Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 3f26bce92acb7297f926bafb8b83459ed4c92305 / . / arch / arm / dts / rk3399-roc-pc.dtsi
blob: 9a1ce3a4ae12881b1d8d68f2fad30d87a500123c [file] [log] [blame]
Jagan Tekif2b46ad2019-12-21 13:24:37 +0530[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
4 */
5
6/dts-v1/;
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/pwm/pwm.h>
9#include "rk3399.dtsi"
10#include "rk3399-opp.dtsi"
11
12/ {
13 model = "Firefly ROC-RK3399-PC Board";
14 compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
15
16 chosen {
17 stdout-path = "serial2:1500000n8";
18 };
19
20 backlight: backlight {
21 compatible = "pwm-backlight";
22 pwms = <&pwm0 0 25000 0>;
23 };
24
25 clkin_gmac: external-gmac-clock {
26 compatible = "fixed-clock";
27 clock-frequency = <125000000>;
28 clock-output-names = "clkin_gmac";
29 #clock-cells = <0>;
30 };
31
32 adc-keys {
33 compatible = "adc-keys";
34 io-channels = <&saradc 1>;
35 io-channel-names = "buttons";
36 keyup-threshold-microvolt = <1500000>;
37 poll-interval = <100>;
38
39 recovery {
40 label = "Recovery";
41 linux,code = <KEY_VENDOR>;
42 press-threshold-microvolt = <18000>;
43 };
44 };
45
46 gpio-keys {
47 compatible = "gpio-keys";
48 autorepeat;
49 pinctrl-names = "default";
50 pinctrl-0 = <&pwr_key_l>;
51
52 power {
53 debounce-interval = <100>;
54 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
55 label = "GPIO Key Power";
56 linux,code = <KEY_POWER>;
57 wakeup-source;
58 };
59 };
60
61 leds {
62 compatible = "gpio-leds";
63 pinctrl-names = "default";
64 pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
65
66 work-led {
67 label = "green:work";
68 gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
69 default-state = "on";
70 linux,default-trigger = "heartbeat";
71 };
72
73 diy-led {
74 label = "red:diy";
75 gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
76 default-state = "off";
77 linux,default-trigger = "mmc1";
78 };
79
80 yellow-led {
81 label = "yellow:yellow-led";
82 gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
83 default-state = "off";
84 linux,default-trigger = "mmc0";
85 };
86 };
87
88 sdio_pwrseq: sdio-pwrseq {
89 compatible = "mmc-pwrseq-simple";
90 clocks = <&rk808 1>;
91 clock-names = "ext_clock";
92 pinctrl-names = "default";
93 pinctrl-0 = <&wifi_enable_h>;
94
95 /*
96 * On the module itself this is one of these (depending
97 * on the actual card populated):
98 * - SDIO_RESET_L_WL_REG_ON
99 * - PDN (power down when low)
100 */
101 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
102 };
103
104 vcc_vbus_typec0: vcc-vbus-typec0 {
105 compatible = "regulator-fixed";
106 regulator-name = "vcc_vbus_typec0";
107 regulator-always-on;
108 regulator-boot-on;
109 regulator-min-microvolt = <5000000>;
110 regulator-max-microvolt = <5000000>;
111 };
112
113 /*
114 * should be placed inside mp8859, but not until mp8859 has
115 * its own dt-binding.
116 */
117 dc_12v: mp8859-dcdc1 {
118 compatible = "regulator-fixed";
119 regulator-name = "dc_12v";
120 regulator-always-on;
121 regulator-boot-on;
122 regulator-min-microvolt = <12000000>;
123 regulator-max-microvolt = <12000000>;
124 vin-supply = <&vcc_vbus_typec0>;
125 };
126
127 /* switched by pmic_sleep */
128 vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
129 compatible = "regulator-fixed";
130 regulator-name = "vcc1v8_s3";
131 regulator-always-on;
132 regulator-boot-on;
133 regulator-min-microvolt = <1800000>;
134 regulator-max-microvolt = <1800000>;
135 vin-supply = <&vcc_1v8>;
136 };
137
138 vcc3v0_sd: vcc3v0-sd {
139 compatible = "regulator-fixed";
140 enable-active-high;
141 gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
142 pinctrl-names = "default";
143 pinctrl-0 = <&vcc3v0_sd_en>;
144 regulator-name = "vcc3v0_sd";
145 regulator-boot-on;
146 regulator-min-microvolt = <3000000>;
147 regulator-max-microvolt = <3000000>;
148 vin-supply = <&vcc3v3_sys>;
149 };
150
151 vcc3v3_sys: vcc3v3-sys {
152 compatible = "regulator-fixed";
153 regulator-name = "vcc3v3_sys";
154 regulator-always-on;
155 regulator-boot-on;
156 regulator-min-microvolt = <3300000>;
157 regulator-max-microvolt = <3300000>;
158 vin-supply = <&dc_12v>;
159 };
160
161 vcca_0v9: vcca-0v9 {
162 compatible = "regulator-fixed";
163 regulator-name = "vcca_0v9";
164 regulator-always-on;
165 regulator-boot-on;
166 regulator-min-microvolt = <900000>;
167 regulator-max-microvolt = <900000>;
168 vin-supply = <&vcc3v3_sys>;
169 };
170
171 /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
172 vcc5v0_host: vcc5v0-host-regulator {
173 compatible = "regulator-fixed";
174 enable-active-high;
175 gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
176 pinctrl-names = "default";
177 pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
178 regulator-name = "vcc5v0_host";
179 regulator-always-on;
180 vin-supply = <&vcc_sys>;
181 };
182
183 vcc_vbus_typec1: vcc-vbus-typec1 {
184 compatible = "regulator-fixed";
185 enable-active-high;
186 gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
187 pinctrl-names = "default";
188 pinctrl-0 = <&vcc_vbus_typec1_en>;
189 regulator-name = "vcc_vbus_typec1";
190 regulator-always-on;
191 vin-supply = <&vcc_sys>;
192 };
193
194 vcc_sys: vcc-sys {
195 compatible = "regulator-fixed";
196 enable-active-high;
197 gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
198 pinctrl-names = "default";
199 pinctrl-0 = <&vcc_sys_en>;
200 regulator-name = "vcc_sys";
201 regulator-always-on;
202 regulator-boot-on;
203 regulator-min-microvolt = <5000000>;
204 regulator-max-microvolt = <5000000>;
205 vin-supply = <&dc_12v>;
206 };
207
208 vdd_log: vdd-log {
209 compatible = "pwm-regulator";
210 pwms = <&pwm2 0 25000 1>;
211 regulator-name = "vdd_log";
212 regulator-always-on;
213 regulator-boot-on;
214 regulator-min-microvolt = <450000>;
215 regulator-max-microvolt = <1400000>;
216 pwm-supply = <&vcc3v3_sys>;
217 };
218};
219
220&cpu_l0 {
221 cpu-supply = <&vdd_cpu_l>;
222};
223
224&cpu_l1 {
225 cpu-supply = <&vdd_cpu_l>;
226};
227
228&cpu_l2 {
229 cpu-supply = <&vdd_cpu_l>;
230};
231
232&cpu_l3 {
233 cpu-supply = <&vdd_cpu_l>;
234};
235
236&cpu_b0 {
237 cpu-supply = <&vdd_cpu_b>;
238};
239
240&cpu_b1 {
241 cpu-supply = <&vdd_cpu_b>;
242};
243
244&emmc_phy {
245 status = "okay";
246};
247
248&gmac {
249 assigned-clocks = <&cru SCLK_RMII_SRC>;
250 assigned-clock-parents = <&clkin_gmac>;
251 clock_in_out = "input";
252 phy-supply = <&vcc_lan>;
253 phy-mode = "rgmii";
254 pinctrl-names = "default";
255 pinctrl-0 = <&rgmii_pins>;
256 snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
257 snps,reset-active-low;
258 snps,reset-delays-us = <0 10000 50000>;
259 tx_delay = <0x28>;
260 rx_delay = <0x11>;
261 status = "okay";
262};
263
264&gpu {
265 mali-supply = <&vdd_gpu>;
266 status = "okay";
267};
268
269&hdmi {
270 ddc-i2c-bus = <&i2c3>;
271 pinctrl-names = "default";
272 pinctrl-0 = <&hdmi_cec>;
273 status = "okay";
274};
275
276&hdmi_sound {
277 status = "okay";
278};
279
280&i2c0 {
281 clock-frequency = <400000>;
282 i2c-scl-rising-time-ns = <168>;
283 i2c-scl-falling-time-ns = <4>;
284 status = "okay";
285
286 rk808: pmic@1b {
287 compatible = "rockchip,rk808";
288 reg = <0x1b>;
289 interrupt-parent = <&gpio1>;
290 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
291 #clock-cells = <1>;
292 clock-output-names = "xin32k", "rk808-clkout2";
293 pinctrl-names = "default";
294 pinctrl-0 = <&pmic_int_l>;
295 rockchip,system-power-controller;
296 wakeup-source;
297
298 vcc1-supply = <&vcc3v3_sys>;
299 vcc2-supply = <&vcc3v3_sys>;
300 vcc3-supply = <&vcc3v3_sys>;
301 vcc4-supply = <&vcc3v3_sys>;
302 vcc6-supply = <&vcc3v3_sys>;
303 vcc7-supply = <&vcc3v3_sys>;
304 vcc8-supply = <&vcc3v3_sys>;
305 vcc9-supply = <&vcc3v3_sys>;
306 vcc10-supply = <&vcc3v3_sys>;
307 vcc11-supply = <&vcc3v3_sys>;
308 vcc12-supply = <&vcc3v3_sys>;
309 vcc13-supply = <&vcc3v3_sys>;
310 vcc14-supply = <&vcc3v3_sys>;
311 vddio-supply = <&vcc_3v0>;
312
313 regulators {
314 vdd_center: DCDC_REG1 {
315 regulator-name = "vdd_center";
316 regulator-always-on;
317 regulator-boot-on;
318 regulator-min-microvolt = <750000>;
319 regulator-max-microvolt = <1350000>;
320 regulator-ramp-delay = <6001>;
321 regulator-state-mem {
322 regulator-off-in-suspend;
323 };
324 };
325
326 vdd_cpu_l: DCDC_REG2 {
327 regulator-name = "vdd_cpu_l";
328 regulator-always-on;
329 regulator-boot-on;
330 regulator-min-microvolt = <750000>;
331 regulator-max-microvolt = <1350000>;
332 regulator-ramp-delay = <6001>;
333 regulator-state-mem {
334 regulator-off-in-suspend;
335 };
336 };
337
338 vcc_ddr: DCDC_REG3 {
339 regulator-name = "vcc_ddr";
340 regulator-always-on;
341 regulator-boot-on;
342 regulator-state-mem {
343 regulator-on-in-suspend;
344 };
345 };
346
347 vcc_1v8: DCDC_REG4 {
348 regulator-name = "vcc_1v8";
349 regulator-always-on;
350 regulator-boot-on;
351 regulator-min-microvolt = <1800000>;
352 regulator-max-microvolt = <1800000>;
353 regulator-state-mem {
354 regulator-on-in-suspend;
355 regulator-suspend-microvolt = <1800000>;
356 };
357 };
358
359 vcca1v8_codec: LDO_REG1 {
360 regulator-name = "vcca1v8_codec";
361 regulator-always-on;
362 regulator-boot-on;
363 regulator-min-microvolt = <1800000>;
364 regulator-max-microvolt = <1800000>;
365 regulator-state-mem {
366 regulator-off-in-suspend;
367 };
368 };
369
370 vcc1v8_hdmi: LDO_REG2 {
371 regulator-name = "vcc1v8_hdmi";
372 regulator-always-on;
373 regulator-boot-on;
374 regulator-min-microvolt = <1800000>;
375 regulator-max-microvolt = <1800000>;
376 regulator-state-mem {
377 regulator-off-in-suspend;
378 };
379 };
380
381 vcc1v8_pmu: LDO_REG3 {
382 regulator-name = "vcc1v8_pmu";
383 regulator-always-on;
384 regulator-boot-on;
385 regulator-min-microvolt = <1800000>;
386 regulator-max-microvolt = <1800000>;
387 regulator-state-mem {
388 regulator-on-in-suspend;
389 regulator-suspend-microvolt = <1800000>;
390 };
391 };
392
393 vcc_sdio: LDO_REG4 {
394 regulator-name = "vcc_sdio";
395 regulator-always-on;
396 regulator-boot-on;
397 regulator-min-microvolt = <1800000>;
398 regulator-max-microvolt = <3000000>;
399 regulator-state-mem {
400 regulator-on-in-suspend;
401 regulator-suspend-microvolt = <3000000>;
402 };
403 };
404
405 vcca3v0_codec: LDO_REG5 {
406 regulator-name = "vcca3v0_codec";
407 regulator-always-on;
408 regulator-boot-on;
409 regulator-min-microvolt = <3000000>;
410 regulator-max-microvolt = <3000000>;
411 regulator-state-mem {
412 regulator-off-in-suspend;
413 };
414 };
415
416 vcc_1v5: LDO_REG6 {
417 regulator-name = "vcc_1v5";
418 regulator-always-on;
419 regulator-boot-on;
420 regulator-min-microvolt = <1500000>;
421 regulator-max-microvolt = <1500000>;
422 regulator-state-mem {
423 regulator-on-in-suspend;
424 regulator-suspend-microvolt = <1500000>;
425 };
426 };
427
428 vcca0v9_hdmi: LDO_REG7 {
429 regulator-name = "vcca0v9_hdmi";
430 regulator-always-on;
431 regulator-boot-on;
432 regulator-min-microvolt = <900000>;
433 regulator-max-microvolt = <900000>;
434 regulator-state-mem {
435 regulator-off-in-suspend;
436 };
437 };
438
439 vcc_3v0: LDO_REG8 {
440 regulator-name = "vcc_3v0";
441 regulator-always-on;
442 regulator-boot-on;
443 regulator-min-microvolt = <3000000>;
444 regulator-max-microvolt = <3000000>;
445 regulator-state-mem {
446 regulator-on-in-suspend;
447 regulator-suspend-microvolt = <3000000>;
448 };
449 };
450
451 vcc3v3_s3: vcc_lan: SWITCH_REG1 {
452 regulator-name = "vcc3v3_s3";
453 regulator-always-on;
454 regulator-boot-on;
455 regulator-state-mem {
456 regulator-off-in-suspend;
457 };
458 };
459
460 vcc3v3_s0: SWITCH_REG2 {
461 regulator-name = "vcc3v3_s0";
462 regulator-always-on;
463 regulator-boot-on;
464 regulator-state-mem {
465 regulator-off-in-suspend;
466 };
467 };
468 };
469 };
470
471 vdd_cpu_b: regulator@40 {
472 compatible = "silergy,syr827";
473 reg = <0x40>;
474 fcs,suspend-voltage-selector = <1>;
475 pinctrl-names = "default";
476 pinctrl-0 = <&vsel1_gpio>;
477 regulator-name = "vdd_cpu_b";
478 regulator-min-microvolt = <712500>;
479 regulator-max-microvolt = <1500000>;
480 regulator-ramp-delay = <1000>;
481 regulator-always-on;
482 regulator-boot-on;
483 vin-supply = <&vcc3v3_sys>;
484
485 regulator-state-mem {
486 regulator-off-in-suspend;
487 };
488 };
489
490 vdd_gpu: regulator@41 {
491 compatible = "silergy,syr828";
492 reg = <0x41>;
493 fcs,suspend-voltage-selector = <1>;
494 pinctrl-names = "default";
495 pinctrl-0 = <&vsel2_gpio>;
496 regulator-name = "vdd_gpu";
497 regulator-min-microvolt = <712500>;
498 regulator-max-microvolt = <1500000>;
499 regulator-ramp-delay = <1000>;
500 vin-supply = <&vcc3v3_sys>;
501
502 regulator-state-mem {
503 regulator-off-in-suspend;
504 };
505 };
506};
507
508&i2c1 {
509 i2c-scl-rising-time-ns = <300>;
510 i2c-scl-falling-time-ns = <15>;
511 status = "okay";
512};
513
514&i2c3 {
515 i2c-scl-rising-time-ns = <450>;
516 i2c-scl-falling-time-ns = <15>;
517 status = "okay";
518};
519
520&i2c4 {
521 i2c-scl-rising-time-ns = <600>;
522 i2c-scl-falling-time-ns = <20>;
523 status = "okay";
524
525 fusb1: usb-typec@22 {
526 compatible = "fcs,fusb302";
527 reg = <0x22>;
528 interrupt-parent = <&gpio1>;
529 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
530 pinctrl-names = "default";
531 pinctrl-0 = <&fusb1_int>;
532 vbus-supply = <&vcc_vbus_typec1>;
533 status = "okay";
534 };
535};
536
537&i2c7 {
538 i2c-scl-rising-time-ns = <600>;
539 i2c-scl-falling-time-ns = <20>;
540 status = "okay";
541
542 fusb0: usb-typec@22 {
543 compatible = "fcs,fusb302";
544 reg = <0x22>;
545 interrupt-parent = <&gpio1>;
546 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
547 pinctrl-names = "default";
548 pinctrl-0 = <&fusb0_int>;
549 vbus-supply = <&vcc_vbus_typec0>;
550 status = "okay";
551 };
552};
553
554&i2s0 {
555 rockchip,playback-channels = <8>;
556 rockchip,capture-channels = <8>;
557 status = "okay";
558};
559
560&i2s1 {
561 rockchip,playback-channels = <2>;
562 rockchip,capture-channels = <2>;
563 status = "okay";
564};
565
566&i2s2 {
567 status = "okay";
568};
569
570&io_domains {
571 audio-supply = <&vcca1v8_codec>;
572 bt656-supply = <&vcc_3v0>;
573 gpio1830-supply = <&vcc_3v0>;
574 sdmmc-supply = <&vcc_sdio>;
575 status = "okay";
576};
577
578&pmu_io_domains {
579 pmu1830-supply = <&vcc_3v0>;
580 status = "okay";
581};
582
583&pinctrl {
584 buttons {
585 pwr_key_l: pwr-key-l {
586 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
587 };
588 };
589
590 lcd-panel {
591 lcd_panel_reset: lcd-panel-reset {
592 rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
593 };
594 };
595
596 leds {
597 diy_led_gpio: diy_led-gpio {
598 rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
599 };
600
601 work_led_gpio: work_led-gpio {
602 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
603 };
604
605 yellow_led_gpio: yellow_led-gpio {
606 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
607 };
608 };
609
610 pmic {
611 vsel1_gpio: vsel1-gpio {
612 rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
613 };
614
615 vsel2_gpio: vsel2-gpio {
616 rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
617 };
618 };
619
620 sdio-pwrseq {
621 wifi_enable_h: wifi-enable-h {
622 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
623 };
624 };
625
626 sdmmc {
627 vcc3v0_sd_en: vcc3v0-sd-en {
628 rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
629 };
630 };
631
632 pmic {
633 pmic_int_l: pmic-int-l {
634 rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
635 };
636 };
637
638 usb2 {
639 vcc5v0_host_en: vcc5v0-host-en {
640 rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
641 };
642
643 vcc_sys_en: vcc-sys-en {
644 rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
645 };
646
647 hub_rst: hub-rst {
648 rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
649 };
650 };
651
652 usb-typec {
653 vcc_vbus_typec1_en: vcc-vbus-typec1-en {
654 rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
655 };
656 };
657
658 fusb30x {
659 fusb0_int: fusb0-int {
660 rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
661 };
662
663 fusb1_int: fusb1-int {
664 rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
665 };
666 };
667};
668
669&pwm0 {
670 status = "okay";
671};
672
673&pwm2 {
674 status = "okay";
675};
676
677&saradc {
678 vref-supply = <&vcca1v8_s3>;
679 status = "okay";
680};
681
682&sdmmc {
683 bus-width = <4>;
684 cap-sd-highspeed;
685 cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
686 disable-wp;
687 max-frequency = <150000000>;
688 pinctrl-names = "default";
689 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
690 sd-uhs-sdr104;
691 vmmc-supply = <&vcc3v0_sd>;
692 vqmmc-supply = <&vcc_sdio>;
693 status = "okay";
694};
695
696&sdhci {
697 bus-width = <8>;
698 non-removable;
699 status = "okay";
700};
701
702&spi1 {
703 status = "okay";
704
705 flash@0 {
706 compatible = "jedec,spi-nor";
707 reg = <0>;
708 spi-max-frequency = <10000000>;
709 };
710};
711
712&tcphy0 {
713 status = "okay";
714};
715
716&tcphy1 {
717 status = "okay";
718};
719
720&tsadc {
721 /* tshut mode 0:CRU 1:GPIO */
722 rockchip,hw-tshut-mode = <1>;
723 /* tshut polarity 0:LOW 1:HIGH */
724 rockchip,hw-tshut-polarity = <1>;
725 status = "okay";
726};
727
728&u2phy0 {
729 status = "okay";
730
731 u2phy0_otg: otg-port {
732 phy-supply = <&vcc_vbus_typec0>;
733 status = "okay";
734 };
735
736 u2phy0_host: host-port {
737 phy-supply = <&vcc5v0_host>;
738 status = "okay";
739 };
740};
741
742&u2phy1 {
743 status = "okay";
744
745 u2phy1_otg: otg-port {
746 phy-supply = <&vcc_vbus_typec1>;
747 status = "okay";
748 };
749
750 u2phy1_host: host-port {
751 phy-supply = <&vcc5v0_host>;
752 status = "okay";
753 };
754};
755
756&uart0 {
757 pinctrl-names = "default";
758 pinctrl-0 = <&uart0_xfer &uart0_cts>;
759 status = "okay";
760};
761
762&uart2 {
763 status = "okay";
764};
765
766&usb_host0_ehci {
767 status = "okay";
768};
769
770&usb_host0_ohci {
771 status = "okay";
772};
773
774&usb_host1_ehci {
775 status = "okay";
776};
777
778&usb_host1_ohci {
779 status = "okay";
780};
781
782&usbdrd3_0 {
783 status = "okay";
784};
785
786&usbdrd_dwc3_0 {
787 status = "okay";
788};
789
790&usbdrd3_1 {
791 status = "okay";
792};
793
794&usbdrd_dwc3_1 {
795 status = "okay";
796 dr_mode = "host";
797};
798
799&vopb {
800 status = "okay";
801};
802
803&vopb_mmu {
804 status = "okay";
805};
806
807&vopl {
808 status = "okay";
809};
810
811&vopl_mmu {
812 status = "okay";
813};