blob: 4fd9c23e4e9aadc7b16c68d94b6fc6d8080aeeb9 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +01002/*
3 * (C) Copyright 2015
Kamil Lulko75d48a62015-12-01 09:08:19 +01004 * Kamil Lulko, <kamil.lulko@gmail.com>
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +01005 */
6
7#ifndef __CONFIG_H
8#define __CONFIG_H
9
Antonio Borneo989e8b22015-07-19 22:19:46 +080010#define CONFIG_MISC_INIT_R
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010011
12#define CONFIG_SYS_FLASH_BASE 0x08000000
13
14#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010015
16#define CONFIG_SYS_ICACHE_OFF
17#define CONFIG_SYS_DCACHE_OFF
18
19/*
20 * Configuration of the external SDRAM memory
21 */
22#define CONFIG_NR_DRAM_BANKS 1
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010023#define CONFIG_SYS_RAM_CS 1
24#define CONFIG_SYS_RAM_FREQ_DIV 2
25#define CONFIG_SYS_RAM_BASE 0xD0000000
26#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
27#define CONFIG_SYS_LOAD_ADDR 0xD0400000
28#define CONFIG_LOADADDR 0xD0400000
29
30#define CONFIG_SYS_MAX_FLASH_SECT 12
31#define CONFIG_SYS_MAX_FLASH_BANKS 2
32
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010033#define CONFIG_ENV_OFFSET (256 << 10)
34#define CONFIG_ENV_SECT_SIZE (128 << 10)
35#define CONFIG_ENV_SIZE (8 << 10)
36
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010037#define CONFIG_RED_LED 110
38#define CONFIG_GREEN_LED 109
39
Vikas Manochae750d562016-03-09 15:18:13 -080040#define CONFIG_STM32_FLASH
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010041
Antonio Borneof4a1a862015-07-19 22:19:48 +080042#define CONFIG_SYS_CLK_FREQ 180000000 /* 180 MHz */
43
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010044#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
45
46#define CONFIG_CMDLINE_TAG
47#define CONFIG_SETUP_MEMORY_TAGS
48#define CONFIG_INITRD_TAG
49#define CONFIG_REVISION_TAG
50
51#define CONFIG_SYS_CBSIZE 1024
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010052
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010053#define CONFIG_SYS_MALLOC_LEN (2 << 20)
54
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010055#define CONFIG_BOOTCOMMAND \
56 "run bootcmd_romfs"
57
58#define CONFIG_EXTRA_ENV_SETTINGS \
59 "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
60 "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
61 "bootm 0x08044000 - 0x08042000\0"
62
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010063/*
64 * Command line configuration.
65 */
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010066
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010067#endif /* __CONFIG_H */