Philippe Reynes | dfeb2c0 | 2020-01-07 20:14:10 +0100 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com> |
| 4 | */ |
| 5 | |
| 6 | #include "skeleton64.dtsi" |
| 7 | |
| 8 | / { |
| 9 | compatible = "brcm,bcm68360"; |
| 10 | #address-cells = <2>; |
| 11 | #size-cells = <2>; |
| 12 | |
| 13 | aliases { |
| 14 | spi0 = &hsspi; |
| 15 | }; |
| 16 | |
| 17 | cpus { |
| 18 | #address-cells = <2>; |
| 19 | #size-cells = <0>; |
| 20 | u-boot,dm-pre-reloc; |
| 21 | |
| 22 | cpu0: cpu@0 { |
| 23 | compatible = "arm,cortex-a53", "arm,armv8"; |
| 24 | device_type = "cpu"; |
| 25 | reg = <0x0 0x0>; |
| 26 | next-level-cache = <&l2>; |
| 27 | u-boot,dm-pre-reloc; |
| 28 | }; |
| 29 | |
| 30 | cpu1: cpu@1 { |
| 31 | compatible = "arm,cortex-a53", "arm,armv8"; |
| 32 | device_type = "cpu"; |
| 33 | reg = <0x0 0x1>; |
| 34 | next-level-cache = <&l2>; |
| 35 | u-boot,dm-pre-reloc; |
| 36 | }; |
| 37 | |
| 38 | l2: l2-cache0 { |
| 39 | compatible = "cache"; |
| 40 | u-boot,dm-pre-reloc; |
| 41 | }; |
| 42 | }; |
| 43 | |
| 44 | clocks { |
| 45 | compatible = "simple-bus"; |
| 46 | #address-cells = <2>; |
| 47 | #size-cells = <2>; |
| 48 | ranges; |
| 49 | u-boot,dm-pre-reloc; |
| 50 | |
| 51 | periph_osc: periph-osc { |
| 52 | compatible = "fixed-clock"; |
| 53 | #clock-cells = <0>; |
| 54 | clock-frequency = <200000000>; |
| 55 | u-boot,dm-pre-reloc; |
| 56 | }; |
| 57 | |
| 58 | hsspi_pll: hsspi-pll { |
| 59 | compatible = "fixed-factor-clock"; |
| 60 | #clock-cells = <0>; |
| 61 | clocks = <&periph_osc>; |
| 62 | clock-mult = <2>; |
| 63 | clock-div = <1>; |
| 64 | }; |
| 65 | |
| 66 | refclk50mhz: refclk50mhz { |
| 67 | compatible = "fixed-clock"; |
| 68 | #clock-cells = <0>; |
| 69 | clock-frequency = <50000000>; |
| 70 | }; |
| 71 | }; |
| 72 | |
| 73 | ubus { |
| 74 | compatible = "simple-bus"; |
| 75 | #address-cells = <2>; |
| 76 | #size-cells = <2>; |
| 77 | u-boot,dm-pre-reloc; |
| 78 | |
| 79 | wdt1: watchdog@ff800480 { |
| 80 | compatible = "brcm,bcm6345-wdt"; |
| 81 | reg = <0x0 0xff800480 0x0 0x14>; |
| 82 | clocks = <&refclk50mhz>; |
| 83 | }; |
| 84 | |
| 85 | wdt2: watchdog@ff8004c0 { |
| 86 | compatible = "brcm,bcm6345-wdt"; |
| 87 | reg = <0x0 0xff8004c0 0x0 0x14>; |
| 88 | clocks = <&refclk50mhz>; |
| 89 | }; |
| 90 | |
| 91 | wdt-reboot { |
| 92 | compatible = "wdt-reboot"; |
| 93 | wdt = <&wdt1>; |
| 94 | }; |
| 95 | |
| 96 | uart0: serial@ff800640 { |
| 97 | compatible = "brcm,bcm6345-uart"; |
| 98 | reg = <0x0 0xff800640 0x0 0x18>; |
| 99 | clocks = <&periph_osc>; |
| 100 | |
| 101 | status = "disabled"; |
| 102 | }; |
| 103 | |
| 104 | leds: led-controller@ff800800 { |
| 105 | compatible = "brcm,bcm6858-leds"; |
| 106 | reg = <0x0 0xff800800 0x0 0xe4>; |
| 107 | |
| 108 | status = "disabled"; |
| 109 | }; |
| 110 | |
| 111 | gpio0: gpio-controller@0xff800500 { |
| 112 | compatible = "brcm,bcm6345-gpio"; |
| 113 | reg = <0x0 0xff800500 0x0 0x4>, |
| 114 | <0x0 0xff800520 0x0 0x4>; |
| 115 | gpio-controller; |
| 116 | #gpio-cells = <2>; |
| 117 | |
| 118 | status = "disabled"; |
| 119 | }; |
| 120 | |
| 121 | gpio1: gpio-controller@0xff800504 { |
| 122 | compatible = "brcm,bcm6345-gpio"; |
| 123 | reg = <0x0 0xff800504 0x0 0x4>, |
| 124 | <0x0 0xff800524 0x0 0x4>; |
| 125 | gpio-controller; |
| 126 | #gpio-cells = <2>; |
| 127 | |
| 128 | status = "disabled"; |
| 129 | }; |
| 130 | |
| 131 | gpio2: gpio-controller@0xff800508 { |
| 132 | compatible = "brcm,bcm6345-gpio"; |
| 133 | reg = <0x0 0xff800508 0x0 0x4>, |
| 134 | <0x0 0xff800528 0x0 0x4>; |
| 135 | gpio-controller; |
| 136 | #gpio-cells = <2>; |
| 137 | |
| 138 | status = "disabled"; |
| 139 | }; |
| 140 | |
| 141 | gpio3: gpio-controller@0xff80050c { |
| 142 | compatible = "brcm,bcm6345-gpio"; |
| 143 | reg = <0x0 0xff80050c 0x0 0x4>, |
| 144 | <0x0 0xff80052c 0x0 0x4>; |
| 145 | gpio-controller; |
| 146 | #gpio-cells = <2>; |
| 147 | |
| 148 | status = "disabled"; |
| 149 | }; |
| 150 | |
| 151 | gpio4: gpio-controller@0xff800510 { |
| 152 | compatible = "brcm,bcm6345-gpio"; |
| 153 | reg = <0x0 0xff800510 0x0 0x4>, |
| 154 | <0x0 0xff800530 0x0 0x4>; |
| 155 | gpio-controller; |
| 156 | #gpio-cells = <2>; |
| 157 | |
| 158 | status = "disabled"; |
| 159 | }; |
| 160 | |
| 161 | gpio5: gpio-controller@0xff800514 { |
| 162 | compatible = "brcm,bcm6345-gpio"; |
| 163 | reg = <0x0 0xff800514 0x0 0x4>, |
| 164 | <0x0 0xff800534 0x0 0x4>; |
| 165 | gpio-controller; |
| 166 | #gpio-cells = <2>; |
| 167 | |
| 168 | status = "disabled"; |
| 169 | }; |
| 170 | |
| 171 | gpio6: gpio-controller@0xff800518 { |
| 172 | compatible = "brcm,bcm6345-gpio"; |
| 173 | reg = <0x0 0xff800518 0x0 0x4>, |
| 174 | <0x0 0xff800538 0x0 0x4>; |
| 175 | gpio-controller; |
| 176 | #gpio-cells = <2>; |
| 177 | |
| 178 | status = "disabled"; |
| 179 | }; |
| 180 | |
| 181 | gpio7: gpio-controller@0xff80051c { |
| 182 | compatible = "brcm,bcm6345-gpio"; |
| 183 | reg = <0x0 0xff80051c 0x0 0x4>, |
| 184 | <0x0 0xff80053c 0x0 0x4>; |
| 185 | gpio-controller; |
| 186 | #gpio-cells = <2>; |
| 187 | |
| 188 | status = "disabled"; |
| 189 | }; |
| 190 | |
| 191 | hsspi: spi-controller@ff801000 { |
| 192 | compatible = "brcm,bcm6328-hsspi"; |
| 193 | #address-cells = <1>; |
| 194 | #size-cells = <0>; |
| 195 | reg = <0x0 0xff801000 0x0 0x600>; |
| 196 | clocks = <&hsspi_pll>, <&hsspi_pll>; |
| 197 | clock-names = "hsspi", "pll"; |
| 198 | spi-max-frequency = <100000000>; |
| 199 | num-cs = <8>; |
| 200 | |
| 201 | status = "disabled"; |
| 202 | }; |
| 203 | |
| 204 | nand: nand-controller@ff801800 { |
| 205 | compatible = "brcm,nand-bcm68360", |
| 206 | "brcm,brcmnand-v5.0", |
| 207 | "brcm,brcmnand"; |
| 208 | reg-names = "nand", "nand-int-base", "nand-cache"; |
| 209 | reg = <0x0 0xff801800 0x0 0x180>, |
| 210 | <0x0 0xff802000 0x0 0x10>, |
| 211 | <0x0 0xff801c00 0x0 0x200>; |
| 212 | parameter-page-big-endian = <0>; |
| 213 | |
| 214 | status = "disabled"; |
| 215 | }; |
| 216 | }; |
| 217 | }; |