include/configs/CRAYL1.h

/*
 * (C) Copyright 2000, 2001
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 * David Updegraff, Cray, Inc.  dave@cray.com: our 405 is walnut-lite..
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_CRAYL1
/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_405GP		1	/* This is a PPC405 CPU	*/
#define CONFIG_4xx		    1   /* ...member of PPC405 family */
#define CONFIG_SYS_CLK_FREQ 25000000
#define CONFIG_BAUDRATE		9600
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#define CONFIG_MII		    1	/* MII PHY management */
#define	CONFIG_PHY_ADDR		1	/* PHY address; handling of ENET */
#define CONFIG_BOARD_PRE_INIT 1 /* setup for 405gp */
#define CONFIG_MISC_INIT_R	1	/* so that a misc_init_r() is called */

/* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to
 * keep possible initrd ramdisk decompression out.  This is in k (1024 bytes)
 #define CONFIG_PRAM			16
 */
#define	CONFIG_LOADADDR		0x100000
#undef CONFIG_BOOTARGS

/* the logic is that booting is driven by what env vars get set from DHCP.
 * Normal DHCP sets things like serverip, rootpath, etc.
 * if printenv
 */
#define	CFG_AUTOLOAD		"yes"
#define CONFIG_BOOTCOMMAND	"dhcp;"\
	"setenv bootargs devfs=mount;"\
	"setenv bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:::off $bootargs;"\
	"if printenv initrd;"\
	"then;" \
	 "setenv initrd_hi $mem;"\
	 "tftp 1000000 $initrd;"\
	 "setenv bootargs root=/dev/ram0 rw cwsroot=$serverip:$rootpath $bootargs;"\
	 "bootm 100000 1000000;"\
	"else;"\
	 "setenv bootargs root=/dev/nfs ro nfsroot=$serverip:$rootpath $bootargs;"\
	 "bootm 100000;"\
	"fi;"

#define CONFIG_EXTRA_ENV_SETTINGS ""

/*
 * ..during experiments..
 #define CONFIG_SERVERIP         10.0.0.1
 #define CONFIG_ETHADDR          00:40:a6:80:14:5
 */
#define CONFIG_HARD_I2C         1		/* hardware support for i2c */
#define CFG_I2C_SPEED		    400000	/* I2C speed and slave address	*/
#define CFG_I2C_SLAVE		    0x7F
#define CFG_I2C_EEPROM_ADDR     0x57
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_IDENT_STRING     "Cray L1"
#define CONFIG_ENV_OVERWRITE     1
#define	CFG_HZ		             1000	/* decrementer freq: 1 ms ticks	*/
#define CFG_HUSH_PARSER			1
#define CFG_PROMPT_HUSH_PS2		"> "


#define CONFIG_COMMANDS	 (\
	CFG_CMD_BDI|\
	CFG_CMD_IMI|\
	CFG_CMD_FLASH|\
	CFG_CMD_MEMORY|\
	CFG_CMD_NET|\
	CFG_CMD_ENV|\
	CFG_CMD_CONSOLE|\
	CFG_CMD_ASKENV|\
	CFG_CMD_ECHO|\
	CFG_CMD_IMMAP|\
	CFG_CMD_REGINFO|\
	CFG_CMD_DHCP|\
	CFG_CMD_DATE|\
	CFG_CMD_RUN|\
	CFG_CMD_I2C|\
	CFG_CMD_EEPROM|\
	CFG_CMD_SETGETDCR)

/*
 * optional BOOTP / DHCP fields
 */
#define CONFIG_BOOTP_MASK (\
	CONFIG_BOOTP_VENDOREX|\
	CONFIG_BOOTP_SUBNETMASK|\
	CONFIG_BOOTP_GATEWAY|\
	CONFIG_BOOTP_DNS|\
	CONFIG_BOOTP_HOSTNAME|\
	CONFIG_BOOTP_BOOTFILESIZE|\
	CONFIG_BOOTP_BOOTPATH)

/*
 * bauds.  Just to make it compile; in our case, I read the base_baud
 * from the DCR anyway, so its kinda-tied to the above ref. clock which in turn
 * drives the system clock.
 */
#define CFG_BASE_BAUD       403225
#define CFG_BAUDRATE_TABLE  \
    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>

/*
 * Miscellaneous configurable options
 */
#define CFG_PROMPT	"=> "			/* Monitor Command Prompt	*/
#define	CFG_CBSIZE	256				/* Console I/O Buffer Size	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS	16				/* max number of command args	*/


#define CFG_LOAD_ADDR   	0x100000/* where to load what we get from TFTP */
#define CFG_TFTP_LOADADDR	CFG_LOAD_ADDR
#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define CFG_SDRAM_BASE		0x00000000
#define CFG_FLASH_BASE		0xFFC00000
#define CFG_MONITOR_BASE	TEXT_BASE

#ifndef  CFG_HUSH_PARSER
#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128 kB for Monitor	*/
#define CFG_ENV_OFFSET		0x3D0000
#else
#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
#define CFG_ENV_OFFSET		0x3FE000
#endif

#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS	 1		/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	 64		/* max number of sectors on one chip	*/
#define CFG_FLASH_ERASE_TOUT 120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT 500	/* Timeout for Flash Write (in ms)	*/

/* BEG ENVIRONNEMENT FLASH: needs to be a whole FlashSector  */
#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
#define	CFG_ENV_SIZE		0x1000	 /* Total Size of Environment Sector	*/
#define CFG_ENV_SECT_SIZE	0x10000	 /* see README - env sector total size	*/

/* Memory tests: U-Boot relocates itself to the top of Ram, so its at
 * 32meg-(128k+some_malloc_space+copy-of-ENV sector)..
 */
#define CFG_SDRAM_SIZE		32		/* megs of ram */
#define CFG_MEMTEST_START	0x2000  /* memtest works from the end of */
									/* the exception vector table */
									/* to the end of the DRAM  */
									/* less monitor and malloc area */
#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
                                + CFG_MALLOC_LEN \
                                + CFG_ENV_SECT_SIZE \
                                + CFG_STACK_USAGE )

#define CFG_MEMTEST_END		(CFG_SDRAM_SIZE * 1024 * 1024 - CFG_MEM_END_USAGE)
/* END ENVIRONNEMENT FLASH */

/*-----------------------------------------------------------------------
 * Cache Configuration.  Only used to ..?? clear it, I guess..
 */
#define CFG_DCACHE_SIZE		16384
#define CFG_CACHELINE_SIZE	32

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/


/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in OnChipMem )
 */
#if 0
#define CFG_INIT_RAM_ADDR       0x40000000  /* use data cache               */
#define CFG_INIT_RAM_END        0x2000  /* End of used area in RAM             */
#else
#define CFG_TEMP_STACK_OCM	1
#define CFG_OCM_DATA_ADDR	0xF0000000
#define CFG_OCM_DATA_SIZE	0x1000
#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR 	/* inside of On Chip SRAM    */
#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE	/* End of On Chip SRAM	     */
#endif

#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Definitions for Serial Presence Detect EEPROM address
 */
#define EEPROM_WRITE_ADDRESS 0xA0
#define EEPROM_READ_ADDRESS  0xA1

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */