| Marcel Ziswiler | 691f460 | 2022-07-21 15:27:31 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 | /* |
| 3 | * Copyright 2017-2022 Toradex |
| 4 | */ |
| 5 | |
| 6 | / { |
| 7 | chosen { |
| 8 | stdout-path = "serial0:115200n8"; |
| 9 | }; |
| 10 | |
| 11 | /* fixed crystal dedicated to mcp2515 */ |
| 12 | clk16m: clk16m { |
| 13 | compatible = "fixed-clock"; |
| 14 | #clock-cells = <0>; |
| 15 | clock-frequency = <16000000>; |
| 16 | }; |
| 17 | |
| 18 | reg_3v3: regulator-3v3 { |
| 19 | compatible = "regulator-fixed"; |
| 20 | regulator-name = "3.3V"; |
| 21 | regulator-min-microvolt = <3300000>; |
| 22 | regulator-max-microvolt = <3300000>; |
| 23 | }; |
| 24 | |
| 25 | reg_5v0: regulator-5v0 { |
| 26 | compatible = "regulator-fixed"; |
| 27 | regulator-name = "5V"; |
| 28 | regulator-min-microvolt = <5000000>; |
| 29 | regulator-max-microvolt = <5000000>; |
| 30 | }; |
| 31 | |
| 32 | reg_usbh_vbus: regulator-usbh-vbus { |
| 33 | compatible = "regulator-fixed"; |
| 34 | pinctrl-names = "default"; |
| 35 | pinctrl-0 = <&pinctrl_usbh_reg>; |
| 36 | regulator-name = "VCC_USB[1-4]"; |
| 37 | regulator-min-microvolt = <5000000>; |
| 38 | regulator-max-microvolt = <5000000>; |
| 39 | gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; |
| 40 | vin-supply = <®_5v0>; |
| 41 | }; |
| 42 | }; |
| 43 | |
| 44 | &adc1 { |
| 45 | status = "okay"; |
| 46 | }; |
| 47 | |
| 48 | &ecspi1 { |
| 49 | status = "okay"; |
| 50 | |
| 51 | mcp2515: can@0 { |
| 52 | compatible = "microchip,mcp2515"; |
| 53 | pinctrl-names = "default"; |
| 54 | pinctrl-0 = <&pinctrl_can_int>; |
| 55 | reg = <0>; |
| 56 | clocks = <&clk16m>; |
| 57 | interrupt-parent = <&gpio2>; |
| 58 | interrupts = <4 IRQ_TYPE_EDGE_FALLING>; |
| 59 | spi-max-frequency = <10000000>; |
| 60 | vdd-supply = <®_3v3>; |
| 61 | xceiver-supply = <®_5v0>; |
| 62 | status = "okay"; |
| 63 | }; |
| 64 | }; |
| 65 | |
| 66 | &i2c1 { |
| 67 | status = "okay"; |
| 68 | |
| 69 | /* M41T0M6 real time clock on carrier board */ |
| 70 | m41t0m6: rtc@68 { |
| 71 | compatible = "st,m41t0"; |
| 72 | reg = <0x68>; |
| 73 | }; |
| 74 | }; |
| 75 | |
| 76 | /* PWM <A> */ |
| 77 | &pwm4 { |
| 78 | status = "okay"; |
| 79 | }; |
| 80 | |
| 81 | /* PWM <B> */ |
| 82 | &pwm5 { |
| 83 | status = "okay"; |
| 84 | }; |
| 85 | |
| 86 | /* PWM <C> */ |
| 87 | &pwm6 { |
| 88 | status = "okay"; |
| 89 | }; |
| 90 | |
| 91 | /* PWM <D> */ |
| 92 | &pwm7 { |
| 93 | status = "okay"; |
| 94 | }; |
| 95 | |
| 96 | &uart1 { |
| 97 | status = "okay"; |
| 98 | }; |
| 99 | |
| 100 | &uart2 { |
| 101 | status = "okay"; |
| 102 | }; |
| 103 | |
| 104 | &uart5 { |
| 105 | status = "okay"; |
| 106 | }; |
| 107 | |
| 108 | &usbotg1 { |
| 109 | vbus-supply = <®_usbh_vbus>; |
| 110 | status = "okay"; |
| 111 | }; |
| 112 | |
| 113 | &usbotg2 { |
| 114 | vbus-supply = <®_usbh_vbus>; |
| 115 | status = "okay"; |
| 116 | }; |
| 117 | |
| 118 | &usdhc1 { |
| 119 | vmmc-supply = <®_3v3>; |
| 120 | status = "okay"; |
| 121 | }; |