blob: da0aa29865e921ca7b2240445b016dafcb3a635c [file] [log] [blame]
Anton Schubert98530e92015-08-11 11:54:01 +02001/*
2 * PCIe driver for Marvell MVEBU SoCs
3 *
4 * Based on Barebox drivers/pci/pci-mvebu.c
5 *
6 * Ported to U-Boot by:
7 * Anton Schubert <anton.schubert@gmx.de>
8 * Stefan Roese <sr@denx.de>
9 *
10 * SPDX-License-Identifier: GPL-2.0
11 */
12
13#include <common.h>
14#include <pci.h>
Masahiro Yamada56a931c2016-09-21 11:28:55 +090015#include <linux/errno.h>
Anton Schubert98530e92015-08-11 11:54:01 +020016#include <asm/io.h>
17#include <asm/arch/cpu.h>
18#include <asm/arch/soc.h>
19#include <linux/mbus.h>
20
21DECLARE_GLOBAL_DATA_PTR;
22
23/* PCIe unit register offsets */
24#define SELECT(x, n) ((x >> n) & 1UL)
25
26#define PCIE_DEV_ID_OFF 0x0000
27#define PCIE_CMD_OFF 0x0004
28#define PCIE_DEV_REV_OFF 0x0008
29#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
30#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
31#define PCIE_CAPAB_OFF 0x0060
32#define PCIE_CTRL_STAT_OFF 0x0068
33#define PCIE_HEADER_LOG_4_OFF 0x0128
34#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
35#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
36#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
37#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
38#define PCIE_WIN5_CTRL_OFF 0x1880
39#define PCIE_WIN5_BASE_OFF 0x1884
40#define PCIE_WIN5_REMAP_OFF 0x188c
41#define PCIE_CONF_ADDR_OFF 0x18f8
42#define PCIE_CONF_ADDR_EN BIT(31)
43#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
44#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
45#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
46#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
47#define PCIE_CONF_ADDR(dev, reg) \
48 (PCIE_CONF_BUS(PCI_BUS(dev)) | PCIE_CONF_DEV(PCI_DEV(dev)) | \
49 PCIE_CONF_FUNC(PCI_FUNC(dev)) | PCIE_CONF_REG(reg) | \
50 PCIE_CONF_ADDR_EN)
51#define PCIE_CONF_DATA_OFF 0x18fc
52#define PCIE_MASK_OFF 0x1910
53#define PCIE_MASK_ENABLE_INTS (0xf << 24)
54#define PCIE_CTRL_OFF 0x1a00
55#define PCIE_CTRL_X1_MODE BIT(0)
56#define PCIE_STAT_OFF 0x1a04
57#define PCIE_STAT_BUS (0xff << 8)
58#define PCIE_STAT_DEV (0x1f << 16)
59#define PCIE_STAT_LINK_DOWN BIT(0)
60#define PCIE_DEBUG_CTRL 0x1a60
61#define PCIE_DEBUG_SOFT_RESET BIT(20)
62
63struct resource {
64 u32 start;
65 u32 end;
66};
67
68struct mvebu_pcie {
69 struct pci_controller hose;
70 char *name;
71 void __iomem *base;
72 void __iomem *membase;
73 struct resource mem;
74 void __iomem *iobase;
75 u32 port;
76 u32 lane;
77 u32 lane_mask;
78 pci_dev_t dev;
79};
80
81#define to_pcie(_hc) container_of(_hc, struct mvebu_pcie, pci)
82
83/*
84 * MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped
85 * into SoCs address space. Each controller will map 32M of MEM
86 * and 64K of I/O space when registered.
87 */
88static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE;
89#define PCIE_MEM_SIZE (32 << 20)
90
91#if defined(CONFIG_ARMADA_38X)
92#define PCIE_BASE(if) \
93 ((if) == 0 ? \
Dirk Eibach18baf642017-01-11 16:00:45 +010094 MVEBU_REG_PCIE0_BASE : \
95 (MVEBU_REG_PCIE_BASE + 0x4000 * (if - 1)))
Anton Schubert98530e92015-08-11 11:54:01 +020096
97/*
98 * On A38x MV6820 these PEX ports are supported:
99 * 0 - Port 0.0
Dirk Eibach18baf642017-01-11 16:00:45 +0100100 * 1 - Port 1.0
101 * 2 - Port 2.0
102 * 3 - Port 3.0
Anton Schubert98530e92015-08-11 11:54:01 +0200103 */
Dirk Eibach18baf642017-01-11 16:00:45 +0100104#define MAX_PEX 4
Anton Schubert98530e92015-08-11 11:54:01 +0200105static struct mvebu_pcie pcie_bus[MAX_PEX];
106
107static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
108 int *mem_target, int *mem_attr)
109{
Dirk Eibach18baf642017-01-11 16:00:45 +0100110 u8 port[] = { 0, 1, 2, 3 };
111 u8 lane[] = { 0, 0, 0, 0 };
112 u8 target[] = { 8, 4, 4, 4 };
113 u8 attr[] = { 0xe8, 0xe8, 0xd8, 0xb8 };
Anton Schubert98530e92015-08-11 11:54:01 +0200114
115 pcie->port = port[pex_idx];
116 pcie->lane = lane[pex_idx];
117 *mem_target = target[pex_idx];
118 *mem_attr = attr[pex_idx];
119}
120#else
121#define PCIE_BASE(if) \
122 ((if) < 8 ? \
123 (MVEBU_REG_PCIE_BASE + ((if) / 4) * 0x40000 + ((if) % 4) * 0x4000) : \
124 (MVEBU_REG_PCIE_BASE + 0x2000 + ((if) % 8) * 0x40000))
125
126/*
127 * On AXP MV78460 these PEX ports are supported:
128 * 0 - Port 0.0
129 * 1 - Port 0.1
130 * 2 - Port 0.2
131 * 3 - Port 0.3
132 * 4 - Port 1.0
133 * 5 - Port 1.1
134 * 6 - Port 1.2
135 * 7 - Port 1.3
136 * 8 - Port 2.0
137 * 9 - Port 3.0
138 */
139#define MAX_PEX 10
140static struct mvebu_pcie pcie_bus[MAX_PEX];
141
142static void mvebu_get_port_lane(struct mvebu_pcie *pcie, int pex_idx,
143 int *mem_target, int *mem_attr)
144{
145 u8 port[] = { 0, 0, 0, 0, 1, 1, 1, 1, 2, 3 };
146 u8 lane[] = { 0, 1, 2, 3, 0, 1, 2, 3, 0, 0 };
147 u8 target[] = { 4, 4, 4, 4, 8, 8, 8, 8, 4, 8 };
148 u8 attr[] = { 0xe8, 0xd8, 0xb8, 0x78,
149 0xe8, 0xd8, 0xb8, 0x78,
150 0xf8, 0xf8 };
151
152 pcie->port = port[pex_idx];
153 pcie->lane = lane[pex_idx];
154 *mem_target = target[pex_idx];
155 *mem_attr = attr[pex_idx];
156}
157#endif
158
Phil Sutter68010aa2015-12-25 14:41:20 +0100159static int mvebu_pex_unit_is_x4(int pex_idx)
160{
161 int pex_unit = pex_idx < 9 ? pex_idx >> 2 : 3;
162 u32 mask = (0x0f << (pex_unit * 8));
163
164 return (readl(COMPHY_REFCLK_ALIGNMENT) & mask) == mask;
165}
166
Anton Schubert98530e92015-08-11 11:54:01 +0200167static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie)
168{
169 u32 val;
170 val = readl(pcie->base + PCIE_STAT_OFF);
171 return !(val & PCIE_STAT_LINK_DOWN);
172}
173
174static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie *pcie, int busno)
175{
176 u32 stat;
177
178 stat = readl(pcie->base + PCIE_STAT_OFF);
179 stat &= ~PCIE_STAT_BUS;
180 stat |= busno << 8;
181 writel(stat, pcie->base + PCIE_STAT_OFF);
182}
183
184static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie *pcie, int devno)
185{
186 u32 stat;
187
188 stat = readl(pcie->base + PCIE_STAT_OFF);
189 stat &= ~PCIE_STAT_DEV;
190 stat |= devno << 16;
191 writel(stat, pcie->base + PCIE_STAT_OFF);
192}
193
194static int mvebu_pcie_get_local_bus_nr(struct mvebu_pcie *pcie)
195{
196 u32 stat;
197
198 stat = readl(pcie->base + PCIE_STAT_OFF);
199 return (stat & PCIE_STAT_BUS) >> 8;
200}
201
202static int mvebu_pcie_get_local_dev_nr(struct mvebu_pcie *pcie)
203{
204 u32 stat;
205
206 stat = readl(pcie->base + PCIE_STAT_OFF);
207 return (stat & PCIE_STAT_DEV) >> 16;
208}
209
210static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose)
211{
212 return container_of(hose, struct mvebu_pcie, hose);
213}
214
215static int mvebu_pcie_read_config_dword(struct pci_controller *hose,
216 pci_dev_t dev, int offset, u32 *val)
217{
218 struct mvebu_pcie *pcie = hose_to_pcie(hose);
219 int local_bus = PCI_BUS(pcie->dev);
220 int local_dev = PCI_DEV(pcie->dev);
221 u32 reg;
222
223 /* Only allow one other device besides the local one on the local bus */
224 if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) {
225 if (local_dev == 0 && PCI_DEV(dev) != 1) {
226 /*
227 * If local dev is 0, the first other dev can
228 * only be 1
229 */
230 *val = 0xffffffff;
231 return 1;
232 } else if (local_dev != 0 && PCI_DEV(dev) != 0) {
233 /*
234 * If local dev is not 0, the first other dev can
235 * only be 0
236 */
237 *val = 0xffffffff;
238 return 1;
239 }
240 }
241
242 /* write address */
243 reg = PCIE_CONF_ADDR(dev, offset);
244 writel(reg, pcie->base + PCIE_CONF_ADDR_OFF);
245 *val = readl(pcie->base + PCIE_CONF_DATA_OFF);
246
247 return 0;
248}
249
250static int mvebu_pcie_write_config_dword(struct pci_controller *hose,
251 pci_dev_t dev, int offset, u32 val)
252{
253 struct mvebu_pcie *pcie = hose_to_pcie(hose);
254 int local_bus = PCI_BUS(pcie->dev);
255 int local_dev = PCI_DEV(pcie->dev);
256
257 /* Only allow one other device besides the local one on the local bus */
258 if (PCI_BUS(dev) == local_bus && PCI_DEV(dev) != local_dev) {
259 if (local_dev == 0 && PCI_DEV(dev) != 1) {
260 /*
261 * If local dev is 0, the first other dev can
262 * only be 1
263 */
264 return 1;
265 } else if (local_dev != 0 && PCI_DEV(dev) != 0) {
266 /*
267 * If local dev is not 0, the first other dev can
268 * only be 0
269 */
270 return 1;
271 }
272 }
273
274 writel(PCIE_CONF_ADDR(dev, offset), pcie->base + PCIE_CONF_ADDR_OFF);
275 writel(val, pcie->base + PCIE_CONF_DATA_OFF);
276
277 return 0;
278}
279
280/*
281 * Setup PCIE BARs and Address Decode Wins:
282 * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
283 * WIN[0-3] -> DRAM bank[0-3]
284 */
285static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie)
286{
287 const struct mbus_dram_target_info *dram = mvebu_mbus_dram_info();
288 u32 size;
289 int i;
290
291 /* First, disable and clear BARs and windows. */
292 for (i = 1; i < 3; i++) {
293 writel(0, pcie->base + PCIE_BAR_CTRL_OFF(i));
294 writel(0, pcie->base + PCIE_BAR_LO_OFF(i));
295 writel(0, pcie->base + PCIE_BAR_HI_OFF(i));
296 }
297
298 for (i = 0; i < 5; i++) {
299 writel(0, pcie->base + PCIE_WIN04_CTRL_OFF(i));
300 writel(0, pcie->base + PCIE_WIN04_BASE_OFF(i));
301 writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
302 }
303
304 writel(0, pcie->base + PCIE_WIN5_CTRL_OFF);
305 writel(0, pcie->base + PCIE_WIN5_BASE_OFF);
306 writel(0, pcie->base + PCIE_WIN5_REMAP_OFF);
307
308 /* Setup windows for DDR banks. Count total DDR size on the fly. */
309 size = 0;
310 for (i = 0; i < dram->num_cs; i++) {
311 const struct mbus_dram_window *cs = dram->cs + i;
312
313 writel(cs->base & 0xffff0000,
314 pcie->base + PCIE_WIN04_BASE_OFF(i));
315 writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
316 writel(((cs->size - 1) & 0xffff0000) |
317 (cs->mbus_attr << 8) |
318 (dram->mbus_dram_target_id << 4) | 1,
319 pcie->base + PCIE_WIN04_CTRL_OFF(i));
320
321 size += cs->size;
322 }
323
324 /* Round up 'size' to the nearest power of two. */
325 if ((size & (size - 1)) != 0)
326 size = 1 << fls(size);
327
328 /* Setup BAR[1] to all DRAM banks. */
329 writel(dram->cs[0].base | 0xc, pcie->base + PCIE_BAR_LO_OFF(1));
330 writel(0, pcie->base + PCIE_BAR_HI_OFF(1));
331 writel(((size - 1) & 0xffff0000) | 0x1,
332 pcie->base + PCIE_BAR_CTRL_OFF(1));
333}
334
335void pci_init_board(void)
336{
337 int mem_target, mem_attr, i;
338 int bus = 0;
339 u32 reg;
340 u32 soc_ctrl = readl(MVEBU_SYSTEM_REG_BASE + 0x4);
341
342 /* Check SoC Control Power State */
343 debug("%s: SoC Control %08x, 0en %01lx, 1en %01lx, 2en %01lx\n",
344 __func__, soc_ctrl, SELECT(soc_ctrl, 0), SELECT(soc_ctrl, 1),
345 SELECT(soc_ctrl, 2));
346
347 for (i = 0; i < MAX_PEX; i++) {
348 struct mvebu_pcie *pcie = &pcie_bus[i];
349 struct pci_controller *hose = &pcie->hose;
350
351 /* Get port number, lane number and memory target / attr */
352 mvebu_get_port_lane(pcie, i, &mem_target, &mem_attr);
353
354 /* Don't read at all from pci registers if port power is down */
Dirk Eibach18baf642017-01-11 16:00:45 +0100355 if (SELECT(soc_ctrl, pcie->port) == 0) {
356 if (pcie->lane == 0)
357 debug("%s: skipping port %d\n", __func__, pcie->port);
Anton Schubert98530e92015-08-11 11:54:01 +0200358 continue;
359 }
360
361 pcie->base = (void __iomem *)PCIE_BASE(i);
362
363 /* Check link and skip ports that have no link */
364 if (!mvebu_pcie_link_up(pcie)) {
365 debug("%s: PCIe %d.%d - down\n", __func__,
366 pcie->port, pcie->lane);
367 continue;
368 }
369 debug("%s: PCIe %d.%d - up, base %08x\n", __func__,
370 pcie->port, pcie->lane, (u32)pcie->base);
371
372 /* Read Id info and local bus/dev */
373 debug("direct conf read %08x, local bus %d, local dev %d\n",
374 readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie),
375 mvebu_pcie_get_local_dev_nr(pcie));
376
377 mvebu_pcie_set_local_bus_nr(pcie, bus);
378 mvebu_pcie_set_local_dev_nr(pcie, 0);
379 pcie->dev = PCI_BDF(bus, 0, 0);
380
381 pcie->mem.start = (u32)mvebu_pcie_membase;
382 pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1;
383 mvebu_pcie_membase += PCIE_MEM_SIZE;
384
385 if (mvebu_mbus_add_window_by_id(mem_target, mem_attr,
386 (phys_addr_t)pcie->mem.start,
387 PCIE_MEM_SIZE)) {
388 printf("PCIe unable to add mbus window for mem at %08x+%08x\n",
389 (u32)pcie->mem.start, PCIE_MEM_SIZE);
390 }
391
392 /* Setup windows and configure host bridge */
393 mvebu_pcie_setup_wins(pcie);
394
395 /* Master + slave enable. */
396 reg = readl(pcie->base + PCIE_CMD_OFF);
397 reg |= PCI_COMMAND_MEMORY;
398 reg |= PCI_COMMAND_MASTER;
399 reg |= BIT(10); /* disable interrupts */
400 writel(reg, pcie->base + PCIE_CMD_OFF);
401
402 /* Setup U-Boot PCI Controller */
403 hose->first_busno = 0;
404 hose->current_busno = bus;
405
406 /* PCI memory space */
407 pci_set_region(hose->regions + 0, pcie->mem.start,
408 pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM);
409 pci_set_region(hose->regions + 1,
410 0, 0,
411 gd->ram_size,
412 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
413 hose->region_count = 2;
414
415 pci_set_ops(hose,
416 pci_hose_read_config_byte_via_dword,
417 pci_hose_read_config_word_via_dword,
418 mvebu_pcie_read_config_dword,
419 pci_hose_write_config_byte_via_dword,
420 pci_hose_write_config_word_via_dword,
421 mvebu_pcie_write_config_dword);
422 pci_register_hose(hose);
423
424 hose->last_busno = pci_hose_scan(hose);
425
426 /* Set BAR0 to internal registers */
427 writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0));
428 writel(0, pcie->base + PCIE_BAR_HI_OFF(0));
429
430 bus = hose->last_busno + 1;
Phil Sutter68010aa2015-12-25 14:41:20 +0100431
432 /* need to skip more for X4 links, otherwise scan will hang */
433 if (mvebu_soc_family() == MVEBU_SOC_AXP) {
434 if (mvebu_pex_unit_is_x4(i))
435 i += 3;
436 }
Anton Schubert98530e92015-08-11 11:54:01 +0200437 }
438}