Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 93743d241c64bc1f7ecbf3262d1683176551e11f / . / src / arm64 / qcom / sm8550-mtp.dts
blob: c1135ad5fa696f5b2eb81a77819d9d55a23cbd70 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2022, Linaro Limited
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9#include "sm8550.dtsi"
10#include "pm8010.dtsi"
11#include "pm8550.dtsi"
12#include "pm8550b.dtsi"
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame^]13#define PMK8550VE_SID 5
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]14#include "pm8550ve.dtsi"
15#include "pm8550vs.dtsi"
16#include "pmk8550.dtsi"
17#include "pmr735d_a.dtsi"
18#include "pmr735d_b.dtsi"
19
20/ {
21 model = "Qualcomm Technologies, Inc. SM8550 MTP";
22 compatible = "qcom,sm8550-mtp", "qcom,sm8550";
23 chassis-type = "handset";
24
25 aliases {
26 serial0 = &uart7;
27 };
28
29 wcd938x: audio-codec {
30 compatible = "qcom,wcd9385-codec";
31
32 pinctrl-names = "default";
33 pinctrl-0 = <&wcd_default>;
34
35 qcom,micbias1-microvolt = <1800000>;
36 qcom,micbias2-microvolt = <1800000>;
37 qcom,micbias3-microvolt = <1800000>;
38 qcom,micbias4-microvolt = <1800000>;
39 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
40 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
41 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
42 qcom,rx-device = <&wcd_rx>;
43 qcom,tx-device = <&wcd_tx>;
44
45 reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
46
47 vdd-buck-supply = <&vreg_l15b_1p8>;
48 vdd-rxtx-supply = <&vreg_l15b_1p8>;
49 vdd-io-supply = <&vreg_l15b_1p8>;
50 vdd-mic-bias-supply = <&vreg_bob1>;
51
52 #sound-dai-cells = <1>;
53 };
54
55 chosen {
56 stdout-path = "serial0:115200n8";
57 };
58
59 pmic-glink {
60 compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
61 #address-cells = <1>;
62 #size-cells = <0>;
63 orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
64
65 connector@0 {
66 compatible = "usb-c-connector";
67 reg = <0>;
68 power-role = "dual";
69 data-role = "dual";
70
71 ports {
72 #address-cells = <1>;
73 #size-cells = <0>;
74
75 port@0 {
76 reg = <0>;
77
78 pmic_glink_hs_in: endpoint {
79 remote-endpoint = <&usb_1_dwc3_hs>;
80 };
81 };
82
83 port@1 {
84 reg = <1>;
85
86 pmic_glink_ss_in: endpoint {
87 remote-endpoint = <&usb_dp_qmpphy_out>;
88 };
89 };
90
91 port@2 {
92 reg = <2>;
93
94 pmic_glink_sbu: endpoint {
95 remote-endpoint = <&fsa4480_sbu_mux>;
96 };
97 };
98 };
99 };
100 };
101
102 sound {
103 compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
104 model = "SM8550-MTP";
105 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
106 "SpkrRight IN", "WSA_SPK2 OUT",
107 "IN1_HPHL", "HPHL_OUT",
108 "IN2_HPHR", "HPHR_OUT",
109 "AMIC2", "MIC BIAS2",
110 "VA DMIC0", "MIC BIAS1",
111 "VA DMIC1", "MIC BIAS1",
112 "VA DMIC2", "MIC BIAS3",
113 "TX DMIC0", "MIC BIAS1",
114 "TX DMIC1", "MIC BIAS2",
115 "TX DMIC2", "MIC BIAS3",
116 "TX SWR_ADC1", "ADC2_OUTPUT";
117
118 wcd-playback-dai-link {
119 link-name = "WCD Playback";
120
121 cpu {
122 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
123 };
124
125 codec {
126 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
127 };
128
129 platform {
130 sound-dai = <&q6apm>;
131 };
132 };
133
134 wcd-capture-dai-link {
135 link-name = "WCD Capture";
136
137 cpu {
138 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
139 };
140
141 codec {
142 sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
143 };
144
145 platform {
146 sound-dai = <&q6apm>;
147 };
148 };
149
150 wsa-dai-link {
151 link-name = "WSA Playback";
152
153 cpu {
154 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
155 };
156
157 codec {
158 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
159 };
160
161 platform {
162 sound-dai = <&q6apm>;
163 };
164 };
165
166 va-dai-link {
167 link-name = "VA Capture";
168
169 cpu {
170 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
171 };
172
173 codec {
174 sound-dai = <&lpass_vamacro 0>;
175 };
176
177 platform {
178 sound-dai = <&q6apm>;
179 };
180 };
181 };
182
183 vph_pwr: vph-pwr-regulator {
184 compatible = "regulator-fixed";
185 regulator-name = "vph_pwr";
186 regulator-min-microvolt = <3700000>;
187 regulator-max-microvolt = <3700000>;
188
189 regulator-always-on;
190 regulator-boot-on;
191 };
192};
193
194&apps_rsc {
195 regulators-0 {
196 compatible = "qcom,pm8550-rpmh-regulators";
197 qcom,pmic-id = "b";
198
199 vdd-bob1-supply = <&vph_pwr>;
200 vdd-bob2-supply = <&vph_pwr>;
201 vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>;
202 vdd-l2-l13-l14-supply = <&vreg_bob1>;
203 vdd-l3-supply = <&vreg_s4g_1p3>;
204 vdd-l5-l16-supply = <&vreg_bob1>;
205 vdd-l6-l7-supply = <&vreg_bob1>;
206 vdd-l8-l9-supply = <&vreg_bob1>;
207 vdd-l11-supply = <&vreg_s4g_1p3>;
208 vdd-l12-supply = <&vreg_s6g_1p8>;
209 vdd-l15-supply = <&vreg_s6g_1p8>;
210 vdd-l17-supply = <&vreg_bob2>;
211
212 vreg_bob1: bob1 {
213 regulator-name = "vreg_bob1";
214 regulator-min-microvolt = <3296000>;
215 regulator-max-microvolt = <3960000>;
216 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
217 };
218
219 vreg_bob2: bob2 {
220 regulator-name = "vreg_bob2";
221 regulator-min-microvolt = <2720000>;
222 regulator-max-microvolt = <3960000>;
223 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
224 };
225
226 vreg_l1b_1p8: ldo1 {
227 regulator-name = "vreg_l1b_1p8";
228 regulator-min-microvolt = <1800000>;
229 regulator-max-microvolt = <1800000>;
230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
231 };
232
233 vreg_l2b_3p0: ldo2 {
234 regulator-name = "vreg_l2b_3p0";
235 regulator-min-microvolt = <3008000>;
236 regulator-max-microvolt = <3008000>;
237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238 };
239
240 vreg_l5b_3p1: ldo5 {
241 regulator-name = "vreg_l5b_3p1";
242 regulator-min-microvolt = <3104000>;
243 regulator-max-microvolt = <3104000>;
244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245 };
246
247 vreg_l6b_1p8: ldo6 {
248 regulator-name = "vreg_l6b_1p8";
249 regulator-min-microvolt = <1800000>;
250 regulator-max-microvolt = <3008000>;
251 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
252 };
253
254 vreg_l7b_1p8: ldo7 {
255 regulator-name = "vreg_l7b_1p8";
256 regulator-min-microvolt = <1800000>;
257 regulator-max-microvolt = <3008000>;
258 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
259 };
260
261 vreg_l8b_1p8: ldo8 {
262 regulator-name = "vreg_l8b_1p8";
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <3008000>;
265 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
266 };
267
268 vreg_l9b_2p9: ldo9 {
269 regulator-name = "vreg_l9b_2p9";
270 regulator-min-microvolt = <2960000>;
271 regulator-max-microvolt = <3008000>;
272 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
273 };
274
275 vreg_l11b_1p2: ldo11 {
276 regulator-name = "vreg_l11b_1p2";
277 regulator-min-microvolt = <1200000>;
278 regulator-max-microvolt = <1504000>;
279 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
280 };
281
282 vreg_l12b_1p8: ldo12 {
283 regulator-name = "vreg_l12b_1p8";
284 regulator-min-microvolt = <1800000>;
285 regulator-max-microvolt = <1800000>;
286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 };
288
289 vreg_l13b_3p0: ldo13 {
290 regulator-name = "vreg_l13b_3p0";
291 regulator-min-microvolt = <3000000>;
292 regulator-max-microvolt = <3000000>;
293 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
294 };
295
296 vreg_l14b_3p2: ldo14 {
297 regulator-name = "vreg_l14b_3p2";
298 regulator-min-microvolt = <3200000>;
299 regulator-max-microvolt = <3200000>;
300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 };
302
303 vreg_l15b_1p8: ldo15 {
304 regulator-name = "vreg_l15b_1p8";
305 regulator-min-microvolt = <1800000>;
306 regulator-max-microvolt = <1800000>;
307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 };
309
310 vreg_l16b_2p8: ldo16 {
311 regulator-name = "vreg_l16b_2p8";
312 regulator-min-microvolt = <2800000>;
313 regulator-max-microvolt = <2800000>;
314 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315 };
316
317 vreg_l17b_2p5: ldo17 {
318 regulator-name = "vreg_l17b_2p5";
319 regulator-min-microvolt = <2504000>;
320 regulator-max-microvolt = <2504000>;
321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
322 };
323 };
324
325 regulators-1 {
326 compatible = "qcom,pm8550vs-rpmh-regulators";
327 qcom,pmic-id = "c";
328
329 vdd-l3-supply = <&vreg_s4e_0p9>;
330
331 vreg_l3c_0p91: ldo3 {
332 regulator-name = "vreg_l3c_0p9";
333 regulator-min-microvolt = <880000>;
334 regulator-max-microvolt = <912000>;
335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 };
337 };
338
339 regulators-2 {
340 compatible = "qcom,pm8550vs-rpmh-regulators";
341 qcom,pmic-id = "d";
342
343 vdd-l1-supply = <&vreg_s4e_0p9>;
344
345 vreg_l1d_0p88: ldo1 {
346 regulator-name = "vreg_l1d_0p88";
347 regulator-min-microvolt = <880000>;
348 regulator-max-microvolt = <920000>;
349 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
350 };
351 };
352
353 regulators-3 {
354 compatible = "qcom,pm8550vs-rpmh-regulators";
355 qcom,pmic-id = "e";
356
357 vdd-l1-supply = <&vreg_s4e_0p9>;
358 vdd-l2-supply = <&vreg_s4e_0p9>;
359 vdd-l3-supply = <&vreg_s4g_1p3>;
360 vdd-s4-supply = <&vph_pwr>;
361 vdd-s5-supply = <&vph_pwr>;
362
363 vreg_s4e_0p9: smps4 {
364 regulator-name = "vreg_s4e_0p9";
365 regulator-min-microvolt = <904000>;
366 regulator-max-microvolt = <984000>;
367 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
368 };
369
370 vreg_s5e_1p1: smps5 {
371 regulator-name = "vreg_s5e_1p1";
372 regulator-min-microvolt = <1080000>;
373 regulator-max-microvolt = <1120000>;
374 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
375 };
376
377 vreg_l1e_0p88: ldo1 {
378 regulator-name = "vreg_l1e_0p88";
379 regulator-min-microvolt = <880000>;
380 regulator-max-microvolt = <880000>;
381 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
382 };
383
384 vreg_l2e_0p9: ldo2 {
385 regulator-name = "vreg_l2e_0p9";
386 regulator-min-microvolt = <904000>;
387 regulator-max-microvolt = <970000>;
388 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
389 };
390
391 vreg_l3e_1p2: ldo3 {
392 regulator-name = "vreg_l3e_1p2";
393 regulator-min-microvolt = <1200000>;
394 regulator-max-microvolt = <1200000>;
395 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
396 };
397 };
398
399 regulators-4 {
400 compatible = "qcom,pm8550ve-rpmh-regulators";
401 qcom,pmic-id = "f";
402
403 vdd-l1-supply = <&vreg_s4e_0p9>;
404 vdd-l2-supply = <&vreg_s4e_0p9>;
405 vdd-l3-supply = <&vreg_s4e_0p9>;
406 vdd-s4-supply = <&vph_pwr>;
407
408 vreg_s4f_0p5: smps4 {
409 regulator-name = "vreg_s4f_0p5";
410 regulator-min-microvolt = <500000>;
411 regulator-max-microvolt = <700000>;
412 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
413 };
414
415 vreg_l1f_0p9: ldo1 {
416 regulator-name = "vreg_l1f_0p9";
417 regulator-min-microvolt = <912000>;
418 regulator-max-microvolt = <912000>;
419 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
420 };
421
422 vreg_l2f_0p88: ldo2 {
423 regulator-name = "vreg_l2f_0p88";
424 regulator-min-microvolt = <880000>;
425 regulator-max-microvolt = <912000>;
426 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
427 };
428
429 vreg_l3f_0p91: ldo3 {
430 regulator-name = "vreg_l3f_0p91";
431 regulator-min-microvolt = <880000>;
432 regulator-max-microvolt = <912000>;
433 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
434 };
435 };
436
437 regulators-5 {
438 compatible = "qcom,pm8550vs-rpmh-regulators";
439 qcom,pmic-id = "g";
440
441 vdd-l1-supply = <&vreg_s4g_1p3>;
442 vdd-l2-supply = <&vreg_s4g_1p3>;
443 vdd-l3-supply = <&vreg_s4g_1p3>;
444 vdd-s1-supply = <&vph_pwr>;
445 vdd-s2-supply = <&vph_pwr>;
446 vdd-s3-supply = <&vph_pwr>;
447 vdd-s4-supply = <&vph_pwr>;
448 vdd-s5-supply = <&vph_pwr>;
449 vdd-s6-supply = <&vph_pwr>;
450
451 vreg_s1g_1p2: smps1 {
452 regulator-name = "vreg_s1g_1p2";
453 regulator-min-microvolt = <1200000>;
454 regulator-max-microvolt = <1300000>;
455 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
456 };
457
458 vreg_s2g_0p8: smps2 {
459 regulator-name = "vreg_s2g_0p8";
460 regulator-min-microvolt = <800000>;
461 regulator-max-microvolt = <1000000>;
462 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
463 };
464
465 vreg_s3g_0p7: smps3 {
466 regulator-name = "vreg_s3g_0p7";
467 regulator-min-microvolt = <300000>;
468 regulator-max-microvolt = <1004000>;
469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
470 };
471
472 vreg_s4g_1p3: smps4 {
473 regulator-name = "vreg_s4g_1p3";
474 regulator-min-microvolt = <1200000>;
475 regulator-max-microvolt = <1352000>;
476 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
477 };
478
479 vreg_s5g_0p8: smps5 {
480 regulator-name = "vreg_s5g_0p8";
481 regulator-min-microvolt = <500000>;
482 regulator-max-microvolt = <1004000>;
483 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
484 };
485
486 vreg_s6g_1p8: smps6 {
487 regulator-name = "vreg_s6g_1p8";
488 regulator-min-microvolt = <1800000>;
489 regulator-max-microvolt = <2000000>;
490 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
491 };
492
493 vreg_l1g_1p2: ldo1 {
494 regulator-name = "vreg_l1g_1p2";
495 regulator-min-microvolt = <1200000>;
496 regulator-max-microvolt = <1200000>;
497 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
498 };
499
500 vreg_l2g_1p2: ldo2 {
501 regulator-name = "vreg_l2g_1p2";
502 regulator-min-microvolt = <1200000>;
503 regulator-max-microvolt = <1200000>;
504 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
505 };
506
507 vreg_l3g_1p2: ldo3 {
508 regulator-name = "vreg_l3g_1p2";
509 regulator-min-microvolt = <1200000>;
510 regulator-max-microvolt = <1200000>;
511 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
512 };
513 };
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame^]514
515 regulators-6 {
516 compatible = "qcom,pm8010-rpmh-regulators";
517 qcom,pmic-id = "m";
518
519 vdd-l1-l2-supply = <&vreg_s4g_1p3>;
520 vdd-l3-l4-supply = <&vreg_bob2>;
521 vdd-l5-supply = <&vreg_s6g_1p8>;
522 vdd-l6-supply = <&vreg_s6g_1p8>;
523 vdd-l7-supply = <&vreg_bob1>;
524
525 vreg_l1m_1p056: ldo1 {
526 regulator-name = "vreg_l1m_1p056";
527 regulator-min-microvolt = <1056000>;
528 regulator-max-microvolt = <1056000>;
529 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
530 };
531
532 vreg_l2m_1p056: ldo2 {
533 regulator-name = "vreg_l2m_1p056";
534 regulator-min-microvolt = <1056000>;
535 regulator-max-microvolt = <1056000>;
536 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
537 };
538
539 vreg_l3m_2p8: ldo3 {
540 regulator-name = "vreg_l3m_2p8";
541 regulator-min-microvolt = <2800000>;
542 regulator-max-microvolt = <2800000>;
543 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
544 };
545
546 vreg_l4m_2p8: ldo4 {
547 regulator-name = "vreg_l4m_2p8";
548 regulator-min-microvolt = <2800000>;
549 regulator-max-microvolt = <2800000>;
550 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
551 };
552
553 vreg_l5m_1p8: ldo5 {
554 regulator-name = "vreg_l5m_1p8";
555 regulator-min-microvolt = <1800000>;
556 regulator-max-microvolt = <1800000>;
557 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
558 };
559
560 vreg_l6m_1p8: ldo6 {
561 regulator-name = "vreg_l6m_1p8";
562 regulator-min-microvolt = <1800000>;
563 regulator-max-microvolt = <1800000>;
564 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
565 };
566
567 vreg_l7m_2p9: ldo7 {
568 regulator-name = "vreg_l7m_2p9";
569 regulator-min-microvolt = <2800000>;
570 regulator-max-microvolt = <2904000>;
571 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
572 };
573 };
574
575 regulators-7 {
576 compatible = "qcom,pm8010-rpmh-regulators";
577 qcom,pmic-id = "n";
578
579 vdd-l1-l2-supply = <&vreg_s4g_1p3>;
580 vdd-l3-l4-supply = <&vreg_bob2>;
581 vdd-l5-supply = <&vreg_s6g_1p8>;
582 vdd-l6-supply = <&vreg_bob1>;
583 vdd-l7-supply = <&vreg_bob1>;
584
585 vreg_l1n_1p1: ldo1 {
586 regulator-name = "vreg_l1n_1p1";
587 regulator-min-microvolt = <1104000>;
588 regulator-max-microvolt = <1200000>;
589 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
590 };
591
592 vreg_l2n_1p1: ldo2 {
593 regulator-name = "vreg_l2n_1p1";
594 regulator-min-microvolt = <1104000>;
595 regulator-max-microvolt = <1200000>;
596 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
597 };
598
599 vreg_l3n_2p8: ldo3 {
600 regulator-name = "vreg_l3n_2p8";
601 regulator-min-microvolt = <2800000>;
602 regulator-max-microvolt = <3000000>;
603 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
604 };
605
606 vreg_l4n_2p8: ldo4 {
607 regulator-name = "vreg_l4n_2p8";
608 regulator-min-microvolt = <2800000>;
609 regulator-max-microvolt = <3300000>;
610 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
611 };
612
613 vreg_l5n_1p8: ldo5 {
614 regulator-name = "vreg_l5n_1p8";
615 regulator-min-microvolt = <1800000>;
616 regulator-max-microvolt = <1800000>;
617 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
618 };
619
620 vreg_l6n_3p3: ldo6 {
621 regulator-name = "vreg_l6n_3p3";
622 regulator-min-microvolt = <2800000>;
623 regulator-max-microvolt = <3304000>;
624 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
625 };
626
627 vreg_l7n_2p96: ldo7 {
628 regulator-name = "vreg_l7n_2p96";
629 regulator-min-microvolt = <2800000>;
630 regulator-max-microvolt = <2960000>;
631 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
632 };
633 };
634};
635
636&gpu {
637 status = "okay";
638
639 zap-shader {
640 firmware-name = "qcom/sm8550/a740_zap.mbn";
641 };
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]642};
643
644&i2c_master_hub_0 {
645 status = "okay";
646};
647
648&i2c_hub_2 {
649 status = "okay";
650
651 typec-mux@42 {
652 compatible = "fcs,fsa4480";
653 reg = <0x42>;
654
655 vcc-supply = <&vreg_bob1>;
656
657 mode-switch;
658 orientation-switch;
659
660 port {
661 fsa4480_sbu_mux: endpoint {
662 remote-endpoint = <&pmic_glink_sbu>;
663 };
664 };
665 };
666};
667
668&lpass_tlmm {
669 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
670 pins = "gpio17";
671 function = "gpio";
672 drive-strength = <16>;
673 bias-disable;
674 output-low;
675 };
676
677 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
678 pins = "gpio18";
679 function = "gpio";
680 drive-strength = <16>;
681 bias-disable;
682 output-low;
683 };
684};
685
686&mdss {
687 status = "okay";
688};
689
690&mdss_dsi0 {
691 vdda-supply = <&vreg_l3e_1p2>;
692 status = "okay";
693
694 panel@0 {
695 compatible = "visionox,vtdr6130";
696 reg = <0>;
697
698 pinctrl-names = "default", "sleep";
699 pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
700 pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
701
702 vddio-supply = <&vreg_l12b_1p8>;
703 vci-supply = <&vreg_l13b_3p0>;
704 vdd-supply = <&vreg_l11b_1p2>;
705
706 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
707
708 port {
709 panel0_in: endpoint {
710 remote-endpoint = <&mdss_dsi0_out>;
711 };
712 };
713 };
714};
715
716&mdss_dsi0_out {
717 remote-endpoint = <&panel0_in>;
718 data-lanes = <0 1 2 3>;
719};
720
721&mdss_dsi0_phy {
722 vdds-supply = <&vreg_l1e_0p88>;
723 status = "okay";
724};
725
726&mdss_dp0 {
727 status = "okay";
728};
729
730&mdss_dp0_out {
731 data-lanes = <0 1>;
732 remote-endpoint = <&usb_dp_qmpphy_dp_in>;
733};
734
735&pcie_1_phy_aux_clk {
736 clock-frequency = <1000>;
737};
738
739&pcie0 {
740 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
741 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
742
743 pinctrl-names = "default";
744 pinctrl-0 = <&pcie0_default_state>;
745
746 status = "okay";
747};
748
749&pcie0_phy {
750 vdda-phy-supply = <&vreg_l1e_0p88>;
751 vdda-pll-supply = <&vreg_l3e_1p2>;
752
753 status = "okay";
754};
755
756&pcie1 {
757 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
758 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
759
760 pinctrl-names = "default";
761 pinctrl-0 = <&pcie1_default_state>;
762
763 status = "okay";
764};
765
766&pcie1_phy {
767 vdda-phy-supply = <&vreg_l3c_0p91>;
768 vdda-pll-supply = <&vreg_l3e_1p2>;
769 vdda-qref-supply = <&vreg_l1e_0p88>;
770
771 status = "okay";
772};
773
774&pm8550_gpios {
775 sdc2_card_det_n: sdc2-card-det-state {
776 pins = "gpio12";
777 function = "normal";
778 input-enable;
779 output-disable;
780 bias-pull-up;
781 power-source = <1>; /* 1.8 V */
782 };
783};
784
785&pm8550b_eusb2_repeater {
786 vdd18-supply = <&vreg_l15b_1p8>;
787 vdd3-supply = <&vreg_l5b_3p1>;
788};
789
790&qupv3_id_0 {
791 status = "okay";
792};
793
794&remoteproc_adsp {
795 firmware-name = "qcom/sm8550/adsp.mbn",
796 "qcom/sm8550/adsp_dtb.mbn";
797 status = "okay";
798};
799
800&remoteproc_cdsp {
801 firmware-name = "qcom/sm8550/cdsp.mbn",
802 "qcom/sm8550/cdsp_dtb.mbn";
803 status = "okay";
804};
805
806&remoteproc_mpss {
807 firmware-name = "qcom/sm8550/modem.mbn",
808 "qcom/sm8550/modem_dtb.mbn";
809 status = "okay";
810};
811
812&sdhc_2 {
813 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
814 pinctrl-names = "default", "sleep";
815 pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
816 pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
817 vmmc-supply = <&vreg_l9b_2p9>;
818 vqmmc-supply = <&vreg_l8b_1p8>;
819 bus-width = <4>;
820 no-sdio;
821 no-mmc;
822 status = "okay";
823};
824
825&sleep_clk {
826 clock-frequency = <32000>;
827};
828
829&swr0 {
830 status = "okay";
831
832 /* WSA8845 */
833 left_spkr: speaker@0,0 {
834 compatible = "sdw20217020400";
835 reg = <0 0>;
836 pinctrl-names = "default";
837 pinctrl-0 = <&spkr_1_sd_n_active>;
838 powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
839 #sound-dai-cells = <0>;
840 sound-name-prefix = "SpkrLeft";
841 vdd-1p8-supply = <&vreg_l15b_1p8>;
842 vdd-io-supply = <&vreg_l3g_1p2>;
843 };
844
845 /* WSA8845 */
846 right_spkr: speaker@0,1 {
847 compatible = "sdw20217020400";
848 reg = <0 1>;
849 pinctrl-names = "default";
850 pinctrl-0 = <&spkr_2_sd_n_active>;
851 powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
852 #sound-dai-cells = <0>;
853 sound-name-prefix = "SpkrRight";
854 vdd-1p8-supply = <&vreg_l15b_1p8>;
855 vdd-io-supply = <&vreg_l3g_1p2>;
856 };
857};
858
859&swr1 {
860 status = "okay";
861
862 /* WCD9385 RX */
863 wcd_rx: codec@0,4 {
864 compatible = "sdw20217010d00";
865 reg = <0 4>;
866 qcom,rx-port-mapping = <1 2 3 4 5>;
867 };
868};
869
870&swr2 {
871 status = "okay";
872
873 /* WCD9385 TX */
874 wcd_tx: codec@0,3 {
875 compatible = "sdw20217010d00";
876 reg = <0 3>;
877 qcom,tx-port-mapping = <1 1 2 3>;
878 };
879};
880
881&tlmm {
882 gpio-reserved-ranges = <32 8>;
883
884 sde_dsi_active: sde-dsi-active-state {
885 pins = "gpio133";
886 function = "gpio";
887 drive-strength = <8>;
888 bias-disable;
889 };
890
891 sde_dsi_suspend: sde-dsi-suspend-state {
892 pins = "gpio133";
893 function = "gpio";
894 drive-strength = <2>;
895 bias-pull-down;
896 };
897
898 sde_te_active: sde-te-active-state {
899 pins = "gpio86";
900 function = "mdp_vsync";
901 drive-strength = <2>;
902 bias-pull-down;
903 };
904
905 sde_te_suspend: sde-te-suspend-state {
906 pins = "gpio86";
907 function = "mdp_vsync";
908 drive-strength = <2>;
909 bias-pull-down;
910 };
911
912 wcd_default: wcd-reset-n-active-state {
913 pins = "gpio108";
914 function = "gpio";
915 drive-strength = <16>;
916 bias-disable;
917 output-low;
918 };
919};
920
921&uart7 {
922 status = "okay";
923};
924
925&ufs_mem_hc {
926 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
927 vcc-supply = <&vreg_l17b_2p5>;
928 vcc-max-microamp = <1300000>;
929 vccq-supply = <&vreg_l1g_1p2>;
930 vccq-max-microamp = <1200000>;
931 vdd-hba-supply = <&vreg_l3g_1p2>;
932
933 status = "okay";
934};
935
936&ufs_mem_phy {
937 vdda-phy-supply = <&vreg_l1d_0p88>;
938 vdda-pll-supply = <&vreg_l3e_1p2>;
939
940 status = "okay";
941};
942
943&usb_1 {
944 status = "okay";
945};
946
947&usb_1_dwc3 {
948 dr_mode = "otg";
949 usb-role-switch;
950};
951
952&usb_1_dwc3_hs {
953 remote-endpoint = <&pmic_glink_hs_in>;
954};
955
956&usb_1_dwc3_ss {
957 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
958};
959
960&usb_1_hsphy {
961 vdd-supply = <&vreg_l1e_0p88>;
962 vdda12-supply = <&vreg_l3e_1p2>;
963
964 phys = <&pm8550b_eusb2_repeater>;
965
966 status = "okay";
967};
968
969&usb_dp_qmpphy {
970 vdda-phy-supply = <&vreg_l3e_1p2>;
971 vdda-pll-supply = <&vreg_l3f_0p91>;
972
973 orientation-switch;
974
975 status = "okay";
976};
977
978&usb_dp_qmpphy_dp_in {
979 remote-endpoint = <&mdss_dp0_out>;
980};
981
982&usb_dp_qmpphy_out {
983 remote-endpoint = <&pmic_glink_ss_in>;
984};
985
986&usb_dp_qmpphy_usb_ss_in {
987 remote-endpoint = <&usb_1_dwc3_ss>;
988};
989
990&xo_board {
991 clock-frequency = <76800000>;
992};