Peng Fan | 702c6dc | 2018-10-18 14:28:37 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright 2017-2018 NXP |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "fsl-imx8qxp.dtsi" |
Peng Fan | 24063f9 | 2018-12-21 06:21:26 +0000 | [diff] [blame] | 9 | #include "fsl-imx8qxp-mek-u-boot.dtsi" |
Peng Fan | 702c6dc | 2018-10-18 14:28:37 +0200 | [diff] [blame] | 10 | |
| 11 | / { |
| 12 | model = "Freescale i.MX8QXP MEK"; |
| 13 | compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; |
| 14 | |
| 15 | chosen { |
| 16 | bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200"; |
| 17 | stdout-path = &lpuart0; |
| 18 | }; |
| 19 | |
Fabio Estevam | 53fa5c2 | 2018-10-25 21:49:31 -0300 | [diff] [blame] | 20 | reg_usdhc2_vmmc: regulator-usdhc2-vmmc { |
| 21 | compatible = "regulator-fixed"; |
| 22 | regulator-name = "SD1_SPWR"; |
| 23 | regulator-min-microvolt = <3000000>; |
| 24 | regulator-max-microvolt = <3000000>; |
| 25 | gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>; |
| 26 | off-on-delay = <3480>; |
| 27 | enable-active-high; |
Peng Fan | 702c6dc | 2018-10-18 14:28:37 +0200 | [diff] [blame] | 28 | }; |
| 29 | }; |
| 30 | |
| 31 | &iomuxc { |
| 32 | pinctrl-names = "default"; |
| 33 | pinctrl-0 = <&pinctrl_hog>; |
| 34 | |
| 35 | imx8qxp-mek { |
| 36 | pinctrl_hog: hoggrp { |
| 37 | fsl,pins = < |
| 38 | SC_P_MCLK_OUT0_ADMA_ACM_MCLK_OUT0 0x0600004c |
| 39 | SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 |
| 40 | >; |
| 41 | }; |
| 42 | |
| 43 | pinctrl_ioexp_rst: ioexp-rst-grp { |
| 44 | fsl,pins = < |
| 45 | SC_P_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 |
| 46 | >; |
| 47 | }; |
| 48 | |
| 49 | pinctrl_fec1: fec1grp { |
| 50 | fsl,pins = < |
| 51 | SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000048 |
| 52 | SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000048 |
| 53 | SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000048 |
| 54 | SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000048 |
| 55 | SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000048 |
| 56 | SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000048 |
| 57 | SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000048 |
| 58 | SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000048 |
| 59 | SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000048 |
| 60 | SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000048 |
| 61 | SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000048 |
| 62 | SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000048 |
| 63 | SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000048 |
| 64 | SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000048 |
| 65 | >; |
| 66 | }; |
| 67 | |
| 68 | pinctrl_fec2: fec2grp { |
| 69 | fsl,pins = < |
| 70 | SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL 0x06000048 |
| 71 | SC_P_ESAI0_FSR_CONN_ENET1_RGMII_TXC 0x06000048 |
| 72 | SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0 0x06000048 |
| 73 | SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1 0x06000048 |
| 74 | SC_P_ESAI0_FST_CONN_ENET1_RGMII_TXD2 0x06000048 |
| 75 | SC_P_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3 0x06000048 |
| 76 | SC_P_ESAI0_TX0_CONN_ENET1_RGMII_RXC 0x06000048 |
| 77 | SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL 0x06000048 |
| 78 | SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0 0x06000048 |
| 79 | SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1 0x06000048 |
| 80 | SC_P_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2 0x06000048 |
| 81 | SC_P_ESAI0_TX1_CONN_ENET1_RGMII_RXD3 0x06000048 |
| 82 | >; |
| 83 | }; |
| 84 | |
| 85 | pinctrl_lpi2c1: lpi2c1grp { |
| 86 | fsl,pins = < |
| 87 | SC_P_USB_SS3_TC1_ADMA_I2C1_SCL 0x06000021 |
| 88 | SC_P_USB_SS3_TC3_ADMA_I2C1_SDA 0x06000021 |
| 89 | >; |
| 90 | }; |
| 91 | |
| 92 | pinctrl_lpuart0: lpuart0grp { |
| 93 | fsl,pins = < |
| 94 | SC_P_UART0_RX_ADMA_UART0_RX 0x06000020 |
| 95 | SC_P_UART0_TX_ADMA_UART0_TX 0x06000020 |
| 96 | >; |
| 97 | }; |
| 98 | |
| 99 | pinctrl_usdhc1: usdhc1grp { |
| 100 | fsl,pins = < |
| 101 | SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 |
| 102 | SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 |
| 103 | SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 |
| 104 | SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 |
| 105 | SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 |
| 106 | SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 |
| 107 | SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 |
| 108 | SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 |
| 109 | SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 |
| 110 | SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 |
| 111 | SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 |
| 112 | >; |
| 113 | }; |
| 114 | |
| 115 | pinctrl_usdhc2_gpio: usdhc2gpiogrp { |
| 116 | fsl,pins = < |
| 117 | SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x00000021 |
| 118 | SC_P_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021 |
| 119 | SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021 |
| 120 | >; |
| 121 | }; |
| 122 | |
| 123 | pinctrl_usdhc2: usdhc2grp { |
| 124 | fsl,pins = < |
| 125 | SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 |
| 126 | SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 |
| 127 | SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 |
| 128 | SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 |
| 129 | SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 |
| 130 | SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 |
| 131 | SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 |
| 132 | >; |
| 133 | }; |
| 134 | }; |
| 135 | }; |
| 136 | |
| 137 | &A35_0 { |
Simon Glass | d3a98cb | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 138 | bootph-all; |
Peng Fan | 702c6dc | 2018-10-18 14:28:37 +0200 | [diff] [blame] | 139 | }; |
| 140 | |
| 141 | &lpuart0 { |
| 142 | pinctrl-names = "default"; |
| 143 | pinctrl-0 = <&pinctrl_lpuart0>; |
| 144 | status = "okay"; |
| 145 | }; |
| 146 | |
| 147 | &i2c1 { |
| 148 | clock-frequency = <100000>; |
| 149 | pinctrl-names = "default"; |
| 150 | pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>; |
| 151 | status = "okay"; |
| 152 | |
| 153 | i2cswitch@71 { |
| 154 | compatible = "nxp,pca9646"; |
| 155 | reg = <0x71>; |
| 156 | #address-cells = <1>; |
| 157 | #size-cells = <0>; |
| 158 | reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| 159 | |
| 160 | bb_i2c1: i2c@0 { |
| 161 | #address-cells = <1>; |
| 162 | #size-cells = <0>; |
| 163 | reg = <0x0>; |
| 164 | }; |
| 165 | |
| 166 | mfi_i2c1: i2c@1 { |
| 167 | #address-cells = <1>; |
| 168 | #size-cells = <0>; |
| 169 | reg = <0x1>; |
| 170 | }; |
| 171 | |
| 172 | i2cexp1_i2c1: i2c@2 { |
| 173 | #address-cells = <1>; |
| 174 | #size-cells = <0>; |
| 175 | reg = <0x2>; |
| 176 | }; |
| 177 | |
| 178 | i2cexp2_i2c1: i2c@3 { |
| 179 | #address-cells = <1>; |
| 180 | #size-cells = <0>; |
| 181 | reg = <0x3>; |
| 182 | |
| 183 | pca9557_a: gpio@1a { |
| 184 | compatible = "nxp,pca9557"; |
| 185 | reg = <0x1a>; |
| 186 | gpio-controller; |
| 187 | #gpio-cells = <2>; |
| 188 | }; |
| 189 | pca9557_b: gpio@1d { |
| 190 | compatible = "nxp,pca9557"; |
| 191 | reg = <0x1d>; |
| 192 | gpio-controller; |
| 193 | #gpio-cells = <2>; |
| 194 | }; |
| 195 | }; |
| 196 | }; |
| 197 | }; |
| 198 | |
| 199 | &usdhc1 { |
| 200 | pinctrl-names = "default"; |
| 201 | pinctrl-0 = <&pinctrl_usdhc1>; |
| 202 | bus-width = <8>; |
| 203 | non-removable; |
| 204 | status = "okay"; |
| 205 | }; |
| 206 | |
| 207 | &usdhc2 { |
| 208 | pinctrl-names = "default"; |
| 209 | pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| 210 | bus-width = <4>; |
| 211 | cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; |
| 212 | wp-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; |
| 213 | vmmc-supply = <®_usdhc2_vmmc>; |
| 214 | status = "okay"; |
| 215 | }; |
| 216 | |
| 217 | &fec1 { |
| 218 | pinctrl-names = "default"; |
| 219 | pinctrl-0 = <&pinctrl_fec1>; |
| 220 | phy-mode = "rgmii"; |
| 221 | phy-handle = <ðphy0>; |
| 222 | fsl,ar8031-phy-fixup; |
| 223 | fsl,magic-packet; |
| 224 | status = "okay"; |
| 225 | phy-reset-gpios = <&pca9557_a 4 GPIO_ACTIVE_LOW>; |
| 226 | phy-reset-duration = <10>; |
Andrejs Cainikovs | 0b79b38 | 2019-03-01 13:28:00 +0000 | [diff] [blame] | 227 | phy-reset-post-delay = <150>; |
Peng Fan | 702c6dc | 2018-10-18 14:28:37 +0200 | [diff] [blame] | 228 | |
| 229 | mdio { |
| 230 | #address-cells = <1>; |
| 231 | #size-cells = <0>; |
| 232 | |
| 233 | ethphy0: ethernet-phy@0 { |
| 234 | compatible = "ethernet-phy-ieee802.3-c22"; |
| 235 | reg = <0>; |
| 236 | }; |
| 237 | ethphy1: ethernet-phy@1 { |
| 238 | compatible = "ethernet-phy-ieee802.3-c22"; |
| 239 | reg = <1>; |
| 240 | }; |
| 241 | }; |
| 242 | }; |