Jim Liu | 68d2912 | 2022-05-31 18:14:02 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright (c) 2021 Nuvoton Technology. |
| 4 | */ |
| 5 | |
| 6 | #include <common.h> |
| 7 | #include <dm.h> |
| 8 | #include <spi.h> |
| 9 | #include <clk.h> |
| 10 | #include <asm/gpio.h> |
| 11 | #include <linux/iopoll.h> |
| 12 | |
| 13 | #define MAX_DIV 127 |
| 14 | |
| 15 | /* Register offsets */ |
| 16 | #define PSPI_DATA 0 |
| 17 | #define PSPI_CTL1 2 |
| 18 | #define PSPI_STAT 4 |
| 19 | |
| 20 | /* PSPI_CTL1 fields */ |
| 21 | #define PSPI_CTL1_SPIEN BIT(0) |
| 22 | #define PSPI_CTL1_SCM BIT(7) |
| 23 | #define PSPI_CTL1_SCIDL BIT(8) |
| 24 | #define PSPI_CTL1_SCDV_MASK GENMASK(15, 9) |
| 25 | #define PSPI_CTL1_SCDV_SHIFT 9 |
| 26 | |
| 27 | /* PSPI_STAT fields */ |
| 28 | #define PSPI_STAT_BSY BIT(0) |
| 29 | #define PSPI_STAT_RBF BIT(1) |
| 30 | |
| 31 | struct npcm_pspi_priv { |
| 32 | void __iomem *base; |
| 33 | struct clk clk; |
| 34 | struct gpio_desc cs_gpio; |
| 35 | u32 max_hz; |
| 36 | }; |
| 37 | |
| 38 | static inline void spi_cs_activate(struct udevice *dev) |
| 39 | { |
| 40 | struct udevice *bus = dev->parent; |
| 41 | struct npcm_pspi_priv *priv = dev_get_priv(bus); |
| 42 | |
Jim Liu | d7cb478 | 2023-07-04 16:01:56 +0800 | [diff] [blame] | 43 | dm_gpio_set_value(&priv->cs_gpio, 1); |
Jim Liu | 68d2912 | 2022-05-31 18:14:02 +0800 | [diff] [blame] | 44 | } |
| 45 | |
| 46 | static inline void spi_cs_deactivate(struct udevice *dev) |
| 47 | { |
| 48 | struct udevice *bus = dev->parent; |
| 49 | struct npcm_pspi_priv *priv = dev_get_priv(bus); |
| 50 | |
Jim Liu | d7cb478 | 2023-07-04 16:01:56 +0800 | [diff] [blame] | 51 | dm_gpio_set_value(&priv->cs_gpio, 0); |
Jim Liu | 68d2912 | 2022-05-31 18:14:02 +0800 | [diff] [blame] | 52 | } |
| 53 | |
| 54 | static inline void npcm_pspi_enable(struct npcm_pspi_priv *priv) |
| 55 | { |
| 56 | u16 val; |
| 57 | |
| 58 | val = readw(priv->base + PSPI_CTL1); |
| 59 | val |= PSPI_CTL1_SPIEN; |
| 60 | writew(val, priv->base + PSPI_CTL1); |
| 61 | } |
| 62 | |
| 63 | static inline void npcm_pspi_disable(struct npcm_pspi_priv *priv) |
| 64 | { |
| 65 | u16 val; |
| 66 | |
| 67 | val = readw(priv->base + PSPI_CTL1); |
| 68 | val &= ~PSPI_CTL1_SPIEN; |
| 69 | writew(val, priv->base + PSPI_CTL1); |
| 70 | } |
| 71 | |
| 72 | static int npcm_pspi_xfer(struct udevice *dev, unsigned int bitlen, |
| 73 | const void *dout, void *din, unsigned long flags) |
| 74 | { |
| 75 | struct udevice *bus = dev->parent; |
| 76 | struct npcm_pspi_priv *priv = dev_get_priv(bus); |
| 77 | void __iomem *base = priv->base; |
| 78 | const u8 *tx = dout; |
| 79 | u8 *rx = din; |
| 80 | u32 bytes = bitlen / 8; |
| 81 | u8 tmp; |
| 82 | u32 val; |
| 83 | int i, ret = 0; |
| 84 | |
| 85 | npcm_pspi_enable(priv); |
| 86 | |
| 87 | if (flags & SPI_XFER_BEGIN) |
| 88 | spi_cs_activate(dev); |
| 89 | |
| 90 | for (i = 0; i < bytes; i++) { |
| 91 | /* Making sure we can write */ |
| 92 | ret = readb_poll_timeout(base + PSPI_STAT, val, |
| 93 | !(val & PSPI_STAT_BSY), |
| 94 | 1000000); |
| 95 | if (ret < 0) |
| 96 | break; |
| 97 | |
| 98 | if (tx) |
| 99 | writeb(*tx++, base + PSPI_DATA); |
| 100 | else |
| 101 | writeb(0, base + PSPI_DATA); |
| 102 | |
| 103 | /* Wait till write completed */ |
| 104 | ret = readb_poll_timeout(base + PSPI_STAT, val, |
| 105 | !(val & PSPI_STAT_BSY), |
| 106 | 1000000); |
| 107 | if (ret < 0) |
| 108 | break; |
| 109 | |
| 110 | /* Wait till read buffer full */ |
| 111 | ret = readb_poll_timeout(base + PSPI_STAT, val, |
| 112 | (val & PSPI_STAT_RBF), |
| 113 | 1000000); |
| 114 | if (ret < 0) |
| 115 | break; |
| 116 | |
| 117 | tmp = readb(base + PSPI_DATA); |
| 118 | if (rx) |
| 119 | *rx++ = tmp; |
| 120 | } |
| 121 | |
| 122 | if (flags & SPI_XFER_END) |
| 123 | spi_cs_deactivate(dev); |
| 124 | |
Jim Liu | d7cb478 | 2023-07-04 16:01:56 +0800 | [diff] [blame] | 125 | debug("npcm_pspi_xfer: slave %s:%s dout %08X din %08X bitlen %u\n", |
| 126 | dev->parent->name, dev->name, *(uint *)tx, *(uint *)rx, bitlen); |
| 127 | |
Jim Liu | 68d2912 | 2022-05-31 18:14:02 +0800 | [diff] [blame] | 128 | npcm_pspi_disable(priv); |
| 129 | |
| 130 | return ret; |
| 131 | } |
| 132 | |
| 133 | static int npcm_pspi_set_speed(struct udevice *bus, uint speed) |
| 134 | { |
| 135 | struct npcm_pspi_priv *priv = dev_get_priv(bus); |
| 136 | ulong apb_clock; |
| 137 | u32 divisor; |
| 138 | u16 val; |
| 139 | |
| 140 | apb_clock = clk_get_rate(&priv->clk); |
| 141 | if (!apb_clock) |
| 142 | return -EINVAL; |
| 143 | |
| 144 | if (speed > priv->max_hz) |
| 145 | speed = priv->max_hz; |
| 146 | |
Jim Liu | c2f70d4 | 2023-12-26 10:00:06 +0800 | [diff] [blame] | 147 | divisor = DIV_ROUND_CLOSEST(apb_clock, (2 * speed)) - 1; |
Jim Liu | 68d2912 | 2022-05-31 18:14:02 +0800 | [diff] [blame] | 148 | if (divisor > MAX_DIV) |
| 149 | divisor = MAX_DIV; |
| 150 | |
| 151 | val = readw(priv->base + PSPI_CTL1); |
| 152 | val &= ~PSPI_CTL1_SCDV_MASK; |
| 153 | val |= divisor << PSPI_CTL1_SCDV_SHIFT; |
| 154 | writew(val, priv->base + PSPI_CTL1); |
| 155 | |
| 156 | debug("%s: apb_clock=%lu speed=%d divisor=%u\n", |
| 157 | __func__, apb_clock, speed, divisor); |
| 158 | |
| 159 | return 0; |
| 160 | } |
| 161 | |
| 162 | static int npcm_pspi_set_mode(struct udevice *bus, uint mode) |
| 163 | { |
| 164 | struct npcm_pspi_priv *priv = dev_get_priv(bus); |
| 165 | u16 pspi_mode, val; |
| 166 | |
| 167 | switch (mode & (SPI_CPOL | SPI_CPHA)) { |
| 168 | case SPI_MODE_0: |
| 169 | pspi_mode = 0; |
| 170 | break; |
| 171 | case SPI_MODE_1: |
| 172 | pspi_mode = PSPI_CTL1_SCM; |
| 173 | break; |
| 174 | case SPI_MODE_2: |
| 175 | pspi_mode = PSPI_CTL1_SCIDL; |
| 176 | break; |
| 177 | case SPI_MODE_3: |
| 178 | pspi_mode = PSPI_CTL1_SCIDL | PSPI_CTL1_SCM; |
| 179 | break; |
| 180 | default: |
| 181 | break; |
| 182 | } |
| 183 | |
| 184 | val = readw(priv->base + PSPI_CTL1); |
| 185 | val &= ~(PSPI_CTL1_SCIDL | PSPI_CTL1_SCM); |
| 186 | val |= pspi_mode; |
| 187 | writew(val, priv->base + PSPI_CTL1); |
| 188 | |
Jim Liu | d7cb478 | 2023-07-04 16:01:56 +0800 | [diff] [blame] | 189 | debug("%s: mode=%u\n", __func__, mode); |
Jim Liu | 68d2912 | 2022-05-31 18:14:02 +0800 | [diff] [blame] | 190 | return 0; |
| 191 | } |
| 192 | |
| 193 | static int npcm_pspi_probe(struct udevice *bus) |
| 194 | { |
| 195 | struct npcm_pspi_priv *priv = dev_get_priv(bus); |
| 196 | int node = dev_of_offset(bus); |
| 197 | int ret; |
| 198 | |
| 199 | ret = clk_get_by_index(bus, 0, &priv->clk); |
| 200 | if (ret < 0) |
| 201 | return ret; |
| 202 | |
| 203 | priv->base = dev_read_addr_ptr(bus); |
Jim Liu | d7cb478 | 2023-07-04 16:01:56 +0800 | [diff] [blame] | 204 | priv->max_hz = dev_read_u32_default(bus, "spi-max-frequency", 1000000); |
Jim Liu | 68d2912 | 2022-05-31 18:14:02 +0800 | [diff] [blame] | 205 | gpio_request_by_name_nodev(offset_to_ofnode(node), "cs-gpios", 0, |
Jim Liu | d7cb478 | 2023-07-04 16:01:56 +0800 | [diff] [blame] | 206 | &priv->cs_gpio, GPIOD_IS_OUT| GPIOD_ACTIVE_LOW); |
Jim Liu | 68d2912 | 2022-05-31 18:14:02 +0800 | [diff] [blame] | 207 | |
| 208 | return 0; |
| 209 | } |
| 210 | |
| 211 | static const struct dm_spi_ops npcm_pspi_ops = { |
| 212 | .xfer = npcm_pspi_xfer, |
| 213 | .set_speed = npcm_pspi_set_speed, |
| 214 | .set_mode = npcm_pspi_set_mode, |
| 215 | }; |
| 216 | |
| 217 | static const struct udevice_id npcm_pspi_ids[] = { |
| 218 | { .compatible = "nuvoton,npcm845-pspi"}, |
| 219 | { .compatible = "nuvoton,npcm750-pspi"}, |
| 220 | { } |
| 221 | }; |
| 222 | |
| 223 | U_BOOT_DRIVER(npcm_pspi) = { |
| 224 | .name = "npcm_pspi", |
| 225 | .id = UCLASS_SPI, |
| 226 | .of_match = npcm_pspi_ids, |
| 227 | .ops = &npcm_pspi_ops, |
| 228 | .priv_auto = sizeof(struct npcm_pspi_priv), |
| 229 | .probe = npcm_pspi_probe, |
| 230 | }; |