Marek Vasut | f670cd7 | 2022-05-21 16:56:26 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2021-2022 Marek Vasut <marex@denx.de> |
| 4 | */ |
| 5 | |
| 6 | #include "imx8mp.dtsi" |
| 7 | |
| 8 | / { |
| 9 | model = "DH electronics i.MX8M Plus DHCOM SoM"; |
| 10 | compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp"; |
| 11 | |
| 12 | aliases { |
| 13 | ethernet0 = &eqos; |
| 14 | ethernet1 = &fec; |
| 15 | rtc0 = &rv3032; |
| 16 | rtc1 = &snvs_rtc; |
| 17 | spi0 = &flexspi; |
| 18 | }; |
| 19 | |
| 20 | memory@40000000 { |
| 21 | device_type = "memory"; |
| 22 | /* Memory size 512 MiB..8 GiB will be filled by U-Boot */ |
| 23 | reg = <0x0 0x40000000 0 0x08000000>; |
| 24 | }; |
| 25 | |
| 26 | reg_eth_vio: regulator-eth-vio { |
| 27 | compatible = "regulator-fixed"; |
| 28 | gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; |
| 29 | pinctrl-0 = <&pinctrl_enet_vio>; |
| 30 | pinctrl-names = "default"; |
| 31 | regulator-always-on; |
| 32 | regulator-boot-on; |
| 33 | regulator-min-microvolt = <3300000>; |
| 34 | regulator-max-microvolt = <3300000>; |
| 35 | regulator-name = "eth_vio"; |
| 36 | vin-supply = <&buck4>; |
| 37 | }; |
| 38 | |
| 39 | reg_usdhc2_vmmc: regulator-usdhc2-vmmc { |
| 40 | compatible = "regulator-fixed"; |
| 41 | enable-active-high; |
| 42 | gpio = <&gpio2 19 0>; /* SD2_RESET */ |
| 43 | off-on-delay-us = <12000>; |
| 44 | pinctrl-names = "default"; |
| 45 | pinctrl-0 = <&pinctrl_usdhc2_vmmc>; |
| 46 | regulator-max-microvolt = <3300000>; |
| 47 | regulator-min-microvolt = <3300000>; |
| 48 | regulator-name = "VDD_3V3_SD"; |
| 49 | startup-delay-us = <100>; |
| 50 | vin-supply = <&buck4>; |
| 51 | }; |
| 52 | }; |
| 53 | |
| 54 | &A53_0 { |
| 55 | cpu-supply = <&buck2>; |
| 56 | }; |
| 57 | |
| 58 | &A53_1 { |
| 59 | cpu-supply = <&buck2>; |
| 60 | }; |
| 61 | |
| 62 | &A53_2 { |
| 63 | cpu-supply = <&buck2>; |
| 64 | }; |
| 65 | |
| 66 | &A53_3 { |
| 67 | cpu-supply = <&buck2>; |
| 68 | }; |
| 69 | |
| 70 | &ecspi1 { |
| 71 | pinctrl-names = "default"; |
| 72 | pinctrl-0 = <&pinctrl_ecspi1>; |
Marek Vasut | eee69bd | 2022-08-12 22:41:54 +0200 | [diff] [blame] | 73 | cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; |
Marek Vasut | f670cd7 | 2022-05-21 16:56:26 +0200 | [diff] [blame] | 74 | status = "disabled"; |
| 75 | }; |
| 76 | |
| 77 | &ecspi2 { |
| 78 | pinctrl-names = "default"; |
| 79 | pinctrl-0 = <&pinctrl_ecspi2>; |
| 80 | cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; |
| 81 | status = "disabled"; |
| 82 | }; |
| 83 | |
| 84 | &eqos { /* First ethernet */ |
| 85 | pinctrl-names = "default"; |
| 86 | pinctrl-0 = <&pinctrl_eqos>; |
| 87 | phy-handle = <ðphy0g>; |
| 88 | phy-mode = "rgmii-id"; |
| 89 | status = "okay"; |
| 90 | |
| 91 | mdio { |
| 92 | compatible = "snps,dwmac-mdio"; |
| 93 | #address-cells = <1>; |
| 94 | #size-cells = <0>; |
| 95 | |
| 96 | /* Up to one of these two PHYs may be populated. */ |
| 97 | ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */ |
| 98 | compatible = "ethernet-phy-id0007.c110", |
| 99 | "ethernet-phy-ieee802.3-c22"; |
| 100 | interrupt-parent = <&gpio3>; |
| 101 | interrupts = <19 IRQ_TYPE_LEVEL_LOW>; |
| 102 | pinctrl-0 = <&pinctrl_ethphy0>; |
| 103 | pinctrl-names = "default"; |
| 104 | reg = <1>; |
| 105 | reset-assert-us = <1000>; |
| 106 | reset-deassert-us = <1000>; |
| 107 | reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; |
| 108 | /* Non-default PHY population option. */ |
| 109 | status = "disabled"; |
| 110 | }; |
| 111 | |
| 112 | ethphy0g: ethernet-phy@5 { /* Micrel KSZ9131RNXI */ |
| 113 | compatible = "ethernet-phy-id0022.1642", |
| 114 | "ethernet-phy-ieee802.3-c22"; |
| 115 | interrupt-parent = <&gpio3>; |
| 116 | interrupts = <19 IRQ_TYPE_LEVEL_LOW>; |
| 117 | micrel,led-mode = <0>; |
| 118 | pinctrl-0 = <&pinctrl_ethphy0>; |
| 119 | pinctrl-names = "default"; |
| 120 | reg = <5>; |
| 121 | reset-assert-us = <1000>; |
| 122 | reset-deassert-us = <1000>; |
| 123 | reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; |
| 124 | /* Default PHY population option. */ |
| 125 | status = "okay"; |
| 126 | }; |
| 127 | }; |
| 128 | }; |
| 129 | |
| 130 | &fec { /* Second ethernet */ |
| 131 | pinctrl-names = "default"; |
| 132 | pinctrl-0 = <&pinctrl_fec>; |
| 133 | phy-handle = <ðphy1f>; |
| 134 | phy-mode = "rgmii"; |
| 135 | fsl,magic-packet; |
| 136 | status = "okay"; |
| 137 | |
| 138 | mdio { |
| 139 | #address-cells = <1>; |
| 140 | #size-cells = <0>; |
| 141 | |
| 142 | /* Up to one PHY may be populated. */ |
| 143 | ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */ |
| 144 | compatible = "ethernet-phy-id0007.c110", |
| 145 | "ethernet-phy-ieee802.3-c22"; |
| 146 | interrupt-parent = <&gpio4>; |
| 147 | interrupts = <3 IRQ_TYPE_LEVEL_LOW>; |
| 148 | pinctrl-0 = <&pinctrl_ethphy1>; |
| 149 | pinctrl-names = "default"; |
| 150 | reg = <1>; |
| 151 | reset-assert-us = <1000>; |
| 152 | reset-deassert-us = <1000>; |
| 153 | reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; |
| 154 | /* Non-default PHY population option. */ |
| 155 | status = "disabled"; |
| 156 | }; |
| 157 | }; |
| 158 | }; |
| 159 | |
| 160 | &flexcan1 { |
| 161 | pinctrl-names = "default"; |
| 162 | pinctrl-0 = <&pinctrl_flexcan1>; |
| 163 | status = "disabled"; |
| 164 | }; |
| 165 | |
| 166 | &flexcan2 { |
| 167 | pinctrl-names = "default"; |
| 168 | pinctrl-0 = <&pinctrl_flexcan2>; |
| 169 | status = "disabled"; |
| 170 | }; |
| 171 | |
| 172 | &flexspi { |
| 173 | pinctrl-names = "default"; |
| 174 | pinctrl-0 = <&pinctrl_flexspi>; |
| 175 | status = "okay"; |
| 176 | |
| 177 | flash@0 { /* W25Q128JWPIM */ |
| 178 | compatible = "jedec,spi-nor"; |
| 179 | reg = <0>; |
| 180 | spi-max-frequency = <80000000>; |
| 181 | spi-tx-bus-width = <4>; |
| 182 | spi-rx-bus-width = <4>; |
| 183 | }; |
| 184 | }; |
| 185 | |
| 186 | &gpio1 { |
| 187 | gpio-line-names = |
| 188 | "DHCOM-G", "", "", "", "", "DHCOM-I", "DHCOM-J", "DHCOM-L", |
| 189 | "DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "", |
| 190 | "", "", "", "", "", "", "", "", |
| 191 | "", "", "", "", "", "", "", ""; |
| 192 | }; |
| 193 | |
| 194 | &gpio2 { |
| 195 | gpio-line-names = |
| 196 | "", "", "", "", "", "", "", "", |
| 197 | "", "", "", "DHCOM-K", "", "", "", "", |
| 198 | "", "", "", "", "DHCOM-INT", "", "", "", |
| 199 | "", "", "", "", "", "", "", ""; |
| 200 | }; |
| 201 | |
| 202 | &gpio3 { |
| 203 | gpio-line-names = |
| 204 | "", "", "", "", "", "", "", "", |
| 205 | "", "", "", "", "", "", "SOM-HW0", "", |
| 206 | "", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1", |
| 207 | "SOM-MEM2", "SOM-HW2", "", "", "", "", "", ""; |
| 208 | }; |
| 209 | |
| 210 | &gpio4 { |
| 211 | gpio-line-names = |
| 212 | "", "", "", "", "", "", "", "", |
| 213 | "", "", "", "", "", "", "", "", |
| 214 | "", "", "", "SOM-HW1", "", "", "", "", |
| 215 | "", "", "", "DHCOM-D", "", "", "", ""; |
| 216 | }; |
| 217 | |
| 218 | &gpio5 { |
| 219 | gpio-line-names = |
| 220 | "", "", "DHCOM-C", "", "", "", "", "", |
| 221 | "", "", "", "", "", "", "", "", |
| 222 | "", "", "", "", "", "", "DHCOM-E", "DHCOM-F", |
| 223 | "", "", "", "", "", "", "", ""; |
| 224 | }; |
| 225 | |
| 226 | &i2c3 { |
| 227 | /* |
| 228 | * iMX8MP 1P33A Errata ERR007805 |
| 229 | * I2C is limited to 384 kHz due to SoC bug. |
| 230 | */ |
| 231 | clock-frequency = <100000>; |
| 232 | pinctrl-names = "default", "gpio"; |
| 233 | pinctrl-0 = <&pinctrl_i2c3>; |
| 234 | pinctrl-1 = <&pinctrl_i2c3_gpio>; |
| 235 | scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 236 | sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 237 | status = "okay"; |
| 238 | |
| 239 | pmic: pmic@25 { |
| 240 | compatible = "nxp,pca9450c"; |
| 241 | reg = <0x25>; |
| 242 | pinctrl-names = "default"; |
| 243 | pinctrl-0 = <&pinctrl_pmic>; |
| 244 | interrupt-parent = <&gpio1>; |
| 245 | interrupts = <3 IRQ_TYPE_LEVEL_LOW>; |
| 246 | sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
| 247 | |
| 248 | /* |
| 249 | * i.MX 8M Plus Data Sheet for Consumer Products |
| 250 | * 3.1.4 Operating ranges |
| 251 | * MIMX8ML8CVNKZAB |
| 252 | */ |
| 253 | regulators { |
| 254 | buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */ |
| 255 | regulator-compatible = "BUCK1"; |
| 256 | regulator-min-microvolt = <850000>; |
| 257 | regulator-max-microvolt = <1000000>; |
| 258 | regulator-ramp-delay = <3125>; |
| 259 | regulator-always-on; |
| 260 | regulator-boot-on; |
| 261 | }; |
| 262 | |
| 263 | buck2: BUCK2 { /* VDD_ARM */ |
| 264 | regulator-compatible = "BUCK2"; |
| 265 | regulator-min-microvolt = <850000>; |
| 266 | regulator-max-microvolt = <1000000>; |
| 267 | regulator-ramp-delay = <3125>; |
| 268 | regulator-always-on; |
| 269 | regulator-boot-on; |
| 270 | }; |
| 271 | |
| 272 | buck4: BUCK4 { /* VDD_3V3 */ |
| 273 | regulator-compatible = "BUCK4"; |
| 274 | regulator-min-microvolt = <3300000>; |
| 275 | regulator-max-microvolt = <3300000>; |
| 276 | regulator-always-on; |
| 277 | regulator-boot-on; |
| 278 | }; |
| 279 | |
| 280 | buck5: BUCK5 { /* VDD_1V8 */ |
| 281 | regulator-compatible = "BUCK5"; |
| 282 | regulator-min-microvolt = <1800000>; |
| 283 | regulator-max-microvolt = <1800000>; |
| 284 | regulator-always-on; |
| 285 | regulator-boot-on; |
| 286 | }; |
| 287 | |
| 288 | buck6: BUCK6 { /* NVCC_DRAM_1V1 */ |
| 289 | regulator-compatible = "BUCK6"; |
| 290 | regulator-min-microvolt = <1100000>; |
| 291 | regulator-max-microvolt = <1100000>; |
| 292 | regulator-always-on; |
| 293 | regulator-boot-on; |
| 294 | }; |
| 295 | |
| 296 | ldo1: LDO1 { /* NVCC_SNVS_1V8 */ |
| 297 | regulator-compatible = "LDO1"; |
| 298 | regulator-min-microvolt = <1800000>; |
| 299 | regulator-max-microvolt = <1800000>; |
| 300 | regulator-always-on; |
| 301 | regulator-boot-on; |
| 302 | }; |
| 303 | |
| 304 | ldo3: LDO3 { /* VDDA_1V8 */ |
| 305 | regulator-compatible = "LDO3"; |
| 306 | regulator-min-microvolt = <1800000>; |
| 307 | regulator-max-microvolt = <1800000>; |
| 308 | regulator-always-on; |
| 309 | regulator-boot-on; |
| 310 | }; |
| 311 | |
| 312 | ldo4: LDO4 { /* PMIC_LDO4 */ |
| 313 | regulator-compatible = "LDO4"; |
| 314 | regulator-min-microvolt = <3300000>; |
| 315 | regulator-max-microvolt = <3300000>; |
| 316 | }; |
| 317 | |
| 318 | ldo5: LDO5 { /* NVCC_SD2 */ |
| 319 | regulator-compatible = "LDO5"; |
| 320 | regulator-min-microvolt = <1800000>; |
| 321 | regulator-max-microvolt = <3300000>; |
| 322 | }; |
| 323 | }; |
| 324 | }; |
| 325 | |
| 326 | adc@48 { |
| 327 | compatible = "ti,tla2024"; |
| 328 | reg = <0x48>; |
| 329 | #address-cells = <1>; |
| 330 | #size-cells = <0>; |
| 331 | |
| 332 | channel@0 { /* Voltage over AIN0 and AIN1. */ |
| 333 | reg = <0>; |
| 334 | }; |
| 335 | |
| 336 | channel@1 { /* Voltage over AIN0 and AIN3. */ |
| 337 | reg = <1>; |
| 338 | }; |
| 339 | |
| 340 | channel@2 { /* Voltage over AIN1 and AIN3. */ |
| 341 | reg = <2>; |
| 342 | }; |
| 343 | |
| 344 | channel@3 { /* Voltage over AIN2 and AIN3. */ |
| 345 | reg = <3>; |
| 346 | }; |
| 347 | |
| 348 | channel@4 { /* Voltage over AIN0 and GND. */ |
| 349 | reg = <4>; |
| 350 | }; |
| 351 | |
| 352 | channel@5 { /* Voltage over AIN1 and GND. */ |
| 353 | reg = <5>; |
| 354 | }; |
| 355 | |
| 356 | channel@6 { /* Voltage over AIN2 and GND. */ |
| 357 | reg = <6>; |
| 358 | }; |
| 359 | |
| 360 | channel@7 { /* Voltage over AIN3 and GND. */ |
| 361 | reg = <7>; |
| 362 | }; |
| 363 | }; |
| 364 | |
| 365 | touchscreen@49 { |
| 366 | compatible = "ti,tsc2004"; |
| 367 | reg = <0x49>; |
| 368 | interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>; |
| 369 | pinctrl-names = "default"; |
| 370 | pinctrl-0 = <&pinctrl_touch>; |
| 371 | vio-supply = <&buck4>; |
| 372 | }; |
| 373 | |
| 374 | eeprom0: eeprom@50 { /* EEPROM with EQoS MAC address */ |
| 375 | compatible = "atmel,24c02"; |
| 376 | pagesize = <16>; |
| 377 | reg = <0x50>; |
| 378 | }; |
| 379 | |
| 380 | rv3032: rtc@51 { |
| 381 | compatible = "microcrystal,rv3032"; |
| 382 | reg = <0x51>; |
| 383 | interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>; |
| 384 | pinctrl-names = "default"; |
| 385 | pinctrl-0 = <&pinctrl_rtc>; |
| 386 | }; |
| 387 | |
| 388 | eeprom1: eeprom@53 { /* EEPROM with FEC MAC address */ |
| 389 | compatible = "atmel,24c02"; |
| 390 | pagesize = <16>; |
| 391 | reg = <0x53>; |
| 392 | }; |
| 393 | }; |
| 394 | |
| 395 | &i2c4 { |
| 396 | /* |
| 397 | * iMX8MP 1P33A Errata ERR007805 |
| 398 | * I2C is limited to 384 kHz due to SoC bug. |
| 399 | */ |
| 400 | clock-frequency = <100000>; |
| 401 | pinctrl-names = "default", "gpio"; |
| 402 | pinctrl-0 = <&pinctrl_i2c4>; |
| 403 | pinctrl-1 = <&pinctrl_i2c4_gpio>; |
| 404 | scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 405 | sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 406 | status = "okay"; |
| 407 | }; |
| 408 | |
| 409 | &i2c5 { /* HDMI EDID bus */ |
| 410 | /* |
| 411 | * iMX8MP 1P33A Errata ERR007805 |
| 412 | * I2C is limited to 384 kHz due to SoC bug. |
| 413 | */ |
| 414 | clock-frequency = <100000>; |
| 415 | pinctrl-names = "default", "gpio"; |
| 416 | pinctrl-0 = <&pinctrl_i2c5>; |
| 417 | pinctrl-1 = <&pinctrl_i2c5_gpio>; |
Marek Vasut | cd7b1a8 | 2022-08-12 22:41:55 +0200 | [diff] [blame] | 418 | scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 419 | sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
Marek Vasut | f670cd7 | 2022-05-21 16:56:26 +0200 | [diff] [blame] | 420 | status = "okay"; |
| 421 | }; |
| 422 | |
| 423 | &pwm1 { |
| 424 | pinctrl-0 = <&pinctrl_pwm1>; |
| 425 | pinctrl-names = "default"; |
| 426 | status = "disabled"; |
| 427 | }; |
| 428 | |
| 429 | &uart1 { |
| 430 | /* CA53 console */ |
| 431 | pinctrl-names = "default"; |
| 432 | pinctrl-0 = <&pinctrl_uart1>; |
| 433 | status = "okay"; |
| 434 | }; |
| 435 | |
| 436 | &uart2 { |
| 437 | /* Bluetooth */ |
| 438 | pinctrl-names = "default"; |
| 439 | pinctrl-0 = <&pinctrl_uart2>; |
| 440 | uart-has-rtscts; |
| 441 | status = "okay"; |
| 442 | }; |
| 443 | |
| 444 | &uart3 { |
| 445 | pinctrl-names = "default"; |
| 446 | pinctrl-0 = <&pinctrl_uart3>; |
| 447 | uart-has-rtscts; |
| 448 | status = "okay"; |
| 449 | }; |
| 450 | |
| 451 | &uart4 { |
| 452 | pinctrl-names = "default"; |
| 453 | pinctrl-0 = <&pinctrl_uart4>; |
| 454 | status = "okay"; |
| 455 | }; |
| 456 | |
| 457 | &usb3_phy0 { |
| 458 | status = "okay"; |
| 459 | }; |
| 460 | |
| 461 | &usb3_0 { |
| 462 | status = "okay"; |
| 463 | }; |
| 464 | |
| 465 | &usb_dwc3_0 { |
| 466 | pinctrl-names = "default"; |
| 467 | pinctrl-0 = <&pinctrl_usb0_vbus>; |
| 468 | dr_mode = "otg"; |
| 469 | status = "okay"; |
| 470 | }; |
| 471 | |
| 472 | &usb3_phy1 { |
| 473 | status = "okay"; |
| 474 | }; |
| 475 | |
| 476 | &usb3_1 { |
| 477 | status = "okay"; |
| 478 | }; |
| 479 | |
| 480 | &usb_dwc3_1 { |
| 481 | pinctrl-names = "default"; |
| 482 | pinctrl-0 = <&pinctrl_usb1_vbus>; |
| 483 | dr_mode = "host"; |
| 484 | status = "okay"; |
| 485 | }; |
| 486 | |
| 487 | /* SDIO WiFi */ |
| 488 | &usdhc1 { |
| 489 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 490 | pinctrl-0 = <&pinctrl_usdhc1>; |
| 491 | pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| 492 | pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| 493 | vmmc-supply = <&buck4>; |
| 494 | bus-width = <4>; |
| 495 | non-removable; |
| 496 | cap-power-off-card; |
| 497 | keep-power-in-suspend; |
| 498 | status = "okay"; |
| 499 | |
| 500 | #address-cells = <1>; |
| 501 | #size-cells = <0>; |
| 502 | |
| 503 | brcmf: bcrmf@1 { /* muRata 2AE */ |
| 504 | reg = <1>; |
| 505 | compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac"; |
| 506 | /* |
| 507 | * The "host-wake" interrupt output is by default not |
| 508 | * connected to the SoC, but can be connected on to |
| 509 | * SoC pin on the carrier board. |
| 510 | */ |
| 511 | reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
| 512 | }; |
| 513 | }; |
| 514 | |
| 515 | /* SD slot */ |
| 516 | &usdhc2 { |
| 517 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 518 | pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| 519 | pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| 520 | pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| 521 | cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| 522 | vmmc-supply = <®_usdhc2_vmmc>; |
| 523 | bus-width = <4>; |
| 524 | status = "okay"; |
| 525 | }; |
| 526 | |
| 527 | /* eMMC */ |
| 528 | &usdhc3 { |
| 529 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 530 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 531 | pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| 532 | pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| 533 | vmmc-supply = <&buck4>; |
| 534 | vqmmc-supply = <&buck5>; |
| 535 | bus-width = <8>; |
| 536 | non-removable; |
| 537 | status = "okay"; |
| 538 | }; |
| 539 | |
| 540 | &wdog1 { |
| 541 | pinctrl-names = "default"; |
| 542 | pinctrl-0 = <&pinctrl_wdog>; |
| 543 | fsl,ext-reset-output; |
| 544 | status = "okay"; |
| 545 | }; |
| 546 | |
| 547 | &iomuxc { |
| 548 | pinctrl-0 = <&pinctrl_hog_base |
| 549 | &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c |
| 550 | &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f |
| 551 | &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i |
| 552 | &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l |
| 553 | /* GPIO_M is connected to CLKOUT2 */ |
| 554 | &pinctrl_dhcom_int>; |
| 555 | pinctrl-names = "default"; |
| 556 | |
| 557 | pinctrl_dhcom_a: dhcom-a-grp { |
| 558 | fsl,pins = < |
| 559 | /* ENET_QOS_EVENT0-OUT */ |
| 560 | MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x2 |
| 561 | >; |
| 562 | }; |
| 563 | |
| 564 | pinctrl_dhcom_b: dhcom-b-grp { |
| 565 | fsl,pins = < |
| 566 | /* ENET_QOS_EVENT0-IN */ |
| 567 | MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x2 |
| 568 | >; |
| 569 | }; |
| 570 | |
| 571 | pinctrl_dhcom_c: dhcom-c-grp { |
| 572 | fsl,pins = < |
| 573 | /* GPIO_C */ |
| 574 | MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x2 |
| 575 | >; |
| 576 | }; |
| 577 | |
| 578 | pinctrl_dhcom_d: dhcom-d-grp { |
| 579 | fsl,pins = < |
| 580 | /* GPIO_D */ |
| 581 | MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x2 |
| 582 | >; |
| 583 | }; |
| 584 | |
| 585 | pinctrl_dhcom_e: dhcom-e-grp { |
| 586 | fsl,pins = < |
| 587 | /* GPIO_E */ |
| 588 | MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x2 |
| 589 | >; |
| 590 | }; |
| 591 | |
| 592 | pinctrl_dhcom_f: dhcom-f-grp { |
| 593 | fsl,pins = < |
| 594 | /* GPIO_F */ |
| 595 | MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x2 |
| 596 | >; |
| 597 | }; |
| 598 | |
| 599 | pinctrl_dhcom_g: dhcom-g-grp { |
| 600 | fsl,pins = < |
| 601 | /* GPIO_G */ |
| 602 | MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x2 |
| 603 | >; |
| 604 | }; |
| 605 | |
| 606 | pinctrl_dhcom_h: dhcom-h-grp { |
| 607 | fsl,pins = < |
| 608 | /* GPIO_H */ |
| 609 | MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x2 |
| 610 | >; |
| 611 | }; |
| 612 | |
| 613 | pinctrl_dhcom_i: dhcom-i-grp { |
| 614 | fsl,pins = < |
| 615 | /* CSI1_SYNC */ |
| 616 | MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2 |
| 617 | >; |
| 618 | }; |
| 619 | |
| 620 | pinctrl_dhcom_j: dhcom-j-grp { |
| 621 | fsl,pins = < |
| 622 | /* CSIx_#RST */ |
| 623 | MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x2 |
| 624 | >; |
| 625 | }; |
| 626 | |
| 627 | pinctrl_dhcom_k: dhcom-k-grp { |
| 628 | fsl,pins = < |
| 629 | /* CSIx_PWDN */ |
| 630 | MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x2 |
| 631 | >; |
| 632 | }; |
| 633 | |
| 634 | pinctrl_dhcom_l: dhcom-l-grp { |
| 635 | fsl,pins = < |
| 636 | /* CSI2_SYNC */ |
| 637 | MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x2 |
| 638 | >; |
| 639 | }; |
| 640 | |
| 641 | pinctrl_dhcom_int: dhcom-int-grp { |
| 642 | fsl,pins = < |
| 643 | /* INT_HIGHEST_PRIO */ |
| 644 | MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x2 |
| 645 | >; |
| 646 | }; |
| 647 | |
| 648 | pinctrl_hog_base: dhcom-hog-base-grp { |
| 649 | fsl,pins = < |
| 650 | /* GPIOs for memory coding */ |
| 651 | MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x40000080 |
| 652 | MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x40000080 |
| 653 | MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x40000080 |
| 654 | /* GPIOs for hardware coding */ |
| 655 | MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000080 |
| 656 | MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000080 |
| 657 | MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x40000080 |
| 658 | >; |
| 659 | }; |
| 660 | |
| 661 | pinctrl_ecspi1: dhcom-ecspi1-grp { |
| 662 | fsl,pins = < |
Marek Vasut | eee69bd | 2022-08-12 22:41:54 +0200 | [diff] [blame] | 663 | MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK 0x44 |
| 664 | MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI 0x44 |
| 665 | MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO 0x44 |
| 666 | MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x40 |
Marek Vasut | f670cd7 | 2022-05-21 16:56:26 +0200 | [diff] [blame] | 667 | >; |
| 668 | }; |
| 669 | |
| 670 | pinctrl_ecspi2: dhcom-ecspi2-grp { |
| 671 | fsl,pins = < |
| 672 | MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 |
| 673 | MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 |
| 674 | MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 |
| 675 | MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 |
| 676 | >; |
| 677 | }; |
| 678 | |
| 679 | pinctrl_eqos: dhcom-eqos-grp { /* RGMII */ |
| 680 | fsl,pins = < |
| 681 | MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 |
| 682 | MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 |
| 683 | MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f |
| 684 | MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f |
| 685 | MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f |
| 686 | MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f |
| 687 | MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f |
| 688 | MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f |
| 689 | MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 |
| 690 | MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 |
| 691 | MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 |
| 692 | MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 |
| 693 | MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 |
| 694 | MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 |
| 695 | >; |
| 696 | }; |
| 697 | |
| 698 | pinctrl_enet_vio: dhcom-enet-vio-grp { |
| 699 | fsl,pins = < |
| 700 | MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22 |
| 701 | >; |
| 702 | }; |
| 703 | |
| 704 | pinctrl_ethphy0: dhcom-ethphy0-grp { |
| 705 | fsl,pins = < |
| 706 | /* ENET1_#RST Reset */ |
| 707 | MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22 |
| 708 | /* ENET1_#INT Interrupt */ |
| 709 | MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22 |
| 710 | >; |
| 711 | }; |
| 712 | |
| 713 | pinctrl_ethphy1: dhcom-ethphy1-grp { |
| 714 | fsl,pins = < |
| 715 | /* ENET1_#RST Reset */ |
| 716 | MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x11 |
| 717 | /* ENET1_#INT Interrupt */ |
| 718 | MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x11 |
| 719 | >; |
| 720 | }; |
| 721 | |
| 722 | pinctrl_fec: dhcom-fec-grp { |
| 723 | fsl,pins = < |
| 724 | MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x1f |
| 725 | MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 |
| 726 | MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 |
| 727 | MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 |
| 728 | MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 |
| 729 | MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 |
| 730 | MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 |
| 731 | MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 |
| 732 | MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 |
| 733 | MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f |
| 734 | MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f |
| 735 | MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f |
| 736 | MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f |
| 737 | MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f |
| 738 | MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f |
| 739 | MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x1f |
| 740 | >; |
| 741 | }; |
| 742 | |
| 743 | pinctrl_flexcan1: dhcom-flexcan1-grp { |
| 744 | fsl,pins = < |
| 745 | MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 |
| 746 | MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 |
| 747 | >; |
| 748 | }; |
| 749 | |
| 750 | pinctrl_flexcan2: dhcom-flexcan2-grp { |
| 751 | fsl,pins = < |
| 752 | MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154 |
| 753 | MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x154 |
| 754 | >; |
| 755 | }; |
| 756 | |
| 757 | pinctrl_flexspi: dhcom-flexspi-grp { |
| 758 | fsl,pins = < |
| 759 | MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2 |
| 760 | MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82 |
| 761 | MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82 |
| 762 | MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82 |
| 763 | MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82 |
| 764 | MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82 |
| 765 | >; |
| 766 | }; |
| 767 | |
| 768 | pinctrl_hdmi: dhcom-hdmi-grp { |
| 769 | fsl,pins = < |
| 770 | MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154 |
| 771 | MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154 |
| 772 | >; |
| 773 | }; |
| 774 | |
| 775 | pinctrl_i2c3: dhcom-i2c3-grp { |
| 776 | fsl,pins = < |
| 777 | MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084 |
| 778 | MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084 |
| 779 | >; |
| 780 | }; |
| 781 | |
| 782 | pinctrl_i2c3_gpio: dhcom-i2c3-gpio-grp { |
| 783 | fsl,pins = < |
| 784 | MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84 |
| 785 | MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84 |
| 786 | >; |
| 787 | }; |
| 788 | |
| 789 | pinctrl_i2c4: dhcom-i2c4-grp { |
| 790 | fsl,pins = < |
| 791 | MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x40000084 |
| 792 | MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x40000084 |
| 793 | >; |
| 794 | }; |
| 795 | |
| 796 | pinctrl_i2c4_gpio: dhcom-i2c4-gpio-grp { |
| 797 | fsl,pins = < |
| 798 | MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x84 |
| 799 | MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x84 |
| 800 | >; |
| 801 | }; |
| 802 | |
| 803 | pinctrl_i2c5: dhcom-i2c5-grp { |
| 804 | fsl,pins = < |
| 805 | MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x40000084 |
| 806 | MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x40000084 |
| 807 | >; |
| 808 | }; |
| 809 | |
| 810 | pinctrl_i2c5_gpio: dhcom-i2c5-gpio-grp { |
| 811 | fsl,pins = < |
| 812 | MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84 |
| 813 | MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84 |
| 814 | >; |
| 815 | }; |
| 816 | |
| 817 | pinctrl_pmic: dhcom-pmic-grp { |
| 818 | fsl,pins = < |
| 819 | /* PMIC_nINT */ |
| 820 | MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090 |
| 821 | >; |
| 822 | }; |
| 823 | |
| 824 | pinctrl_pwm1: dhcom-pwm1-grp { |
| 825 | fsl,pins = < |
| 826 | MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x6 |
| 827 | >; |
| 828 | }; |
| 829 | |
| 830 | pinctrl_rtc: dhcom-rtc-grp { |
| 831 | fsl,pins = < |
| 832 | /* RTC_#INT Interrupt */ |
| 833 | MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x400001c6 |
| 834 | >; |
| 835 | }; |
| 836 | |
| 837 | pinctrl_touch: dhcom-touch-grp { |
| 838 | fsl,pins = < |
| 839 | /* #TOUCH_INT */ |
| 840 | MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x40000080 |
| 841 | >; |
| 842 | }; |
| 843 | |
| 844 | pinctrl_uart1: dhcom-uart1-grp { |
| 845 | fsl,pins = < |
| 846 | /* Console UART */ |
| 847 | MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x49 |
| 848 | MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x49 |
| 849 | MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49 |
| 850 | MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x49 |
| 851 | >; |
| 852 | }; |
| 853 | |
| 854 | pinctrl_uart2: dhcom-uart2-grp { |
| 855 | fsl,pins = < |
| 856 | /* Bluetooth UART */ |
| 857 | MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 |
| 858 | MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 |
| 859 | MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49 |
| 860 | MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49 |
| 861 | >; |
| 862 | }; |
| 863 | |
| 864 | pinctrl_uart3: dhcom-uart3-grp { |
| 865 | fsl,pins = < |
| 866 | MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x49 |
| 867 | MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x49 |
| 868 | MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x49 |
| 869 | MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x49 |
| 870 | >; |
| 871 | }; |
| 872 | |
| 873 | pinctrl_uart4: dhcom-uart4-grp { |
| 874 | fsl,pins = < |
| 875 | MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 |
| 876 | MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 |
| 877 | >; |
| 878 | }; |
| 879 | |
| 880 | pinctrl_usb0_vbus: dhcom-usb0-grp { |
| 881 | fsl,pins = < |
| 882 | MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0 |
| 883 | >; |
| 884 | }; |
| 885 | |
| 886 | pinctrl_usb1_vbus: dhcom-usb1-grp { |
| 887 | fsl,pins = < |
| 888 | MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x6 |
| 889 | MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x80 |
| 890 | >; |
| 891 | }; |
| 892 | |
| 893 | pinctrl_usdhc1: dhcom-usdhc1-grp { |
| 894 | fsl,pins = < |
| 895 | MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 |
| 896 | MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 |
| 897 | MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 |
| 898 | MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 |
| 899 | MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 |
| 900 | MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 |
| 901 | /* BT_REG_EN */ |
| 902 | MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 |
| 903 | /* WL_REG_EN */ |
| 904 | MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 |
| 905 | >; |
| 906 | }; |
| 907 | |
| 908 | pinctrl_usdhc1_100mhz: dhcom-usdhc1-100mhz-grp { |
| 909 | fsl,pins = < |
| 910 | MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194 |
| 911 | MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4 |
| 912 | MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4 |
| 913 | MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4 |
| 914 | MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4 |
| 915 | MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4 |
| 916 | /* BT_REG_EN */ |
| 917 | MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 |
| 918 | /* WL_REG_EN */ |
| 919 | MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 |
| 920 | >; |
| 921 | }; |
| 922 | |
| 923 | pinctrl_usdhc1_200mhz: dhcom-usdhc1-200mhz-grp { |
| 924 | fsl,pins = < |
| 925 | MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196 |
| 926 | MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6 |
| 927 | MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6 |
| 928 | MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6 |
| 929 | MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6 |
| 930 | MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6 |
| 931 | /* BT_REG_EN */ |
| 932 | MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 |
| 933 | /* WL_REG_EN */ |
| 934 | MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 |
| 935 | >; |
| 936 | }; |
| 937 | |
| 938 | pinctrl_usdhc2: dhcom-usdhc2-grp { |
| 939 | fsl,pins = < |
| 940 | MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 |
| 941 | MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 |
| 942 | MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 |
| 943 | MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 |
| 944 | MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 |
| 945 | MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 |
| 946 | MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 |
| 947 | >; |
| 948 | }; |
| 949 | |
| 950 | pinctrl_usdhc2_100mhz: dhcom-usdhc2-100mhz-grp { |
| 951 | fsl,pins = < |
| 952 | MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 |
| 953 | MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 |
| 954 | MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 |
| 955 | MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 |
| 956 | MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 |
| 957 | MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 |
| 958 | MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 |
| 959 | >; |
| 960 | }; |
| 961 | |
| 962 | pinctrl_usdhc2_200mhz: dhcom-usdhc2-200mhz-grp { |
| 963 | fsl,pins = < |
| 964 | MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 |
| 965 | MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 |
| 966 | MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 |
| 967 | MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 |
| 968 | MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 |
| 969 | MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 |
| 970 | MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 |
| 971 | >; |
| 972 | }; |
| 973 | |
| 974 | pinctrl_usdhc2_vmmc: dhcom-usdhc2-vmmc-grp { |
| 975 | fsl,pins = < |
| 976 | MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20 |
| 977 | >; |
| 978 | }; |
| 979 | |
| 980 | pinctrl_usdhc2_gpio: dhcom-usdhc2-gpio-grp { |
| 981 | fsl,pins = < |
| 982 | MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080 |
| 983 | >; |
| 984 | }; |
| 985 | |
| 986 | pinctrl_usdhc3: dhcom-usdhc3-grp { |
| 987 | fsl,pins = < |
| 988 | MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 |
| 989 | MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 |
| 990 | MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 |
| 991 | MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 |
| 992 | MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 |
| 993 | MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 |
| 994 | MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 |
| 995 | MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 |
| 996 | MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 |
| 997 | MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 |
| 998 | MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 |
| 999 | MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 |
| 1000 | >; |
| 1001 | }; |
| 1002 | |
| 1003 | pinctrl_usdhc3_100mhz: dhcom-usdhc3-100mhz-grp { |
| 1004 | fsl,pins = < |
| 1005 | MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 |
| 1006 | MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 |
| 1007 | MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 |
| 1008 | MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 |
| 1009 | MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 |
| 1010 | MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 |
| 1011 | MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 |
| 1012 | MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 |
| 1013 | MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 |
| 1014 | MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 |
| 1015 | MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 |
| 1016 | MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 |
| 1017 | >; |
| 1018 | }; |
| 1019 | |
| 1020 | pinctrl_usdhc3_200mhz: dhcom-usdhc3-200mhz-grp { |
| 1021 | fsl,pins = < |
| 1022 | MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 |
| 1023 | MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 |
| 1024 | MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 |
| 1025 | MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 |
| 1026 | MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 |
| 1027 | MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 |
| 1028 | MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 |
| 1029 | MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 |
| 1030 | MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 |
| 1031 | MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 |
| 1032 | MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 |
| 1033 | MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 |
| 1034 | >; |
| 1035 | }; |
| 1036 | |
| 1037 | pinctrl_wdog: dhcom-wdog-grp { |
| 1038 | fsl,pins = < |
| 1039 | MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 |
| 1040 | >; |
| 1041 | }; |
| 1042 | }; |