Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2010 |
| 3 | * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de |
| 4 | * |
| 5 | * based on kilauea.c |
| 6 | * by Stefan Roese, DENX Software Engineering, sr@denx.de. |
| 7 | * |
Wolfgang Denk | d79de1d | 2013-07-08 09:37:19 +0200 | [diff] [blame] | 8 | * SPDX-License-Identifier: GPL-2.0+ |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 9 | */ |
| 10 | |
| 11 | #include <common.h> |
| 12 | #include <asm/ppc4xx.h> |
| 13 | #include <asm/ppc405.h> |
| 14 | #include <libfdt.h> |
| 15 | #include <fdt_support.h> |
| 16 | #include <asm/processor.h> |
| 17 | #include <asm/io.h> |
| 18 | #include <asm/errno.h> |
| 19 | #include <asm/ppc4xx-gpio.h> |
| 20 | #include <flash.h> |
| 21 | |
| 22 | #include <pca9698.h> |
| 23 | |
| 24 | #include "405ex.h" |
| 25 | #include <gdsys_fpga.h> |
| 26 | |
| 27 | #include <miiphy.h> |
| 28 | #include <i2c.h> |
| 29 | #include <dtt.h> |
| 30 | |
| 31 | DECLARE_GLOBAL_DATA_PTR; |
| 32 | |
| 33 | #define PHYREG_CONTROL 0 |
| 34 | #define PHYREG_PAGE_ADDRESS 22 |
| 35 | #define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16 |
| 36 | #define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2 26 |
| 37 | #define PHYREG_PG2_MAC_SPECIFIC_STATUS_1 17 |
| 38 | #define PHYREG_PG2_MAC_SPECIFIC_CONTROL 21 |
| 39 | |
| 40 | #define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) |
| 41 | #define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) |
| 42 | #define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) |
| 43 | #define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300) |
| 44 | |
| 45 | enum { |
| 46 | UNITTYPE_CCD_SWITCH = 1, |
| 47 | }; |
| 48 | |
| 49 | enum { |
| 50 | HWVER_100 = 0, |
| 51 | HWVER_110 = 1, |
| 52 | }; |
| 53 | |
Dirk Eibach | 20614a2 | 2013-06-26 16:04:26 +0200 | [diff] [blame] | 54 | struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; |
| 55 | |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 56 | static inline void blank_string(int size) |
| 57 | { |
| 58 | int i; |
| 59 | |
| 60 | for (i = 0; i < size; i++) |
| 61 | putc('\b'); |
| 62 | for (i = 0; i < size; i++) |
| 63 | putc(' '); |
| 64 | for (i = 0; i < size; i++) |
| 65 | putc('\b'); |
| 66 | } |
| 67 | |
| 68 | /* |
| 69 | * Board early initialization function |
| 70 | */ |
| 71 | int misc_init_r(void) |
| 72 | { |
| 73 | /* startup fans */ |
| 74 | dtt_init(); |
| 75 | |
| 76 | #ifdef CONFIG_ENV_IS_IN_FLASH |
| 77 | /* Monitor protection ON by default */ |
| 78 | flash_protect(FLAG_PROTECT_SET, |
| 79 | -CONFIG_SYS_MONITOR_LEN, |
| 80 | 0xffffffff, |
| 81 | &flash_info[0]); |
| 82 | #endif |
| 83 | |
| 84 | return 0; |
| 85 | } |
| 86 | |
| 87 | static void print_fpga_info(unsigned dev) |
| 88 | { |
Dirk Eibach | 20614a2 | 2013-06-26 16:04:26 +0200 | [diff] [blame] | 89 | u16 versions; |
| 90 | u16 fpga_version; |
| 91 | u16 fpga_features; |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 92 | int fpga_state = get_fpga_state(dev); |
| 93 | |
| 94 | unsigned unit_type; |
| 95 | unsigned hardware_version; |
| 96 | unsigned feature_channels; |
| 97 | unsigned feature_expansion; |
| 98 | |
Dirk Eibach | 20614a2 | 2013-06-26 16:04:26 +0200 | [diff] [blame] | 99 | FPGA_GET_REG(dev, versions, &versions); |
| 100 | FPGA_GET_REG(dev, fpga_version, &fpga_version); |
| 101 | FPGA_GET_REG(dev, fpga_features, &fpga_features); |
| 102 | |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 103 | printf("FPGA%d: ", dev); |
| 104 | if (fpga_state & FPGA_STATE_PLATFORM) |
| 105 | printf("(legacy) "); |
| 106 | |
| 107 | if (fpga_state & FPGA_STATE_DONE_FAILED) { |
| 108 | printf(" done timed out\n"); |
| 109 | return; |
| 110 | } |
| 111 | |
| 112 | if (fpga_state & FPGA_STATE_REFLECTION_FAILED) { |
| 113 | printf(" refelectione test failed\n"); |
| 114 | return; |
| 115 | } |
| 116 | |
| 117 | unit_type = (versions & 0xf000) >> 12; |
| 118 | hardware_version = versions & 0x000f; |
| 119 | feature_channels = fpga_features & 0x007f; |
| 120 | feature_expansion = fpga_features & (1<<15); |
| 121 | |
| 122 | switch (unit_type) { |
| 123 | case UNITTYPE_CCD_SWITCH: |
| 124 | printf("CCD-Switch"); |
| 125 | break; |
| 126 | |
| 127 | default: |
| 128 | printf("UnitType %d(not supported)", unit_type); |
| 129 | break; |
| 130 | } |
| 131 | |
| 132 | switch (hardware_version) { |
| 133 | case HWVER_100: |
| 134 | printf(" HW-Ver 1.00\n"); |
| 135 | break; |
| 136 | |
| 137 | case HWVER_110: |
| 138 | printf(" HW-Ver 1.10\n"); |
| 139 | break; |
| 140 | |
| 141 | default: |
| 142 | printf(" HW-Ver %d(not supported)\n", |
| 143 | hardware_version); |
| 144 | break; |
| 145 | } |
| 146 | |
| 147 | printf(" FPGA V %d.%02d, features:", |
| 148 | fpga_version / 100, fpga_version % 100); |
| 149 | |
| 150 | printf(" %d channel(s)", feature_channels); |
| 151 | |
| 152 | printf(", expansion %ssupported\n", feature_expansion ? "" : "un"); |
| 153 | } |
| 154 | |
| 155 | int checkboard(void) |
| 156 | { |
| 157 | char *s = getenv("serial#"); |
| 158 | |
| 159 | printf("Board: CATCenter Io64\n"); |
| 160 | |
| 161 | if (s != NULL) { |
| 162 | puts(", serial# "); |
| 163 | puts(s); |
| 164 | } |
| 165 | |
| 166 | return 0; |
| 167 | } |
| 168 | |
| 169 | int configure_gbit_phy(char *bus, unsigned char addr) |
| 170 | { |
| 171 | unsigned short value; |
| 172 | |
| 173 | /* select page 0 */ |
| 174 | if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000)) |
| 175 | goto err_out; |
| 176 | /* switch to powerdown */ |
| 177 | if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, |
| 178 | &value)) |
| 179 | goto err_out; |
| 180 | if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, |
| 181 | value | 0x0004)) |
| 182 | goto err_out; |
| 183 | /* select page 2 */ |
| 184 | if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002)) |
| 185 | goto err_out; |
| 186 | /* disable SGMII autonegotiation */ |
| 187 | if (miiphy_write(bus, addr, PHYREG_PG2_MAC_SPECIFIC_CONTROL, 48)) |
| 188 | goto err_out; |
| 189 | /* select page 0 */ |
| 190 | if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000)) |
| 191 | goto err_out; |
| 192 | /* switch from powerdown to normal operation */ |
| 193 | if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, |
| 194 | &value)) |
| 195 | goto err_out; |
| 196 | if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, |
| 197 | value & ~0x0004)) |
| 198 | goto err_out; |
| 199 | /* reset phy so settings take effect */ |
| 200 | if (miiphy_write(bus, addr, PHYREG_CONTROL, 0x9140)) |
| 201 | goto err_out; |
| 202 | |
| 203 | return 0; |
| 204 | |
| 205 | err_out: |
| 206 | printf("Error writing to the PHY addr=%02x\n", addr); |
| 207 | return -1; |
| 208 | } |
| 209 | |
| 210 | int verify_gbit_phy(char *bus, unsigned char addr) |
| 211 | { |
| 212 | unsigned short value; |
| 213 | |
| 214 | /* select page 2 */ |
| 215 | if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002)) |
| 216 | goto err_out; |
| 217 | /* verify SGMII link status */ |
| 218 | if (miiphy_read(bus, addr, PHYREG_PG2_MAC_SPECIFIC_STATUS_1, &value)) |
| 219 | goto err_out; |
| 220 | if (!(value & (1 << 10))) |
| 221 | return -2; |
| 222 | |
| 223 | return 0; |
| 224 | |
| 225 | err_out: |
| 226 | printf("Error writing to the PHY addr=%02x\n", addr); |
| 227 | return -1; |
| 228 | } |
| 229 | |
| 230 | int last_stage_init(void) |
| 231 | { |
| 232 | unsigned int k; |
| 233 | unsigned int fpga; |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 234 | int failed = 0; |
| 235 | char str_phys[] = "Setup PHYs -"; |
| 236 | char str_serdes[] = "Start SERDES blocks"; |
| 237 | char str_channels[] = "Start FPGA channels"; |
| 238 | char str_locks[] = "Verify SERDES locks"; |
Dirk Eibach | 6e2350f | 2012-01-02 11:02:46 +0100 | [diff] [blame] | 239 | char str_hicb[] = "Verify HICB status"; |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 240 | char str_status[] = "Verify PHY status -"; |
| 241 | char slash[] = "\\|/-\\|/-"; |
| 242 | |
| 243 | print_fpga_info(0); |
| 244 | print_fpga_info(1); |
| 245 | |
| 246 | /* setup Gbit PHYs */ |
| 247 | puts("TRANS: "); |
| 248 | puts(str_phys); |
Joe Hershberger | 1fbcbed | 2016-08-08 11:28:38 -0500 | [diff] [blame^] | 249 | int retval; |
| 250 | struct mii_dev *mdiodev = mdio_alloc(); |
| 251 | if (!mdiodev) |
| 252 | return -ENOMEM; |
| 253 | strncpy(mdiodev->name, CONFIG_SYS_GBIT_MII_BUSNAME, MDIO_NAME_LEN); |
| 254 | mdiodev->read = bb_miiphy_read; |
| 255 | mdiodev->write = bb_miiphy_write; |
| 256 | |
| 257 | retval = mdio_register(mdiodev); |
| 258 | if (retval < 0) |
| 259 | return retval; |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 260 | |
| 261 | for (k = 0; k < 32; ++k) { |
| 262 | configure_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k); |
| 263 | putc('\b'); |
| 264 | putc(slash[k % 8]); |
| 265 | } |
| 266 | |
Joe Hershberger | 1fbcbed | 2016-08-08 11:28:38 -0500 | [diff] [blame^] | 267 | int retval; |
| 268 | struct mii_dev *mdiodev = mdio_alloc(); |
| 269 | if (!mdiodev) |
| 270 | return -ENOMEM; |
| 271 | strncpy(mdiodev->name, CONFIG_SYS_GBIT_MII1_BUSNAME, MDIO_NAME_LEN); |
| 272 | mdiodev->read = bb_miiphy_read; |
| 273 | mdiodev->write = bb_miiphy_write; |
| 274 | |
| 275 | retval = mdio_register(mdiodev); |
| 276 | if (retval < 0) |
| 277 | return retval; |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 278 | |
| 279 | for (k = 0; k < 32; ++k) { |
| 280 | configure_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k); |
| 281 | putc('\b'); |
| 282 | putc(slash[k % 8]); |
| 283 | } |
| 284 | blank_string(strlen(str_phys)); |
| 285 | |
| 286 | /* take fpga serdes blocks out of reset */ |
| 287 | puts(str_serdes); |
| 288 | udelay(500000); |
Dirk Eibach | 20614a2 | 2013-06-26 16:04:26 +0200 | [diff] [blame] | 289 | FPGA_SET_REG(0, quad_serdes_reset, 0); |
| 290 | FPGA_SET_REG(1, quad_serdes_reset, 0); |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 291 | blank_string(strlen(str_serdes)); |
| 292 | |
| 293 | /* take channels out of reset */ |
| 294 | puts(str_channels); |
| 295 | udelay(500000); |
| 296 | for (fpga = 0; fpga < 2; ++fpga) { |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 297 | for (k = 0; k < 32; ++k) |
Dirk Eibach | 20614a2 | 2013-06-26 16:04:26 +0200 | [diff] [blame] | 298 | FPGA_SET_REG(fpga, ch[k].config_int, 0); |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 299 | } |
| 300 | blank_string(strlen(str_channels)); |
| 301 | |
| 302 | /* verify channels serdes lock */ |
| 303 | puts(str_locks); |
| 304 | udelay(500000); |
| 305 | for (fpga = 0; fpga < 2; ++fpga) { |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 306 | for (k = 0; k < 32; ++k) { |
Dirk Eibach | 20614a2 | 2013-06-26 16:04:26 +0200 | [diff] [blame] | 307 | u16 status; |
Vasili Galka | 18b050c | 2014-06-16 17:40:59 +0300 | [diff] [blame] | 308 | FPGA_GET_REG(fpga, ch[k].status_int, &status); |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 309 | if (!(status & (1 << 4))) { |
| 310 | failed = 1; |
| 311 | printf("fpga %d channel %d: no serdes lock\n", |
| 312 | fpga, k); |
| 313 | } |
| 314 | /* reset events */ |
Dirk Eibach | 20614a2 | 2013-06-26 16:04:26 +0200 | [diff] [blame] | 315 | FPGA_SET_REG(fpga, ch[k].status_int, 0); |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 316 | } |
| 317 | } |
| 318 | blank_string(strlen(str_locks)); |
| 319 | |
Dirk Eibach | 6e2350f | 2012-01-02 11:02:46 +0100 | [diff] [blame] | 320 | /* verify hicb_status */ |
| 321 | puts(str_hicb); |
| 322 | for (fpga = 0; fpga < 2; ++fpga) { |
Dirk Eibach | 6e2350f | 2012-01-02 11:02:46 +0100 | [diff] [blame] | 323 | for (k = 0; k < 32; ++k) { |
Dirk Eibach | 20614a2 | 2013-06-26 16:04:26 +0200 | [diff] [blame] | 324 | u16 status; |
Vasili Galka | 18b050c | 2014-06-16 17:40:59 +0300 | [diff] [blame] | 325 | FPGA_GET_REG(fpga, hicb_ch[k].status_int, &status); |
Dirk Eibach | 6e2350f | 2012-01-02 11:02:46 +0100 | [diff] [blame] | 326 | if (status) |
| 327 | printf("fpga %d hicb %d: hicb status %04x\n", |
| 328 | fpga, k, status); |
| 329 | /* reset events */ |
Dirk Eibach | 20614a2 | 2013-06-26 16:04:26 +0200 | [diff] [blame] | 330 | FPGA_SET_REG(fpga, hicb_ch[k].status_int, 0); |
Dirk Eibach | 6e2350f | 2012-01-02 11:02:46 +0100 | [diff] [blame] | 331 | } |
| 332 | } |
| 333 | blank_string(strlen(str_hicb)); |
| 334 | |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 335 | /* verify phy status */ |
| 336 | puts(str_status); |
| 337 | for (k = 0; k < 32; ++k) { |
| 338 | if (verify_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k)) { |
| 339 | printf("verify baseboard phy %d failed\n", k); |
| 340 | failed = 1; |
| 341 | } |
| 342 | putc('\b'); |
| 343 | putc(slash[k % 8]); |
| 344 | } |
| 345 | for (k = 0; k < 32; ++k) { |
| 346 | if (verify_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k)) { |
| 347 | printf("verify extensionboard phy %d failed\n", k); |
| 348 | failed = 1; |
| 349 | } |
| 350 | putc('\b'); |
| 351 | putc(slash[k % 8]); |
| 352 | } |
| 353 | blank_string(strlen(str_status)); |
| 354 | |
| 355 | printf("Starting 64 channels %s\n", failed ? "failed" : "ok"); |
| 356 | |
| 357 | return 0; |
| 358 | } |
| 359 | |
| 360 | void gd405ex_init(void) |
| 361 | { |
| 362 | unsigned int k; |
| 363 | |
| 364 | if (i2c_probe(0x22)) { /* i2c_probe returns 0 on success */ |
| 365 | for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) |
Simon Glass | f2d9aaf | 2012-12-13 20:49:02 +0000 | [diff] [blame] | 366 | gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM; |
Dirk Eibach | 6fabe55 | 2011-10-20 11:12:55 +0200 | [diff] [blame] | 367 | } else { |
| 368 | pca9698_direction_output(0x22, 39, 1); |
| 369 | } |
| 370 | } |
| 371 | |
| 372 | void gd405ex_set_fpga_reset(unsigned state) |
| 373 | { |
| 374 | int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; |
| 375 | |
| 376 | if (legacy) { |
| 377 | if (state) { |
| 378 | out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); |
| 379 | out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); |
| 380 | } else { |
| 381 | out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); |
| 382 | out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); |
| 383 | } |
| 384 | } else { |
| 385 | pca9698_set_value(0x22, 39, state ? 0 : 1); |
| 386 | } |
| 387 | } |
| 388 | |
| 389 | void gd405ex_setup_hw(void) |
| 390 | { |
| 391 | gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED_N, 0); |
| 392 | gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED, 1); |
| 393 | } |
| 394 | |
| 395 | int gd405ex_get_fpga_done(unsigned fpga) |
| 396 | { |
| 397 | int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; |
| 398 | |
| 399 | if (legacy) |
| 400 | return in_le16((void *)LATCH3_BASE) |
| 401 | & CONFIG_SYS_FPGA_DONE(fpga); |
| 402 | else |
| 403 | return pca9698_get_value(0x22, fpga ? 9 : 8); |
| 404 | } |