Radu Pirea (NXP OSS) | f2d36cb | 2021-06-18 21:58:30 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * NXP C45 PHY driver |
| 4 | * |
| 5 | * Copyright 2021 NXP |
| 6 | * Author: Radu Pirea <radu-nicolae.pirea@oss.nxp.com> |
| 7 | */ |
| 8 | #include <common.h> |
| 9 | #include <dm.h> |
| 10 | #include <dm/devres.h> |
| 11 | #include <linux/delay.h> |
| 12 | #include <linux/math64.h> |
| 13 | #include <linux/mdio.h> |
| 14 | #include <phy.h> |
| 15 | |
| 16 | #define PHY_ID_TJA_1103 0x001BB010 |
| 17 | |
| 18 | #define VEND1_DEVICE_CONTROL 0x0040 |
| 19 | #define DEVICE_CONTROL_RESET BIT(15) |
| 20 | #define DEVICE_CONTROL_CONFIG_GLOBAL_EN BIT(14) |
| 21 | #define DEVICE_CONTROL_CONFIG_ALL_EN BIT(13) |
| 22 | |
| 23 | #define VEND1_PORT_CONTROL 0x8040 |
| 24 | #define PORT_CONTROL_EN BIT(14) |
| 25 | |
| 26 | #define VEND1_PHY_CONTROL 0x8100 |
| 27 | #define PHY_CONFIG_EN BIT(14) |
| 28 | #define PHY_START_OP BIT(0) |
| 29 | |
| 30 | #define VEND1_PHY_CONFIG 0x8108 |
| 31 | #define PHY_CONFIG_AUTO BIT(0) |
| 32 | |
| 33 | #define VEND1_PORT_INFRA_CONTROL 0xAC00 |
| 34 | #define PORT_INFRA_CONTROL_EN BIT(14) |
| 35 | |
| 36 | #define VEND1_RXID 0xAFCC |
| 37 | #define VEND1_TXID 0xAFCD |
| 38 | #define ID_ENABLE BIT(15) |
| 39 | |
| 40 | #define VEND1_ABILITIES 0xAFC4 |
| 41 | #define RGMII_ID_ABILITY BIT(15) |
| 42 | #define RGMII_ABILITY BIT(14) |
| 43 | #define RMII_ABILITY BIT(10) |
| 44 | #define REVMII_ABILITY BIT(9) |
| 45 | #define MII_ABILITY BIT(8) |
| 46 | #define SGMII_ABILITY BIT(0) |
| 47 | |
| 48 | #define VEND1_MII_BASIC_CONFIG 0xAFC6 |
| 49 | #define MII_BASIC_CONFIG_REV BIT(8) |
| 50 | #define MII_BASIC_CONFIG_SGMII 0x9 |
| 51 | #define MII_BASIC_CONFIG_RGMII 0x7 |
| 52 | #define MII_BASIC_CONFIG_RMII 0x5 |
| 53 | #define MII_BASIC_CONFIG_MII 0x4 |
| 54 | |
| 55 | #define RGMII_PERIOD_PS 8000U |
| 56 | #define PS_PER_DEGREE div_u64(RGMII_PERIOD_PS, 360) |
| 57 | #define MIN_ID_PS 1644U |
| 58 | #define MAX_ID_PS 2260U |
| 59 | #define DEFAULT_ID_PS 2000U |
| 60 | |
| 61 | #define RESET_DELAY_MS 25 |
| 62 | #define CONF_EN_DELAY_US 450 |
| 63 | |
| 64 | struct nxp_c45_phy { |
| 65 | u32 tx_delay; |
| 66 | u32 rx_delay; |
| 67 | }; |
| 68 | |
| 69 | static int nxp_c45_soft_reset(struct phy_device *phydev) |
| 70 | { |
| 71 | int tries = 10, ret; |
| 72 | |
| 73 | ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_CONTROL, |
| 74 | DEVICE_CONTROL_RESET); |
| 75 | if (ret) |
| 76 | return ret; |
| 77 | |
| 78 | do { |
| 79 | ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, |
| 80 | VEND1_DEVICE_CONTROL); |
| 81 | if (!(ret & DEVICE_CONTROL_RESET)) |
| 82 | return 0; |
| 83 | mdelay(RESET_DELAY_MS); |
| 84 | } while (tries--); |
| 85 | |
| 86 | return -EIO; |
| 87 | } |
| 88 | |
| 89 | static int nxp_c45_start_op(struct phy_device *phydev) |
| 90 | { |
| 91 | return phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONTROL, |
| 92 | PHY_START_OP); |
| 93 | } |
| 94 | |
| 95 | static int nxp_c45_config_enable(struct phy_device *phydev) |
| 96 | { |
| 97 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_CONTROL, |
| 98 | DEVICE_CONTROL_CONFIG_GLOBAL_EN | |
| 99 | DEVICE_CONTROL_CONFIG_ALL_EN); |
| 100 | udelay(CONF_EN_DELAY_US); |
| 101 | |
| 102 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_CONTROL, |
| 103 | PORT_CONTROL_EN); |
| 104 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONTROL, |
| 105 | PHY_CONFIG_EN); |
| 106 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_INFRA_CONTROL, |
| 107 | PORT_INFRA_CONTROL_EN); |
| 108 | |
| 109 | return 0; |
| 110 | } |
| 111 | |
| 112 | static u64 nxp_c45_get_phase_shift(u64 phase_offset_raw) |
| 113 | { |
| 114 | /* The delay in degree phase is 73.8 + phase_offset_raw * 0.9. |
| 115 | * To avoid floating point operations we'll multiply by 10 |
| 116 | * and get 1 decimal point precision. |
| 117 | */ |
| 118 | phase_offset_raw *= 10; |
| 119 | phase_offset_raw -= 738; |
| 120 | return div_u64(phase_offset_raw, 9); |
| 121 | } |
| 122 | |
| 123 | static void nxp_c45_disable_delays(struct phy_device *phydev) |
| 124 | { |
| 125 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, 0); |
| 126 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, 0); |
| 127 | } |
| 128 | |
| 129 | static int nxp_c45_check_delay(struct phy_device *phydev, u32 delay) |
| 130 | { |
| 131 | if (delay < MIN_ID_PS) { |
| 132 | pr_err("%s: delay value smaller than %u\n", |
| 133 | phydev->drv->name, MIN_ID_PS); |
| 134 | return -EINVAL; |
| 135 | } |
| 136 | |
| 137 | if (delay > MAX_ID_PS) { |
| 138 | pr_err("%s: delay value higher than %u\n", |
| 139 | phydev->drv->name, MAX_ID_PS); |
| 140 | return -EINVAL; |
| 141 | } |
| 142 | |
| 143 | return 0; |
| 144 | } |
| 145 | |
| 146 | static int nxp_c45_get_delays(struct phy_device *phydev) |
| 147 | { |
| 148 | struct nxp_c45_phy *priv = phydev->priv; |
| 149 | int ret; |
| 150 | |
| 151 | if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| 152 | phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
| 153 | ret = dev_read_u32(phydev->dev, "tx-internal-delay-ps", |
| 154 | &priv->tx_delay); |
| 155 | if (ret) |
| 156 | priv->tx_delay = DEFAULT_ID_PS; |
| 157 | |
| 158 | ret = nxp_c45_check_delay(phydev, priv->tx_delay); |
| 159 | if (ret) { |
| 160 | pr_err("%s: tx-internal-delay-ps invalid value\n", |
| 161 | phydev->drv->name); |
| 162 | return ret; |
| 163 | } |
| 164 | } |
| 165 | |
| 166 | if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| 167 | phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { |
| 168 | ret = dev_read_u32(phydev->dev, "rx-internal-delay-ps", |
| 169 | &priv->rx_delay); |
| 170 | if (ret) |
| 171 | priv->rx_delay = DEFAULT_ID_PS; |
| 172 | |
| 173 | ret = nxp_c45_check_delay(phydev, priv->rx_delay); |
| 174 | if (ret) { |
| 175 | pr_err("%s: rx-internal-delay-ps invalid value\n", |
| 176 | phydev->drv->name); |
| 177 | return ret; |
| 178 | } |
| 179 | } |
| 180 | |
| 181 | return 0; |
| 182 | } |
| 183 | |
| 184 | static void nxp_c45_set_delays(struct phy_device *phydev) |
| 185 | { |
| 186 | struct nxp_c45_phy *priv = phydev->priv; |
| 187 | u64 tx_delay = priv->tx_delay; |
| 188 | u64 rx_delay = priv->rx_delay; |
| 189 | u64 degree; |
| 190 | |
| 191 | if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| 192 | phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
| 193 | degree = div_u64(tx_delay, PS_PER_DEGREE); |
| 194 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, |
| 195 | ID_ENABLE | nxp_c45_get_phase_shift(degree)); |
| 196 | } else { |
| 197 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, 0); |
| 198 | } |
| 199 | |
| 200 | if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| 201 | phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { |
| 202 | degree = div_u64(rx_delay, PS_PER_DEGREE); |
| 203 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, |
| 204 | ID_ENABLE | nxp_c45_get_phase_shift(degree)); |
| 205 | } else { |
| 206 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, 0); |
| 207 | } |
| 208 | } |
| 209 | |
| 210 | static int nxp_c45_set_phy_mode(struct phy_device *phydev) |
| 211 | { |
| 212 | int ret; |
| 213 | |
| 214 | ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_ABILITIES); |
| 215 | pr_debug("%s: Clause 45 managed PHY abilities 0x%x\n", |
| 216 | phydev->drv->name, ret); |
| 217 | |
| 218 | switch (phydev->interface) { |
| 219 | case PHY_INTERFACE_MODE_RGMII: |
| 220 | if (!(ret & RGMII_ABILITY)) { |
| 221 | pr_err("%s: rgmii mode not supported\n", |
| 222 | phydev->drv->name); |
| 223 | return -EINVAL; |
| 224 | } |
| 225 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG, |
| 226 | MII_BASIC_CONFIG_RGMII); |
| 227 | nxp_c45_disable_delays(phydev); |
| 228 | break; |
| 229 | case PHY_INTERFACE_MODE_RGMII_ID: |
| 230 | case PHY_INTERFACE_MODE_RGMII_TXID: |
| 231 | case PHY_INTERFACE_MODE_RGMII_RXID: |
| 232 | if (!(ret & RGMII_ID_ABILITY)) { |
| 233 | pr_err("%s: rgmii-id, rgmii-txid, rgmii-rxid modes are not supported\n", |
| 234 | phydev->drv->name); |
| 235 | return -EINVAL; |
| 236 | } |
| 237 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG, |
| 238 | MII_BASIC_CONFIG_RGMII); |
| 239 | ret = nxp_c45_get_delays(phydev); |
| 240 | if (ret) |
| 241 | return ret; |
| 242 | |
| 243 | nxp_c45_set_delays(phydev); |
| 244 | break; |
| 245 | case PHY_INTERFACE_MODE_MII: |
| 246 | if (!(ret & MII_ABILITY)) { |
| 247 | pr_err("%s: mii mode not supported\n", |
| 248 | phydev->drv->name); |
| 249 | return -EINVAL; |
| 250 | } |
| 251 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG, |
| 252 | MII_BASIC_CONFIG_MII); |
| 253 | break; |
| 254 | case PHY_INTERFACE_MODE_RMII: |
| 255 | if (!(ret & RMII_ABILITY)) { |
| 256 | pr_err("%s: rmii mode not supported\n", |
| 257 | phydev->drv->name); |
| 258 | return -EINVAL; |
| 259 | } |
| 260 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG, |
| 261 | MII_BASIC_CONFIG_RMII); |
| 262 | break; |
| 263 | case PHY_INTERFACE_MODE_SGMII: |
| 264 | if (!(ret & SGMII_ABILITY)) { |
| 265 | pr_err("%s: sgmii mode not supported\n", |
| 266 | phydev->drv->name); |
| 267 | return -EINVAL; |
| 268 | } |
| 269 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG, |
| 270 | MII_BASIC_CONFIG_SGMII); |
| 271 | break; |
| 272 | case PHY_INTERFACE_MODE_INTERNAL: |
| 273 | break; |
| 274 | default: |
| 275 | return -EINVAL; |
| 276 | } |
| 277 | |
| 278 | return 0; |
| 279 | } |
| 280 | |
| 281 | static int nxp_c45_config(struct phy_device *phydev) |
| 282 | { |
| 283 | int ret; |
| 284 | |
| 285 | ret = nxp_c45_soft_reset(phydev); |
| 286 | if (ret) |
| 287 | return ret; |
| 288 | |
| 289 | ret = nxp_c45_config_enable(phydev); |
| 290 | if (ret) { |
| 291 | pr_err("%s: Failed to enable config\n", phydev->drv->name); |
| 292 | return ret; |
| 293 | } |
| 294 | |
| 295 | phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONFIG, |
| 296 | PHY_CONFIG_AUTO); |
| 297 | |
| 298 | ret = nxp_c45_set_phy_mode(phydev); |
| 299 | if (ret) { |
| 300 | pr_err("%s: Failed to set phy mode\n", phydev->drv->name); |
| 301 | return ret; |
| 302 | } |
| 303 | |
| 304 | phydev->autoneg = AUTONEG_DISABLE; |
| 305 | |
| 306 | return nxp_c45_start_op(phydev); |
| 307 | } |
| 308 | |
| 309 | static int nxp_c45_startup(struct phy_device *phydev) |
| 310 | { |
| 311 | u32 reg; |
| 312 | |
| 313 | reg = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT1); |
| 314 | phydev->link = !!(reg & MDIO_STAT1_LSTATUS); |
| 315 | phydev->speed = SPEED_100; |
| 316 | phydev->duplex = DUPLEX_FULL; |
| 317 | return 0; |
| 318 | } |
| 319 | |
| 320 | static int nxp_c45_probe(struct phy_device *phydev) |
| 321 | { |
| 322 | struct nxp_c45_phy *priv; |
| 323 | |
| 324 | priv = devm_kzalloc(phydev->priv, sizeof(*priv), GFP_KERNEL); |
| 325 | if (!priv) |
| 326 | return -ENOMEM; |
| 327 | |
| 328 | phydev->priv = priv; |
| 329 | |
| 330 | return 0; |
| 331 | } |
| 332 | |
Ariel D'Alessandro | 97504bc | 2022-04-12 10:31:34 -0300 | [diff] [blame] | 333 | static struct phy_driver nxp_c45_tja11xx = { |
Radu Pirea (NXP OSS) | f2d36cb | 2021-06-18 21:58:30 +0300 | [diff] [blame] | 334 | .name = "NXP C45 TJA1103", |
| 335 | .uid = PHY_ID_TJA_1103, |
| 336 | .mask = 0xfffff0, |
| 337 | .features = PHY_100BT1_FEATURES, |
| 338 | .probe = &nxp_c45_probe, |
| 339 | .config = &nxp_c45_config, |
| 340 | .startup = &nxp_c45_startup, |
| 341 | .shutdown = &genphy_shutdown, |
| 342 | }; |
| 343 | |
Ariel D'Alessandro | 97504bc | 2022-04-12 10:31:34 -0300 | [diff] [blame] | 344 | int phy_nxp_c45_tja11xx_init(void) |
Radu Pirea (NXP OSS) | f2d36cb | 2021-06-18 21:58:30 +0300 | [diff] [blame] | 345 | { |
Ariel D'Alessandro | 97504bc | 2022-04-12 10:31:34 -0300 | [diff] [blame] | 346 | phy_register(&nxp_c45_tja11xx); |
Radu Pirea (NXP OSS) | f2d36cb | 2021-06-18 21:58:30 +0300 | [diff] [blame] | 347 | return 0; |
| 348 | } |