Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 6bb92fcf7d2fea2314d616e5e2391a8bf2b0fdfa / . / src / arm / nxp / imx / imx6qdl-gw560x.dtsi
blob: 46cf4080fec384fc98413a48e59e3d52a1db6a62 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1/*
2 * Copyright 2017 Gateworks Corporation
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/input.h>
50#include <dt-bindings/interrupt-controller/irq.h>
51
52/ {
53 /* these are used by bootloader for disabling nodes */
54 aliases {
55 led0 = &led0;
56 led1 = &led1;
57 led2 = &led2;
58 ssi0 = &ssi1;
59 usb0 = &usbh1;
60 usb1 = &usbotg;
61 };
62
63 chosen {
64 stdout-path = &uart2;
65 };
66
67 backlight-display {
68 compatible = "pwm-backlight";
69 pwms = <&pwm4 0 5000000>;
70 brightness-levels = <
71 0 1 2 3 4 5 6 7 8 9
72 10 11 12 13 14 15 16 17 18 19
73 20 21 22 23 24 25 26 27 28 29
74 30 31 32 33 34 35 36 37 38 39
75 40 41 42 43 44 45 46 47 48 49
76 50 51 52 53 54 55 56 57 58 59
77 60 61 62 63 64 65 66 67 68 69
78 70 71 72 73 74 75 76 77 78 79
79 80 81 82 83 84 85 86 87 88 89
80 90 91 92 93 94 95 96 97 98 99
81 100
82 >;
83 default-brightness-level = <100>;
84 };
85
86 backlight-keypad {
87 compatible = "gpio-backlight";
88 gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
89 default-on;
90 };
91
92 gpio-keys {
93 compatible = "gpio-keys";
94
95 user-pb {
96 label = "user_pb";
97 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
98 linux,code = <BTN_0>;
99 };
100
101 user-pb1x {
102 label = "user_pb1x";
103 linux,code = <BTN_1>;
104 interrupt-parent = <&gsc>;
105 interrupts = <0>;
106 };
107
108 key-erased {
109 label = "key-erased";
110 linux,code = <BTN_2>;
111 interrupt-parent = <&gsc>;
112 interrupts = <1>;
113 };
114
115 eeprom-wp {
116 label = "eeprom_wp";
117 linux,code = <BTN_3>;
118 interrupt-parent = <&gsc>;
119 interrupts = <2>;
120 };
121
122 tamper {
123 label = "tamper";
124 linux,code = <BTN_4>;
125 interrupt-parent = <&gsc>;
126 interrupts = <5>;
127 };
128
129 switch-hold {
130 label = "switch_hold";
131 linux,code = <BTN_5>;
132 interrupt-parent = <&gsc>;
133 interrupts = <7>;
134 };
135 };
136
137 leds {
138 compatible = "gpio-leds";
139 pinctrl-names = "default";
140 pinctrl-0 = <&pinctrl_gpio_leds>;
141
142 led0: led-user1 {
143 label = "user1";
144 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
145 default-state = "on";
146 linux,default-trigger = "heartbeat";
147 };
148
149 led1: led-user2 {
150 label = "user2";
151 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
152 default-state = "off";
153 };
154
155 led2: led-user3 {
156 label = "user3";
157 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
158 default-state = "off";
159 };
160 };
161
162 memory@10000000 {
163 device_type = "memory";
164 reg = <0x10000000 0x40000000>;
165 };
166
167 pps {
168 compatible = "pps-gpio";
169 pinctrl-names = "default";
170 pinctrl-0 = <&pinctrl_pps>;
171 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
172 };
173
174 reg_2p5v: regulator-2p5v {
175 compatible = "regulator-fixed";
176 regulator-name = "2P5V";
177 regulator-min-microvolt = <2500000>;
178 regulator-max-microvolt = <2500000>;
179 regulator-always-on;
180 };
181
182 reg_3p3v: regulator-3p3v {
183 compatible = "regulator-fixed";
184 regulator-name = "3P3V";
185 regulator-min-microvolt = <3300000>;
186 regulator-max-microvolt = <3300000>;
187 regulator-always-on;
188 };
189
190 reg_5p0v: regulator-5p0v {
191 compatible = "regulator-fixed";
192 regulator-name = "5P0V";
193 regulator-min-microvolt = <5000000>;
194 regulator-max-microvolt = <5000000>;
195 regulator-always-on;
196 };
197
198 reg_12p0v: regulator-12p0v {
199 compatible = "regulator-fixed";
200 regulator-name = "12P0V";
201 regulator-min-microvolt = <12000000>;
202 regulator-max-microvolt = <12000000>;
203 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
204 enable-active-high;
205 };
206
207 reg_1p4v: regulator-vddsoc {
208 compatible = "regulator-fixed";
209 regulator-name = "vdd_soc";
210 regulator-min-microvolt = <1400000>;
211 regulator-max-microvolt = <1400000>;
212 regulator-always-on;
213 };
214
215 reg_usb_h1_vbus: regulator-usb-h1-vbus {
216 compatible = "regulator-fixed";
217 regulator-name = "usb_h1_vbus";
218 regulator-min-microvolt = <5000000>;
219 regulator-max-microvolt = <5000000>;
220 regulator-always-on;
221 };
222
223 reg_usb_otg_vbus: regulator-usb-otg-vbus {
224 compatible = "regulator-fixed";
225 regulator-name = "usb_otg_vbus";
226 regulator-min-microvolt = <5000000>;
227 regulator-max-microvolt = <5000000>;
228 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
229 enable-active-high;
230 };
231
232 sound {
233 compatible = "fsl,imx6q-ventana-sgtl5000",
234 "fsl,imx-audio-sgtl5000";
235 model = "sgtl5000-audio";
236 ssi-controller = <&ssi1>;
237 audio-codec = <&sgtl5000>;
238 audio-routing =
239 "MIC_IN", "Mic Jack",
240 "Mic Jack", "Mic Bias",
241 "Headphone Jack", "HP_OUT";
242 mux-int-port = <1>;
243 mux-ext-port = <4>;
244 };
245};
246
247&audmux {
248 pinctrl-names = "default";
249 pinctrl-0 = <&pinctrl_audmux>;
250 status = "okay";
251};
252
253&ecspi3 {
254 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
255 pinctrl-names = "default";
256 pinctrl-0 = <&pinctrl_ecspi3>;
257 status = "okay";
258};
259
260&can1 {
261 pinctrl-names = "default";
262 pinctrl-0 = <&pinctrl_flexcan>;
263 status = "okay";
264};
265
266&clks {
267 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
268 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
269 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
270 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
271};
272
273&fec {
274 pinctrl-names = "default";
275 pinctrl-0 = <&pinctrl_enet>;
276 phy-mode = "rgmii-id";
277 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
278 status = "okay";
279};
280
281&hdmi {
282 ddc-i2c-bus = <&i2c3>;
283 status = "okay";
284};
285
286&i2c1 {
287 clock-frequency = <100000>;
288 pinctrl-names = "default";
289 pinctrl-0 = <&pinctrl_i2c1>;
290 status = "okay";
291
292 gsc: gsc@20 {
293 compatible = "gw,gsc";
294 reg = <0x20>;
295 interrupt-parent = <&gpio1>;
296 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
297 interrupt-controller;
298 #interrupt-cells = <1>;
299 #size-cells = <0>;
300
301 adc {
302 compatible = "gw,gsc-adc";
303 #address-cells = <1>;
304 #size-cells = <0>;
305
306 channel@0 {
307 gw,mode = <0>;
308 reg = <0x00>;
309 label = "temp";
310 };
311
312 channel@2 {
313 gw,mode = <1>;
314 reg = <0x02>;
315 label = "vdd_vin";
316 };
317
318 channel@5 {
319 gw,mode = <1>;
320 reg = <0x05>;
321 label = "vdd_3p3";
322 };
323
324 channel@8 {
325 gw,mode = <1>;
326 reg = <0x08>;
327 label = "vdd_bat";
328 };
329
330 channel@b {
331 gw,mode = <1>;
332 reg = <0x0b>;
333 label = "vdd_5p0";
334 };
335
336 channel@e {
337 gw,mode = <1>;
338 reg = <0xe>;
339 label = "vdd_arm";
340 };
341
342 channel@11 {
343 gw,mode = <1>;
344 reg = <0x11>;
345 label = "vdd_soc";
346 };
347
348 channel@14 {
349 gw,mode = <1>;
350 reg = <0x14>;
351 label = "vdd_3p0";
352 };
353
354 channel@17 {
355 gw,mode = <1>;
356 reg = <0x17>;
357 label = "vdd_1p5";
358 };
359
360 channel@1d {
361 gw,mode = <1>;
362 reg = <0x1d>;
363 label = "vdd_1p8";
364 };
365
366 channel@20 {
367 gw,mode = <1>;
368 reg = <0x20>;
369 label = "vdd_an1";
370 };
371
372 channel@23 {
373 gw,mode = <1>;
374 reg = <0x23>;
375 label = "vdd_2p5";
376 };
377
378 channel@26 {
379 gw,mode = <1>;
380 reg = <0x26>;
381 label = "vdd_gps";
382 };
383
384 channel@29 {
385 gw,mode = <1>;
386 reg = <0x29>;
387 label = "vdd_an2";
388 };
389 };
390 };
391
392 gsc_gpio: gpio@23 {
393 compatible = "nxp,pca9555";
394 reg = <0x23>;
395 gpio-controller;
396 #gpio-cells = <2>;
397 interrupt-parent = <&gsc>;
398 interrupts = <4>;
399 };
400
401 eeprom1: eeprom@50 {
402 compatible = "atmel,24c02";
403 reg = <0x50>;
404 pagesize = <16>;
405 };
406
407 eeprom2: eeprom@51 {
408 compatible = "atmel,24c02";
409 reg = <0x51>;
410 pagesize = <16>;
411 };
412
413 eeprom3: eeprom@52 {
414 compatible = "atmel,24c02";
415 reg = <0x52>;
416 pagesize = <16>;
417 };
418
419 eeprom4: eeprom@53 {
420 compatible = "atmel,24c02";
421 reg = <0x53>;
422 pagesize = <16>;
423 };
424
425 ds1672: rtc@68 {
426 compatible = "dallas,ds1672";
427 reg = <0x68>;
428 };
429};
430
431&i2c2 {
432 clock-frequency = <100000>;
433 pinctrl-names = "default";
434 pinctrl-0 = <&pinctrl_i2c2>;
435 status = "okay";
436
437 sgtl5000: codec@a {
438 compatible = "fsl,sgtl5000";
439 reg = <0x0a>;
440 #sound-dai-cells = <0>;
441 clocks = <&clks IMX6QDL_CLK_CKO>;
442 VDDA-supply = <&reg_1p8v>;
443 VDDIO-supply = <&reg_3p3v>;
444 };
445
446 magn@1c {
447 compatible = "st,lsm9ds1-magn";
448 reg = <0x1c>;
449 pinctrl-names = "default";
450 pinctrl-0 = <&pinctrl_mag>;
451 interrupt-parent = <&gpio5>;
452 interrupts = <9 IRQ_TYPE_EDGE_RISING>;
453 };
454
455 tca8418: keypad@34 {
456 compatible = "ti,tca8418";
457 pinctrl-names = "default";
458 pinctrl-0 = <&pinctrl_keypad>;
459 reg = <0x34>;
460 interrupt-parent = <&gpio5>;
461 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
462 linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
463 MATRIX_KEY(0x00, 0x00, BTN_1)
464 MATRIX_KEY(0x01, 0x01, BTN_2)
465 MATRIX_KEY(0x01, 0x00, BTN_3)
466 MATRIX_KEY(0x02, 0x00, BTN_4)
467 MATRIX_KEY(0x00, 0x03, BTN_5)
468 MATRIX_KEY(0x00, 0x02, BTN_6)
469 MATRIX_KEY(0x01, 0x03, BTN_7)
470 MATRIX_KEY(0x01, 0x02, BTN_8)
471 MATRIX_KEY(0x02, 0x02, BTN_9)
472 >;
473 keypad,num-rows = <4>;
474 keypad,num-columns = <4>;
475 };
476
477 ltc3676: pmic@3c {
478 compatible = "lltc,ltc3676";
479 pinctrl-names = "default";
480 pinctrl-0 = <&pinctrl_pmic>;
481 reg = <0x3c>;
482 interrupt-parent = <&gpio1>;
483 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
484
485 regulators {
486 /* VDD_DDR (1+R1/R2 = 2.105) */
487 reg_vdd_ddr: sw2 {
488 regulator-name = "vddddr";
489 regulator-min-microvolt = <868310>;
490 regulator-max-microvolt = <1684000>;
491 lltc,fb-voltage-divider = <221000 200000>;
492 regulator-ramp-delay = <7000>;
493 regulator-boot-on;
494 regulator-always-on;
495 };
496
497 /* VDD_ARM (1+R1/R2 = 1.931) */
498 reg_vdd_arm: sw3 {
499 regulator-name = "vddarm";
500 regulator-min-microvolt = <796551>;
501 regulator-max-microvolt = <1544827>;
502 lltc,fb-voltage-divider = <243000 261000>;
503 regulator-ramp-delay = <7000>;
504 regulator-boot-on;
505 regulator-always-on;
506 linux,phandle = <&reg_vdd_arm>;
507 };
508
509 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
510 reg_1p8v: sw4 {
511 regulator-name = "vdd1p8";
512 regulator-min-microvolt = <1033310>;
513 regulator-max-microvolt = <2004000>;
514 lltc,fb-voltage-divider = <301000 200000>;
515 regulator-ramp-delay = <7000>;
516 regulator-boot-on;
517 regulator-always-on;
518 };
519
520 /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
521 reg_1p0v: ldo2 {
522 regulator-name = "vdd1p0";
523 regulator-min-microvolt = <950000>;
524 regulator-max-microvolt = <1050000>;
525 lltc,fb-voltage-divider = <78700 200000>;
526 regulator-boot-on;
527 regulator-always-on;
528 };
529
530 /* VDD_AUD_1P8: Audio codec */
531 reg_aud_1p8v: ldo3 {
532 regulator-name = "vdd1p8a";
533 regulator-min-microvolt = <1800000>;
534 regulator-max-microvolt = <1800000>;
535 regulator-boot-on;
536 };
537
538 /* VDD_HIGH (1+R1/R2 = 4.17) */
539 reg_3p0v: ldo4 {
540 regulator-name = "vdd3p0";
541 regulator-min-microvolt = <3023250>;
542 regulator-max-microvolt = <3023250>;
543 lltc,fb-voltage-divider = <634000 200000>;
544 regulator-boot-on;
545 regulator-always-on;
546 };
547 };
548 };
549
550 imu@6a {
551 compatible = "st,lsm9ds1-imu";
552 reg = <0x6a>;
553 st,drdy-int-pin = <1>;
554 pinctrl-names = "default";
555 pinctrl-0 = <&pinctrl_imu>;
556 interrupt-parent = <&gpio5>;
557 interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
558 };
559};
560
561&i2c3 {
562 clock-frequency = <100000>;
563 pinctrl-names = "default";
564 pinctrl-0 = <&pinctrl_i2c3>;
565 status = "okay";
566
567 egalax_ts: touchscreen@4 {
568 compatible = "eeti,egalax_ts";
569 reg = <0x04>;
570 interrupt-parent = <&gpio5>;
571 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
572 wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
573 };
574};
575
576&ldb {
577 fsl,dual-channel;
578 status = "okay";
579
580 lvds-channel@0 {
581 fsl,data-mapping = "spwg";
582 fsl,data-width = <18>;
583 status = "okay";
584
585 display-timings {
586 native-mode = <&timing0>;
587 timing0: hsd100pxn1 {
588 clock-frequency = <65000000>;
589 hactive = <1024>;
590 vactive = <768>;
591 hback-porch = <220>;
592 hfront-porch = <40>;
593 vback-porch = <21>;
594 vfront-porch = <7>;
595 hsync-len = <60>;
596 vsync-len = <10>;
597 };
598 };
599 };
600};
601
602&pcie {
603 pinctrl-names = "default";
604 pinctrl-0 = <&pinctrl_pcie>;
605 reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
606 status = "okay";
607};
608
609&pwm2 {
610 pinctrl-names = "default";
611 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
612 status = "disabled";
613};
614
615&pwm3 {
616 pinctrl-names = "default";
617 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
618 status = "disabled";
619};
620
621&pwm4 {
622 #pwm-cells = <2>;
623 pinctrl-names = "default";
624 pinctrl-0 = <&pinctrl_pwm4>;
625 status = "okay";
626};
627
628&ssi1 {
629 status = "okay";
630};
631
632&uart1 {
633 pinctrl-names = "default";
634 pinctrl-0 = <&pinctrl_uart1>;
635 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
636 status = "okay";
637};
638
639&uart2 {
640 pinctrl-names = "default";
641 pinctrl-0 = <&pinctrl_uart2>;
642 status = "okay";
643};
644
645&uart5 {
646 pinctrl-names = "default";
647 pinctrl-0 = <&pinctrl_uart5>;
648 status = "okay";
649};
650
651&usbotg {
652 vbus-supply = <&reg_usb_otg_vbus>;
653 pinctrl-names = "default";
654 pinctrl-0 = <&pinctrl_usbotg>;
655 disable-over-current;
656 status = "okay";
657};
658
659&usbh1 {
660 vbus-supply = <&reg_usb_h1_vbus>;
661 pinctrl-names = "default";
662 pinctrl-0 = <&pinctrl_usbh1>;
663 status = "okay";
664};
665
666&usdhc2 {
667 pinctrl-names = "default";
668 pinctrl-0 = <&pinctrl_usdhc2>;
669 bus-width = <8>;
670 vmmc-supply = <&reg_3p3v>;
671 non-removable;
672 status = "okay";
673};
674
675&usdhc3 {
676 pinctrl-names = "default", "state_100mhz", "state_200mhz";
677 pinctrl-0 = <&pinctrl_usdhc3>;
678 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
679 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
680 cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
681 vmmc-supply = <&reg_3p3v>;
682 status = "okay";
683};
684
685&wdog1 {
686 pinctrl-names = "default";
687 pinctrl-0 = <&pinctrl_wdog>;
688 fsl,ext-reset-output;
689};
690
691&iomuxc {
692 pinctrl_audmux: audmuxgrp {
693 fsl,pins = <
694 /* AUD4 */
695 MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
696 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
697 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
698 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
699 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
700 /* AUD6 */
701 MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0
702 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0
703 MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0
704 MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0
705 >;
706 };
707
708 pinctrl_ecspi3: escpi3grp {
709 fsl,pins = <
710 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
711 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
712 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
713 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
714 >;
715 };
716
717 pinctrl_enet: enetgrp {
718 fsl,pins = <
719 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
720 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
721 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
722 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
723 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
724 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
725 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
726 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
727 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
728 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
729 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
730 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
731 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
732 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
733 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
734 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
735 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */
736 >;
737 };
738
739 pinctrl_flexcan: flexcangrp {
740 fsl,pins = <
741 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
742 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
743 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
744 >;
745 };
746
747 pinctrl_gpio_leds: gpioledsgrp {
748 fsl,pins = <
749 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
750 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
751 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
752 >;
753 };
754
755 pinctrl_i2c1: i2c1grp {
756 fsl,pins = <
757 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
758 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
759 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
760 >;
761 };
762
763 pinctrl_i2c2: i2c2grp {
764 fsl,pins = <
765 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
766 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
767 >;
768 };
769
770 pinctrl_i2c3: i2c3grp {
771 fsl,pins = <
772 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
773 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
774 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x4001b0b0 /* DIOI2C_DIS# */
775 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0001b0b0 /* LVDS_TOUCH_IRQ# */
776 MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0001b0b0 /* LVDS_BACKEN */
777 >;
778 };
779
780 pinctrl_imu: imugrp {
781 fsl,pins = <
782 MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b0
783 >;
784 };
785
786 pinctrl_keypad: keypadgrp {
787 fsl,pins = <
788 MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */
789 MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x0001b0b0 /* KEYPAD_LED_EN */
790 >;
791 };
792
793 pinctrl_mag: maggrp {
794 fsl,pins = <
795 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0
796 >;
797 };
798
799 pinctrl_pcie: pciegrp {
800 fsl,pins = <
801 MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */
802 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */
803 >;
804 };
805
806 pinctrl_pmic: pmicgrp {
807 fsl,pins = <
808 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
809 >;
810 };
811
812 pinctrl_pps: ppsgrp {
813 fsl,pins = <
814 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
815 >;
816 };
817
818 pinctrl_pwm2: pwm2grp {
819 fsl,pins = <
820 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
821 >;
822 };
823
824 pinctrl_pwm3: pwm3grp {
825 fsl,pins = <
826 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
827 >;
828 };
829
830 pinctrl_pwm4: pwm4grp {
831 fsl,pins = <
832 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
833 >;
834 };
835
836 pinctrl_uart1: uart1grp {
837 fsl,pins = <
838 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
839 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
840 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
841 >;
842 };
843
844 pinctrl_uart2: uart2grp {
845 fsl,pins = <
846 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
847 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
848 >;
849 };
850
851 pinctrl_uart5: uart5grp {
852 fsl,pins = <
853 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
854 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
855 >;
856 };
857
858 pinctrl_usbh1: usbh1grp {
859 fsl,pins = <
860 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* USBHUB_RST# */
861 >;
862 };
863
864 pinctrl_usbotg: usbotggrp {
865 fsl,pins = <
866 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
867 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
868 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
869 >;
870 };
871
872 pinctrl_usdhc2: usdhc2grp {
873 fsl,pins = <
874 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
875 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
876 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
877 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
878 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
879 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
880 MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x170f9
881 MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x170f9
882 MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x170f9
883 MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x170f9
884 >;
885 };
886
887 pinctrl_usdhc3: usdhc3grp {
888 fsl,pins = <
889 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
890 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
891 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
892 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
893 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
894 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
895 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
896 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
897 >;
898 };
899
900 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
901 fsl,pins = <
902 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
903 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
904 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
905 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
906 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
907 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
908 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
909 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
910 >;
911 };
912
913 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
914 fsl,pins = <
915 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
916 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
917 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
918 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
919 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
920 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
921 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
922 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
923 >;
924 };
925
926 pinctrl_wdog: wdoggrp {
927 fsl,pins = <
928 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
929 >;
930 };
931};