| Daniel Hellstrom | 207e695 | 2008-03-28 10:00:33 +0100 | [diff] [blame] | 1 | /* LEON2 header file. LEON2 is a SOC processor. |
| 2 | * |
| 3 | * (C) Copyright 2008 |
| 4 | * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License as |
| 8 | * published by the Free Software Foundation; either version 2 of |
| 9 | * the License, or (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program; if not, write to the Free Software |
| 18 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 19 | * MA 02111-1307 USA |
| 20 | * |
| 21 | */ |
| 22 | |
| 23 | #ifndef __LEON2_H__ |
| 24 | #define __LEON2_H__ |
| 25 | |
| 26 | #ifdef CONFIG_LEON2 |
| 27 | |
| 28 | /* LEON 2 I/O register definitions */ |
| 29 | #define LEON2_PREGS 0x80000000 |
| 30 | #define LEON2_MCFG1 0x00 |
| 31 | #define LEON2_MCFG2 0x04 |
| 32 | #define LEON2_ECTRL 0x08 |
| 33 | #define LEON2_FADDR 0x0C |
| 34 | #define LEON2_MSTAT 0x10 |
| 35 | #define LEON2_CCTRL 0x14 |
| 36 | #define LEON2_PWDOWN 0x18 |
| 37 | #define LEON2_WPROT1 0x1C |
| 38 | #define LEON2_WPROT2 0x20 |
| 39 | #define LEON2_LCONF 0x24 |
| 40 | #define LEON2_TCNT0 0x40 |
| 41 | #define LEON2_TRLD0 0x44 |
| 42 | #define LEON2_TCTRL0 0x48 |
| 43 | #define LEON2_TCNT1 0x50 |
| 44 | #define LEON2_TRLD1 0x54 |
| 45 | #define LEON2_TCTRL1 0x58 |
| 46 | #define LEON2_SCNT 0x60 |
| 47 | #define LEON2_SRLD 0x64 |
| 48 | #define LEON2_UART0 0x70 |
| 49 | #define LEON2_UDATA0 0x70 |
| 50 | #define LEON2_USTAT0 0x74 |
| 51 | #define LEON2_UCTRL0 0x78 |
| 52 | #define LEON2_USCAL0 0x7C |
| 53 | #define LEON2_UART1 0x80 |
| 54 | #define LEON2_UDATA1 0x80 |
| 55 | #define LEON2_USTAT1 0x84 |
| 56 | #define LEON2_UCTRL1 0x88 |
| 57 | #define LEON2_USCAL1 0x8C |
| 58 | #define LEON2_IMASK 0x90 |
| 59 | #define LEON2_IPEND 0x94 |
| 60 | #define LEON2_IFORCE 0x98 |
| 61 | #define LEON2_ICLEAR 0x9C |
| 62 | #define LEON2_IOREG 0xA0 |
| 63 | #define LEON2_IODIR 0xA4 |
| 64 | #define LEON2_IOICONF 0xA8 |
| 65 | #define LEON2_IPEND2 0xB0 |
| 66 | #define LEON2_IMASK2 0xB4 |
| 67 | #define LEON2_ISTAT2 0xB8 |
| 68 | #define LEON2_ICLEAR2 0xBC |
| 69 | |
| 70 | #ifndef __ASSEMBLER__ |
| 71 | /* |
| 72 | * Structure for LEON memory mapped registers. |
| 73 | * |
| 74 | * Source: Section 6.1 - On-chip registers |
| 75 | * |
| 76 | * NOTE: There is only one of these structures per CPU, its base address |
| 77 | * is 0x80000000, and the variable LEON_REG is placed there by the |
| 78 | * linkcmds file. |
| 79 | */ |
| 80 | typedef struct { |
| 81 | volatile unsigned int Memory_Config_1; |
| 82 | volatile unsigned int Memory_Config_2; |
| 83 | volatile unsigned int Edac_Control; |
| 84 | volatile unsigned int Failed_Address; |
| 85 | volatile unsigned int Memory_Status; |
| 86 | volatile unsigned int Cache_Control; |
| 87 | volatile unsigned int Power_Down; |
| 88 | volatile unsigned int Write_Protection_1; |
| 89 | volatile unsigned int Write_Protection_2; |
| 90 | volatile unsigned int Leon_Configuration; |
| 91 | volatile unsigned int dummy2; |
| 92 | volatile unsigned int dummy3; |
| 93 | volatile unsigned int dummy4; |
| 94 | volatile unsigned int dummy5; |
| 95 | volatile unsigned int dummy6; |
| 96 | volatile unsigned int dummy7; |
| 97 | volatile unsigned int Timer_Counter_1; |
| 98 | volatile unsigned int Timer_Reload_1; |
| 99 | volatile unsigned int Timer_Control_1; |
| 100 | volatile unsigned int Watchdog; |
| 101 | volatile unsigned int Timer_Counter_2; |
| 102 | volatile unsigned int Timer_Reload_2; |
| 103 | volatile unsigned int Timer_Control_2; |
| 104 | volatile unsigned int dummy8; |
| 105 | volatile unsigned int Scaler_Counter; |
| 106 | volatile unsigned int Scaler_Reload; |
| 107 | volatile unsigned int dummy9; |
| 108 | volatile unsigned int dummy10; |
| 109 | volatile unsigned int UART_Channel_1; |
| 110 | volatile unsigned int UART_Status_1; |
| 111 | volatile unsigned int UART_Control_1; |
| 112 | volatile unsigned int UART_Scaler_1; |
| 113 | volatile unsigned int UART_Channel_2; |
| 114 | volatile unsigned int UART_Status_2; |
| 115 | volatile unsigned int UART_Control_2; |
| 116 | volatile unsigned int UART_Scaler_2; |
| 117 | volatile unsigned int Interrupt_Mask; |
| 118 | volatile unsigned int Interrupt_Pending; |
| 119 | volatile unsigned int Interrupt_Force; |
| 120 | volatile unsigned int Interrupt_Clear; |
| 121 | volatile unsigned int PIO_Data; |
| 122 | volatile unsigned int PIO_Direction; |
| 123 | volatile unsigned int PIO_Interrupt; |
| 124 | } LEON2_regs; |
| 125 | |
| 126 | typedef struct { |
| 127 | volatile unsigned int UART_Channel; |
| 128 | volatile unsigned int UART_Status; |
| 129 | volatile unsigned int UART_Control; |
| 130 | volatile unsigned int UART_Scaler; |
| 131 | } LEON2_Uart_regs; |
| 132 | |
| 133 | #endif |
| 134 | |
| 135 | /* |
| 136 | * The following constants are intended to be used ONLY in assembly |
| 137 | * language files. |
| 138 | * |
| 139 | * NOTE: The intended style of usage is to load the address of LEON REGS |
| 140 | * into a register and then use these as displacements from |
| 141 | * that register. |
| 142 | */ |
| 143 | #define LEON_REG_MEMCFG1_OFFSET 0x00 |
| 144 | #define LEON_REG_MEMCFG2_OFFSET 0x04 |
| 145 | #define LEON_REG_EDACCTRL_OFFSET 0x08 |
| 146 | #define LEON_REG_FAILADDR_OFFSET 0x0C |
| 147 | #define LEON_REG_MEMSTATUS_OFFSET 0x10 |
| 148 | #define LEON_REG_CACHECTRL_OFFSET 0x14 |
| 149 | #define LEON_REG_POWERDOWN_OFFSET 0x18 |
| 150 | #define LEON_REG_WRITEPROT1_OFFSET 0x1C |
| 151 | #define LEON_REG_WRITEPROT2_OFFSET 0x20 |
| 152 | #define LEON_REG_LEONCONF_OFFSET 0x24 |
| 153 | #define LEON_REG_UNIMPLEMENTED_2_OFFSET 0x28 |
| 154 | #define LEON_REG_UNIMPLEMENTED_3_OFFSET 0x2C |
| 155 | #define LEON_REG_UNIMPLEMENTED_4_OFFSET 0x30 |
| 156 | #define LEON_REG_UNIMPLEMENTED_5_OFFSET 0x34 |
| 157 | #define LEON_REG_UNIMPLEMENTED_6_OFFSET 0x38 |
| 158 | #define LEON_REG_UNIMPLEMENTED_7_OFFSET 0x3C |
| 159 | #define LEON_REG_TIMERCNT1_OFFSET 0x40 |
| 160 | #define LEON_REG_TIMERLOAD1_OFFSET 0x44 |
| 161 | #define LEON_REG_TIMERCTRL1_OFFSET 0x48 |
| 162 | #define LEON_REG_WDOG_OFFSET 0x4C |
| 163 | #define LEON_REG_TIMERCNT2_OFFSET 0x50 |
| 164 | #define LEON_REG_TIMERLOAD2_OFFSET 0x54 |
| 165 | #define LEON_REG_TIMERCTRL2_OFFSET 0x58 |
| 166 | #define LEON_REG_UNIMPLEMENTED_8_OFFSET 0x5C |
| 167 | #define LEON_REG_SCALERCNT_OFFSET 0x60 |
| 168 | #define LEON_REG_SCALER_LOAD_OFFSET 0x64 |
| 169 | #define LEON_REG_UNIMPLEMENTED_9_OFFSET 0x68 |
| 170 | #define LEON_REG_UNIMPLEMENTED_10_OFFSET 0x6C |
| 171 | #define LEON_REG_UARTDATA1_OFFSET 0x70 |
| 172 | #define LEON_REG_UARTSTATUS1_OFFSET 0x74 |
| 173 | #define LEON_REG_UARTCTRL1_OFFSET 0x78 |
| 174 | #define LEON_REG_UARTSCALER1_OFFSET 0x7C |
| 175 | #define LEON_REG_UARTDATA2_OFFSET 0x80 |
| 176 | #define LEON_REG_UARTSTATUS2_OFFSET 0x84 |
| 177 | #define LEON_REG_UARTCTRL2_OFFSET 0x88 |
| 178 | #define LEON_REG_UARTSCALER2_OFFSET 0x8C |
| 179 | #define LEON_REG_IRQMASK_OFFSET 0x90 |
| 180 | #define LEON_REG_IRQPEND_OFFSET 0x94 |
| 181 | #define LEON_REG_IRQFORCE_OFFSET 0x98 |
| 182 | #define LEON_REG_IRQCLEAR_OFFSET 0x9C |
| 183 | #define LEON_REG_PIODATA_OFFSET 0xA0 |
| 184 | #define LEON_REG_PIODIR_OFFSET 0xA4 |
| 185 | #define LEON_REG_PIOIRQ_OFFSET 0xA8 |
| 186 | #define LEON_REG_SIM_RAM_SIZE_OFFSET 0xF4 |
| 187 | #define LEON_REG_SIM_ROM_SIZE_OFFSET 0xF8 |
| 188 | |
| 189 | /* |
| 190 | * Interrupt Sources |
| 191 | * |
| 192 | * The interrupt source numbers directly map to the trap type and to |
| 193 | * the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask, |
| 194 | * and the Interrupt Pending Registers. |
| 195 | */ |
| 196 | #define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR 1 |
| 197 | #define LEON_INTERRUPT_UART_1_RX_TX 2 |
| 198 | #define LEON_INTERRUPT_UART_0_RX_TX 3 |
| 199 | #define LEON_INTERRUPT_EXTERNAL_0 4 |
| 200 | #define LEON_INTERRUPT_EXTERNAL_1 5 |
| 201 | #define LEON_INTERRUPT_EXTERNAL_2 6 |
| 202 | #define LEON_INTERRUPT_EXTERNAL_3 7 |
| 203 | #define LEON_INTERRUPT_TIMER1 8 |
| 204 | #define LEON_INTERRUPT_TIMER2 9 |
| 205 | #define LEON_INTERRUPT_EMPTY1 10 |
| 206 | #define LEON_INTERRUPT_EMPTY2 11 |
| 207 | #define LEON_INTERRUPT_OPEN_ETH 12 |
| 208 | #define LEON_INTERRUPT_EMPTY4 13 |
| 209 | #define LEON_INTERRUPT_EMPTY5 14 |
| 210 | #define LEON_INTERRUPT_EMPTY6 15 |
| 211 | |
| 212 | /* Timer Bits */ |
| 213 | #define LEON2_TIMER_CTRL_EN 0x1 /* Timer enable */ |
| 214 | #define LEON2_TIMER_CTRL_RS 0x2 /* Timer reStart */ |
| 215 | #define LEON2_TIMER_CTRL_LD 0x4 /* Timer reLoad */ |
| 216 | #define LEON2_TIMER1_IRQNO 8 /* Timer 1 IRQ number */ |
| 217 | #define LEON2_TIMER2_IRQNO 9 /* Timer 2 IRQ number */ |
| 218 | #define LEON2_TIMER1_IE (1<<LEON2_TIMER1_IRQNO) /* Timer 1 interrupt enable */ |
| 219 | #define LEON2_TIMER2_IE (1<<LEON2_TIMER2_IRQNO) /* Timer 2 interrupt enable */ |
| 220 | |
| 221 | /* UART bits */ |
| 222 | #define LEON2_UART_CTRL_RE 1 /* UART Receiver enable */ |
| 223 | #define LEON2_UART_CTRL_TE 2 /* UART Transmitter enable */ |
| 224 | #define LEON2_UART_CTRL_RI 4 /* UART Receiver Interrupt enable */ |
| 225 | #define LEON2_UART_CTRL_TI 8 /* UART Transmitter Interrupt enable */ |
| 226 | #define LEON2_UART_CTRL_DBG (1<<11) /* Debug Bit used by GRMON */ |
| 227 | |
| 228 | #define LEON2_UART_STAT_DR 1 /* UART Data Ready */ |
| 229 | #define LEON2_UART_STAT_TSE 2 /* UART Transmit Shift Reg empty */ |
| 230 | #define LEON2_UART_STAT_THE 4 /* UART Transmit Hold Reg empty */ |
| 231 | |
| 232 | #else |
| 233 | #error Include LEON2 header file only if LEON2 processor |
| 234 | #endif |
| 235 | |
| 236 | #endif |