MUX /* AT91 MMC/SPI Mux Support */
Jon Loeliger8b1f74b2007-06-11 19:01:34 -050080
81#endif /* _CONFIG_CMD_ALL_H */