Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 208e79dfb5c6843716a149a21765d0df431aec71 / . / include / configs / theadorable.h
blob: 85ab34c0834ac6a7bf65e13a0bba1c2d12814ed9 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -0400[diff] [blame]1/* SPDX-License-Identifier: GPL-2.0+ */
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]2/*
3 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]4 */
5
6#ifndef _CONFIG_THEADORABLE_H
7#define _CONFIG_THEADORABLE_H
8
9/*
10 * High Level Configuration Options (easy to change)
11 */
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]12
13/*
14 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
15 * for DDR ECC byte filling in the SPL before loading the main
16 * U-Boot into it.
17 */
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]18#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
19
20/*
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]21 * The debugging version enables USB support via defconfig.
22 * This version should also enable all other non-production
23 * interfaces / features.
24 */
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]25
26/* I2C */
27#define CONFIG_SYS_I2C
28#define CONFIG_SYS_I2C_MVTWSI
29#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
Stefan Roese07b5e042016-04-08 15:58:29 +0200[diff] [blame]30#define CONFIG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]31#define CONFIG_SYS_I2C_SLAVE 0x0
32#define CONFIG_SYS_I2C_SPEED 100000
33
34/* USB/EHCI configuration */
35#define CONFIG_EHCI_IS_TDI
36#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
37
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]38/* Environment in SPI NOR flash */
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]39
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]40#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
41
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]42/* Keep device tree and initrd in lower memory so the kernel can access them */
43#define CONFIG_EXTRA_ENV_SETTINGS \
44 "fdt_high=0x10000000\0" \
45 "initrd_high=0x10000000\0"
46
47/* SATA support */
48#define CONFIG_SYS_SATA_MAX_DEVICE 1
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]49#define CONFIG_LBA48
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]50
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]51/* Enable LCD and reserve 512KB from top of memory*/
52#define CONFIG_SYS_MEM_TOP_HIDE 0x80000
53
Stefan Roesed64c1132019-01-30 08:54:13 +0100[diff] [blame]54#define CONFIG_BMP_16BPP
55#define CONFIG_BMP_24BPP
56#define CONFIG_BMP_32BPP
57
Stefan Roesef0547582016-02-12 14:24:07 +0100[diff] [blame]58/* FPGA programming support */
Stefan Roesef0547582016-02-12 14:24:07 +0100[diff] [blame]59#define CONFIG_FPGA_STRATIX_V
60
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]61/*
Stefan Roese1a4e9802016-04-07 10:48:14 +0200[diff] [blame]62 * Bootcounter
63 */
Stefan Roese1a4e9802016-04-07 10:48:14 +0200[diff] [blame]64/* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */
65#define BOOTCOUNT_ADDR 0x1000
66
67/*
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]68 * mv-common.h should be defined after CMD configs since it used them
69 * to enable certain macros
70 */
71#include "mv-common.h"
72
73/*
74 * Memory layout while starting into the bin_hdr via the
75 * BootROM:
76 *
77 * 0x4000.4000 - 0x4003.4000 headers space (192KiB)
78 * 0x4000.4030 bin_hdr start address
79 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
80 * 0x4007.fffc BootROM stack top
81 *
82 * The address space between 0x4007.fffc and 0x400f.fff is not locked in
83 * L2 cache thus cannot be used.
84 */
85
86/* SPL */
87/* Defines for SPL */
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]88#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
89
90#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
91#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
92
93#ifdef CONFIG_SPL_BUILD
94#define CONFIG_SYS_MALLOC_SIMPLE
95#endif
96
97#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
98#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
99
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]100/* SPL related SPI defines */
Stefan Roese459e0642016-01-20 08:13:29 +0100[diff] [blame]101#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
102
103/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
104#define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */
105
106#endif /* _CONFIG_THEADORABLE_H */