blob: 877549124598ebcb5a8961cb86d9de1eb32519ea [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Sylvain Lemieux90a837f2015-08-10 08:16:31 -04002/*
3 * LPC32xx DMA Controller Interface
4 *
5 * Copyright (C) 2008 by NXP Semiconductors
6 * @Author: Kevin Wells
7 * @Descr: Definitions for LPC3250 chip
8 * @References: NXP LPC3250 User's Guide
Sylvain Lemieux90a837f2015-08-10 08:16:31 -04009 */
10
11#ifndef _LPC32XX_DMA_H
12#define _LPC32XX_DMA_H
13
14#include <common.h>
15
16/*
17 * DMA linked list structure used with a channel's LLI register;
18 * refer to UM10326, "LPC32x0 and LPC32x0/01 User manual" - Rev. 3
19 * tables 84, 85, 86 & 87 for details.
20 */
21struct lpc32xx_dmac_ll {
22 u32 dma_src;
23 u32 dma_dest;
24 u32 next_lli;
25 u32 next_ctrl;
26};
27
28/* control register definitions */
29#define DMAC_CHAN_INT_TC_EN (1 << 31) /* channel terminal count interrupt */
30#define DMAC_CHAN_DEST_AUTOINC (1 << 27) /* automatic destination increment */
31#define DMAC_CHAN_SRC_AUTOINC (1 << 26) /* automatic source increment */
32#define DMAC_CHAN_DEST_AHB1 (1 << 25) /* AHB1 master for dest. transfer */
33#define DMAC_CHAN_DEST_WIDTH_32 (1 << 22) /* Destination data width selection */
34#define DMAC_CHAN_SRC_WIDTH_32 (1 << 19) /* Source data width selection */
35#define DMAC_CHAN_DEST_BURST_1 0
36#define DMAC_CHAN_DEST_BURST_4 (1 << 15) /* Destination data burst size */
37#define DMAC_CHAN_SRC_BURST_1 0
38#define DMAC_CHAN_SRC_BURST_4 (1 << 12) /* Source data burst size */
39
40/*
41 * config_ch register definitions
42 * DMAC_CHAN_FLOW_D_xxx: flow control with DMA as the controller
43 * DMAC_DEST_PERIP: Macro for loading destination peripheral
44 * DMAC_SRC_PERIP: Macro for loading source peripheral
45 */
46#define DMAC_CHAN_FLOW_D_M2P (0x1 << 11)
47#define DMAC_CHAN_FLOW_D_P2M (0x2 << 11)
48#define DMAC_DEST_PERIP(n) (((n) & 0x1F) << 6)
49#define DMAC_SRC_PERIP(n) (((n) & 0x1F) << 1)
50
51/*
52 * config_ch register definitions
53 * (source and destination peripheral ID numbers).
54 * These can be used with the DMAC_DEST_PERIP and DMAC_SRC_PERIP macros.
55 */
56#define DMA_PERID_NAND1 1
57
58/* Channel enable bit */
59#define DMAC_CHAN_ENABLE (1 << 0)
60
61int lpc32xx_dma_get_channel(void);
62int lpc32xx_dma_start_xfer(unsigned int channel,
63 const struct lpc32xx_dmac_ll *desc, u32 config);
64int lpc32xx_dma_wait_status(unsigned int channel);
65
66#endif /* _LPC32XX_DMA_H */