arch/arm/mach-stm32mp/include/mach/stm32.h

/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
/*
 * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
 */

#ifndef _MACH_STM32_H_
#define _MACH_STM32_H_

#ifndef __ASSEMBLY__
#include <linux/bitops.h>

enum boot_device {
	BOOT_FLASH_SD = 0x10,
	BOOT_FLASH_SD_1 = 0x11,
	BOOT_FLASH_SD_2 = 0x12,
	BOOT_FLASH_SD_3 = 0x13,

	BOOT_FLASH_EMMC = 0x20,
	BOOT_FLASH_EMMC_1 = 0x21,
	BOOT_FLASH_EMMC_2 = 0x22,
	BOOT_FLASH_EMMC_3 = 0x23,

	BOOT_FLASH_NAND = 0x30,
	BOOT_FLASH_NAND_FMC = 0x31,

	BOOT_FLASH_NOR = 0x40,
	BOOT_FLASH_NOR_QSPI = 0x41,

	BOOT_SERIAL_UART = 0x50,
	BOOT_SERIAL_UART_1 = 0x51,
	BOOT_SERIAL_UART_2 = 0x52,
	BOOT_SERIAL_UART_3 = 0x53,
	BOOT_SERIAL_UART_4 = 0x54,
	BOOT_SERIAL_UART_5 = 0x55,
	BOOT_SERIAL_UART_6 = 0x56,
	BOOT_SERIAL_UART_7 = 0x57,
	BOOT_SERIAL_UART_8 = 0x58,

	BOOT_SERIAL_USB = 0x60,
	BOOT_SERIAL_USB_OTG = 0x62,

	BOOT_FLASH_SPINAND = 0x70,
	BOOT_FLASH_SPINAND_1 = 0x71,
};

#define TAMP_BOOT_MODE_MASK		GENMASK(15, 8)
#define TAMP_BOOT_MODE_SHIFT		8
#define TAMP_BOOT_DEVICE_MASK		GENMASK(7, 4)
#define TAMP_BOOT_INSTANCE_MASK		GENMASK(3, 0)
#define TAMP_BOOT_FORCED_MASK		GENMASK(7, 0)
#define TAMP_BOOT_DEBUG_ON		BIT(16)

enum forced_boot_mode {
	BOOT_NORMAL = 0x00,
	BOOT_FASTBOOT = 0x01,
	BOOT_RECOVERY = 0x02,
	BOOT_STM32PROG = 0x03,
	BOOT_UMS_MMC0 = 0x10,
	BOOT_UMS_MMC1 = 0x11,
	BOOT_UMS_MMC2 = 0x12,
};

#endif

/*
 * Peripheral memory map
 * only address used before device tree parsing
 */

#if defined(CONFIG_STM32MP15x) || defined(CONFIG_STM32MP13x)
#define STM32_RCC_BASE			0x50000000
#define STM32_PWR_BASE			0x50001000
#define STM32_SYSCFG_BASE		0x50020000
#ifdef CONFIG_STM32MP15x
#define STM32_DBGMCU_BASE		0x50081000
#endif
#define STM32_FMC2_BASE			0x58002000
#define STM32_IWDG2_BASE		0x5A002000
#define STM32_DDRCTRL_BASE		0x5A003000
#define STM32_DDRPHYC_BASE		0x5A004000
#define STM32_IWDG1_BASE		0x5C003000
#define STM32_TZC_BASE			0x5C006000
#define STM32_ETZPC_BASE		0x5C007000
#define STM32_STGEN_BASE		0x5C008000
#define STM32_TAMP_BASE			0x5C00A000

#ifdef CONFIG_STM32MP15x
#define STM32_USART1_BASE		0x5C000000
#define STM32_USART2_BASE		0x4000E000
#endif
#ifdef CONFIG_STM32MP13x
#define STM32_USART1_BASE		0x4c000000
#define STM32_USART2_BASE		0x4c001000
#endif
#define STM32_USART3_BASE		0x4000F000
#define STM32_UART4_BASE		0x40010000
#define STM32_UART5_BASE		0x40011000
#define STM32_USART6_BASE		0x44003000
#define STM32_UART7_BASE		0x40018000
#define STM32_UART8_BASE		0x40019000

#define STM32_SDMMC1_BASE		0x58005000
#define STM32_SDMMC2_BASE		0x58007000
#define STM32_SDMMC3_BASE		0x48004000

#ifdef CONFIG_STM32MP15x
#define STM32_SYSRAM_BASE		0x2FFC0000
#define STM32_SYSRAM_SIZE		SZ_256K
#endif

#define STM32_DDR_BASE			0xC0000000
#define STM32_DDR_SIZE			SZ_1G

#ifndef __ASSEMBLY__
/*
 * enumerated for boot interface from Bootrom, used in TAMP_BOOT_CONTEXT
 * - boot device = bit 8:4
 * - boot instance = bit 3:0
 */
#define BOOT_TYPE_MASK		0xF0
#define BOOT_TYPE_SHIFT		4
#define BOOT_INSTANCE_MASK	0x0F
#define BOOT_INSTANCE_SHIFT	0

/* TAMP registers */
#define TAMP_BACKUP_REGISTER(x)		(STM32_TAMP_BASE + 0x100 + 4 * x)

#ifdef CONFIG_STM32MP15x
#define TAMP_BACKUP_MAGIC_NUMBER	TAMP_BACKUP_REGISTER(4)
#define TAMP_BACKUP_BRANCH_ADDRESS	TAMP_BACKUP_REGISTER(5)
#define TAMP_FWU_BOOT_INFO_REG		TAMP_BACKUP_REGISTER(10)
#define TAMP_COPRO_RSC_TBL_ADDRESS	TAMP_BACKUP_REGISTER(17)
#define TAMP_COPRO_STATE		TAMP_BACKUP_REGISTER(18)
#define TAMP_BOOT_CONTEXT		TAMP_BACKUP_REGISTER(20)
#define TAMP_BOOTCOUNT			TAMP_BACKUP_REGISTER(21)

#define TAMP_FWU_BOOT_IDX_MASK		GENMASK(3, 0)

#define TAMP_FWU_BOOT_IDX_OFFSET	0
#define TAMP_COPRO_STATE_OFF		0
#define TAMP_COPRO_STATE_INIT		1
#define TAMP_COPRO_STATE_CRUN		2
#define TAMP_COPRO_STATE_CSTOP		3
#define TAMP_COPRO_STATE_STANDBY	4
#define TAMP_COPRO_STATE_CRASH		5
#endif

#ifdef CONFIG_STM32MP13x
#define TAMP_BOOTCOUNT			TAMP_BACKUP_REGISTER(31)
#define TAMP_BOOT_CONTEXT		TAMP_BACKUP_REGISTER(30)
#endif

#endif /* __ASSEMBLY__ */
#endif /* CONFIG_STM32MP15X || CONFIG_STM32MP13X */

#if CONFIG_STM32MP25X
#define STM32_RCC_BASE			0x44200000
#define STM32_TAMP_BASE			0x46010000

#define STM32_DDR_BASE			0x80000000

#define STM32_DDR_SIZE			SZ_4G

/* TAMP registers x = 0 to 127 : hardcoded description, waiting NVMEM node in DT */
#define TAMP_BACKUP_REGISTER(x)		(STM32_TAMP_BASE + 0x100 + 4 * (x))

/* TAMP registers zone 3 RIF 1 (RW) at 96*/
#define TAMP_BOOT_CONTEXT		TAMP_BACKUP_REGISTER(96)
#endif /* STM32MP25X */

/* offset used for BSEC driver: misc_read and misc_write */
#define STM32_BSEC_SHADOW_OFFSET	0x0
#define STM32_BSEC_SHADOW(id)		(STM32_BSEC_SHADOW_OFFSET + (id) * 4)
#define STM32_BSEC_OTP_OFFSET		0x80000000
#define STM32_BSEC_OTP(id)		(STM32_BSEC_OTP_OFFSET + (id) * 4)
#define STM32_BSEC_LOCK_OFFSET		0xC0000000
#define STM32_BSEC_LOCK(id)		(STM32_BSEC_LOCK_OFFSET + (id) * 4)

/* BSEC OTP index */
#ifdef CONFIG_STM32MP15x
#define BSEC_OTP_RPN	1
#define BSEC_OTP_SERIAL	13
#define BSEC_OTP_PKG	16
#define BSEC_OTP_MAC	57
#define BSEC_OTP_BOARD	59
#endif
#ifdef CONFIG_STM32MP13x
#define BSEC_OTP_RPN	1
#define BSEC_OTP_SERIAL	13
#define BSEC_OTP_MAC	57
#define BSEC_OTP_BOARD	60
#endif
#ifdef CONFIG_STM32MP25X
#define BSEC_OTP_SERIAL	5
#define BSEC_OTP_RPN	9
#define BSEC_OTP_PKG	246
#endif

#ifndef __ASSEMBLY__
#include <asm/types.h>

/* enumerated used to identify the SYSCON driver instance */
enum {
	STM32MP_SYSCON_UNKNOWN,
	STM32MP_SYSCON_SYSCFG,
};
#endif /* __ASSEMBLY__*/

#endif /* _MACH_STM32_H_ */