blob: bfe4c43449ac0badceb3dca5c9bb588d9a6ec7a1 [file] [log] [blame]
Michal Simek4b066a12018-08-22 14:55:27 +02001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Configuration for Xilinx Versal
4 * (C) Copyright 2016 - 2018 Xilinx, Inc.
5 * Michal Simek <michal.simek@xilinx.com>
6 *
7 * Based on Configuration for Xilinx ZynqMP
8 */
9
10#ifndef __XILINX_VERSAL_H
11#define __XILINX_VERSAL_H
12
13#define CONFIG_REMAKE_ELF
14
15/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
16
17/* Generic Interrupt Controller Definitions */
18#define GICD_BASE 0xF9000000
19#define GICR_BASE 0xF9080000
20
21#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000
22
23#define CONFIG_SYS_MEMTEST_START 0
24#define CONFIG_SYS_MEMTEST_END 1000
25
26#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
27
28/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
29#if CONFIG_COUNTER_FREQUENCY
30# define COUNTER_FREQUENCY CONFIG_COUNTER_FREQUENCY
31#endif
32
33/* Serial setup */
34#define CONFIG_ARM_DCC
35#define CONFIG_CPU_ARMV8
36
37#define CONFIG_SYS_BAUDRATE_TABLE \
38 { 4800, 9600, 19200, 38400, 57600, 115200 }
39
40/* BOOTP options */
41#define CONFIG_BOOTP_BOOTFILESIZE
42#define CONFIG_BOOTP_MAY_FAIL
43
44#define CONFIG_IP_DEFRAG
45#define CONFIG_TFTP_BLOCKSIZE 4096
46
47/* Miscellaneous configurable options */
48#define CONFIG_SYS_LOAD_ADDR 0x8000000
49
50/* Monitor Command Prompt */
51/* Console I/O Buffer Size */
52#define CONFIG_SYS_CBSIZE 2048
53#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
54 sizeof(CONFIG_SYS_PROMPT) + 16)
55#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
56#define CONFIG_SYS_MAXARGS 64
57
58/* Ethernet driver */
59#if defined(CONFIG_ZYNQ_GEM)
60# define CONFIG_NET_MULTI
61# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
62# define PHY_ANEG_TIMEOUT 20000
63#endif
64
65#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
66
67#define CONFIG_CLOCKS
68
69#define ENV_MEM_LAYOUT_SETTINGS \
70 "fdt_high=10000000\0" \
71 "initrd_high=10000000\0" \
72 "fdt_addr_r=0x40000000\0" \
73 "pxefile_addr_r=0x10000000\0" \
74 "kernel_addr_r=0x18000000\0" \
75 "scriptaddr=0x02000000\0" \
76 "ramdisk_addr_r=0x02100000\0"
77
78#define BOOT_TARGET_DEVICES(func) \
79 func(PXE, pxe, na) \
80 func(DHCP, dhcp, na)
81
82#include <config_distro_bootcmd.h>
83
84/* Initial environment variables */
85#ifndef CONFIG_EXTRA_ENV_SETTINGS
86#define CONFIG_EXTRA_ENV_SETTINGS \
87 ENV_MEM_LAYOUT_SETTINGS \
88 BOOTENV
89#endif
90
91#endif /* __XILINX_VERSAL_H */