Hannes Petermaier | f04e999 | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 1 | /* |
Hannes Schmelzer | 7935f03 | 2015-05-28 15:41:12 +0200 | [diff] [blame] | 2 | * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> |
Hannes Petermaier | f04e999 | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 3 | * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com |
| 4 | * |
| 5 | * minimal framebuffer driver for TI's AM335x SoC to be compatible with |
| 6 | * Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c) |
| 7 | * |
| 8 | * - supporting only 24bit RGB/TFT raster Mode (not using palette) |
| 9 | * - sets up LCD controller as in 'am335x_lcdpanel' struct given |
| 10 | * - starts output DMA from gd->fb_base buffer |
| 11 | * |
| 12 | * SPDX-License-Identifier: GPL-2.0+ |
| 13 | */ |
| 14 | #include <common.h> |
| 15 | #include <asm/arch/hardware.h> |
| 16 | #include <lcd.h> |
| 17 | #include "am335x-fb.h" |
| 18 | |
| 19 | #if !defined(LCD_CNTL_BASE) |
| 20 | #error "hw-base address of LCD-Controller (LCD_CNTL_BASE) not defined!" |
| 21 | #endif |
| 22 | |
| 23 | |
| 24 | /* LCD Control Register */ |
| 25 | #define LCD_CLK_DIVISOR(x) ((x) << 8) |
| 26 | #define LCD_RASTER_MODE 0x01 |
| 27 | /* LCD Clock Enable Register */ |
| 28 | #define LCD_CORECLKEN (0x01 << 0) |
| 29 | #define LCD_LIDDCLKEN (0x01 << 1) |
| 30 | #define LCD_DMACLKEN (0x01 << 2) |
| 31 | /* LCD DMA Control Register */ |
| 32 | #define LCD_DMA_BURST_SIZE(x) ((x) << 4) |
| 33 | #define LCD_DMA_BURST_1 0x0 |
| 34 | #define LCD_DMA_BURST_2 0x1 |
| 35 | #define LCD_DMA_BURST_4 0x2 |
| 36 | #define LCD_DMA_BURST_8 0x3 |
| 37 | #define LCD_DMA_BURST_16 0x4 |
| 38 | /* LCD Timing_0 Register */ |
| 39 | #define LCD_HBPLSB(x) ((((x)-1) & 0xFF) << 24) |
| 40 | #define LCD_HFPLSB(x) ((((x)-1) & 0xFF) << 16) |
| 41 | #define LCD_HSWLSB(x) ((((x)-1) & 0x3F) << 10) |
| 42 | #define LCD_HORLSB(x) (((((x) >> 4)-1) & 0x3F) << 4) |
| 43 | #define LCD_HORMSB(x) (((((x) >> 4)-1) & 0x40) >> 4) |
| 44 | /* LCD Timing_1 Register */ |
| 45 | #define LCD_VBP(x) ((x) << 24) |
| 46 | #define LCD_VFP(x) ((x) << 16) |
| 47 | #define LCD_VSW(x) (((x)-1) << 10) |
| 48 | #define LCD_VERLSB(x) (((x)-1) & 0x3FF) |
| 49 | /* LCD Timing_2 Register */ |
| 50 | #define LCD_HSWMSB(x) ((((x)-1) & 0x3C0) << 21) |
| 51 | #define LCD_VERMSB(x) ((((x)-1) & 0x400) << 16) |
| 52 | #define LCD_HBPMSB(x) ((((x)-1) & 0x300) >> 4) |
| 53 | #define LCD_HFPMSB(x) ((((x)-1) & 0x300) >> 8) |
| 54 | #define LCD_INVMASK(x) ((x) & 0x3F00000) |
| 55 | /* LCD Raster Ctrl Register */ |
| 56 | #define LCD_TFT_24BPP_MODE (1 << 25) |
| 57 | #define LCD_TFT_24BPP_UNPACK (1 << 26) |
Martin Pietryka | d35fa82 | 2016-04-25 21:25:07 +0200 | [diff] [blame] | 58 | #define LCD_PALMODE_RAWDATA (0x02 << 20) |
Hannes Petermaier | f04e999 | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 59 | #define LCD_TFT_MODE (0x01 << 7) |
| 60 | #define LCD_RASTER_ENABLE (0x01 << 0) |
| 61 | |
| 62 | |
| 63 | /* Macro definitions */ |
| 64 | #define FBSIZE(x) ((x->hactive * x->vactive * x->bpp) >> 3) |
| 65 | |
| 66 | struct am335x_lcdhw { |
| 67 | unsigned int pid; /* 0x00 */ |
| 68 | unsigned int ctrl; /* 0x04 */ |
| 69 | unsigned int gap0; /* 0x08 */ |
| 70 | unsigned int lidd_ctrl; /* 0x0C */ |
| 71 | unsigned int lidd_cs0_conf; /* 0x10 */ |
| 72 | unsigned int lidd_cs0_addr; /* 0x14 */ |
| 73 | unsigned int lidd_cs0_data; /* 0x18 */ |
| 74 | unsigned int lidd_cs1_conf; /* 0x1C */ |
| 75 | unsigned int lidd_cs1_addr; /* 0x20 */ |
| 76 | unsigned int lidd_cs1_data; /* 0x24 */ |
| 77 | unsigned int raster_ctrl; /* 0x28 */ |
| 78 | unsigned int raster_timing0; /* 0x2C */ |
| 79 | unsigned int raster_timing1; /* 0x30 */ |
| 80 | unsigned int raster_timing2; /* 0x34 */ |
| 81 | unsigned int raster_subpanel; /* 0x38 */ |
| 82 | unsigned int raster_subpanel2; /* 0x3C */ |
| 83 | unsigned int lcddma_ctrl; /* 0x40 */ |
| 84 | unsigned int lcddma_fb0_base; /* 0x44 */ |
| 85 | unsigned int lcddma_fb0_ceiling; /* 0x48 */ |
| 86 | unsigned int lcddma_fb1_base; /* 0x4C */ |
| 87 | unsigned int lcddma_fb1_ceiling; /* 0x50 */ |
| 88 | unsigned int sysconfig; /* 0x54 */ |
| 89 | unsigned int irqstatus_raw; /* 0x58 */ |
| 90 | unsigned int irqstatus; /* 0x5C */ |
| 91 | unsigned int irqenable_set; /* 0x60 */ |
| 92 | unsigned int irqenable_clear; /* 0x64 */ |
| 93 | unsigned int gap1; /* 0x68 */ |
| 94 | unsigned int clkc_enable; /* 0x6C */ |
| 95 | unsigned int clkc_reset; /* 0x70 */ |
| 96 | }; |
| 97 | |
| 98 | static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE; |
| 99 | DECLARE_GLOBAL_DATA_PTR; |
| 100 | |
| 101 | int lcd_get_size(int *line_length) |
| 102 | { |
| 103 | *line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; |
| 104 | return *line_length * panel_info.vl_row + 0x20; |
| 105 | } |
| 106 | |
| 107 | int am335xfb_init(struct am335x_lcdpanel *panel) |
| 108 | { |
| 109 | if (0 == gd->fb_base) { |
| 110 | printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n"); |
| 111 | return -1; |
| 112 | } |
| 113 | if (0 == panel) { |
| 114 | printf("ERROR: missing ptr to am335x_lcdpanel!\n"); |
| 115 | return -1; |
| 116 | } |
| 117 | |
| 118 | debug("setting up LCD-Controller for %dx%dx%d (hfp=%d,hbp=%d,hsw=%d / ", |
| 119 | panel->hactive, panel->vactive, panel->bpp, |
| 120 | panel->hfp, panel->hbp, panel->hsw); |
| 121 | debug("vfp=%d,vbp=%d,vsw=%d / clk-div=%d)\n", |
| 122 | panel->vfp, panel->vfp, panel->vsw, panel->pxl_clk_div); |
| 123 | debug("using frambuffer at 0x%08x with size %d.\n", |
| 124 | (unsigned int)gd->fb_base, FBSIZE(panel)); |
| 125 | |
| 126 | /* palette default entry */ |
| 127 | memset((void *)gd->fb_base, 0, 0x20); |
| 128 | *(unsigned int *)gd->fb_base = 0x4000; |
| 129 | |
Hannes Petermaier | 169aa70 | 2015-02-03 13:22:23 +0100 | [diff] [blame] | 130 | /* turn ON display through powercontrol function if accessible */ |
| 131 | if (0 != panel->panel_power_ctrl) |
| 132 | panel->panel_power_ctrl(1); |
| 133 | |
| 134 | debug("am335x-fb: wait for stable power ...\n"); |
| 135 | mdelay(panel->pup_delay); |
Hannes Petermaier | f04e999 | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 136 | lcdhw->clkc_enable = LCD_CORECLKEN | LCD_LIDDCLKEN | LCD_DMACLKEN; |
| 137 | lcdhw->raster_ctrl = 0; |
| 138 | lcdhw->ctrl = LCD_CLK_DIVISOR(panel->pxl_clk_div) | LCD_RASTER_MODE; |
| 139 | lcdhw->lcddma_fb0_base = gd->fb_base; |
| 140 | lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel) + 0x20; |
| 141 | lcdhw->lcddma_fb1_base = gd->fb_base; |
| 142 | lcdhw->lcddma_fb1_ceiling = gd->fb_base + FBSIZE(panel) + 0x20; |
| 143 | lcdhw->lcddma_ctrl = LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16); |
| 144 | |
| 145 | lcdhw->raster_timing0 = LCD_HORLSB(panel->hactive) | |
| 146 | LCD_HORMSB(panel->hactive) | |
| 147 | LCD_HFPLSB(panel->hfp) | |
| 148 | LCD_HBPLSB(panel->hbp) | |
| 149 | LCD_HSWLSB(panel->hsw); |
| 150 | lcdhw->raster_timing1 = LCD_VBP(panel->vbp) | |
| 151 | LCD_VFP(panel->vfp) | |
| 152 | LCD_VSW(panel->vsw) | |
| 153 | LCD_VERLSB(panel->vactive); |
| 154 | lcdhw->raster_timing2 = LCD_HSWMSB(panel->hsw) | |
| 155 | LCD_VERMSB(panel->vactive) | |
| 156 | LCD_INVMASK(panel->pol) | |
| 157 | LCD_HBPMSB(panel->hbp) | |
| 158 | LCD_HFPMSB(panel->hfp) | |
| 159 | 0x0000FF00; /* clk cycles for ac-bias */ |
| 160 | lcdhw->raster_ctrl = LCD_TFT_24BPP_MODE | |
| 161 | LCD_TFT_24BPP_UNPACK | |
| 162 | LCD_PALMODE_RAWDATA | |
| 163 | LCD_TFT_MODE | |
| 164 | LCD_RASTER_ENABLE; |
| 165 | |
| 166 | gd->fb_base += 0x20; /* point fb behind palette */ |
| 167 | |
Hannes Petermaier | 169aa70 | 2015-02-03 13:22:23 +0100 | [diff] [blame] | 168 | debug("am335x-fb: waiting picture to be stable.\n."); |
| 169 | mdelay(panel->pon_delay); |
Hannes Petermaier | f04e999 | 2014-03-06 14:39:06 +0100 | [diff] [blame] | 170 | |
| 171 | return 0; |
| 172 | } |