Svyatoslav Ryhel | bd932b7 | 2023-04-25 10:51:47 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright (c) 2022 Svyatoslav Ryhel <clamor95@gmail.com> |
| 4 | */ |
| 5 | |
| 6 | #include <common.h> |
| 7 | #include <backlight.h> |
| 8 | #include <dm.h> |
| 9 | #include <panel.h> |
| 10 | #include <log.h> |
| 11 | #include <misc.h> |
| 12 | #include <mipi_display.h> |
| 13 | #include <mipi_dsi.h> |
| 14 | #include <asm/gpio.h> |
| 15 | #include <linux/delay.h> |
| 16 | #include <linux/err.h> |
| 17 | #include <power/regulator.h> |
| 18 | |
| 19 | struct endeavoru_panel_priv { |
| 20 | struct udevice *vdd; |
| 21 | struct udevice *vddio; |
| 22 | |
| 23 | struct udevice *backlight; |
| 24 | |
| 25 | struct gpio_desc reset_gpio; |
| 26 | }; |
| 27 | |
| 28 | static struct display_timing default_timing = { |
| 29 | .pixelclock.typ = 63200000, |
| 30 | .hactive.typ = 720, |
| 31 | .hfront_porch.typ = 55, |
| 32 | .hback_porch.typ = 29, |
| 33 | .hsync_len.typ = 16, |
| 34 | .vactive.typ = 1280, |
| 35 | .vfront_porch.typ = 2, |
| 36 | .vback_porch.typ = 1, |
| 37 | .vsync_len.typ = 1, |
| 38 | }; |
| 39 | |
| 40 | static void dcs_write_one(struct mipi_dsi_device *dsi, u8 cmd, u8 data) |
| 41 | { |
| 42 | mipi_dsi_dcs_write(dsi, cmd, &data, 1); |
| 43 | } |
| 44 | |
| 45 | /* |
| 46 | * This panel is not able to auto-increment all cmd addresses so for some of |
| 47 | * them, we need to send them one by one... |
| 48 | */ |
| 49 | #define dcs_write_seq(dsi, cmd, seq...) \ |
| 50 | ({ \ |
| 51 | static const u8 d[] = { seq }; \ |
| 52 | unsigned int i; \ |
| 53 | \ |
| 54 | for (i = 0; i < ARRAY_SIZE(d) ; i++) \ |
| 55 | dcs_write_one(dsi, cmd + i, d[i]); \ |
| 56 | }) |
| 57 | |
| 58 | static int endeavoru_panel_enable_backlight(struct udevice *dev) |
| 59 | { |
| 60 | struct endeavoru_panel_priv *priv = dev_get_priv(dev); |
| 61 | int ret; |
| 62 | |
| 63 | ret = dm_gpio_set_value(&priv->reset_gpio, 1); |
| 64 | if (ret) { |
| 65 | log_err("error changing reset-gpios (%d)\n", ret); |
| 66 | return ret; |
| 67 | } |
| 68 | mdelay(5); |
| 69 | |
| 70 | ret = regulator_set_enable_if_allowed(priv->vddio, 1); |
| 71 | if (ret) { |
| 72 | log_err("error enabling iovcc-supply (%d)\n", ret); |
| 73 | return ret; |
| 74 | } |
| 75 | mdelay(1); |
| 76 | |
| 77 | ret = regulator_set_enable_if_allowed(priv->vdd, 1); |
| 78 | if (ret) { |
| 79 | log_err("error enabling vcc-supply (%d)\n", ret); |
| 80 | return ret; |
| 81 | } |
| 82 | mdelay(20); |
| 83 | |
| 84 | ret = dm_gpio_set_value(&priv->reset_gpio, 0); |
| 85 | if (ret) { |
| 86 | log_err("error changing reset-gpios (%d)\n", ret); |
| 87 | return ret; |
| 88 | } |
| 89 | mdelay(2); |
| 90 | |
| 91 | /* Reset panel */ |
| 92 | ret = dm_gpio_set_value(&priv->reset_gpio, 1); |
| 93 | if (ret) { |
| 94 | log_err("error changing reset-gpios (%d)\n", ret); |
| 95 | return ret; |
| 96 | } |
| 97 | mdelay(1); |
| 98 | |
| 99 | ret = dm_gpio_set_value(&priv->reset_gpio, 0); |
| 100 | if (ret) { |
| 101 | log_err("error changing reset-gpios (%d)\n", ret); |
| 102 | return ret; |
| 103 | } |
| 104 | mdelay(25); |
| 105 | |
| 106 | return 0; |
| 107 | } |
| 108 | |
| 109 | static int endeavoru_panel_set_backlight(struct udevice *dev, int percent) |
| 110 | { |
| 111 | struct endeavoru_panel_priv *priv = dev_get_priv(dev); |
| 112 | struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); |
| 113 | struct mipi_dsi_device *dsi = plat->device; |
| 114 | int ret; |
| 115 | |
| 116 | dcs_write_one(dsi, 0xc2, 0x08); |
| 117 | |
| 118 | /* color enhancement 2.2 */ |
| 119 | dcs_write_one(dsi, 0xff, 0x03); |
| 120 | dcs_write_one(dsi, 0xfe, 0x08); |
| 121 | dcs_write_one(dsi, 0x18, 0x00); |
| 122 | dcs_write_one(dsi, 0x19, 0x00); |
| 123 | dcs_write_one(dsi, 0x1a, 0x00); |
| 124 | dcs_write_one(dsi, 0x25, 0x26); |
| 125 | |
| 126 | dcs_write_seq(dsi, 0x00, 0x00, 0x05, 0x10, 0x17, |
| 127 | 0x22, 0x26, 0x29, 0x29, 0x26, 0x23, |
| 128 | 0x17, 0x12, 0x06, 0x02, 0x01, 0x00); |
| 129 | |
| 130 | dcs_write_one(dsi, 0xfb, 0x01); |
| 131 | dcs_write_one(dsi, 0xff, 0x00); |
| 132 | dcs_write_one(dsi, 0xfe, 0x01); |
| 133 | |
| 134 | mipi_dsi_dcs_exit_sleep_mode(dsi); |
| 135 | |
| 136 | mdelay(105); |
| 137 | |
| 138 | dcs_write_one(dsi, 0x35, 0x00); |
| 139 | |
| 140 | /* PWM frequency adjust */ |
| 141 | dcs_write_one(dsi, 0xff, 0x04); |
| 142 | dcs_write_one(dsi, 0x0a, 0x07); |
| 143 | dcs_write_one(dsi, 0x09, 0x20); |
| 144 | dcs_write_one(dsi, 0xff, 0x00); |
| 145 | |
| 146 | dcs_write_one(dsi, 0xff, 0xee); |
| 147 | dcs_write_one(dsi, 0x12, 0x50); |
| 148 | dcs_write_one(dsi, 0x13, 0x02); |
| 149 | dcs_write_one(dsi, 0x6a, 0x60); |
| 150 | dcs_write_one(dsi, 0xfb, 0x01); |
| 151 | dcs_write_one(dsi, 0xff, 0x00); |
| 152 | |
| 153 | mipi_dsi_dcs_set_display_on(dsi); |
| 154 | |
| 155 | mdelay(42); |
| 156 | |
| 157 | dcs_write_one(dsi, 0xba, 0x01); |
| 158 | |
| 159 | dcs_write_one(dsi, 0x53, 0x24); |
| 160 | dcs_write_one(dsi, 0x55, 0x80); |
| 161 | dcs_write_one(dsi, 0x5e, 0x06); |
| 162 | |
| 163 | ret = backlight_enable(priv->backlight); |
| 164 | if (ret) |
| 165 | return ret; |
| 166 | |
| 167 | /* Set backlight */ |
| 168 | dcs_write_one(dsi, 0x51, 0x96); |
| 169 | |
| 170 | ret = backlight_set_brightness(priv->backlight, percent); |
| 171 | if (ret) |
| 172 | return ret; |
| 173 | |
| 174 | return 0; |
| 175 | } |
| 176 | |
| 177 | static int endeavoru_panel_timings(struct udevice *dev, |
| 178 | struct display_timing *timing) |
| 179 | { |
| 180 | memcpy(timing, &default_timing, sizeof(*timing)); |
| 181 | return 0; |
| 182 | } |
| 183 | |
| 184 | static int endeavoru_panel_of_to_plat(struct udevice *dev) |
| 185 | { |
| 186 | struct endeavoru_panel_priv *priv = dev_get_priv(dev); |
| 187 | int ret; |
| 188 | |
| 189 | ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev, |
| 190 | "backlight", &priv->backlight); |
| 191 | if (ret) { |
| 192 | log_err("cannot get backlight: ret = %d\n", ret); |
| 193 | return ret; |
| 194 | } |
| 195 | |
| 196 | ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev, |
| 197 | "vdd-supply", &priv->vdd); |
| 198 | if (ret) { |
| 199 | log_err("cannot get vdd-supply: ret = %d\n", ret); |
| 200 | return ret; |
| 201 | } |
| 202 | |
| 203 | ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev, |
| 204 | "vddio-supply", &priv->vddio); |
| 205 | if (ret) { |
| 206 | log_err("cannot get vddio-supply: ret = %d\n", ret); |
| 207 | return ret; |
| 208 | } |
| 209 | |
| 210 | ret = gpio_request_by_name(dev, "reset-gpios", 0, |
| 211 | &priv->reset_gpio, GPIOD_IS_OUT); |
| 212 | if (ret) { |
| 213 | log_err("could not decode reser-gpios (%d)\n", ret); |
| 214 | return ret; |
| 215 | } |
| 216 | |
| 217 | return 0; |
| 218 | } |
| 219 | |
| 220 | static int endeavoru_panel_probe(struct udevice *dev) |
| 221 | { |
| 222 | struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); |
| 223 | |
| 224 | /* fill characteristics of DSI data link */ |
| 225 | plat->lanes = 2; |
| 226 | plat->format = MIPI_DSI_FMT_RGB888; |
| 227 | plat->mode_flags = MIPI_DSI_MODE_VIDEO; |
| 228 | |
| 229 | return 0; |
| 230 | } |
| 231 | |
| 232 | static const struct panel_ops endeavoru_panel_ops = { |
| 233 | .enable_backlight = endeavoru_panel_enable_backlight, |
| 234 | .set_backlight = endeavoru_panel_set_backlight, |
| 235 | .get_display_timing = endeavoru_panel_timings, |
| 236 | }; |
| 237 | |
| 238 | static const struct udevice_id endeavoru_panel_ids[] = { |
| 239 | { .compatible = "htc,edge-panel" }, |
| 240 | { } |
| 241 | }; |
| 242 | |
| 243 | U_BOOT_DRIVER(endeavoru_panel) = { |
| 244 | .name = "endeavoru_panel", |
| 245 | .id = UCLASS_PANEL, |
| 246 | .of_match = endeavoru_panel_ids, |
| 247 | .ops = &endeavoru_panel_ops, |
| 248 | .of_to_plat = endeavoru_panel_of_to_plat, |
| 249 | .probe = endeavoru_panel_probe, |
| 250 | .plat_auto = sizeof(struct mipi_dsi_panel_plat), |
| 251 | .priv_auto = sizeof(struct endeavoru_panel_priv), |
| 252 | }; |