include/linux/apm_bios.h

#ifndef _LINUX_APM_H
#define _LINUX_APM_H

/*
 * Include file for the interface to an APM BIOS
 * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
 *
  * SPDX-License-Identifier:	GPL-2.0+
 */

#include <linux/types.h>

typedef unsigned short	apm_event_t;
typedef unsigned short	apm_eventinfo_t;

struct apm_bios_info {
	__u16	version;
	__u16	cseg;
	__u32	offset;
	__u16	cseg_16;
	__u16	dseg;
	__u16	flags;
	__u16	cseg_len;
	__u16	cseg_16_len;
	__u16	dseg_len;
};

#ifdef __KERNEL__

#define APM_CS		(GDT_ENTRY_APMBIOS_BASE * 8)
#define APM_CS_16	(APM_CS + 8)
#define APM_DS		(APM_CS_16 + 8)

/* Results of APM Installation Check */
#define APM_16_BIT_SUPPORT	0x0001
#define APM_32_BIT_SUPPORT	0x0002
#define APM_IDLE_SLOWS_CLOCK	0x0004
#define APM_BIOS_DISABLED      	0x0008
#define APM_BIOS_DISENGAGED     0x0010

/*
 * Data for APM that is persistent across module unload/load
 */
struct apm_info {
	struct apm_bios_info	bios;
	unsigned short		connection_version;
	int			get_power_status_broken;
	int			get_power_status_swabinminutes;
	int			allow_ints;
	int			forbid_idle;
	int			realmode_power_off;
	int			disabled;
};

/*
 * The APM function codes
 */
#define	APM_FUNC_INST_CHECK	0x5300
#define	APM_FUNC_REAL_CONN	0x5301
#define	APM_FUNC_16BIT_CONN	0x5302
#define	APM_FUNC_32BIT_CONN	0x5303
#define	APM_FUNC_DISCONN	0x5304
#define	APM_FUNC_IDLE		0x5305
#define	APM_FUNC_BUSY		0x5306
#define	APM_FUNC_SET_STATE	0x5307
#define	APM_FUNC_ENABLE_PM	0x5308
#define	APM_FUNC_RESTORE_BIOS	0x5309
#define	APM_FUNC_GET_STATUS	0x530a
#define	APM_FUNC_GET_EVENT	0x530b
#define	APM_FUNC_GET_STATE	0x530c
#define	APM_FUNC_ENABLE_DEV_PM	0x530d
#define	APM_FUNC_VERSION	0x530e
#define	APM_FUNC_ENGAGE_PM	0x530f
#define	APM_FUNC_GET_CAP	0x5310
#define	APM_FUNC_RESUME_TIMER	0x5311
#define	APM_FUNC_RESUME_ON_RING	0x5312
#define	APM_FUNC_TIMER		0x5313

/*
 * Function code for APM_FUNC_RESUME_TIMER
 */
#define	APM_FUNC_DISABLE_TIMER	0
#define	APM_FUNC_GET_TIMER	1
#define	APM_FUNC_SET_TIMER	2

/*
 * Function code for APM_FUNC_RESUME_ON_RING
 */
#define	APM_FUNC_DISABLE_RING	0
#define	APM_FUNC_ENABLE_RING	1
#define	APM_FUNC_GET_RING	2

/*
 * Function code for APM_FUNC_TIMER_STATUS
 */
#define	APM_FUNC_TIMER_DISABLE	0
#define	APM_FUNC_TIMER_ENABLE	1
#define	APM_FUNC_TIMER_GET	2

/*
 * in arch/i386/kernel/setup.c
 */
extern struct apm_info	apm_info;

#endif	/* __KERNEL__ */

/*
 * Power states
 */
#define APM_STATE_READY		0x0000
#define APM_STATE_STANDBY	0x0001
#define APM_STATE_SUSPEND	0x0002
#define APM_STATE_OFF		0x0003
#define APM_STATE_BUSY		0x0004
#define APM_STATE_REJECT	0x0005
#define APM_STATE_OEM_SYS	0x0020
#define APM_STATE_OEM_DEV	0x0040

#define APM_STATE_DISABLE	0x0000
#define APM_STATE_ENABLE	0x0001

#define APM_STATE_DISENGAGE	0x0000
#define APM_STATE_ENGAGE	0x0001

/*
 * Events (results of Get PM Event)
 */
#define APM_SYS_STANDBY		0x0001
#define APM_SYS_SUSPEND		0x0002
#define APM_NORMAL_RESUME	0x0003
#define APM_CRITICAL_RESUME	0x0004
#define APM_LOW_BATTERY		0x0005
#define APM_POWER_STATUS_CHANGE	0x0006
#define APM_UPDATE_TIME		0x0007
#define APM_CRITICAL_SUSPEND	0x0008
#define APM_USER_STANDBY	0x0009
#define APM_USER_SUSPEND	0x000a
#define APM_STANDBY_RESUME	0x000b
#define APM_CAPABILITY_CHANGE	0x000c

/*
 * Error codes
 */
#define APM_SUCCESS		0x00
#define APM_DISABLED		0x01
#define APM_CONNECTED		0x02
#define APM_NOT_CONNECTED	0x03
#define APM_16_CONNECTED	0x05
#define APM_16_UNSUPPORTED	0x06
#define APM_32_CONNECTED	0x07
#define APM_32_UNSUPPORTED	0x08
#define APM_BAD_DEVICE		0x09
#define APM_BAD_PARAM		0x0a
#define APM_NOT_ENGAGED		0x0b
#define APM_BAD_FUNCTION	0x0c
#define APM_RESUME_DISABLED	0x0d
#define APM_NO_ERROR		0x53
#define APM_BAD_STATE		0x60
#define APM_NO_EVENTS		0x80
#define APM_NOT_PRESENT		0x86

/*
 * APM Device IDs
 */
#define APM_DEVICE_BIOS		0x0000
#define APM_DEVICE_ALL		0x0001
#define APM_DEVICE_DISPLAY	0x0100
#define APM_DEVICE_STORAGE	0x0200
#define APM_DEVICE_PARALLEL	0x0300
#define APM_DEVICE_SERIAL	0x0400
#define APM_DEVICE_NETWORK	0x0500
#define APM_DEVICE_PCMCIA	0x0600
#define APM_DEVICE_BATTERY	0x8000
#define APM_DEVICE_OEM		0xe000
#define APM_DEVICE_OLD_ALL	0xffff
#define APM_DEVICE_CLASS	0x00ff
#define APM_DEVICE_MASK		0xff00

#ifdef __KERNEL__
/*
 * This is the "All Devices" ID communicated to the BIOS
 */
#define APM_DEVICE_BALL		((apm_info.connection_version > 0x0100) ? \
				 APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
#endif

/*
 * Battery status
 */
#define APM_MAX_BATTERIES	2

/*
 * APM defined capability bit flags
 */
#define APM_CAP_GLOBAL_STANDBY		0x0001
#define APM_CAP_GLOBAL_SUSPEND		0x0002
#define APM_CAP_RESUME_STANDBY_TIMER	0x0004 /* Timer resume from standby */
#define APM_CAP_RESUME_SUSPEND_TIMER	0x0008 /* Timer resume from suspend */
#define APM_CAP_RESUME_STANDBY_RING	0x0010 /* Resume on Ring fr standby */
#define APM_CAP_RESUME_SUSPEND_RING	0x0020 /* Resume on Ring fr suspend */
#define APM_CAP_RESUME_STANDBY_PCMCIA	0x0040 /* Resume on PCMCIA Ring	*/
#define APM_CAP_RESUME_SUSPEND_PCMCIA	0x0080 /* Resume on PCMCIA Ring	*/

/*
 * ioctl operations
 */
#include <linux/ioctl.h>

#define APM_IOC_STANDBY		_IO('A', 1)
#define APM_IOC_SUSPEND		_IO('A', 2)

#endif	/* LINUX_APM_H */