| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: BSD-3-Clause |
| 2 | /* |
| 3 | * IPQ5332 RDP board common device tree source |
| 4 | * |
| 5 | * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include <dt-bindings/gpio/gpio.h> |
| 11 | #include <dt-bindings/input/input.h> |
| 12 | #include "ipq5332.dtsi" |
| 13 | |
| 14 | / { |
| 15 | aliases { |
| 16 | serial0 = &blsp1_uart0; |
| 17 | }; |
| 18 | |
| 19 | chosen { |
| 20 | stdout-path = "serial0"; |
| 21 | }; |
| 22 | |
| 23 | gpio-keys { |
| 24 | compatible = "gpio-keys"; |
| 25 | pinctrl-0 = <&gpio_keys_default>; |
| 26 | pinctrl-names = "default"; |
| 27 | |
| 28 | button-wps { |
| 29 | label = "wps"; |
| 30 | linux,code = <KEY_WPS_BUTTON>; |
| 31 | gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; |
| 32 | debounce-interval = <60>; |
| 33 | }; |
| 34 | }; |
| 35 | |
| 36 | leds { |
| 37 | compatible = "gpio-leds"; |
| 38 | pinctrl-0 = <&gpio_leds_default>; |
| 39 | pinctrl-names = "default"; |
| 40 | |
| 41 | led-0 { |
| 42 | gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; |
| 43 | linux,default-trigger = "phy0tx"; |
| 44 | default-state = "off"; |
| 45 | }; |
| 46 | }; |
| 47 | }; |
| 48 | |
| 49 | &blsp1_uart0 { |
| 50 | pinctrl-0 = <&serial_0_pins>; |
| 51 | pinctrl-names = "default"; |
| 52 | status = "okay"; |
| 53 | }; |
| 54 | |
| 55 | &sleep_clk { |
| 56 | clock-frequency = <32000>; |
| 57 | }; |
| 58 | |
| 59 | &xo_board { |
| 60 | clock-frequency = <24000000>; |
| 61 | }; |
| 62 | |
| 63 | /* PINCTRL */ |
| 64 | &tlmm { |
| 65 | gpio_keys_default: gpio-keys-default-state { |
| 66 | pins = "gpio35"; |
| 67 | function = "gpio"; |
| 68 | drive-strength = <8>; |
| 69 | bias-pull-up; |
| 70 | }; |
| 71 | |
| 72 | gpio_leds_default: gpio-leds-default-state { |
| 73 | pins = "gpio36"; |
| 74 | function = "gpio"; |
| 75 | drive-strength = <8>; |
| 76 | bias-pull-down; |
| 77 | }; |
| 78 | }; |