Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 2 | /* |
| 3 | * Device Tree Source for the SILK board |
| 4 | * |
| 5 | * Copyright (C) 2014 Renesas Electronics Corporation |
| 6 | * Copyright (C) 2014-2015 Renesas Solutions Corp. |
| 7 | * Copyright (C) 2014-2015 Cogent Embedded, Inc. |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 8 | */ |
| 9 | |
| 10 | /* |
| 11 | * SSI-AK4643 |
| 12 | * |
| 13 | * SW1: 2-1: AK4643 |
| 14 | * 2-3: ADV7511 |
| 15 | * |
| 16 | * This command is required before playback/capture: |
| 17 | * |
| 18 | * amixer set "LINEOUT Mixer DACL" on |
| 19 | */ |
| 20 | |
| 21 | /dts-v1/; |
| 22 | #include "r8a7794.dtsi" |
| 23 | #include <dt-bindings/gpio/gpio.h> |
Marek Vasut | 047b194 | 2018-06-06 19:58:17 +0200 | [diff] [blame] | 24 | #include <dt-bindings/input/input.h> |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 25 | |
| 26 | / { |
| 27 | model = "SILK"; |
| 28 | compatible = "renesas,silk", "renesas,r8a7794"; |
| 29 | |
| 30 | aliases { |
| 31 | serial0 = &scif2; |
Marek Vasut | 047b194 | 2018-06-06 19:58:17 +0200 | [diff] [blame] | 32 | i2c9 = &gpioi2c1; |
| 33 | i2c10 = &i2chdmi; |
Marek Vasut | 2a8450f | 2023-01-26 21:01:32 +0100 | [diff] [blame] | 34 | mmc0 = &mmcif0; |
| 35 | mmc1 = &sdhi1; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 36 | }; |
| 37 | |
| 38 | chosen { |
Marek Vasut | cd82e69 | 2020-04-04 15:21:26 +0200 | [diff] [blame] | 39 | bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 40 | stdout-path = "serial0:115200n8"; |
| 41 | }; |
| 42 | |
| 43 | memory@40000000 { |
| 44 | device_type = "memory"; |
| 45 | reg = <0 0x40000000 0 0x40000000>; |
| 46 | }; |
| 47 | |
Marek Vasut | 2a8450f | 2023-01-26 21:01:32 +0100 | [diff] [blame] | 48 | keyboard { |
Marek Vasut | 047b194 | 2018-06-06 19:58:17 +0200 | [diff] [blame] | 49 | compatible = "gpio-keys"; |
| 50 | |
Marek Vasut | 2a8450f | 2023-01-26 21:01:32 +0100 | [diff] [blame] | 51 | pinctrl-0 = <&keyboard_pins>; |
| 52 | pinctrl-names = "default"; |
| 53 | |
Marek Vasut | 047b194 | 2018-06-06 19:58:17 +0200 | [diff] [blame] | 54 | key-3 { |
| 55 | gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; |
| 56 | linux,code = <KEY_3>; |
| 57 | label = "SW3"; |
| 58 | wakeup-source; |
| 59 | debounce-interval = <20>; |
| 60 | }; |
| 61 | key-4 { |
| 62 | gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; |
| 63 | linux,code = <KEY_4>; |
| 64 | label = "SW4"; |
| 65 | wakeup-source; |
| 66 | debounce-interval = <20>; |
| 67 | }; |
| 68 | key-6 { |
| 69 | gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; |
| 70 | linux,code = <KEY_6>; |
| 71 | label = "SW6"; |
| 72 | wakeup-source; |
| 73 | debounce-interval = <20>; |
| 74 | }; |
| 75 | key-a { |
| 76 | gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; |
| 77 | linux,code = <KEY_A>; |
| 78 | label = "SW12-1"; |
| 79 | wakeup-source; |
| 80 | debounce-interval = <20>; |
| 81 | }; |
| 82 | key-b { |
| 83 | gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; |
| 84 | linux,code = <KEY_B>; |
| 85 | label = "SW12-2"; |
| 86 | wakeup-source; |
| 87 | debounce-interval = <20>; |
| 88 | }; |
| 89 | key-c { |
| 90 | gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; |
| 91 | linux,code = <KEY_C>; |
| 92 | label = "SW12-3"; |
| 93 | wakeup-source; |
| 94 | debounce-interval = <20>; |
| 95 | }; |
| 96 | key-d { |
| 97 | gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; |
| 98 | linux,code = <KEY_D>; |
| 99 | label = "SW12-4"; |
| 100 | wakeup-source; |
| 101 | debounce-interval = <20>; |
| 102 | }; |
| 103 | }; |
| 104 | |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 105 | d3_3v: regulator-d3-3v { |
| 106 | compatible = "regulator-fixed"; |
| 107 | regulator-name = "D3.3V"; |
| 108 | regulator-min-microvolt = <3300000>; |
| 109 | regulator-max-microvolt = <3300000>; |
| 110 | regulator-boot-on; |
| 111 | regulator-always-on; |
| 112 | }; |
| 113 | |
| 114 | vcc_sdhi1: regulator-vcc-sdhi1 { |
| 115 | compatible = "regulator-fixed"; |
| 116 | |
| 117 | regulator-name = "SDHI1 Vcc"; |
| 118 | regulator-min-microvolt = <3300000>; |
| 119 | regulator-max-microvolt = <3300000>; |
| 120 | |
| 121 | gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>; |
| 122 | enable-active-high; |
| 123 | }; |
| 124 | |
| 125 | vccq_sdhi1: regulator-vccq-sdhi1 { |
| 126 | compatible = "regulator-gpio"; |
| 127 | |
| 128 | regulator-name = "SDHI1 VccQ"; |
| 129 | regulator-min-microvolt = <1800000>; |
| 130 | regulator-max-microvolt = <3300000>; |
| 131 | |
| 132 | gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; |
| 133 | gpios-states = <1>; |
Marek Vasut | cd82e69 | 2020-04-04 15:21:26 +0200 | [diff] [blame] | 134 | states = <3300000 1>, <1800000 0>; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 135 | }; |
| 136 | |
| 137 | vga-encoder { |
| 138 | compatible = "adi,adv7123"; |
| 139 | |
| 140 | ports { |
| 141 | #address-cells = <1>; |
| 142 | #size-cells = <0>; |
| 143 | |
| 144 | port@0 { |
| 145 | reg = <0>; |
| 146 | adv7123_in: endpoint { |
| 147 | remote-endpoint = <&du_out_rgb1>; |
| 148 | }; |
| 149 | }; |
| 150 | port@1 { |
| 151 | reg = <1>; |
| 152 | adv7123_out: endpoint { |
| 153 | remote-endpoint = <&vga_in>; |
| 154 | }; |
| 155 | }; |
| 156 | }; |
| 157 | }; |
| 158 | |
| 159 | hdmi-out { |
| 160 | compatible = "hdmi-connector"; |
| 161 | type = "a"; |
| 162 | |
| 163 | port { |
| 164 | hdmi_con: endpoint { |
| 165 | remote-endpoint = <&adv7511_out>; |
| 166 | }; |
| 167 | }; |
| 168 | }; |
| 169 | |
| 170 | vga { |
| 171 | compatible = "vga-connector"; |
| 172 | |
| 173 | port { |
| 174 | vga_in: endpoint { |
| 175 | remote-endpoint = <&adv7123_out>; |
| 176 | }; |
| 177 | }; |
| 178 | }; |
| 179 | |
| 180 | x2_clk: x2-clock { |
| 181 | compatible = "fixed-clock"; |
| 182 | #clock-cells = <0>; |
| 183 | clock-frequency = <148500000>; |
| 184 | }; |
| 185 | |
| 186 | x3_clk: x3-clock { |
| 187 | compatible = "fixed-clock"; |
| 188 | #clock-cells = <0>; |
| 189 | clock-frequency = <74250000>; |
| 190 | }; |
| 191 | |
| 192 | x9_clk: audio_clock { |
| 193 | compatible = "fixed-clock"; |
| 194 | #clock-cells = <0>; |
| 195 | clock-frequency = <12288000>; |
| 196 | }; |
| 197 | |
| 198 | sound { |
| 199 | compatible = "simple-audio-card"; |
| 200 | |
| 201 | simple-audio-card,format = "left_j"; |
| 202 | simple-audio-card,bitclock-master = <&soundcodec>; |
| 203 | simple-audio-card,frame-master = <&soundcodec>; |
| 204 | |
| 205 | simple-audio-card,cpu { |
| 206 | sound-dai = <&rcar_sound>; |
| 207 | }; |
| 208 | |
| 209 | soundcodec: simple-audio-card,codec { |
| 210 | sound-dai = <&ak4643>; |
| 211 | clocks = <&x9_clk>; |
| 212 | }; |
| 213 | }; |
Marek Vasut | 047b194 | 2018-06-06 19:58:17 +0200 | [diff] [blame] | 214 | |
| 215 | gpioi2c1: i2c-9 { |
| 216 | #address-cells = <1>; |
| 217 | #size-cells = <0>; |
| 218 | compatible = "i2c-gpio"; |
| 219 | status = "disabled"; |
| 220 | scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 221 | sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 222 | i2c-gpio,delay-us = <5>; |
| 223 | }; |
| 224 | |
| 225 | /* |
| 226 | * A fallback to GPIO is provided for I2C1. |
| 227 | */ |
| 228 | i2chdmi: i2c-10 { |
| 229 | compatible = "i2c-demux-pinctrl"; |
| 230 | i2c-parent = <&i2c1>, <&gpioi2c1>; |
| 231 | i2c-bus-name = "i2c-hdmi"; |
| 232 | #address-cells = <1>; |
| 233 | #size-cells = <0>; |
| 234 | |
| 235 | ak4643: codec@12 { |
| 236 | compatible = "asahi-kasei,ak4643"; |
| 237 | #sound-dai-cells = <0>; |
| 238 | reg = <0x12>; |
| 239 | }; |
| 240 | |
| 241 | composite-in@20 { |
| 242 | compatible = "adi,adv7180"; |
| 243 | reg = <0x20>; |
Marek Vasut | 047b194 | 2018-06-06 19:58:17 +0200 | [diff] [blame] | 244 | |
| 245 | port { |
| 246 | adv7180: endpoint { |
| 247 | bus-width = <8>; |
| 248 | remote-endpoint = <&vin0ep>; |
| 249 | }; |
| 250 | }; |
| 251 | }; |
| 252 | |
| 253 | hdmi@39 { |
| 254 | compatible = "adi,adv7511w"; |
| 255 | reg = <0x39>; |
| 256 | interrupt-parent = <&gpio5>; |
| 257 | interrupts = <23 IRQ_TYPE_LEVEL_LOW>; |
| 258 | |
| 259 | adi,input-depth = <8>; |
| 260 | adi,input-colorspace = "rgb"; |
| 261 | adi,input-clock = "1x"; |
Marek Vasut | 047b194 | 2018-06-06 19:58:17 +0200 | [diff] [blame] | 262 | |
| 263 | ports { |
| 264 | #address-cells = <1>; |
| 265 | #size-cells = <0>; |
| 266 | |
| 267 | port@0 { |
| 268 | reg = <0>; |
| 269 | adv7511_in: endpoint { |
| 270 | remote-endpoint = <&du_out_rgb0>; |
| 271 | }; |
| 272 | }; |
| 273 | |
| 274 | port@1 { |
| 275 | reg = <1>; |
| 276 | adv7511_out: endpoint { |
| 277 | remote-endpoint = <&hdmi_con>; |
| 278 | }; |
| 279 | }; |
| 280 | }; |
| 281 | }; |
| 282 | |
| 283 | eeprom@50 { |
| 284 | compatible = "renesas,r1ex24002", "atmel,24c02"; |
| 285 | reg = <0x50>; |
| 286 | pagesize = <16>; |
| 287 | }; |
| 288 | }; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 289 | }; |
| 290 | |
| 291 | &extal_clk { |
| 292 | clock-frequency = <20000000>; |
| 293 | }; |
| 294 | |
| 295 | &pfc { |
| 296 | pinctrl-0 = <&scif_clk_pins>; |
| 297 | pinctrl-names = "default"; |
| 298 | |
| 299 | scif2_pins: scif2 { |
| 300 | groups = "scif2_data"; |
| 301 | function = "scif2"; |
| 302 | }; |
| 303 | |
| 304 | scif_clk_pins: scif_clk { |
| 305 | groups = "scif_clk"; |
| 306 | function = "scif_clk"; |
| 307 | }; |
| 308 | |
| 309 | ether_pins: ether { |
| 310 | groups = "eth_link", "eth_mdio", "eth_rmii"; |
| 311 | function = "eth"; |
| 312 | }; |
| 313 | |
| 314 | phy1_pins: phy1 { |
| 315 | groups = "intc_irq8"; |
| 316 | function = "intc"; |
| 317 | }; |
| 318 | |
| 319 | i2c1_pins: i2c1 { |
| 320 | groups = "i2c1"; |
| 321 | function = "i2c1"; |
| 322 | }; |
| 323 | |
| 324 | mmcif0_pins: mmcif0 { |
| 325 | groups = "mmc_data8", "mmc_ctrl"; |
| 326 | function = "mmc"; |
| 327 | }; |
| 328 | |
| 329 | sdhi1_pins: sd1 { |
| 330 | groups = "sdhi1_data4", "sdhi1_ctrl"; |
| 331 | function = "sdhi1"; |
| 332 | }; |
| 333 | |
| 334 | qspi_pins: qspi { |
| 335 | groups = "qspi_ctrl", "qspi_data4"; |
| 336 | function = "qspi"; |
| 337 | }; |
| 338 | |
| 339 | vin0_pins: vin0 { |
| 340 | groups = "vin0_data8", "vin0_clk"; |
| 341 | function = "vin0"; |
| 342 | }; |
| 343 | |
| 344 | usb0_pins: usb0 { |
| 345 | groups = "usb0"; |
| 346 | function = "usb0"; |
| 347 | }; |
| 348 | |
| 349 | usb1_pins: usb1 { |
| 350 | groups = "usb1"; |
| 351 | function = "usb1"; |
| 352 | }; |
| 353 | |
| 354 | du0_pins: du0 { |
| 355 | groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out"; |
| 356 | function = "du0"; |
| 357 | }; |
| 358 | |
| 359 | du1_pins: du1 { |
| 360 | groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out"; |
| 361 | function = "du1"; |
| 362 | }; |
| 363 | |
Marek Vasut | 2a8450f | 2023-01-26 21:01:32 +0100 | [diff] [blame] | 364 | keyboard_pins: keyboard { |
| 365 | pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12"; |
| 366 | bias-pull-up; |
| 367 | }; |
| 368 | |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 369 | ssi_pins: sound { |
| 370 | groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; |
| 371 | function = "ssi"; |
| 372 | }; |
| 373 | |
| 374 | audio_clk_pins: audio_clk { |
| 375 | groups = "audio_clkc"; |
| 376 | function = "audio_clk"; |
| 377 | }; |
| 378 | }; |
| 379 | |
| 380 | &scif2 { |
| 381 | pinctrl-0 = <&scif2_pins>; |
| 382 | pinctrl-names = "default"; |
| 383 | |
| 384 | status = "okay"; |
| 385 | }; |
| 386 | |
| 387 | &scif_clk { |
| 388 | clock-frequency = <14745600>; |
| 389 | }; |
| 390 | |
| 391 | ðer { |
Marek Vasut | 2a8450f | 2023-01-26 21:01:32 +0100 | [diff] [blame] | 392 | pinctrl-0 = <ðer_pins>, <&phy1_pins>; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 393 | pinctrl-names = "default"; |
| 394 | |
| 395 | phy-handle = <&phy1>; |
| 396 | renesas,ether-link-active-low; |
| 397 | status = "okay"; |
| 398 | |
| 399 | phy1: ethernet-phy@1 { |
Marek Vasut | 2a8450f | 2023-01-26 21:01:32 +0100 | [diff] [blame] | 400 | compatible = "ethernet-phy-id0022.1537", |
| 401 | "ethernet-phy-ieee802.3-c22"; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 402 | reg = <1>; |
| 403 | interrupt-parent = <&irqc0>; |
| 404 | interrupts = <8 IRQ_TYPE_LEVEL_LOW>; |
| 405 | micrel,led-mode = <1>; |
Marek Vasut | 2a8450f | 2023-01-26 21:01:32 +0100 | [diff] [blame] | 406 | reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 407 | }; |
| 408 | }; |
| 409 | |
| 410 | &i2c1 { |
| 411 | pinctrl-0 = <&i2c1_pins>; |
Marek Vasut | 047b194 | 2018-06-06 19:58:17 +0200 | [diff] [blame] | 412 | pinctrl-names = "i2c-hdmi"; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 413 | |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 414 | clock-frequency = <400000>; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 415 | }; |
| 416 | |
Marek Vasut | a44796c | 2019-03-04 22:50:54 +0100 | [diff] [blame] | 417 | &i2c7 { |
| 418 | status = "okay"; |
| 419 | clock-frequency = <100000>; |
| 420 | |
| 421 | pmic@58 { |
| 422 | compatible = "dlg,da9063"; |
| 423 | reg = <0x58>; |
| 424 | interrupt-parent = <&gpio3>; |
| 425 | interrupts = <31 IRQ_TYPE_LEVEL_LOW>; |
| 426 | interrupt-controller; |
| 427 | |
| 428 | onkey { |
| 429 | compatible = "dlg,da9063-onkey"; |
| 430 | }; |
| 431 | |
| 432 | rtc { |
| 433 | compatible = "dlg,da9063-rtc"; |
| 434 | }; |
| 435 | |
Marek Vasut | 2a8450f | 2023-01-26 21:01:32 +0100 | [diff] [blame] | 436 | watchdog { |
Marek Vasut | a44796c | 2019-03-04 22:50:54 +0100 | [diff] [blame] | 437 | compatible = "dlg,da9063-watchdog"; |
| 438 | }; |
| 439 | }; |
| 440 | }; |
| 441 | |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 442 | &mmcif0 { |
| 443 | pinctrl-0 = <&mmcif0_pins>; |
| 444 | pinctrl-names = "default"; |
| 445 | |
| 446 | vmmc-supply = <&d3_3v>; |
| 447 | vqmmc-supply = <&d3_3v>; |
| 448 | bus-width = <8>; |
| 449 | non-removable; |
| 450 | status = "okay"; |
| 451 | }; |
| 452 | |
| 453 | &sdhi1 { |
| 454 | pinctrl-0 = <&sdhi1_pins>; |
| 455 | pinctrl-names = "default"; |
| 456 | |
| 457 | vmmc-supply = <&vcc_sdhi1>; |
| 458 | vqmmc-supply = <&vccq_sdhi1>; |
| 459 | cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; |
| 460 | status = "okay"; |
| 461 | }; |
| 462 | |
| 463 | &qspi { |
| 464 | pinctrl-0 = <&qspi_pins>; |
| 465 | pinctrl-names = "default"; |
| 466 | |
| 467 | status = "okay"; |
| 468 | |
| 469 | flash@0 { |
| 470 | compatible = "spansion,s25fl512s", "jedec,spi-nor"; |
| 471 | reg = <0>; |
| 472 | spi-max-frequency = <30000000>; |
| 473 | spi-tx-bus-width = <4>; |
| 474 | spi-rx-bus-width = <4>; |
| 475 | spi-cpol; |
| 476 | spi-cpha; |
| 477 | m25p,fast-read; |
| 478 | |
| 479 | partitions { |
| 480 | compatible = "fixed-partitions"; |
| 481 | #address-cells = <1>; |
| 482 | #size-cells = <1>; |
| 483 | |
| 484 | partition@0 { |
| 485 | label = "loader"; |
| 486 | reg = <0x00000000 0x00040000>; |
| 487 | read-only; |
| 488 | }; |
| 489 | partition@40000 { |
| 490 | label = "user"; |
| 491 | reg = <0x00040000 0x00400000>; |
| 492 | read-only; |
| 493 | }; |
| 494 | partition@440000 { |
| 495 | label = "flash"; |
| 496 | reg = <0x00440000 0x03bc0000>; |
| 497 | }; |
| 498 | }; |
| 499 | }; |
| 500 | }; |
| 501 | |
| 502 | /* composite video input */ |
| 503 | &vin0 { |
| 504 | status = "okay"; |
| 505 | pinctrl-0 = <&vin0_pins>; |
| 506 | pinctrl-names = "default"; |
| 507 | |
| 508 | port { |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 509 | vin0ep: endpoint { |
| 510 | remote-endpoint = <&adv7180>; |
| 511 | bus-width = <8>; |
| 512 | }; |
| 513 | }; |
| 514 | }; |
| 515 | |
| 516 | &pci0 { |
| 517 | status = "okay"; |
| 518 | pinctrl-0 = <&usb0_pins>; |
| 519 | pinctrl-names = "default"; |
| 520 | }; |
| 521 | |
| 522 | &pci1 { |
| 523 | status = "okay"; |
| 524 | pinctrl-0 = <&usb1_pins>; |
| 525 | pinctrl-names = "default"; |
| 526 | }; |
| 527 | |
| 528 | &usbphy { |
| 529 | status = "okay"; |
| 530 | }; |
| 531 | |
| 532 | &du { |
Marek Vasut | 2a8450f | 2023-01-26 21:01:32 +0100 | [diff] [blame] | 533 | pinctrl-0 = <&du0_pins>, <&du1_pins>; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 534 | pinctrl-names = "default"; |
| 535 | status = "okay"; |
| 536 | |
| 537 | clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, |
| 538 | <&x2_clk>, <&x3_clk>; |
| 539 | clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; |
| 540 | |
| 541 | ports { |
| 542 | port@0 { |
| 543 | endpoint { |
| 544 | remote-endpoint = <&adv7511_in>; |
| 545 | }; |
| 546 | }; |
| 547 | port@1 { |
| 548 | endpoint { |
| 549 | remote-endpoint = <&adv7123_in>; |
| 550 | }; |
| 551 | }; |
| 552 | }; |
| 553 | }; |
| 554 | |
| 555 | &rcar_sound { |
Marek Vasut | 2a8450f | 2023-01-26 21:01:32 +0100 | [diff] [blame] | 556 | pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>; |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 557 | pinctrl-names = "default"; |
| 558 | status = "okay"; |
| 559 | |
| 560 | /* Single DAI */ |
| 561 | #sound-dai-cells = <0>; |
| 562 | |
| 563 | rcar_sound,dai { |
| 564 | dai0 { |
| 565 | playback = <&ssi0>; |
| 566 | capture = <&ssi1>; |
| 567 | }; |
| 568 | }; |
| 569 | }; |
| 570 | |
Marek Vasut | cac4635 | 2018-12-03 21:39:48 +0100 | [diff] [blame] | 571 | &rwdt { |
| 572 | timeout-sec = <60>; |
| 573 | status = "okay"; |
| 574 | }; |
| 575 | |
Marek Vasut | 648559c | 2018-01-07 20:18:28 +0100 | [diff] [blame] | 576 | &ssi1 { |
| 577 | shared-pin; |
| 578 | }; |