Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2015 Udoo |
| 4 | * Author: Tungyi Lin <tungyilin1127@gmail.com> |
| 5 | * Richard Hu <hakahu@gmail.com> |
| 6 | * Based on board/wandboard/spl.c |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 7 | */ |
| 8 | |
Simon Glass | 9758973 | 2020-05-10 11:40:02 -0600 | [diff] [blame] | 9 | #include <init.h> |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 10 | #include <asm/arch/clock.h> |
| 11 | #include <asm/arch/imx-regs.h> |
| 12 | #include <asm/arch/iomux.h> |
| 13 | #include <asm/arch/mx6-pins.h> |
Simon Glass | dbd7954 | 2020-05-10 11:40:11 -0600 | [diff] [blame] | 14 | #include <linux/delay.h> |
Masahiro Yamada | 56a931c | 2016-09-21 11:28:55 +0900 | [diff] [blame] | 15 | #include <linux/errno.h> |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 16 | #include <asm/gpio.h> |
Stefano Babic | 33731bc | 2017-06-29 10:16:06 +0200 | [diff] [blame] | 17 | #include <asm/mach-imx/iomux-v3.h> |
| 18 | #include <asm/mach-imx/video.h> |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 19 | #include <mmc.h> |
Yangbo Lu | 7334038 | 2019-06-21 11:42:28 +0800 | [diff] [blame] | 20 | #include <fsl_esdhc_imx.h> |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 21 | #include <asm/arch/crm_regs.h> |
| 22 | #include <asm/io.h> |
| 23 | #include <asm/arch/sys_proto.h> |
| 24 | #include <spl.h> |
| 25 | |
Simon Glass | 49c24a8 | 2024-09-29 19:49:47 -0600 | [diff] [blame] | 26 | #if defined(CONFIG_XPL_BUILD) |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 27 | #include <asm/arch/mx6-ddr.h> |
| 28 | |
| 29 | /* |
| 30 | * Driving strength: |
| 31 | * 0x30 == 40 Ohm |
| 32 | * 0x28 == 48 Ohm |
| 33 | */ |
| 34 | #define IMX6DQ_DRIVE_STRENGTH 0x30 |
| 35 | #define IMX6SDL_DRIVE_STRENGTH 0x28 |
| 36 | |
| 37 | /* configure MX6Q/DUAL mmdc DDR io registers */ |
| 38 | static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = { |
| 39 | .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH, |
| 40 | .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH, |
| 41 | .dram_cas = IMX6DQ_DRIVE_STRENGTH, |
| 42 | .dram_ras = IMX6DQ_DRIVE_STRENGTH, |
| 43 | .dram_reset = IMX6DQ_DRIVE_STRENGTH, |
| 44 | .dram_sdcke0 = IMX6DQ_DRIVE_STRENGTH, |
| 45 | .dram_sdcke1 = IMX6DQ_DRIVE_STRENGTH, |
| 46 | .dram_sdba2 = 0x00000000, |
| 47 | .dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH, |
| 48 | .dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH, |
| 49 | .dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH, |
| 50 | .dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH, |
| 51 | .dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH, |
| 52 | .dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH, |
| 53 | .dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH, |
| 54 | .dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH, |
| 55 | .dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH, |
| 56 | .dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH, |
| 57 | .dram_dqm0 = IMX6DQ_DRIVE_STRENGTH, |
| 58 | .dram_dqm1 = IMX6DQ_DRIVE_STRENGTH, |
| 59 | .dram_dqm2 = IMX6DQ_DRIVE_STRENGTH, |
| 60 | .dram_dqm3 = IMX6DQ_DRIVE_STRENGTH, |
| 61 | .dram_dqm4 = IMX6DQ_DRIVE_STRENGTH, |
| 62 | .dram_dqm5 = IMX6DQ_DRIVE_STRENGTH, |
| 63 | .dram_dqm6 = IMX6DQ_DRIVE_STRENGTH, |
| 64 | .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, |
| 65 | }; |
| 66 | |
| 67 | /* configure MX6Q/DUAL mmdc GRP io registers */ |
| 68 | static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = { |
| 69 | .grp_ddr_type = 0x000c0000, |
| 70 | .grp_ddrmode_ctl = 0x00020000, |
| 71 | .grp_ddrpke = 0x00000000, |
| 72 | .grp_addds = IMX6DQ_DRIVE_STRENGTH, |
| 73 | .grp_ctlds = IMX6DQ_DRIVE_STRENGTH, |
| 74 | .grp_ddrmode = 0x00020000, |
| 75 | .grp_b0ds = IMX6DQ_DRIVE_STRENGTH, |
| 76 | .grp_b1ds = IMX6DQ_DRIVE_STRENGTH, |
| 77 | .grp_b2ds = IMX6DQ_DRIVE_STRENGTH, |
| 78 | .grp_b3ds = IMX6DQ_DRIVE_STRENGTH, |
| 79 | .grp_b4ds = IMX6DQ_DRIVE_STRENGTH, |
| 80 | .grp_b5ds = IMX6DQ_DRIVE_STRENGTH, |
| 81 | .grp_b6ds = IMX6DQ_DRIVE_STRENGTH, |
| 82 | .grp_b7ds = IMX6DQ_DRIVE_STRENGTH, |
| 83 | }; |
| 84 | |
| 85 | /* configure MX6SOLO/DUALLITE mmdc DDR io registers */ |
| 86 | struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = { |
| 87 | .dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH, |
| 88 | .dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH, |
| 89 | .dram_cas = IMX6SDL_DRIVE_STRENGTH, |
| 90 | .dram_ras = IMX6SDL_DRIVE_STRENGTH, |
| 91 | .dram_reset = IMX6SDL_DRIVE_STRENGTH, |
| 92 | .dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH, |
| 93 | .dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH, |
| 94 | .dram_sdba2 = 0x00000000, |
| 95 | .dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH, |
| 96 | .dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH, |
| 97 | .dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH, |
| 98 | .dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH, |
| 99 | .dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH, |
| 100 | .dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH, |
| 101 | .dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH, |
| 102 | .dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH, |
| 103 | .dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH, |
| 104 | .dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH, |
| 105 | .dram_dqm0 = IMX6SDL_DRIVE_STRENGTH, |
| 106 | .dram_dqm1 = IMX6SDL_DRIVE_STRENGTH, |
| 107 | .dram_dqm2 = IMX6SDL_DRIVE_STRENGTH, |
| 108 | .dram_dqm3 = IMX6SDL_DRIVE_STRENGTH, |
| 109 | .dram_dqm4 = IMX6SDL_DRIVE_STRENGTH, |
| 110 | .dram_dqm5 = IMX6SDL_DRIVE_STRENGTH, |
| 111 | .dram_dqm6 = IMX6SDL_DRIVE_STRENGTH, |
| 112 | .dram_dqm7 = IMX6SDL_DRIVE_STRENGTH, |
| 113 | }; |
| 114 | |
| 115 | /* configure MX6SOLO/DUALLITE mmdc GRP io registers */ |
| 116 | struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = { |
| 117 | .grp_ddr_type = 0x000c0000, |
| 118 | .grp_ddrmode_ctl = 0x00020000, |
| 119 | .grp_ddrpke = 0x00000000, |
| 120 | .grp_addds = IMX6SDL_DRIVE_STRENGTH, |
| 121 | .grp_ctlds = IMX6SDL_DRIVE_STRENGTH, |
| 122 | .grp_ddrmode = 0x00020000, |
| 123 | .grp_b0ds = IMX6SDL_DRIVE_STRENGTH, |
| 124 | .grp_b1ds = IMX6SDL_DRIVE_STRENGTH, |
| 125 | .grp_b2ds = IMX6SDL_DRIVE_STRENGTH, |
| 126 | .grp_b3ds = IMX6SDL_DRIVE_STRENGTH, |
| 127 | .grp_b4ds = IMX6SDL_DRIVE_STRENGTH, |
| 128 | .grp_b5ds = IMX6SDL_DRIVE_STRENGTH, |
| 129 | .grp_b6ds = IMX6SDL_DRIVE_STRENGTH, |
| 130 | .grp_b7ds = IMX6SDL_DRIVE_STRENGTH, |
| 131 | }; |
| 132 | |
| 133 | /* MT41K128M16JT-125 */ |
| 134 | static struct mx6_ddr3_cfg mt41k128m16jt_125 = { |
| 135 | /* quad = 1066, duallite = 800 */ |
| 136 | .mem_speed = 1066, |
| 137 | .density = 2, |
| 138 | .width = 16, |
| 139 | .banks = 8, |
| 140 | .rowaddr = 14, |
| 141 | .coladdr = 10, |
| 142 | .pagesz = 2, |
| 143 | .trcd = 1375, |
| 144 | .trcmin = 4875, |
| 145 | .trasmin = 3500, |
| 146 | .SRT = 0, |
| 147 | }; |
| 148 | |
| 149 | static struct mx6_mmdc_calibration mx6q_1g_mmdc_calib = { |
| 150 | .p0_mpwldectrl0 = 0x00350035, |
| 151 | .p0_mpwldectrl1 = 0x001F001F, |
| 152 | .p1_mpwldectrl0 = 0x00010001, |
| 153 | .p1_mpwldectrl1 = 0x00010001, |
| 154 | .p0_mpdgctrl0 = 0x43510360, |
| 155 | .p0_mpdgctrl1 = 0x0342033F, |
| 156 | .p1_mpdgctrl0 = 0x033F033F, |
| 157 | .p1_mpdgctrl1 = 0x03290266, |
| 158 | .p0_mprddlctl = 0x4B3E4141, |
| 159 | .p1_mprddlctl = 0x47413B4A, |
| 160 | .p0_mpwrdlctl = 0x42404843, |
| 161 | .p1_mpwrdlctl = 0x4C3F4C45, |
| 162 | }; |
| 163 | |
| 164 | static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = { |
| 165 | .p0_mpwldectrl0 = 0x002F0038, |
| 166 | .p0_mpwldectrl1 = 0x001F001F, |
| 167 | .p1_mpwldectrl0 = 0x001F001F, |
| 168 | .p1_mpwldectrl1 = 0x001F001F, |
| 169 | .p0_mpdgctrl0 = 0x425C0251, |
| 170 | .p0_mpdgctrl1 = 0x021B021E, |
| 171 | .p1_mpdgctrl0 = 0x021B021E, |
| 172 | .p1_mpdgctrl1 = 0x01730200, |
| 173 | .p0_mprddlctl = 0x45474C45, |
| 174 | .p1_mprddlctl = 0x44464744, |
| 175 | .p0_mpwrdlctl = 0x3F3F3336, |
| 176 | .p1_mpwrdlctl = 0x32383630, |
| 177 | }; |
| 178 | |
| 179 | /* DDR 64bit 1GB */ |
| 180 | static struct mx6_ddr_sysinfo mem_qdl = { |
| 181 | .dsize = 2, |
| 182 | .cs1_mirror = 0, |
| 183 | /* config for full 4GB range so that get_mem_size() works */ |
| 184 | .cs_density = 32, |
| 185 | .ncs = 1, |
| 186 | .bi_on = 1, |
| 187 | /* quad = 2, duallite = 1 */ |
| 188 | .rtt_nom = 2, |
| 189 | /* quad = 2, duallite = 1 */ |
| 190 | .rtt_wr = 2, |
| 191 | .ralat = 5, |
| 192 | .walat = 0, |
| 193 | .mif3_mode = 3, |
| 194 | .rst_to_cke = 0x23, |
| 195 | .sde_to_rst = 0x10, |
Fabio Estevam | cb3c121 | 2016-08-29 20:37:15 -0300 | [diff] [blame] | 196 | .refsel = 1, /* Refresh cycles at 32KHz */ |
| 197 | .refr = 7, /* 8 refresh commands per refresh cycle */ |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 198 | }; |
| 199 | |
| 200 | static void ccgr_init(void) |
| 201 | { |
| 202 | struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; |
| 203 | |
| 204 | /* set the default clock gate to save power */ |
| 205 | writel(0x00C03F3F, &ccm->CCGR0); |
| 206 | writel(0x0030FC03, &ccm->CCGR1); |
| 207 | writel(0x0FFFC000, &ccm->CCGR2); |
| 208 | writel(0x3FF00000, &ccm->CCGR3); |
| 209 | writel(0x00FFF300, &ccm->CCGR4); |
| 210 | writel(0x0F0000C3, &ccm->CCGR5); |
| 211 | writel(0x000003FF, &ccm->CCGR6); |
| 212 | } |
| 213 | |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 214 | static void spl_dram_init(void) |
| 215 | { |
| 216 | if (is_cpu_type(MXC_CPU_MX6DL)) { |
| 217 | mt41k128m16jt_125.mem_speed = 800; |
| 218 | mem_qdl.rtt_nom = 1; |
| 219 | mem_qdl.rtt_wr = 1; |
| 220 | |
| 221 | mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs); |
| 222 | mx6_dram_cfg(&mem_qdl, &mx6dl_1g_mmdc_calib, &mt41k128m16jt_125); |
| 223 | } else if (is_cpu_type(MXC_CPU_MX6Q)) { |
| 224 | mt41k128m16jt_125.mem_speed = 1066; |
| 225 | mem_qdl.rtt_nom = 2; |
| 226 | mem_qdl.rtt_wr = 2; |
| 227 | |
| 228 | mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs); |
| 229 | mx6_dram_cfg(&mem_qdl, &mx6q_1g_mmdc_calib, &mt41k128m16jt_125); |
| 230 | } |
| 231 | |
| 232 | udelay(100); |
| 233 | } |
| 234 | |
| 235 | void board_init_f(ulong dummy) |
| 236 | { |
| 237 | ccgr_init(); |
| 238 | |
| 239 | /* setup AIPS and disable watchdog */ |
| 240 | arch_cpu_init(); |
| 241 | |
| 242 | gpr_init(); |
| 243 | |
| 244 | /* iomux */ |
| 245 | board_early_init_f(); |
| 246 | |
| 247 | /* setup GP timer */ |
| 248 | timer_init(); |
| 249 | |
| 250 | /* UART clocks enabled and gd valid - init serial console */ |
| 251 | preloader_console_init(); |
| 252 | |
| 253 | /* DDR initialization */ |
| 254 | spl_dram_init(); |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 255 | } |
Fabio Estevam | 12040b4 | 2021-12-18 18:10:20 -0300 | [diff] [blame] | 256 | |
| 257 | #define USDHC3_CD_GPIO IMX_GPIO_NR(7, 0) |
| 258 | |
| 259 | #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ |
| 260 | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ |
| 261 | PAD_CTL_SRE_FAST | PAD_CTL_HYS) |
| 262 | |
| 263 | static struct fsl_esdhc_cfg usdhc_cfg[2] = { |
| 264 | {USDHC3_BASE_ADDR}, |
| 265 | }; |
| 266 | |
| 267 | static const iomux_v3_cfg_t usdhc3_pads[] = { |
| 268 | IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 269 | IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 270 | IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 271 | IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 272 | IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 273 | IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), |
| 274 | IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), |
| 275 | }; |
| 276 | |
| 277 | int board_mmc_getcd(struct mmc *mmc) |
| 278 | { |
| 279 | return !gpio_get_value(USDHC3_CD_GPIO); |
| 280 | } |
| 281 | |
| 282 | int board_mmc_init(struct bd_info *bis) |
| 283 | { |
| 284 | SETUP_IOMUX_PADS(usdhc3_pads); |
| 285 | usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); |
| 286 | usdhc_cfg[0].max_bus_width = 4; |
| 287 | gpio_direction_input(USDHC3_CD_GPIO); |
| 288 | |
| 289 | return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); |
| 290 | } |
vpeter4 | 76b08ce | 2015-08-03 12:49:05 +0200 | [diff] [blame] | 291 | #endif |