arch/arm/dts/rk3288-veyron-mickey.dts

/*
 * Google Veyron Mickey Rev 0 board device tree source
 *
 * Copyright 2015 Google, Inc
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 *  Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"

/ {
	model = "Google Mickey";
	compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
		     "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
		     "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
		     "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
		     "google,veyron-mickey-rev0", "google,veyron-mickey",
		     "google,veyron", "rockchip,rk3288";

	vcc_5v: vcc-5v {
		vin-supply = <&vcc33_sys>;
	};

	vcc33_io: vcc33_io {
		compatible = "regulator-fixed";
		regulator-name = "vcc33_io";
		regulator-always-on;
		regulator-boot-on;
		vin-supply = <&vcc33_sys>;
	};
};

&cpu_thermal {
	/delete-node/ trips;
	/delete-node/ cooling-maps;

	trips {
		cpu_alert_almost_warm: cpu_alert_almost_warm {
			temperature = <63000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_alert_warm: cpu_alert_warm {
			temperature = <65000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_alert_almost_hot: cpu_alert_almost_hot {
			temperature = <80000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_alert_hot: cpu_alert_hot {
			temperature = <82000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_alert_hotter: cpu_alert_hotter {
			temperature = <84000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_alert_very_hot: cpu_alert_very_hot {
			temperature = <85000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "passive";
		};
		cpu_crit: cpu_crit {
			temperature = <90000>; /* millicelsius */
			hysteresis = <2000>; /* millicelsius */
			type = "critical";
		};
	};

	cooling-maps {
		/*
		 * After 1st level, throttle the CPU down to as low as 1.4 GHz
		 * and don't let the GPU go faster than 400 MHz.  Note that we
		 * won't throttle the GPU lower than 400 MHz due to CPU
		 * heat--we'll let the GPU do the rest itself.
		 */
		cpu_warm_limit_cpu {
			trip = <&cpu_alert_warm>;
			cooling-device =
				<&cpu0 THERMAL_NO_LIMIT 4>;
		};

		/*
		 * Add some discrete steps to help throttling system deal
		 * with the fact that there are two passive cooling devices:
		 * the CPU and the GPU.
		 *
		 * - 1.2 GHz - 1.0 GHz (almost hot)
		 * - 800 MHz           (hot)
		 * - 800 MHz - 696 MHz (hotter)
		 * - 696 MHz - min     (very hot)
		 *
		 * Note:
		 * - 800 MHz appears to be a "sweet spot" for me.  I can run
		 *   some pretty serious workload here and be happy.
		 * - After 696 MHz we stop lowering voltage, so throttling
		 *   past there is less effective.
		 */
		cpu_almost_hot_limit_cpu {
			trip = <&cpu_alert_almost_hot>;
			cooling-device =
				<&cpu0 5 6>;
		};
		cpu_hot_limit_cpu {
			trip = <&cpu_alert_hot>;
			cooling-device =
				<&cpu0 7 7>;
		};
		cpu_hotter_limit_cpu {
			trip = <&cpu_alert_hotter>;
			cooling-device =
				<&cpu0 7 8>;
		};
		cpu_very_hot_limit_cpu {
			trip = <&cpu_alert_very_hot>;
			cooling-device =
				<&cpu0 8 THERMAL_NO_LIMIT>;
		};
	};
};

&emmc {
	/delete-property/mmc-hs200-1_8v;
};

&i2c2 {
	status = "disabled";
};

&i2c4 {
	status = "disabled";
};

&i2s {
	status = "okay";
	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
};

&rk808 {
	pinctrl-names = "default";
	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
		    <&gpio7 15 GPIO_ACTIVE_HIGH>;

	/delete-property/ vcc6-supply;
	/delete-property/ vcc12-supply;

	vcc11-supply = <&vcc33_sys>;

	regulators {
		/* vcc33_io is sourced directly from vcc33_sys */
		/delete-node/ LDO_REG1;
		/delete-node/ LDO_REG7;

		/* This is not a pwren anymore, but the real power supply */
		vdd10_lcd: LDO_REG7 {
			regulator-always-on;
			regulator-boot-on;
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1000000>;
			regulator-name = "vdd10_lcd";
			regulator-suspend-mem-disabled;
		};

		vcc18_lcd: LDO_REG8 {
			regulator-always-on;
			regulator-boot-on;
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-name = "vcc18_lcd";
			regulator-suspend-mem-disabled;
		};
	};
};

&pinctrl {
	hdmi {
		power_hdmi_on: power-hdmi-on {
			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	pmic {
		dvs_1: dvs-1 {
			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		dvs_2: dvs-2 {
			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};
};

&sdmmc {
	status = "disabled";
};

&sdio0 {
	status = "disabled";
};

&sdmmc {
	status = "disabled";
};

&spi0 {
	status = "disabled";
};

&usb_host0_ehci {
	status = "disabled";
};

&usb_host1 {
	status = "disabled";
};

&vcc50_hdmi {
	enable-active-high;
	gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&power_hdmi_on>;
};