| wdenk | e339a7a | 2005-05-07 19:06:32 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2005 |
| 3 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | #include <config.h> |
| 25 | |
| 26 | #include <ppc_asm.tmpl> |
| 27 | #include <ppc_defs.h> |
| 28 | #include <asm/cache.h> |
| 29 | #include <asm/mmu.h> |
| 30 | #include "test_burst.h" |
| 31 | |
| 32 | .text |
| 33 | /* |
| 34 | * void mmu_init(void); |
| 35 | * |
| 36 | * This function turns the MMU on |
| 37 | * |
| 38 | * Three 8 MByte regions are mapped 1:1, uncached |
| 39 | * - SDRAM lower 8 MByte |
| 40 | * - SDRAM higher 8 MByte |
| 41 | * - IMMR |
| 42 | */ |
| 43 | .global mmu_init |
| 44 | mmu_init: |
| 45 | tlbia /* Invalidate all TLB entries */ |
| 46 | li r8, 0 |
| 47 | mtspr MI_CTR, r8 /* Set instruction control to zero */ |
| 48 | lis r8, MD_RESETVAL@h |
| 49 | mtspr MD_CTR, r8 /* Set data TLB control */ |
| 50 | |
| 51 | /* Now map the lower 8 Meg into the TLBs. For this quick hack, |
| 52 | * we can load the instruction and data TLB registers with the |
| 53 | * same values. |
| 54 | */ |
| 55 | li r8, MI_EVALID /* Create EPN for address 0 */ |
| 56 | mtspr MI_EPN, r8 |
| 57 | mtspr MD_EPN, r8 |
| 58 | li r8, MI_PS8MEG /* Set 8M byte page */ |
| 59 | ori r8, r8, MI_SVALID /* Make it valid */ |
| 60 | mtspr MI_TWC, r8 |
| 61 | mtspr MD_TWC, r8 |
| 62 | li r8, MI_BOOTINIT|0x2 /* Create RPN for address 0 */ |
| 63 | mtspr MI_RPN, r8 /* Store TLB entry */ |
| 64 | mtspr MD_RPN, r8 |
| 65 | lis r8, MI_Kp@h /* Set the protection mode */ |
| 66 | mtspr MI_AP, r8 |
| 67 | mtspr MD_AP, r8 |
| 68 | |
| 69 | /* Now map the higher 8 Meg into the TLBs. For this quick hack, |
| 70 | * we can load the instruction and data TLB registers with the |
| 71 | * same values. |
| 72 | */ |
| 73 | lwz r9,20(r29) /* gd->ram_size */ |
| 74 | addis r9,r9,-0x80 |
| 75 | |
| 76 | mr r8, r9 /* Higher 8 Meg in SDRAM */ |
| 77 | ori r8, r8, MI_EVALID /* Mark page valid */ |
| 78 | mtspr MI_EPN, r8 |
| 79 | mtspr MD_EPN, r8 |
| 80 | li r8, MI_PS8MEG /* Set 8M byte page */ |
| 81 | ori r8, r8, MI_SVALID /* Make it valid */ |
| 82 | mtspr MI_TWC, r8 |
| 83 | mtspr MD_TWC, r8 |
| 84 | mr r8, r9 |
| 85 | ori r8, r8, MI_BOOTINIT|0x2 |
| 86 | mtspr MI_RPN, r8 /* Store TLB entry */ |
| 87 | mtspr MD_RPN, r8 |
| 88 | lis r8, MI_Kp@h /* Set the protection mode */ |
| 89 | mtspr MI_AP, r8 |
| 90 | mtspr MD_AP, r8 |
| 91 | |
| 92 | /* Map another 8 MByte at the IMMR to get the processor |
| 93 | * internal registers (among other things). |
| 94 | */ |
| 95 | mfspr r9, 638 /* Get current IMMR */ |
| 96 | andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */ |
| 97 | |
| 98 | mr r8, r9 /* Create vaddr for TLB */ |
| 99 | ori r8, r8, MD_EVALID /* Mark it valid */ |
| 100 | mtspr MD_EPN, r8 |
| 101 | li r8, MD_PS8MEG /* Set 8M byte page */ |
| 102 | ori r8, r8, MD_SVALID /* Make it valid */ |
| 103 | mtspr MD_TWC, r8 |
| 104 | mr r8, r9 /* Create paddr for TLB */ |
| 105 | ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */ |
| 106 | mtspr MD_RPN, r8 |
| 107 | |
| 108 | /* We now have the lower and higher 8 Meg mapped into TLB entries, |
| 109 | * and the caches ready to work. |
| 110 | */ |
| 111 | mfmsr r0 |
| 112 | ori r0,r0,MSR_DR|MSR_IR |
| 113 | mtspr SRR1,r0 |
| 114 | mflr r0 |
| 115 | mtspr SRR0,r0 |
| 116 | SYNC |
| 117 | rfi /* enables MMU */ |
| 118 | |
| 119 | /* |
| 120 | * void caches_init(void); |
| 121 | */ |
| 122 | .globl caches_init |
| 123 | caches_init: |
| 124 | sync |
| 125 | |
| 126 | mfspr r3, IC_CST /* Clear error bits */ |
| 127 | mfspr r3, DC_CST |
| 128 | |
| 129 | lis r3, IDC_UNALL@h /* Unlock all */ |
| 130 | mtspr IC_CST, r3 |
| 131 | mtspr DC_CST, r3 |
| 132 | |
| 133 | lis r3, IDC_INVALL@h /* Invalidate all */ |
| 134 | mtspr IC_CST, r3 |
| 135 | mtspr DC_CST, r3 |
| 136 | |
| 137 | lis r3, IDC_ENABLE@h /* Enable all */ |
| 138 | mtspr IC_CST, r3 |
| 139 | mtspr DC_CST, r3 |
| 140 | |
| 141 | blr |
| 142 | |
| 143 | /* |
| 144 | * void flush_dcache_range(unsigned long start, unsigned long stop); |
| 145 | */ |
| 146 | .global flush_dcache_range |
| 147 | flush_dcache_range: |
| 148 | li r5,CACHE_LINE_SIZE-1 |
| 149 | andc r3,r3,r5 |
| 150 | subf r4,r3,r4 |
| 151 | add r4,r4,r5 |
| 152 | srwi. r4,r4,LG_CACHE_LINE_SIZE |
| 153 | beqlr |
| 154 | mtctr r4 |
| 155 | |
| 156 | 1: dcbf 0,r3 |
| 157 | addi r3,r3,CACHE_LINE_SIZE |
| 158 | bdnz 1b |
| 159 | sync /* wait for dcbf's to get to ram */ |
| 160 | blr |
| 161 | |
| 162 | /* |
| 163 | * void disable_interrupts(void); |
| 164 | */ |
| 165 | .global disable_interrupts |
| 166 | disable_interrupts: |
| 167 | mfmsr r0 |
| 168 | rlwinm r0,r0,0,17,15 |
| 169 | mtmsr r0 |
| 170 | blr |