board/pleb2/flash.c

/*
 * (C) Copyright 2000
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <mpc8xx.h>
/* environment.h defines the various CFG_ENV_... values in terms
 * of whichever ones are given in the configuration file.
 */
#include <environment.h>

flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */

/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
 *        has nothing to do with the flash chip being 8-bit or 16-bit.
 */
#ifdef CONFIG_FLASH_16BIT
typedef unsigned short FLASH_PORT_WIDTH;
typedef volatile unsigned short FLASH_PORT_WIDTHV;

#define	FLASH_ID_MASK	0xFFFF
#else
typedef unsigned long FLASH_PORT_WIDTH;
typedef volatile unsigned long FLASH_PORT_WIDTHV;

#define	FLASH_ID_MASK	0xFFFFFFFF
#endif

#define FPW	FLASH_PORT_WIDTH
#define FPWV	FLASH_PORT_WIDTHV

#define ORMASK(size) ((-size) & OR_AM_MSK)

/*-----------------------------------------------------------------------
 * Functions
 */
static ulong flash_get_size (FPWV * addr, flash_info_t * info);
static void flash_reset (flash_info_t * info);
static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data);
static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data);
static void flash_get_offsets (ulong base, flash_info_t * info);

#ifdef CFG_FLASH_PROTECTION
static void flash_sync_real_protect (flash_info_t * info);
#endif

/*-----------------------------------------------------------------------
 * flash_init()
 *
 * sets up flash_info and returns size of FLASH (bytes)
 */
unsigned long flash_init (void)
{
	unsigned long size_b;
	int i;

	/* Init: no FLASHes known */
	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
		flash_info[i].flash_id = FLASH_UNKNOWN;
	}

	size_b = flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[0]);

	flash_info[0].size = size_b;

	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx\n",
			size_b);
	}

	/* Do this again (was done already in flast_get_size), just
	 * in case we move it when remap the FLASH.
	 */
	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);

#ifdef CFG_FLASH_PROTECTION
	/* read the hardware protection status (if any) into the
	 * protection array in flash_info.
	 */
	flash_sync_real_protect (&flash_info[0]);
#endif

#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
	/* monitor protection ON by default */
	flash_protect (FLAG_PROTECT_SET,
		       CFG_MONITOR_BASE,
		       CFG_MONITOR_BASE + monitor_flash_len - 1,
		       &flash_info[0]);
#endif

#ifdef CFG_ENV_ADDR
	flash_protect (FLAG_PROTECT_SET,
		       CFG_ENV_ADDR,
		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
#endif

#ifdef CFG_ENV_ADDR_REDUND
	flash_protect (FLAG_PROTECT_SET,
		       CFG_ENV_ADDR_REDUND,
		       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
		       &flash_info[0]);
#endif

	return (size_b);
}

/*-----------------------------------------------------------------------
 */
static void flash_reset (flash_info_t * info)
{
	FPWV *base = (FPWV *) (info->start[0]);

	/* Put FLASH back in read mode */
	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
		*base = (FPW) 0x00FF00FF;	/* Intel Read Mode */
	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
		*base = (FPW) 0x00F000F0;	/* AMD Read Mode */
}

/*-----------------------------------------------------------------------
 */
static void flash_get_offsets (ulong base, flash_info_t * info)
{
	int i;

	/* set up sector start address table */
	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
	    && (info->flash_id & FLASH_BTYPE)) {
		int bootsect_size;	/* number of bytes/boot sector  */
		int sect_size;	/* number of bytes/regular sector */

		bootsect_size = 0x00002000 * (sizeof (FPW) / 2);
		sect_size = 0x00010000 * (sizeof (FPW) / 2);

		/* set sector offsets for bottom boot block type        */
		for (i = 0; i < 8; ++i) {
			info->start[i] = base + (i * bootsect_size);
		}
		for (i = 8; i < info->sector_count; i++) {
			info->start[i] = base + ((i - 7) * sect_size);
		}
	} else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
		   && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {

		int sect_size;	/* number of bytes/sector */

		sect_size = 0x00010000 * (sizeof (FPW) / 2);

		/* set up sector start address table (uniform sector type) */
		for (i = 0; i < info->sector_count; i++)
			info->start[i] = base + (i * sect_size);
	} else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
		   && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM800T) {

		int sect_size;	/* number of bytes/sector */

		sect_size = 0x00010000 * (sizeof (FPW) / 2);

		/* set up sector start address table (top boot sector type) */
		for (i = 0; i < info->sector_count - 3; i++)
			info->start[i] = base + (i * sect_size);
		i = info->sector_count - 1;
		info->start[i--] =
			base + (info->size - 0x00004000) * (sizeof (FPW) / 2);
		info->start[i--] =
			base + (info->size - 0x00006000) * (sizeof (FPW) / 2);
		info->start[i--] =
			base + (info->size - 0x00008000) * (sizeof (FPW) / 2);
	}
}

/*-----------------------------------------------------------------------
 */

void flash_print_info (flash_info_t * info)
{
	int i;
	uchar *boottype;
	uchar *bootletter;
	char *fmt;
	uchar botbootletter[] = "B";
	uchar topbootletter[] = "T";
	uchar botboottype[] = "bottom boot sector";
	uchar topboottype[] = "top boot sector";

	if (info->flash_id == FLASH_UNKNOWN) {
		printf ("missing or unknown FLASH type\n");
		return;
	}

	switch (info->flash_id & FLASH_VENDMASK) {
	case FLASH_MAN_AMD:
		printf ("AMD ");
		break;
	case FLASH_MAN_BM:
		printf ("BRIGHT MICRO ");
		break;
	case FLASH_MAN_FUJ:
		printf ("FUJITSU ");
		break;
	case FLASH_MAN_SST:
		printf ("SST ");
		break;
	case FLASH_MAN_STM:
		printf ("STM ");
		break;
	case FLASH_MAN_INTEL:
		printf ("INTEL ");
		break;
	default:
		printf ("Unknown Vendor ");
		break;
	}

	/* check for top or bottom boot, if it applies */
	if (info->flash_id & FLASH_BTYPE) {
		boottype = botboottype;
		bootletter = botbootletter;
	} else {
		boottype = topboottype;
		bootletter = topbootletter;
	}

	switch (info->flash_id & FLASH_TYPEMASK) {
	case FLASH_AM800T:
		fmt = "29LV800B%s (8 Mbit, %s)\n";
		break;
	case FLASH_AM640U:
		fmt = "29LV641D (64 Mbit, uniform sectors)\n";
		break;
	case FLASH_28F800C3B:
	case FLASH_28F800C3T:
		fmt = "28F800C3%s (8 Mbit, %s)\n";
		break;
	case FLASH_INTEL800B:
	case FLASH_INTEL800T:
		fmt = "28F800B3%s (8 Mbit, %s)\n";
		break;
	case FLASH_28F160C3B:
	case FLASH_28F160C3T:
		fmt = "28F160C3%s (16 Mbit, %s)\n";
		break;
	case FLASH_INTEL160B:
	case FLASH_INTEL160T:
		fmt = "28F160B3%s (16 Mbit, %s)\n";
		break;
	case FLASH_28F320C3B:
	case FLASH_28F320C3T:
		fmt = "28F320C3%s (32 Mbit, %s)\n";
		break;
	case FLASH_INTEL320B:
	case FLASH_INTEL320T:
		fmt = "28F320B3%s (32 Mbit, %s)\n";
		break;
	case FLASH_28F640C3B:
	case FLASH_28F640C3T:
		fmt = "28F640C3%s (64 Mbit, %s)\n";
		break;
	case FLASH_INTEL640B:
	case FLASH_INTEL640T:
		fmt = "28F640B3%s (64 Mbit, %s)\n";
		break;
	default:
		fmt = "Unknown Chip Type\n";
		break;
	}

	printf (fmt, bootletter, boottype);

	printf ("  Size: %ld MB in %d Sectors\n",
		info->size >> 20, info->sector_count);

	printf ("  Sector Start Addresses:");

	for (i = 0; i < info->sector_count; ++i) {
		if ((i % 5) == 0) {
			printf ("\n   ");
		}

		printf (" %08lX%s", info->start[i],
			info->protect[i] ? " (RO)" : "     ");
	}

	printf ("\n");
}

/*-----------------------------------------------------------------------
 */

/*
 * The following code cannot be run from FLASH!
 */

ulong flash_get_size (FPWV * addr, flash_info_t * info)
{
	/* Write auto select command: read Manufacturer ID */

	/* Write auto select command sequence and test FLASH answer */
	addr[0x0555] = (FPW) 0x00AA00AA;	/* for AMD, Intel ignores this */
	addr[0x02AA] = (FPW) 0x00550055;	/* for AMD, Intel ignores this */
	addr[0x0555] = (FPW) 0x00900090;	/* selects Intel or AMD */

	/* The manufacturer codes are only 1 byte, so just use 1 byte.
	 * This works for any bus width and any FLASH device width.
	 */
	switch (addr[0] & 0xff) {

	case (uchar) AMD_MANUFACT:
		info->flash_id = FLASH_MAN_AMD;
		break;

	case (uchar) INTEL_MANUFACT:
		info->flash_id = FLASH_MAN_INTEL;
		break;

	default:
		info->flash_id = FLASH_UNKNOWN;
		info->sector_count = 0;
		info->size = 0;
		break;
	}

	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
	if (info->flash_id != FLASH_UNKNOWN)
		switch (addr[1]) {

		case (FPW) AMD_ID_LV800T:
			info->flash_id += FLASH_AM800T;
			info->sector_count = 19;
			info->size = 0x00100000 * (sizeof (FPW) / 2);
			break;	/* => 1 or 2 MiB        */

		case (FPW) AMD_ID_LV640U:	/* 29LV640 and 29LV641 have same ID */
			info->flash_id += FLASH_AM640U;
			info->sector_count = 128;
			info->size = 0x00800000 * (sizeof (FPW) / 2);
			break;	/* => 8 or 16 MB        */

		case (FPW) INTEL_ID_28F800C3B:
			info->flash_id += FLASH_28F800C3B;
			info->sector_count = 23;
			info->size = 0x00100000 * (sizeof (FPW) / 2);
			break;	/* => 1 or 2 MB         */

		case (FPW) INTEL_ID_28F800B3B:
			info->flash_id += FLASH_INTEL800B;
			info->sector_count = 23;
			info->size = 0x00100000 * (sizeof (FPW) / 2);
			break;	/* => 1 or 2 MB         */

		case (FPW) INTEL_ID_28F160C3B:
			info->flash_id += FLASH_28F160C3B;
			info->sector_count = 39;
			info->size = 0x00200000 * (sizeof (FPW) / 2);
			break;	/* => 2 or 4 MB         */

		case (FPW) INTEL_ID_28F160B3B:
			info->flash_id += FLASH_INTEL160B;
			info->sector_count = 39;
			info->size = 0x00200000 * (sizeof (FPW) / 2);
			break;	/* => 2 or 4 MB         */

		case (FPW) INTEL_ID_28F320C3B:
			info->flash_id += FLASH_28F320C3B;
			info->sector_count = 71;
			info->size = 0x00400000 * (sizeof (FPW) / 2);
			break;	/* => 4 or 8 MB         */

		case (FPW) INTEL_ID_28F320B3B:
			info->flash_id += FLASH_INTEL320B;
			info->sector_count = 71;
			info->size = 0x00400000 * (sizeof (FPW) / 2);
			break;	/* => 4 or 8 MB         */

		case (FPW) INTEL_ID_28F640C3B:
			info->flash_id += FLASH_28F640C3B;
			info->sector_count = 135;
			info->size = 0x00800000 * (sizeof (FPW) / 2);
			break;	/* => 8 or 16 MB        */

		case (FPW) INTEL_ID_28F640B3B:
			info->flash_id += FLASH_INTEL640B;
			info->sector_count = 135;
			info->size = 0x00800000 * (sizeof (FPW) / 2);
			break;	/* => 8 or 16 MB        */

		default:
			info->flash_id = FLASH_UNKNOWN;
			info->sector_count = 0;
			info->size = 0;
			return (0);	/* => no or unknown flash */
		}

	flash_get_offsets ((ulong) addr, info);

	/* Put FLASH back in read mode */
	flash_reset (info);

	return (info->size);
}

#ifdef CFG_FLASH_PROTECTION
/*-----------------------------------------------------------------------
 */

static void flash_sync_real_protect (flash_info_t * info)
{
	FPWV *addr = (FPWV *) (info->start[0]);
	FPWV *sect;
	int i;

	switch (info->flash_id & FLASH_TYPEMASK) {
	case FLASH_28F800C3B:
	case FLASH_28F800C3T:
	case FLASH_28F160C3B:
	case FLASH_28F160C3T:
	case FLASH_28F320C3B:
	case FLASH_28F320C3T:
	case FLASH_28F640C3B:
	case FLASH_28F640C3T:
		/* check for protected sectors */
		*addr = (FPW) 0x00900090;
		for (i = 0; i < info->sector_count; i++) {
			/* read sector protection at sector address, (A7 .. A0) = 0x02.
			 * D0 = 1 for each device if protected.
			 * If at least one device is protected the sector is marked
			 * protected, but mixed protected and  unprotected devices
			 * within a sector should never happen.
			 */
			sect = (FPWV *) (info->start[i]);
			info->protect[i] =
				(sect[2] & (FPW) (0x00010001)) ? 1 : 0;
		}

		/* Put FLASH back in read mode */
		flash_reset (info);
		break;

	case FLASH_AM640U:
	case FLASH_AM800T:
	default:
		/* no hardware protect that we support */
		break;
	}
}
#endif

/*-----------------------------------------------------------------------
 */

int flash_erase (flash_info_t * info, int s_first, int s_last)
{
	FPWV *addr;
	int flag, prot, sect;
	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
	ulong now, last;
	int rcode = 0;

	if ((s_first < 0) || (s_first > s_last)) {
		if (info->flash_id == FLASH_UNKNOWN) {
			printf ("- missing\n");
		} else {
			printf ("- no sectors to erase\n");
		}
		return 1;
	}

	switch (info->flash_id & FLASH_TYPEMASK) {
	case FLASH_INTEL800B:
	case FLASH_INTEL160B:
	case FLASH_INTEL320B:
	case FLASH_INTEL640B:
	case FLASH_28F800C3B:
	case FLASH_28F160C3B:
	case FLASH_28F320C3B:
	case FLASH_28F640C3B:
	case FLASH_AM640U:
	case FLASH_AM800T:
		break;
	case FLASH_UNKNOWN:
	default:
		printf ("Can't erase unknown flash type %08lx - aborted\n",
			info->flash_id);
		return 1;
	}

	prot = 0;
	for (sect = s_first; sect <= s_last; ++sect) {
		if (info->protect[sect]) {
			prot++;
		}
	}

	if (prot) {
		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
	} else {
		printf ("\n");
	}

	reset_timer_masked ();

	/* Start erase on unprotected sectors */
	for (sect = s_first; sect <= s_last && rcode == 0; sect++) {

		if (info->protect[sect] != 0)	/* protected, skip it */
			continue;

		/* Disable interrupts which might cause a timeout here */
		flag = disable_interrupts ();

		reset_timer_masked ();
		last = 0;

		addr = (FPWV *) (info->start[sect]);
		if (intel) {
			*addr = (FPW) 0x00500050;	/* clear status register */
			*addr = (FPW) 0x00200020;	/* erase setup */
			*addr = (FPW) 0x00D000D0;	/* erase confirm */
		} else {
			/* must be AMD style if not Intel */
			FPWV *base;	/* first address in bank */

			base = (FPWV *) (info->start[0]);
			base[0x0555] = (FPW) 0x00AA00AA;	/* unlock */
			base[0x02AA] = (FPW) 0x00550055;	/* unlock */
			base[0x0555] = (FPW) 0x00800080;	/* erase mode */
			base[0x0555] = (FPW) 0x00AA00AA;	/* unlock */
			base[0x02AA] = (FPW) 0x00550055;	/* unlock */
			*addr = (FPW) 0x00300030;	/* erase sector */
		}

		/* re-enable interrupts if necessary */
		if (flag)
			enable_interrupts ();

		/* wait at least 50us for AMD, 80us for Intel.
		 * Let's wait 1 ms.
		 */
		udelay (1000);

		while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
			if ((now =
			     get_timer_masked ()) > CFG_FLASH_ERASE_TOUT) {
				printf ("Timeout\n");

				if (intel) {
					/* suspend erase        */
					*addr = (FPW) 0x00B000B0;
				}

				flash_reset (info);	/* reset to read mode */
				rcode = 1;	/* failed */
				break;
			}

			/* show that we're waiting */
			if ((now - last) > 1 * CFG_HZ) {	/* every second */
				putc ('.');
				last = now;
			}
		}

		flash_reset (info);	/* reset to read mode   */
	}

	printf (" done\n");
	return rcode;
}

/*-----------------------------------------------------------------------
 * Copy memory to flash, returns:
 * 0 - OK
 * 1 - write timeout
 * 2 - Flash not erased
 */
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
	FPW data = 0;		/* 16 or 32 bit word, matches flash bus width on MPC8XX */
	int bytes;		/* number of bytes to program in current word         */
	int left;		/* number of bytes left to program                    */
	int i, res;

	for (left = cnt, res = 0;
	     left > 0 && res == 0;
	     addr += sizeof (data), left -= sizeof (data) - bytes) {

		bytes = addr & (sizeof (data) - 1);
		addr &= ~(sizeof (data) - 1);

		/* combine source and destination data so can program
		 * an entire word of 16 or 32 bits
		 */
#ifdef CFG_LITTLE_ENDIAN
		for (i = 0; i < sizeof (data); i++) {
			data >>= 8;
			if (i < bytes || i - bytes >= left)
				data += (*((uchar *) addr + i)) << 24;
			else
				data += (*src++) << 24;
		}
#else
		for (i = 0; i < sizeof (data); i++) {
			data <<= 8;
			if (i < bytes || i - bytes >= left)
				data += *((uchar *) addr + i);
			else
				data += *src++;
		}
#endif

		/* write one word to the flash */
		switch (info->flash_id & FLASH_VENDMASK) {
		case FLASH_MAN_AMD:
			res = write_word_amd (info, (FPWV *) addr, data);
			break;
		case FLASH_MAN_INTEL:
			res = write_word_intel (info, (FPWV *) addr, data);
			break;
		default:
			/* unknown flash type, error! */
			printf ("missing or unknown FLASH type\n");
			res = 1;	/* not really a timeout, but gives error */
			break;
		}
	}

	return (res);
}

/*-----------------------------------------------------------------------
 * Write a word to Flash for AMD FLASH
 * A word is 16 or 32 bits, whichever the bus width of the flash bank
 * (not an individual chip) is.
 *
 * returns:
 * 0 - OK
 * 1 - write timeout
 * 2 - Flash not erased
 */
static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data)
{
	int flag;
	int res = 0;		/* result, assume success       */
	FPWV *base;		/* first address in flash bank  */

	/* Check if Flash is (sufficiently) erased */
	if ((*dest & data) != data) {
		return (2);
	}


	base = (FPWV *) (info->start[0]);

	/* Disable interrupts which might cause a timeout here */
	flag = disable_interrupts ();

	base[0x0555] = (FPW) 0x00AA00AA;	/* unlock */
	base[0x02AA] = (FPW) 0x00550055;	/* unlock */
	base[0x0555] = (FPW) 0x00A000A0;	/* selects program mode */

	*dest = data;		/* start programming the data   */

	/* re-enable interrupts if necessary */
	if (flag)
		enable_interrupts ();

	reset_timer_masked ();

	/* data polling for D7 */
	while (res == 0
	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
			*dest = (FPW) 0x00F000F0;	/* reset bank */
			res = 1;
		}
	}

	return (res);
}

/*-----------------------------------------------------------------------
 * Write a word to Flash for Intel FLASH
 * A word is 16 or 32 bits, whichever the bus width of the flash bank
 * (not an individual chip) is.
 *
 * returns:
 * 0 - OK
 * 1 - write timeout
 * 2 - Flash not erased
 */
static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data)
{
	int flag;
	int res = 0;		/* result, assume success       */

	/* Check if Flash is (sufficiently) erased */
	if ((*dest & data) != data) {
		return (2);
	}

	/* Disable interrupts which might cause a timeout here */
	flag = disable_interrupts ();

	*dest = (FPW) 0x00500050;	/* clear status register        */
	*dest = (FPW) 0x00FF00FF;	/* make sure in read mode       */
	*dest = (FPW) 0x00400040;	/* program setup                */

	*dest = data;		/* start programming the data   */

	/* re-enable interrupts if necessary */
	if (flag)
		enable_interrupts ();

	reset_timer_masked ();

	while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
			*dest = (FPW) 0x00B000B0;	/* Suspend program      */
			res = 1;
		}
	}

	if (res == 0 && (*dest & (FPW) 0x00100010))
		res = 1;	/* write failed, time out error is close enough */

	*dest = (FPW) 0x00500050;	/* clear status register        */
	*dest = (FPW) 0x00FF00FF;	/* make sure in read mode       */

	return (res);
}

#ifdef CFG_FLASH_PROTECTION
/*-----------------------------------------------------------------------
 */
int flash_real_protect (flash_info_t * info, long sector, int prot)
{
	int rcode = 0;		/* assume success */
	FPWV *addr;		/* address of sector */
	FPW value;

	addr = (FPWV *) (info->start[sector]);

	switch (info->flash_id & FLASH_TYPEMASK) {
	case FLASH_28F800C3B:
	case FLASH_28F800C3T:
	case FLASH_28F160C3B:
	case FLASH_28F160C3T:
	case FLASH_28F320C3B:
	case FLASH_28F320C3T:
	case FLASH_28F640C3B:
	case FLASH_28F640C3T:
		flash_reset (info);	/* make sure in read mode */
		*addr = (FPW) 0x00600060L;	/* lock command setup */
		if (prot)
			*addr = (FPW) 0x00010001L;	/* lock sector */
		else
			*addr = (FPW) 0x00D000D0L;	/* unlock sector */
		flash_reset (info);	/* reset to read mode */

		/* now see if it really is locked/unlocked as requested */
		*addr = (FPW) 0x00900090;
		/* read sector protection at sector address, (A7 .. A0) = 0x02.
		 * D0 = 1 for each device if protected.
		 * If at least one device is protected the sector is marked
		 * protected, but return failure. Mixed protected and
		 * unprotected devices within a sector should never happen.
		 */
		value = addr[2] & (FPW) 0x00010001;
		if (value == 0)
			info->protect[sector] = 0;
		else if (value == (FPW) 0x00010001)
			info->protect[sector] = 1;
		else {
			/* error, mixed protected and unprotected */
			rcode = 1;
			info->protect[sector] = 1;
		}
		if (info->protect[sector] != prot)
			rcode = 1;	/* failed to protect/unprotect as requested */

		/* reload all protection bits from hardware for now */
		flash_sync_real_protect (info);
		break;

	case FLASH_AM640U:
	case FLASH_AM800T:
	default:
		/* no hardware protect that we support */
		info->protect[sector] = prot;
		break;
	}

	return rcode;
}
#endif