Blame - drivers/mmc/Kconfig - filogic/uboot

blob: e0927ce1c9bd6625e42b809af124d67c09bf011f [file] [log] [blame]

Nobuhiro Iwamatsu	3ec5f86	2014-12-17 08:03:00 +0900	[diff] [blame]	1	menu "MMC Host controller Support"
				2
Maxime Ripard	4f78074	2015-10-15 22:04:05 +0200	[diff] [blame]	3	config MMC
Masahiro Yamada	a5ed4be	2016-12-07 22:10:26 +0900	[diff] [blame]	4	bool "MMC/SD/SDIO card support"
				5	default ARM \|\| PPC \|\| SANDBOX
Adam Ford	b10ba90	2018-02-06 12:43:56 -0600	[diff] [blame]	6	select HAVE_BLOCK_DEVICE
Tom Rini	9b38400	2021-04-21 15:32:27 -0400	[diff] [blame]	7	select DM_MMC if DM
Maxime Ripard	4f78074	2015-10-15 22:04:05 +0200	[diff] [blame]	8	help
Masahiro Yamada	a5ed4be	2016-12-07 22:10:26 +0900	[diff] [blame]	9	This selects MultiMediaCard, Secure Digital and Secure
				10	Digital I/O support.
				11
				12	If you want MMC/SD/SDIO support, you should say Y here and
				13	also to your specific host controller driver.
Maxime Ripard	4f78074	2015-10-15 22:04:05 +0200	[diff] [blame]	14
Jean-Jacques Hiblot	d053167	2018-01-04 15:23:32 +0100	[diff] [blame]	15	config MMC_WRITE
				16	bool "support for MMC/SD write operations"
				17	depends on MMC
				18	default y
				19	help
				20	Enable write access to MMC and SD Cards
				21
Jaehoon Chung	48ad827	2021-02-16 10:16:52 +0900	[diff] [blame]	22	config MMC_PWRSEQ
				23	bool "HW reset support for eMMC"
				24	depends on PWRSEQ
				25	help
				26	Ths select Hardware reset support aka pwrseq-emmc for eMMC
				27	devices.
				28
Jun Nie	b4f4f6e	2018-01-02 12:25:57 +0800	[diff] [blame]	29	config MMC_BROKEN_CD
				30	bool "Poll for broken card detection case"
				31	help
				32	If card detection feature is broken, just poll to detect.
				33
Simon Glass	1e8eb1b	2015-06-23 15:38:48 -0600	[diff] [blame]	34	config DM_MMC
				35	bool "Enable MMC controllers using Driver Model"
				36	depends on DM
Tom Rini	9b38400	2021-04-21 15:32:27 -0400	[diff] [blame]	37	select BLK
Simon Glass	1e8eb1b	2015-06-23 15:38:48 -0600	[diff] [blame]	38	help
Robert P. J. Day	8d56db9	2016-07-15 13:44:45 -0400	[diff] [blame]	39	This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glass	1e8eb1b	2015-06-23 15:38:48 -0600	[diff] [blame]	40	Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
				41	and non-removable (e.g. eMMC chip) devices are supported. These
				42	appear as block devices in U-Boot and can support filesystems such
				43	as EXT4 and FAT.
				44
Simon Glass	5f4bd8c	2017-07-04 13:31:19 -0600	[diff] [blame]	45	config SPL_DM_MMC
				46	bool "Enable MMC controllers using Driver Model in SPL"
				47	depends on SPL_DM && DM_MMC
				48	default y
				49	help
				50	This enables the MultiMediaCard (MMC) uclass which supports MMC and
				51	Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
				52	and non-removable (e.g. eMMC chip) devices are supported. These
				53	appear as block devices in U-Boot and can support filesystems such
				54	as EXT4 and FAT.
				55
Masahiro Yamada	e8b9972	2016-12-07 22:10:27 +0900	[diff] [blame]	56	if MMC
				57
Michael Walle	02016c6	2020-09-23 12:42:51 +0200	[diff] [blame]	58	config MMC_SDHCI_ADMA_HELPERS
				59	bool
				60
Bhargav Shah	a1afe25	2019-07-08 04:10:48 +0000	[diff] [blame]	61	config MMC_SPI
				62	bool "Support for SPI-based MMC controller"
				63	depends on DM_MMC && DM_SPI
				64	help
				65	This selects SPI-based MMC controllers.
				66	If you have an MMC controller on a SPI bus, say Y here.
				67
				68	If unsure, say N.
				69
				70	config MMC_SPI_CRC_ON
				71	bool "Support CRC for SPI-based MMC controller"
				72	depends on MMC_SPI
				73	default y
				74	help
				75	This enables CRC for SPI-based MMC controllers.
				76
				77	If unsure, say N.
				78
Patrice Chotard	fcce420	2017-10-23 10:57:31 +0200	[diff] [blame]	79	config ARM_PL180_MMCI
				80	bool "ARM AMBA Multimedia Card Interface and compatible support"
Patrice Chotard	fcce420	2017-10-23 10:57:31 +0200	[diff] [blame]	81	help
				82	This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
				83	Interface (PL180, PL181 and compatible) support.
				84	If you have an ARM(R) platform with a Multimedia Card slot,
				85	say Y or M here.
				86
Kishon Vijay Abraham I	07baaa6	2017-09-21 16:30:10 +0200	[diff] [blame]	87	config MMC_QUIRKS
				88	bool "Enable quirks"
				89	default y
				90	help
				91	Some cards and hosts may sometimes behave unexpectedly (quirks).
				92	This option enable workarounds to handle those quirks. Some of them
Joel Johnson	9cbee2c	2020-01-11 09:08:15 -0700	[diff] [blame]	93	are enabled by default, other may require additional flags or are
Kishon Vijay Abraham I	07baaa6	2017-09-21 16:30:10 +0200	[diff] [blame]	94	enabled by the host driver.
				95
Jean-Jacques Hiblot	1d7769a	2017-11-30 17:44:02 +0100	[diff] [blame]	96	config MMC_HW_PARTITIONING
				97	bool "Support for HW partitioning command(eMMC)"
				98	default y
				99	help
				100	This adds a command and an API to do hardware partitioning on eMMC
				101	devices.
				102
Alex Kiernan	60e0f61	2018-05-08 04:43:31 +0000	[diff] [blame]	103	config SUPPORT_EMMC_RPMB
				104	bool "Support eMMC replay protected memory block (RPMB)"
				105	imply CMD_MMC_RPMB
				106	help
				107	Enable support for reading, writing and programming the
				108	key for the Replay Protection Memory Block partition in eMMC.
				109
Alex Kiernan	0084877	2019-05-01 07:58:27 +0000	[diff] [blame]	110	config SUPPORT_EMMC_BOOT
				111	bool "Support some additional features of the eMMC boot partitions"
				112	help
				113	Enable support for eMMC boot partitions. This also enables
				114	extensions within the mmc command.
				115
Jean-Jacques Hiblot	6051e78	2017-11-30 17:44:01 +0100	[diff] [blame]	116	config MMC_IO_VOLTAGE
				117	bool "Support IO voltage configuration"
				118	help
				119	IO voltage configuration allows selecting the voltage level of the IO
				120	lines (not the level of main supply). This is required for UHS
				121	support. For eMMC this not mandatory, but not enabling this option may
				122	prevent the driver of using the faster modes.
				123
				124	config SPL_MMC_IO_VOLTAGE
				125	bool "Support IO voltage configuration in SPL"
Jean-Jacques Hiblot	6051e78	2017-11-30 17:44:01 +0100	[diff] [blame]	126	help
				127	IO voltage configuration allows selecting the voltage level of the IO
				128	lines (not the level of main supply). This is required for UHS
				129	support. For eMMC this not mandatory, but not enabling this option may
				130	prevent the driver of using the faster modes.
				131
				132	config MMC_UHS_SUPPORT
				133	bool "enable UHS support"
				134	depends on MMC_IO_VOLTAGE
				135	help
				136	The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
				137	cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
				138	frequency can go up to 208MHz (SDR104)
				139
				140	config SPL_MMC_UHS_SUPPORT
				141	bool "enable UHS support in SPL"
				142	depends on SPL_MMC_IO_VOLTAGE
				143	help
				144	The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
				145	cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
				146	frequency can go up to 208MHz (SDR104)
				147
Peng Fan	eede83b	2019-07-10 14:43:07 +0800	[diff] [blame]	148	config MMC_HS400_ES_SUPPORT
				149	bool "enable HS400 Enhanced Strobe support"
				150	help
				151	The HS400 Enhanced Strobe mode is support by some eMMC. The bus
				152	frequency is up to 200MHz. This mode does not tune the IO.
				153
				154	config SPL_MMC_HS400_ES_SUPPORT
				155	bool "enable HS400 Enhanced Strobe support in SPL"
				156	help
				157	The HS400 Enhanced Strobe mode is support by some eMMC. The bus
				158	frequency is up to 200MHz. This mode does not tune the IO.
				159
Peng Fan	4680125	2018-08-10 14:07:54 +0800	[diff] [blame]	160	config MMC_HS400_SUPPORT
				161	bool "enable HS400 support"
				162	select MMC_HS200_SUPPORT
				163	help
				164	The HS400 mode is support by some eMMC. The bus frequency is up to
				165	200MHz. This mode requires tuning the IO.
				166
				167	config SPL_MMC_HS400_SUPPORT
				168	bool "enable HS400 support in SPL"
Faiz Abbas	373954e	2019-08-01 16:33:36 +0530	[diff] [blame]	169	select SPL_MMC_HS200_SUPPORT
Peng Fan	4680125	2018-08-10 14:07:54 +0800	[diff] [blame]	170	help
				171	The HS400 mode is support by some eMMC. The bus frequency is up to
				172	200MHz. This mode requires tuning the IO.
				173
Jean-Jacques Hiblot	6051e78	2017-11-30 17:44:01 +0100	[diff] [blame]	174	config MMC_HS200_SUPPORT
				175	bool "enable HS200 support"
				176	help
				177	The HS200 mode is support by some eMMC. The bus frequency is up to
				178	200MHz. This mode requires tuning the IO.
				179
Jean-Jacques Hiblot	6051e78	2017-11-30 17:44:01 +0100	[diff] [blame]	180	config SPL_MMC_HS200_SUPPORT
				181	bool "enable HS200 support in SPL"
				182	help
				183	The HS200 mode is support by some eMMC. The bus frequency is up to
				184	200MHz. This mode requires tuning the IO.
				185
Jean-Jacques Hiblot	a94fb41	2017-09-21 16:29:53 +0200	[diff] [blame]	186	config MMC_VERBOSE
				187	bool "Output more information about the MMC"
				188	default y
				189	help
				190	Enable the output of more information about the card such as the
				191	operating mode.
				192
Jaehoon Chung	e2bf580	2018-01-26 19:25:31 +0900	[diff] [blame]	193	config MMC_TRACE
				194	bool "MMC debugging"
Jaehoon Chung	e2bf580	2018-01-26 19:25:31 +0900	[diff] [blame]	195	help
				196	This is an option for use by developer. Enable MMC core debugging.
				197
				198	If you need to see the MMC core message, say Y.
				199
Masahiro Yamada	b2c8868	2017-01-10 13:32:07 +0900	[diff] [blame]	200	config MMC_DAVINCI
				201	bool "TI DAVINCI Multimedia Card Interface support"
				202	depends on ARCH_DAVINCI
				203	default y
				204	help
				205	This selects the TI DAVINCI Multimedia card Interface.
				206	If you have an DAVINCI board with a Multimedia Card slot,
				207	say Y here. If unsure, say N.
				208
Masahiro Yamada	7942e91	2017-01-10 13:32:04 +0900	[diff] [blame]	209	config MMC_DW
				210	bool "Synopsys DesignWare Memory Card Interface"
Philipp Tomsich	b302747	2018-11-30 22:13:25 +0100	[diff] [blame]	211	select BOUNCE_BUFFER
Masahiro Yamada	7942e91	2017-01-10 13:32:04 +0900	[diff] [blame]	212	help
				213	This selects support for the Synopsys DesignWare Mobile Storage IP
				214	block, this provides host support for SD and MMC interfaces, in both
				215	PIO, internal DMA mode and external DMA mode.
				216
Arthur Li	055e18e	2020-02-20 18:19:35 -0800	[diff] [blame]	217	config MMC_DW_CORTINA
				218	bool "Cortina specific extensions for Synopsys DW Memory Card Interface"
				219	depends on DM_MMC
				220	depends on MMC_DW
				221	depends on BLK
Arthur Li	055e18e	2020-02-20 18:19:35 -0800	[diff] [blame]	222	help
				223	This selects support for Cortina SoC specific extensions to the
				224	Synopsys DesignWare Memory Card Interface driver. Select this option
				225	for platforms based on Cortina CAxxxx Soc's.
				226
Masahiro Yamada	f1ad728	2017-01-10 13:32:05 +0900	[diff] [blame]	227	config MMC_DW_EXYNOS
				228	bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
				229	depends on ARCH_EXYNOS
				230	depends on MMC_DW
				231	default y
				232	help
				233	This selects support for Samsung Exynos SoC specific extensions to the
				234	Synopsys DesignWare Memory Card Interface driver. Select this option
				235	for platforms based on Exynos4 and Exynos5 SoC's.
				236
				237	config MMC_DW_K3
				238	bool "K3 specific extensions for Synopsys DW Memory Card Interface"
				239	depends on MMC_DW
				240	help
				241	This selects support for Hisilicon K3 SoC specific extensions to the
				242	Synopsys DesignWare Memory Card Interface driver. Select this option
				243	for platforms based on Hisilicon K3 SoC's.
				244
Masahiro Yamada	dc607f8	2017-01-10 13:32:03 +0900	[diff] [blame]	245	config MMC_DW_ROCKCHIP
Simon Glass	4ecaa6d	2015-08-30 16:55:37 -0600	[diff] [blame]	246	bool "Rockchip SD/MMC controller support"
				247	depends on DM_MMC && OF_CONTROL
Masahiro Yamada	7942e91	2017-01-10 13:32:04 +0900	[diff] [blame]	248	depends on MMC_DW
Simon Glass	4ecaa6d	2015-08-30 16:55:37 -0600	[diff] [blame]	249	help
				250	This enables support for the Rockchip SD/MMM controller, which is
				251	based on Designware IP. The device is compatible with at least
				252	SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
				253	as removeable SD and micro-SD cards.
				254
Masahiro Yamada	f1ad728	2017-01-10 13:32:05 +0900	[diff] [blame]	255	config MMC_DW_SOCFPGA
				256	bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
				257	depends on ARCH_SOCFPGA
				258	depends on MMC_DW
				259	default y
				260	help
				261	This selects support for Altera SOCFPGA specific extensions to the
				262	Synopsys DesignWare Memory Card Interface driver. Select this option
				263	for platforms based on Altera SOCFPGA.
				264
Eugeniy Paltsev	b050c2c	2019-02-25 18:35:28 +0300	[diff] [blame]	265	config MMC_DW_SNPS
				266	bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards"
				267	depends on MMC_DW
				268	depends on DM_MMC
				269	depends on OF_CONTROL
				270	depends on CLK
				271	help
				272	This selects support for Synopsys DesignWare Memory Card Interface driver
				273	extensions used in various Synopsys ARC devboards.
				274
Stefan Bosch	22c12f7	2020-07-10 19:07:29 +0200	[diff] [blame]	275	config NEXELL_DWMMC
				276	bool "Nexell SD/MMC controller support"
				277	depends on ARCH_NEXELL
				278	depends on MMC_DW
				279	depends on DM_MMC
				280	depends on PINCTRL_NEXELL
				281	default y
				282
Carlo Caione	20cab78	2017-04-12 20:30:42 +0200	[diff] [blame]	283	config MMC_MESON_GX
				284	bool "Meson GX EMMC controller support"
Simon Glass	eba48f9	2017-07-29 11:35:31 -0600	[diff] [blame]	285	depends on DM_MMC && BLK && ARCH_MESON
Carlo Caione	20cab78	2017-04-12 20:30:42 +0200	[diff] [blame]	286	help
				287	Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
				288
Masahiro Yamada	b2c8868	2017-01-10 13:32:07 +0900	[diff] [blame]	289	config MMC_MXC
				290	bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
				291	help
				292	This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
				293	Multimedia Card Interface. If you have an i.MX or MPC512x platform
				294	with a Multimedia Card slot, say Y here.
				295
				296	If unsure, say N.
				297
				298	config MMC_MXS
				299	bool "Freescale MXS Multimedia Card Interface support"
Adam Ford	a456d56	2018-02-06 08:34:45 -0600	[diff] [blame]	300	depends on MX23 \|\| MX28 \|\| MX6 \|\| MX7
Philipp Tomsich	b302747	2018-11-30 22:13:25 +0100	[diff] [blame]	301	select BOUNCE_BUFFER
Adam Ford	a456d56	2018-02-06 08:34:45 -0600	[diff] [blame]	302	select APBH_DMA
				303	select APBH_DMA_BURST if ARCH_MX6 \|\| ARCH_MX7
				304	select APBH_DMA_BURST8 if ARCH_MX6 \|\| ARCH_MX7
Masahiro Yamada	b2c8868	2017-01-10 13:32:07 +0900	[diff] [blame]	305	help
				306	This selects the Freescale SSP MMC controller found on MXS based
				307	platforms like mx23/28.
				308
				309	If unsure, say N.
				310
Felipe Balbi	ecf7dfd	2017-02-20 14:24:13 +0300	[diff] [blame]	311	config MMC_PCI
				312	bool "Support for MMC controllers on PCI"
Bin Meng	3d81f02	2021-02-15 20:01:44 +0800	[diff] [blame]	313	depends on MMC_SDHCI
Felipe Balbi	ecf7dfd	2017-02-20 14:24:13 +0300	[diff] [blame]	314	help
				315	This selects PCI-based MMC controllers.
				316	If you have an MMC controller on a PCI bus, say Y here.
				317
Suneel Garapati	40e6133	2019-10-19 18:03:01 -0700	[diff] [blame]	318	config MMC_OCTEONTX
Stefan Roese	e06f552	2021-03-12 09:48:25 +0100	[diff] [blame]	319	bool "Marvell Octeon Multimedia Card Interface support"
				320	depends on (ARCH_OCTEON \|\| ARCH_OCTEONTX \|\| ARCH_OCTEONTX2)
Suneel Garapati	40e6133	2019-10-19 18:03:01 -0700	[diff] [blame]	321	depends on DM_MMC
				322	help
Stefan Roese	e06f552	2021-03-12 09:48:25 +0100	[diff] [blame]	323	This selects the Octeon Multimedia card Interface.
				324	If you have an OcteonTX/TX2 or MIPS Octeon board with a
				325	Multimedia Card slot, say Y here.
Suneel Garapati	40e6133	2019-10-19 18:03:01 -0700	[diff] [blame]	326
Felipe Balbi	ecf7dfd	2017-02-20 14:24:13 +0300	[diff] [blame]	327	If unsure, say N.
				328
Harm Berntsen	7b9e5af	2021-03-30 10:19:41 +0200	[diff] [blame]	329	config MVEBU_MMC
				330	bool "Kirkwood MMC controller support"
				331	depends on DM_MMC && BLK && ARCH_KIRKWOOD
				332	help
				333	Support for MMC host controller on Kirkwood SoCs.
				334	If you are on a Kirkwood architecture, say Y here.
				335
				336	If unsure, say N.
				337
Marcel Ziswiler	82c645c	2019-05-20 02:44:58 +0200	[diff] [blame]	338	config PXA_MMC_GENERIC
				339	bool "Support for MMC controllers on PXA"
				340	help
				341	This selects MMC controllers on PXA.
				342	If you are on a PXA architecture, say Y here.
				343
				344	If unsure, say N.
				345
Masahiro Yamada	b2c8868	2017-01-10 13:32:07 +0900	[diff] [blame]	346	config MMC_OMAP_HS
				347	bool "TI OMAP High Speed Multimedia Card Interface support"
Simon Glass	eba48f9	2017-07-29 11:35:31 -0600	[diff] [blame]	348	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Jean-Jacques Hiblot	4612bdd	2017-09-21 17:03:10 +0200	[diff] [blame]	349	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Masahiro Yamada	b2c8868	2017-01-10 13:32:07 +0900	[diff] [blame]	350	help
				351	This selects the TI OMAP High Speed Multimedia card Interface.
				352	If you have an omap2plus board with a Multimedia Card slot,
				353	say Y here.
				354
				355	If unsure, say N.
				356
Jean-Jacques Hiblot	cebf059	2018-02-23 10:40:18 +0100	[diff] [blame]	357	config MMC_OMAP_HS_ADMA
				358	bool "ADMA support for OMAP HS MMC"
				359	depends on MMC_OMAP_HS && !OMAP34XX
				360	default y if !AM33XX
				361	help
				362	This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
				363	controller). If supported by the hardware, selecting this option will
				364	increase performances.
				365
Adam Ford	ef35496	2017-02-06 11:31:43 -0600	[diff] [blame]	366	config MMC_OMAP36XX_PINS
				367	bool "Enable MMC1 on OMAP36xx/37xx"
				368	depends on OMAP34XX && MMC_OMAP_HS
				369	help
				370	This enables extended-drain in the MMC/SD/SDIO1I/O and
				371	GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
				372	specific to the OMAP36xx/37xx using MMC1
				373
				374	If you have a controller with this interface, say Y here.
				375
				376	If unsure, say N.
				377
Nobuhiro Iwamatsu	3ec5f86	2014-12-17 08:03:00 +0900	[diff] [blame]	378	config SH_SDHI
				379	bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
Marek Vasut	1c5a5a9	2017-05-13 15:51:14 +0200	[diff] [blame]	380	depends on ARCH_RMOBILE
Nobuhiro Iwamatsu	3ec5f86	2014-12-17 08:03:00 +0900	[diff] [blame]	381	help
				382	Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
				383
Marek Vasut	a8624ac	2018-04-21 17:40:20 +0200	[diff] [blame]	384	config SH_MMCIF
				385	bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
				386	depends on ARCH_RMOBILE \|\| SH
				387	help
				388	Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
				389
Masahiro Yamada	a0cfcc0	2016-02-18 19:52:48 +0900	[diff] [blame]	390	config MMC_UNIPHIER
Marek Vasut	2883f74	2017-09-23 13:30:30 +0200	[diff] [blame]	391	bool "UniPhier SD/MMC Host Controller support"
				392	depends on ARCH_UNIPHIER
Simon Glass	eba48f9	2017-07-29 11:35:31 -0600	[diff] [blame]	393	depends on BLK && DM_MMC
Masahiro Yamada	c232653	2016-12-30 23:20:14 +0900	[diff] [blame]	394	depends on OF_CONTROL
Masahiro Yamada	a0cfcc0	2016-02-18 19:52:48 +0900	[diff] [blame]	395	help
Marek Vasut	847ee0c	2017-07-21 23:24:36 +0200	[diff] [blame]	396	This selects support for the Matsushita SD/MMC Host Controller on
Marek Vasut	2883f74	2017-09-23 13:30:30 +0200	[diff] [blame]	397	SocioNext UniPhier SoCs.
				398
				399	config RENESAS_SDHI
				400	bool "Renesas R-Car SD/MMC Host Controller support"
				401	depends on ARCH_RMOBILE
				402	depends on BLK && DM_MMC
				403	depends on OF_CONTROL
Marek Vasut	9f7baeb	2020-04-04 12:45:04 +0200	[diff] [blame]	404	select BOUNCE_BUFFER
Marek Vasut	2883f74	2017-09-23 13:30:30 +0200	[diff] [blame]	405	help
				406	This selects support for the Matsushita SD/MMC Host Controller on
				407	Renesas R-Car SoCs.
Masahiro Yamada	a0cfcc0	2016-02-18 19:52:48 +0900	[diff] [blame]	408
Alexander Graf	044725f	2018-01-23 18:05:22 +0100	[diff] [blame]	409	config MMC_BCM2835
				410	bool "BCM2835 family custom SD/MMC Host Controller support"
				411	depends on ARCH_BCM283X
				412	depends on BLK && DM_MMC
				413	depends on OF_CONTROL
				414	default y
				415	help
				416	This selects support for the custom SD host controller in the BCM2835
				417	family of devices.
				418
				419	If you have a BCM2835 platform with SD or MMC devices, say Y here.
				420
				421	If unsure, say N.
				422
Paul Burton	8e14284	2018-12-16 19:25:20 -0300	[diff] [blame]	423	config JZ47XX_MMC
				424	bool "Ingenic JZ47xx SD/MMC Host Controller support"
				425	depends on ARCH_JZ47XX
				426	help
				427	This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
				428
Masahiro Yamada	54f7cfc	2017-01-30 19:46:50 +0900	[diff] [blame]	429	config MMC_SANDBOX
Simon Glass	f9eebac	2016-05-01 13:52:42 -0600	[diff] [blame]	430	bool "Sandbox MMC support"
Masahiro Yamada	54f7cfc	2017-01-30 19:46:50 +0900	[diff] [blame]	431	depends on SANDBOX
Simon Glass	eba48f9	2017-07-29 11:35:31 -0600	[diff] [blame]	432	depends on BLK && DM_MMC && OF_CONTROL
Simon Glass	f9eebac	2016-05-01 13:52:42 -0600	[diff] [blame]	433	help
				434	This select a dummy sandbox MMC driver. At present this does nothing
				435	other than allow sandbox to be build with MMC support. This
				436	improves build coverage for sandbox and makes it easier to detect
				437	MMC build errors with sandbox.
				438
Masahiro Yamada	7db8c17	2016-12-07 22:10:28 +0900	[diff] [blame]	439	config MMC_SDHCI
				440	bool "Secure Digital Host Controller Interface support"
				441	help
				442	This selects the generic Secure Digital Host Controller Interface.
				443	It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
				444	and Toshiba(R). Most controllers found in laptops are of this type.
				445
				446	If you have a controller with this interface, say Y here.
				447
				448	If unsure, say N.
				449
Masahiro Yamada	bfd110f	2016-12-07 22:10:30 +0900	[diff] [blame]	450	config MMC_SDHCI_IO_ACCESSORS
				451	bool
				452	depends on MMC_SDHCI
				453	help
				454	This is silent Kconfig symbol that is selected by the drivers that
				455	need to overwrite SDHCI IO memory accessors.
				456
Masahiro Yamada	124f6ce	2016-12-07 22:10:29 +0900	[diff] [blame]	457	config MMC_SDHCI_SDMA
				458	bool "Support SDHCI SDMA"
				459	depends on MMC_SDHCI
				460	help
				461	This enables support for the SDMA (Single Operation DMA) defined
				462	in the SD Host Controller Standard Specification Version 1.00 .
				463
Faiz Abbas	4c082a6	2019-04-16 23:06:58 +0530	[diff] [blame]	464	config MMC_SDHCI_ADMA
				465	bool "Support SDHCI ADMA2"
				466	depends on MMC_SDHCI
Michael Walle	02016c6	2020-09-23 12:42:51 +0200	[diff] [blame]	467	select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas	4c082a6	2019-04-16 23:06:58 +0530	[diff] [blame]	468	help
				469	This enables support for the ADMA (Advanced DMA) defined
				470	in the SD Host Controller Standard Specification Version 3.00
				471
				472	config SPL_MMC_SDHCI_ADMA
				473	bool "Support SDHCI ADMA2 in SPL"
				474	depends on MMC_SDHCI
Michael Walle	02016c6	2020-09-23 12:42:51 +0200	[diff] [blame]	475	select MMC_SDHCI_ADMA_HELPERS
Faiz Abbas	4c082a6	2019-04-16 23:06:58 +0530	[diff] [blame]	476	help
				477	This enables support for the ADMA (Advanced DMA) defined
				478	in the SD Host Controller Standard Specification Version 3.00 in SPL.
				479
Eddie James	c8a6581	2019-08-27 09:48:03 -0500	[diff] [blame]	480	config MMC_SDHCI_ASPEED
				481	bool "Aspeed SDHCI controller"
				482	depends on ARCH_ASPEED
				483	depends on DM_MMC
				484	depends on MMC_SDHCI
				485	help
				486	Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
				487	SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
				488	specifications. On the AST2600, the device is also compatible with
				489	MMC 5.1 and eMMC 3.0.
				490
Masahiro Yamada	8c1a132	2017-01-30 19:46:55 +0900	[diff] [blame]	491	config MMC_SDHCI_ATMEL
				492	bool "Atmel SDHCI controller support"
				493	depends on ARCH_AT91
Simon Glass	eba48f9	2017-07-29 11:35:31 -0600	[diff] [blame]	494	depends on DM_MMC && BLK && ARCH_AT91
Masahiro Yamada	8c1a132	2017-01-30 19:46:55 +0900	[diff] [blame]	495	depends on MMC_SDHCI
				496	help
				497	This enables support for the Atmel SDHCI controller, which supports
				498	the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
				499	Memory Card Specification V3.0, and the SDIO V3.0 specification.
				500	It is compliant with the SD Host Controller Standard V3.0
				501	specification.
				502
Masahiro Yamada	124f6ce	2016-12-07 22:10:29 +0900	[diff] [blame]	503	config MMC_SDHCI_BCM2835
				504	tristate "SDHCI support for the BCM2835 SD/MMC Controller"
				505	depends on ARCH_BCM283X
				506	depends on MMC_SDHCI
Masahiro Yamada	bfd110f	2016-12-07 22:10:30 +0900	[diff] [blame]	507	select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada	124f6ce	2016-12-07 22:10:29 +0900	[diff] [blame]	508	help
				509	This selects the BCM2835 SD/MMC controller.
				510
				511	If you have a BCM2835 platform with SD or MMC devices,
				512	say Y here.
				513
				514	If unsure, say N.
				515
Thomas Fitzsimmons	919646d	2018-06-08 17:59:45 -0400	[diff] [blame]	516	config MMC_SDHCI_BCMSTB
				517	tristate "SDHCI support for the BCMSTB SD/MMC Controller"
				518	depends on MMC_SDHCI
				519	help
				520	This selects the Broadcom set-top box SD/MMC controller.
				521
				522	If you have a BCMSTB platform with SD or MMC devices,
				523	say Y here.
				524
				525	If unsure, say N.
				526
Masahiro Yamada	dcbc443	2016-12-30 22:41:46 +0900	[diff] [blame]	527	config MMC_SDHCI_CADENCE
				528	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
Simon Glass	eba48f9	2017-07-29 11:35:31 -0600	[diff] [blame]	529	depends on BLK && DM_MMC
Masahiro Yamada	dcbc443	2016-12-30 22:41:46 +0900	[diff] [blame]	530	depends on MMC_SDHCI
				531	depends on OF_CONTROL
				532	help
				533	This selects the Cadence SD/SDIO/eMMC driver.
				534
				535	If you have a controller with this interface, say Y here.
				536
				537	If unsure, say N.
				538
Faiz Abbas	d8fb309	2019-06-11 00:43:31 +0530	[diff] [blame]	539	config MMC_SDHCI_AM654
				540	bool "SDHCI Controller on TI's Am654 devices"
Lokesh Vutla	bc9979f	2018-08-27 15:57:54 +0530	[diff] [blame]	541	depends on ARCH_K3
				542	depends on MMC_SDHCI
				543	depends on DM_MMC && OF_CONTROL && BLK
Faiz Abbas	e9aed58	2019-06-11 00:43:38 +0530	[diff] [blame]	544	depends on REGMAP
Faiz Abbas	36c8c5c	2021-02-04 15:10:54 +0530	[diff] [blame]	545	select MMC_SDHCI_IO_ACCESSORS
Lokesh Vutla	bc9979f	2018-08-27 15:57:54 +0530	[diff] [blame]	546	help
Faiz Abbas	d8fb309	2019-06-11 00:43:31 +0530	[diff] [blame]	547	Support for Secure Digital Host Controller Interface (SDHCI)
				548	controllers present on TI's AM654 SOCs.
Lokesh Vutla	bc9979f	2018-08-27 15:57:54 +0530	[diff] [blame]	549
Arun Parameswaran	2f4f34a	2019-09-12 11:06:08 -0700	[diff] [blame]	550	config MMC_SDHCI_IPROC
				551	bool "SDHCI support for the iProc SD/MMC Controller"
				552	depends on MMC_SDHCI
				553	help
				554	This selects the iProc SD/MMC controller.
				555
				556	If you have a Broadcom IPROC platform with SD or MMC devices,
				557	say Y or M here.
				558
				559	If unsure, say N.
				560
Jassi Brar	8188bda	2021-06-04 18:44:16 +0900	[diff] [blame]	561	config MMC_SDHCI_F_SDH30
				562	bool "SDHCI support for Fujitsu Semiconductor F_SDH30"
				563	depends on BLK && DM_MMC
				564	depends on MMC_SDHCI
				565	help
				566	This selects the Secure Digital Host Controller Interface (SDHCI)
				567	Needed by some Fujitsu SoC for MMC / SD / SDIO support.
				568	If you have a controller with this interface, say Y or M here.
				569	If unsure, say N.
				570
Masahiro Yamada	124f6ce	2016-12-07 22:10:29 +0900	[diff] [blame]	571	config MMC_SDHCI_KONA
				572	bool "SDHCI support on Broadcom KONA platform"
				573	depends on MMC_SDHCI
				574	help
				575	This selects the Broadcom Kona Secure Digital Host Controller
				576	Interface(SDHCI) support.
				577	This is used in Broadcom mobile SoCs.
				578
				579	If you have a controller with this interface, say Y here.
				580
Masahiro Yamada	a1262eb	2017-01-30 19:46:53 +0900	[diff] [blame]	581	config MMC_SDHCI_MSM
				582	bool "Qualcomm SDHCI controller"
Simon Glass	eba48f9	2017-07-29 11:35:31 -0600	[diff] [blame]	583	depends on BLK && DM_MMC
Masahiro Yamada	a1262eb	2017-01-30 19:46:53 +0900	[diff] [blame]	584	depends on MMC_SDHCI
				585	help
				586	Enables support for SDHCI 2.0 controller present on some Qualcomm
				587	Snapdragon devices. This device is compatible with eMMC v4.5 and
				588	SD 3.0 specifications. Both SD and eMMC devices are supported.
				589	Card-detect gpios are not supported.
				590
Masahiro Yamada	124f6ce	2016-12-07 22:10:29 +0900	[diff] [blame]	591	config MMC_SDHCI_MV
				592	bool "SDHCI support on Marvell platform"
				593	depends on ARCH_MVEBU
				594	depends on MMC_SDHCI
				595	help
				596	This selects the Secure Digital Host Controller Interface on
				597	Marvell platform.
				598
				599	If you have a controller with this interface, say Y here.
				600
				601	If unsure, say N.
				602
Masahiro Yamada	f79df03	2017-01-30 19:46:54 +0900	[diff] [blame]	603	config MMC_SDHCI_PIC32
				604	bool "Microchip PIC32 on-chip SDHCI support"
				605	depends on DM_MMC && MACH_PIC32
				606	depends on MMC_SDHCI
				607	help
				608	Support for Microchip PIC32 SDHCI controller.
				609
Masahiro Yamada	babe026	2017-01-30 19:46:52 +0900	[diff] [blame]	610	config MMC_SDHCI_ROCKCHIP
				611	bool "Arasan SDHCI controller for Rockchip support"
				612	depends on ARCH_ROCKCHIP
Simon Glass	eba48f9	2017-07-29 11:35:31 -0600	[diff] [blame]	613	depends on DM_MMC && BLK
Masahiro Yamada	babe026	2017-01-30 19:46:52 +0900	[diff] [blame]	614	depends on MMC_SDHCI
				615	help
				616	Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
				617
Masahiro Yamada	124f6ce	2016-12-07 22:10:29 +0900	[diff] [blame]	618	config MMC_SDHCI_S5P
				619	bool "SDHCI support on Samsung S5P SoC"
				620	depends on MMC_SDHCI
				621	help
				622	This selects the Secure Digital Host Controller Interface (SDHCI)
				623	on Samsung S5P SoCs.
				624
				625	If you have a controller with this interface, say Y here.
				626
				627	If unsure, say N.
				628
				629	config MMC_SDHCI_SPEAR
				630	bool "SDHCI support on ST SPEAr platform"
				631	depends on MMC_SDHCI
				632	help
				633	This selects the Secure Digital Host Controller Interface (SDHCI)
				634	often referrered to as the HSMMC block in some of the ST SPEAR range
				635	of SoC
				636
				637	If you have a controller with this interface, say Y here.
				638
				639	If unsure, say N.
				640
Patrice Chotard	2eea7d8	2017-02-21 13:37:09 +0100	[diff] [blame]	641	config MMC_SDHCI_STI
				642	bool "SDHCI support for STMicroelectronics SoC"
Patrice Chotard	cdf6b57	2017-02-21 13:37:11 +0100	[diff] [blame]	643	depends on MMC_SDHCI && OF_CONTROL
Patrice Chotard	2eea7d8	2017-02-21 13:37:09 +0100	[diff] [blame]	644	help
				645	This selects the Secure Digital Host Controller Interface (SDHCI)
				646	on STMicroelectronics STiH410 SoC.
				647
Stefan Roese	121fc56	2016-12-09 15:03:28 +0100	[diff] [blame]	648	config MMC_SDHCI_XENON
				649	bool "SDHCI support for the Xenon SDHCI controller"
				650	depends on MMC_SDHCI && DM_MMC && OF_CONTROL
				651	help
				652	Support for Xenon SDHCI host controller on Marvell Armada 3700
				653	7k/8k ARM SoCs platforms
				654
				655	If you have a controller with this interface, say Y here.
				656
				657	If unsure, say N.
				658
Felipe Balbi	b756760	2017-02-20 14:24:14 +0300	[diff] [blame]	659	config MMC_SDHCI_TANGIER
				660	bool "Tangier SDHCI controller support"
				661	depends on DM_MMC && BLK
				662	depends on MMC_SDHCI
				663	help
				664	This selects support for SDHCI controller on Tanginer
				665	SoC. Note that this controller does not sit on PCI bus and,
				666	hence, cannot be enumerated by standard PCI means.
				667
				668	If you're using an Intel Tangier SoC (available on Intel
				669	Edison board), say Y here.
				670
				671	If unsure, say N.
				672
Masahiro Yamada	b2c8868	2017-01-10 13:32:07 +0900	[diff] [blame]	673	config MMC_SDHCI_TEGRA
				674	bool "SDHCI platform support for the Tegra SD/MMC Controller"
Trevor Woerner	513f640	2020-05-06 08:02:41 -0400	[diff] [blame]	675	depends on ARCH_TEGRA
Philipp Tomsich	b302747	2018-11-30 22:13:25 +0100	[diff] [blame]	676	select BOUNCE_BUFFER
Masahiro Yamada	b2c8868	2017-01-10 13:32:07 +0900	[diff] [blame]	677	default y
				678	help
				679	This selects the Tegra SD/MMC controller. If you have a Tegra
				680	platform with SD or MMC devices, say Y here.
				681
				682	If unsure, say N.
				683
Trent Piepho	1bf56c3	2019-04-01 23:05:49 +0000	[diff] [blame]	684	config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
				685	bool "Disable external clock loopback"
				686	depends on MMC_SDHCI_TEGRA && TEGRA124
				687	help
				688	Disable the external clock loopback and use the internal one on SDMMC3
				689	as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
				690	being set to 0xfffd according to the TRM.
				691
				692	TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
				693	approach once proper kernel integration made it mainline.
				694
Masahiro Yamada	168c57d	2017-01-30 19:46:51 +0900	[diff] [blame]	695	config MMC_SDHCI_ZYNQ
				696	bool "Arasan SDHCI controller support"
Simon Glass	eba48f9	2017-07-29 11:35:31 -0600	[diff] [blame]	697	depends on DM_MMC && OF_CONTROL && BLK
Masahiro Yamada	168c57d	2017-01-30 19:46:51 +0900	[diff] [blame]	698	depends on MMC_SDHCI
				699	help
				700	Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
				701
Vipul Kumar	6254800	2018-02-28 15:53:28 +0530	[diff] [blame]	702	config ZYNQ_SDHCI_MAX_FREQ
				703	int "Set the maximum frequency of the controller"
				704	depends on MMC_SDHCI_ZYNQ
				705	help
				706	Set the maximum frequency of the controller.
				707
Vipul Kumar	dcc14e3	2018-02-28 15:53:29 +0530	[diff] [blame]	708	config ZYNQ_SDHCI_MIN_FREQ
				709	int "Set the minimum frequency of the controller"
				710	depends on MMC_SDHCI_ZYNQ
				711	default 0
				712	help
				713	Set the minimum frequency of the controller.
				714
Siva Durga Prasad Paladugu	a9a3d00	2019-05-27 14:33:14 +0530	[diff] [blame]	715	config ZYNQ_HISPD_BROKEN
				716	bool "High speed broken for Zynq SDHCI controller"
				717	depends on MMC_SDHCI_ZYNQ
				718	help
				719	Set if high speed mode is broken.
				720
Masahiro Yamada	b2c8868	2017-01-10 13:32:07 +0900	[diff] [blame]	721	config MMC_SUNXI
				722	bool "Allwinner sunxi SD/MMC Host Controller support"
Masahiro Yamada	41ff529	2017-01-12 12:16:15 +0900	[diff] [blame]	723	depends on ARCH_SUNXI && !UART0_PORT_F
Masahiro Yamada	b2c8868	2017-01-10 13:32:07 +0900	[diff] [blame]	724	default y
				725	help
				726	This selects support for the SD/MMC Host Controller on
				727	Allwinner sunxi SoCs.
				728
Maxime Ripard	95e3470	2017-08-23 12:03:41 +0200	[diff] [blame]	729	config MMC_SUNXI_HAS_NEW_MODE
				730	bool
				731	depends on MMC_SUNXI
				732
Vasily Khoruzhick	b198e2c	2018-11-09 20:41:44 -0800	[diff] [blame]	733	config MMC_SUNXI_HAS_MODE_SWITCH
				734	bool
				735	depends on MMC_SUNXI
				736
Tianrui Wei	8cfc7c5	2021-07-01 12:54:20 +0800	[diff] [blame]	737	config MMC_PITON
				738	bool "MMC support for OpenPiton SoC"
				739	depends on DM_MMC && BLK
				740	help
				741	This selects support for the SD host controller on OpenPiton SoC.
				742	Note that this SD controller directly exposes the contents of the
				743	SD card as memory mapped, so there is no manual configuration
				744	required
				745
Wenyou Yang	7a7a64c	2017-04-13 10:29:22 +0800	[diff] [blame]	746	config GENERIC_ATMEL_MCI
				747	bool "Atmel Multimedia Card Interface support"
Simon Glass	eba48f9	2017-07-29 11:35:31 -0600	[diff] [blame]	748	depends on DM_MMC && BLK && ARCH_AT91
Wenyou Yang	7a7a64c	2017-04-13 10:29:22 +0800	[diff] [blame]	749	help
				750	This enables support for Atmel High Speed Multimedia Card Interface
				751	(HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
				752	the SD Memory Card Specification V2.0, the SDIO V2.0 specification
				753	and CE-ATA V1.1.
				754
Patrice Chotard	ae19b81	2017-09-04 17:56:22 +0200	[diff] [blame]	755	config STM32_SDMMC2
				756	bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
Patrice Chotard	4cb0ac9	2017-10-03 15:54:58 +0200	[diff] [blame]	757	depends on DM_MMC && BLK && OF_CONTROL
Patrice Chotard	ae19b81	2017-09-04 17:56:22 +0200	[diff] [blame]	758	help
				759	This selects support for the SD/MMC controller on STM32H7 SoCs.
				760	If you have a board based on such a SoC and with a SD/MMC slot,
				761	say Y or M here.
				762
Rick Chen	cbb5297	2017-11-14 14:47:09 +0800	[diff] [blame]	763	config FTSDC010
				764	bool "Ftsdc010 SD/MMC controller Support"
				765	help
				766	This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
				767
Rick Chen	c59a6fb	2018-03-20 15:10:49 +0800	[diff] [blame]	768	config FTSDC010_SDIO
				769	bool "Support ftsdc010 sdio"
Rick Chen	c59a6fb	2018-03-20 15:10:49 +0800	[diff] [blame]	770	depends on FTSDC010
				771	help
				772	This can enable ftsdc010 sdio function.
				773
developer	dc5a9aa	2018-11-15 10:08:04 +0800	[diff] [blame]	774	config MMC_MTK
				775	bool "MediaTek SD/MMC Card Interface support"
developer	607faf7	2019-09-25 17:45:37 +0800	[diff] [blame]	776	depends on ARCH_MEDIATEK \|\| ARCH_MTMIPS
developer	dc5a9aa	2018-11-15 10:08:04 +0800	[diff] [blame]	777	depends on BLK && DM_MMC
				778	depends on OF_CONTROL
				779	help
				780	This selects the MediaTek(R) Secure digital and Multimedia card Interface.
				781	If you have a machine with a integrated SD/MMC card reader, say Y or M here.
				782	This is needed if support for any SD/SDIO/MMC devices is required.
				783	If unsure, say N.
				784
Masahiro Yamada	e8b9972	2016-12-07 22:10:27 +0900	[diff] [blame]	785	endif
				786
Mario Six	41d7d97	2018-03-28 14:38:19 +0200	[diff] [blame]	787	config FSL_ESDHC
				788	bool "Freescale/NXP eSDHC controller support"
				789	help
Yangbo Lu	982f425	2019-06-21 11:42:27 +0800	[diff] [blame]	790	This selects support for the eSDHC (Enhanced Secure Digital Host
				791	Controller) found on numerous Freescale/NXP SoCs.
				792
Michael Walle	081d401	2020-10-12 10:07:14 +0200	[diff] [blame]	793	config FSL_ESDHC_SUPPORT_ADMA2
				794	bool "enable ADMA2 support"
				795	depends on FSL_ESDHC
				796	select MMC_SDHCI_ADMA_HELPERS
				797	help
				798	This enables support for the ADMA2 transfer mode. If supported by the
				799	eSDHC it will allow 64bit DMA addresses.
				800
Yangbo Lu	ce88402	2020-05-19 11:06:44 +0800	[diff] [blame]	801	config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
				802	bool "enable eSDHC workaround for 3.3v IO reliability issue"
				803	depends on FSL_ESDHC && DM_MMC
Yangbo Lu	ce88402	2020-05-19 11:06:44 +0800	[diff] [blame]	804	help
				805	When eSDHC operates at 3.3v, damage can accumulate in an internal
				806	level shifter at a higher than expected rate. The faster the interface
				807	runs, the more damage accumulates. This issue now is found on LX2160A
				808	eSDHC1 for only SD card. The hardware workaround is recommended to use
				809	an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card
				810	side. For boards without hardware workaround, this option could be
				811	enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card.
				812	This option assumes no hotplug, and u-boot has to make all the way to
				813	to linux to use 1.8v UHS-I speed mode if has card.
				814
Yangbo Lu	e087cd6	2021-06-03 10:51:17 +0800	[diff] [blame]	815	config FSL_ESDHC_VS33_NOT_SUPPORT
				816	bool "3.3V power supply not supported"
				817	depends on FSL_ESDHC
				818	help
				819	For eSDHC, power supply is through peripheral circuit. 3.3V support is
				820	common. Select this if 3.3V power supply not supported.
				821
Yangbo Lu	982f425	2019-06-21 11:42:27 +0800	[diff] [blame]	822	config FSL_ESDHC_IMX
				823	bool "Freescale/NXP i.MX eSDHC controller support"
				824	help
				825	This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
				826	Controller) found on numerous Freescale/NXP SoCs.
Mario Six	41d7d97	2018-03-28 14:38:19 +0200	[diff] [blame]	827
Adam Ford	0183658	2019-08-14 07:23:43 -0500	[diff] [blame]	828	config FSL_USDHC
				829	bool "Freescale/NXP i.MX uSDHC controller support"
Peng Fan	82d8558	2021-08-07 16:00:46 +0800	[diff] [blame]	830	depends on MX6 \|\| MX7 \|\|ARCH_MX7ULP \|\| IMX8 \|\| IMX8M \|\| IMX8ULP \|\| IMXRT
Adam Ford	0183658	2019-08-14 07:23:43 -0500	[diff] [blame]	831	select FSL_ESDHC_IMX
				832	help
				833	This enables the Ultra Secured Digital Host Controller enhancements
				834
Nobuhiro Iwamatsu	3ec5f86	2014-12-17 08:03:00 +0900	[diff] [blame]	835	endmenu
York Sun	097e360	2016-12-28 08:43:42 -0800	[diff] [blame]	836
				837	config SYS_FSL_ERRATUM_ESDHC111
				838	bool
				839
				840	config SYS_FSL_ERRATUM_ESDHC13
				841	bool
				842
				843	config SYS_FSL_ERRATUM_ESDHC135
				844	bool
				845
				846	config SYS_FSL_ERRATUM_ESDHC_A001
				847	bool
Michael Walle	148dc61	2021-03-17 15:01:36 +0100	[diff] [blame]	848
				849	config SYS_FSL_ERRATUM_A011334
				850	bool
Michael Walle	7259dc5	2021-03-17 15:01:37 +0100	[diff] [blame]	851
				852	config SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
				853	bool