Soeren Moch | 86ef90b | 2019-03-01 13:10:54 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ OR MIT |
| 2 | // |
| 3 | // Copyright 2014-2019 Soeren Moch <smoch@web.de> |
| 4 | |
| 5 | /dts-v1/; |
| 6 | |
| 7 | #include "imx6q.dtsi" |
| 8 | #include <dt-bindings/gpio/gpio.h> |
| 9 | #include <dt-bindings/input/input.h> |
| 10 | |
| 11 | / { |
| 12 | model = "TBS2910 Matrix ARM mini PC"; |
| 13 | compatible = "tbs,imx6q-tbs2910", "fsl,imx6q"; |
| 14 | |
| 15 | chosen { |
| 16 | stdout-path = &uart1; |
| 17 | }; |
| 18 | |
| 19 | aliases { |
| 20 | mmc0 = &usdhc2; |
| 21 | mmc1 = &usdhc3; |
| 22 | mmc2 = &usdhc4; |
| 23 | usb0 = &usbotg; |
| 24 | }; |
| 25 | |
| 26 | memory@10000000 { |
| 27 | reg = <0x10000000 0x80000000>; |
| 28 | }; |
| 29 | |
| 30 | fan { |
| 31 | compatible = "gpio-fan"; |
| 32 | pinctrl-names = "default"; |
| 33 | pinctrl-0 = <&pinctrl_gpio_fan>; |
| 34 | gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; |
| 35 | gpio-fan,speed-map = <0 0 |
| 36 | 3000 1>; |
| 37 | }; |
| 38 | |
| 39 | ir_recv { |
| 40 | compatible = "gpio-ir-receiver"; |
| 41 | gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; |
| 42 | pinctrl-names = "default"; |
| 43 | pinctrl-0 = <&pinctrl_ir>; |
| 44 | }; |
| 45 | |
| 46 | leds { |
| 47 | compatible = "gpio-leds"; |
| 48 | pinctrl-names = "default"; |
| 49 | pinctrl-0 = <&pinctrl_gpio_leds>; |
| 50 | |
| 51 | blue { |
| 52 | label = "blue_status_led"; |
| 53 | gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| 54 | default-state = "keep"; |
| 55 | }; |
| 56 | }; |
| 57 | |
| 58 | reg_2p5v: regulator-2p5v { |
| 59 | compatible = "regulator-fixed"; |
| 60 | regulator-name = "2P5V"; |
| 61 | regulator-min-microvolt = <2500000>; |
| 62 | regulator-max-microvolt = <2500000>; |
| 63 | }; |
| 64 | |
| 65 | reg_3p3v: regulator-3p3v { |
| 66 | compatible = "regulator-fixed"; |
| 67 | regulator-name = "3P3V"; |
| 68 | regulator-min-microvolt = <3300000>; |
| 69 | regulator-max-microvolt = <3300000>; |
| 70 | }; |
| 71 | |
| 72 | reg_5p0v: regulator-5p0v { |
| 73 | compatible = "regulator-fixed"; |
| 74 | regulator-name = "5P0V"; |
| 75 | regulator-min-microvolt = <5000000>; |
| 76 | regulator-max-microvolt = <5000000>; |
| 77 | }; |
| 78 | |
| 79 | sound-sgtl5000 { |
| 80 | audio-codec = <&sgtl5000>; |
| 81 | audio-routing = |
| 82 | "MIC_IN", "Mic Jack", |
| 83 | "Mic Jack", "Mic Bias", |
| 84 | "Headphone Jack", "HP_OUT"; |
| 85 | compatible = "fsl,imx-audio-sgtl5000"; |
| 86 | model = "On-board Codec"; |
| 87 | mux-ext-port = <3>; |
| 88 | mux-int-port = <1>; |
| 89 | ssi-controller = <&ssi1>; |
| 90 | }; |
| 91 | |
| 92 | sound-spdif { |
| 93 | compatible = "fsl,imx-audio-spdif"; |
| 94 | model = "On-board SPDIF"; |
| 95 | spdif-controller = <&spdif>; |
| 96 | spdif-out; |
| 97 | }; |
| 98 | }; |
| 99 | |
| 100 | &audmux { |
| 101 | status = "okay"; |
| 102 | }; |
| 103 | |
| 104 | &fec { |
| 105 | pinctrl-names = "default"; |
| 106 | pinctrl-0 = <&pinctrl_enet>; |
| 107 | phy-mode = "rgmii"; |
| 108 | phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| 109 | status = "okay"; |
| 110 | }; |
| 111 | |
| 112 | &hdmi { |
| 113 | pinctrl-names = "default"; |
| 114 | pinctrl-0 = <&pinctrl_hdmi>; |
| 115 | ddc-i2c-bus = <&i2c2>; |
| 116 | status = "okay"; |
| 117 | }; |
| 118 | |
| 119 | &i2c1 { |
| 120 | clock-frequency = <100000>; |
| 121 | pinctrl-names = "default"; |
| 122 | pinctrl-0 = <&pinctrl_i2c1>; |
| 123 | status = "okay"; |
| 124 | |
| 125 | sgtl5000: sgtl5000@a { |
| 126 | clocks = <&clks IMX6QDL_CLK_CKO>; |
| 127 | compatible = "fsl,sgtl5000"; |
| 128 | pinctrl-names = "default"; |
| 129 | pinctrl-0 = <&pinctrl_sgtl5000>; |
| 130 | reg = <0x0a>; |
| 131 | VDDA-supply = <®_2p5v>; |
| 132 | VDDIO-supply = <®_3p3v>; |
| 133 | }; |
| 134 | }; |
| 135 | |
| 136 | &i2c2 { |
| 137 | clock-frequency = <100000>; |
| 138 | pinctrl-names = "default"; |
| 139 | pinctrl-0 = <&pinctrl_i2c2>; |
| 140 | status = "okay"; |
| 141 | }; |
| 142 | |
| 143 | &i2c3 { |
| 144 | clock-frequency = <100000>; |
| 145 | pinctrl-names = "default"; |
| 146 | pinctrl-0 = <&pinctrl_i2c3>; |
| 147 | status = "okay"; |
| 148 | |
| 149 | rtc: ds1307@68 { |
| 150 | compatible = "dallas,ds1307"; |
| 151 | reg = <0x68>; |
| 152 | }; |
| 153 | }; |
| 154 | |
| 155 | &pcie { |
| 156 | pinctrl-names = "default"; |
| 157 | pinctrl-0 = <&pinctrl_pcie>; |
| 158 | reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; |
| 159 | status = "okay"; |
| 160 | }; |
| 161 | |
| 162 | &sata { |
| 163 | fsl,transmit-level-mV = <1104>; |
| 164 | fsl,transmit-boost-mdB = <3330>; |
| 165 | fsl,transmit-atten-16ths = <16>; |
| 166 | fsl,receive-eq-mdB = <3000>; |
| 167 | status = "okay"; |
| 168 | }; |
| 169 | |
| 170 | &snvs_poweroff { |
| 171 | status = "okay"; |
| 172 | }; |
| 173 | |
| 174 | &spdif { |
| 175 | pinctrl-names = "default"; |
| 176 | pinctrl-0 = <&pinctrl_spdif>; |
| 177 | status = "okay"; |
| 178 | }; |
| 179 | |
| 180 | &ssi1 { |
| 181 | status = "okay"; |
| 182 | }; |
| 183 | |
| 184 | &uart1 { |
| 185 | pinctrl-names = "default"; |
| 186 | pinctrl-0 = <&pinctrl_uart1>; |
| 187 | status = "okay"; |
| 188 | }; |
| 189 | |
| 190 | &uart2 { |
| 191 | pinctrl-names = "default"; |
| 192 | pinctrl-0 = <&pinctrl_uart2>; |
| 193 | status = "okay"; |
| 194 | }; |
| 195 | |
| 196 | &usbh1 { |
| 197 | vbus-supply = <®_5p0v>; |
| 198 | status = "okay"; |
| 199 | }; |
| 200 | |
| 201 | &usbotg { |
| 202 | vbus-supply = <®_5p0v>; |
| 203 | pinctrl-names = "default"; |
| 204 | pinctrl-0 = <&pinctrl_usbotg>; |
| 205 | disable-over-current; |
| 206 | status = "okay"; |
| 207 | }; |
| 208 | |
| 209 | &usdhc2 { |
| 210 | pinctrl-names = "default"; |
| 211 | pinctrl-0 = <&pinctrl_usdhc2>; |
| 212 | bus-width = <4>; |
| 213 | cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; |
| 214 | vmmc-supply = <®_3p3v>; |
| 215 | vqmmc-supply = <®_3p3v>; |
| 216 | voltage-ranges = <3300 3300>; |
| 217 | no-1-8-v; |
| 218 | status = "okay"; |
| 219 | }; |
| 220 | |
| 221 | &usdhc3 { |
| 222 | pinctrl-names = "default"; |
| 223 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 224 | bus-width = <4>; |
| 225 | cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; |
| 226 | wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; |
| 227 | vmmc-supply = <®_3p3v>; |
| 228 | vqmmc-supply = <®_3p3v>; |
| 229 | voltage-ranges = <3300 3300>; |
| 230 | no-1-8-v; |
| 231 | status = "okay"; |
| 232 | }; |
| 233 | |
| 234 | &usdhc4 { |
| 235 | pinctrl-names = "default"; |
| 236 | pinctrl-0 = <&pinctrl_usdhc4>; |
| 237 | bus-width = <8>; |
| 238 | vmmc-supply = <®_3p3v>; |
| 239 | vqmmc-supply = <®_3p3v>; |
| 240 | voltage-ranges = <3300 3300>; |
| 241 | non-removable; |
| 242 | no-1-8-v; |
| 243 | status = "okay"; |
| 244 | }; |
| 245 | |
| 246 | &iomuxc { |
| 247 | pinctrl_enet: enetgrp { |
| 248 | fsl,pins = < |
| 249 | MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| 250 | MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| 251 | MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 |
| 252 | MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 |
| 253 | MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 |
| 254 | MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 |
| 255 | MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 |
| 256 | MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 |
| 257 | MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
| 258 | MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| 259 | MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| 260 | MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| 261 | MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| 262 | MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| 263 | MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| 264 | MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 |
| 265 | MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b059 |
| 266 | >; |
| 267 | }; |
| 268 | |
| 269 | pinctrl_gpio_fan: gpiofangrp { |
| 270 | fsl,pins = < |
| 271 | MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1 |
| 272 | >; |
| 273 | }; |
| 274 | |
| 275 | pinctrl_gpio_leds: gpioledsgrp { |
| 276 | fsl,pins = < |
| 277 | MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1 |
| 278 | >; |
| 279 | }; |
| 280 | |
| 281 | pinctrl_hdmi: hdmigrp { |
| 282 | fsl,pins = < |
| 283 | MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 |
| 284 | >; |
| 285 | }; |
| 286 | |
| 287 | pinctrl_i2c1: i2c1grp { |
| 288 | fsl,pins = < |
| 289 | MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| 290 | MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| 291 | >; |
| 292 | }; |
| 293 | |
| 294 | pinctrl_i2c2: i2c2grp { |
| 295 | fsl,pins = < |
| 296 | MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| 297 | MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| 298 | >; |
| 299 | }; |
| 300 | |
| 301 | pinctrl_i2c3: i2c3grp { |
| 302 | fsl,pins = < |
| 303 | MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| 304 | MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| 305 | >; |
| 306 | }; |
| 307 | |
| 308 | pinctrl_ir: irgrp { |
| 309 | fsl,pins = < |
| 310 | MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x17059 |
| 311 | >; |
| 312 | }; |
| 313 | |
| 314 | pinctrl_pcie: pciegrp { |
| 315 | fsl,pins = < |
| 316 | MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x17059 |
| 317 | >; |
| 318 | }; |
| 319 | |
| 320 | pinctrl_sgtl5000: sgtl5000grp { |
| 321 | fsl,pins = < |
| 322 | MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 |
| 323 | MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 |
| 324 | MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 |
| 325 | MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 |
| 326 | MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 |
| 327 | >; |
| 328 | }; |
| 329 | |
| 330 | pinctrl_spdif: spdifgrp { |
| 331 | fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 |
| 332 | >; |
| 333 | }; |
| 334 | |
| 335 | pinctrl_uart1: uart1grp { |
| 336 | fsl,pins = < |
| 337 | MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| 338 | MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| 339 | >; |
| 340 | }; |
| 341 | |
| 342 | pinctrl_uart2: uart2grp { |
| 343 | fsl,pins = < |
| 344 | MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 |
| 345 | MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 |
| 346 | >; |
| 347 | }; |
| 348 | |
| 349 | pinctrl_usbotg: usbotggrp { |
| 350 | fsl,pins = < |
| 351 | MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| 352 | >; |
| 353 | }; |
| 354 | |
| 355 | pinctrl_usdhc2: usdhc2grp { |
| 356 | fsl,pins = < |
| 357 | MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| 358 | MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| 359 | MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| 360 | MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| 361 | MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| 362 | MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| 363 | MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x17059 |
| 364 | >; |
| 365 | }; |
| 366 | |
| 367 | pinctrl_usdhc3: usdhc3grp { |
| 368 | fsl,pins = < |
| 369 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| 370 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| 371 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| 372 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| 373 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| 374 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| 375 | MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x17059 |
| 376 | MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x17059 |
| 377 | >; |
| 378 | }; |
| 379 | |
| 380 | pinctrl_usdhc4: usdhc4grp { |
| 381 | fsl,pins = < |
| 382 | MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 |
| 383 | MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 |
| 384 | MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 |
| 385 | MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 |
| 386 | MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 |
| 387 | MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 |
| 388 | MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 |
| 389 | MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 |
| 390 | MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 |
| 391 | MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 |
| 392 | >; |
| 393 | }; |
| 394 | }; |