arch/arm/dts/imx8mm-verdin.dts

// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
 * Copyright 2020 Toradex
 */

/dts-v1/;

#include <dt-bindings/usb/pd.h>
#include "imx8mm.dtsi"

/ {
	model = "Toradex Verdin iMX8M Mini Quad/DualLite";
	compatible = "toradex,verdin-imx8mm", "fsl,imx8mm";

	chosen {
		stdout-path = &uart1;
	};

	aliases {
		eeprom0 = &eeprom_module;
		eeprom1 = &eeprom_carrier_board;
		eeprom2 = &eeprom_display_adapter;
	};

	/* fixed clock dedicated to SPI CAN controller */
	clk20m: oscillator {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <20000000>;
	};

	reg_ethphy: regulator-ethphy {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
		off-on-delay = <500000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_eth>;
		regulator-boot-on;
		regulator-max-microvolt = <3300000>;
		regulator-min-microvolt = <3300000>;
		regulator-name = "V3.3_ETH";
		startup-delay-us = <200000>;
	};

	reg_usb_otg1_vbus: regulator-usb-otg1 {
		compatible = "regulator-fixed";
		enable-active-high;
		/* Verdin USB1_EN */
		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_usb1_en>;
		regulator-name = "usb_otg1_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	reg_usb_otg2_vbus: regulator-usb-otg2 {
		compatible = "regulator-fixed";
		enable-active-high;
		/* Verdin USB2_EN */
		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_usb2_en>;
		regulator-name = "usb_otg2_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	reg_usdhc2_vmmc: regulator-usdhc2 {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
		regulator-name = "V3.3_SD";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <2000>;
	};

	reg_wifi_en: regulator-wifi-en {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
		regulator-name = "V3.3_WI-FI";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <2000>;
	};
};

&A53_0 {
	arm-supply = <&buck2_reg>;
};

&clk {
	assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>, <&clk IMX8MM_AUDIO_PLL2>;
	assigned-clock-rates = <786432000>, <722534400>;
};

/* Verdin SPI_1 */
&ecspi2 {
	#address-cells = <1>;
	#size-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi2>;
	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
	status = "okay";

	spidev20: spidev@0 {
		compatible = "toradex,evalspi";
		reg = <0>;
		spi-max-frequency = <10000000>;
		status = "okay";
	};
};

/* On-module CAN controller 1 & 2 */
&ecspi3 {
	#address-cells = <1>;
	#size-cells = <0>;
	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>,
		   <&gpio1 5 GPIO_ACTIVE_LOW>;
	/* This property is required, even if marked as obsolete in the doku */
	fsl,spi-num-chipselects = <2>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi3>;
	status = "okay";

	can1: can@0 {
		compatible = "microchip,mcp2517fd";
		clocks = <&clk20m>;
		gpio-controller;
		interrupt-parent = <&gpio1>;
		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
		microchip,clock-allways-on;
		microchip,clock-out-div = <1>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can1_int>;
		reg = <0>;
		spi-max-frequency = <2000000>;
	};

	can2: can@1 {
		compatible = "microchip,mcp2517fd";
		clocks = <&clk20m>;
		gpio-controller;
		interrupt-parent = <&gpio1>;
		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can2_int>;
		reg = <1>;
		spi-max-frequency = <2000000>;
	};
};

&fec1 {
	fsl,magic-packet;
	phy-handle = <&ethphy0>;
	phy-mode = "rgmii";
	phy-supply = <&reg_ethphy>;
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&pinctrl_fec1>;
	pinctrl-1 = <&pinctrl_fec1_sleep>;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@7 {
			compatible = "ethernet-phy-ieee802.3-c22";
			interrupt-parent = <&gpio1>;
			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
			micrel,led-mode = <0>;
			reg = <7>;
		};
	};
};

&gpio4 {
	/*
	 * The SE050 security element may be driven via I2C from user space.
	 * The element itself is enabled here as it has no kernel driver.
	 */
	se050_ena {
		gpio-hog;
		gpios = <19 GPIO_ACTIVE_HIGH>;
		line-name = "SE050_ENABLE";
		output-high;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_se050_ena>;
	};
};

/* On-module I2C */
&i2c1 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	/* Assembled on V1.1 HW and later */
	pmic {
		reg = <0x25>;
		u-boot,dm-spl;
		compatible = "nxp,pca9450a";
		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
		pinctrl-0 = <&pinctrl_pmic>;
		gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>;

		regulators {
			u-boot,dm-spl;
			#address-cells = <1>;
			#size-cells = <0>;

			pca9450,pmic-buck2-uses-i2c-dvs;
			/* Run/Standby voltage */
			pca9450,pmic-buck2-dvs-voltage = <950000>, <850000>;

			buck1_reg: regulator@0 {
				reg = <0>;
				regulator-compatible = "buck1";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <2187500>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <3125>;
			};

			buck2_reg: regulator@1 {
				reg = <1>;
				regulator-compatible = "buck2";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <2187500>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <3125>;
			};

			buck3_reg: regulator@2 {
				reg = <2>;
				regulator-compatible = "buck3";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <2187500>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck4_reg: regulator@3 {
				reg = <3>;
				regulator-compatible = "buck4";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck5_reg: regulator@4 {
				reg = <4>;
				regulator-compatible = "buck5";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck6_reg: regulator@5 {
				reg = <5>;
				regulator-compatible = "buck6";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo1_reg: regulator@6 {
				reg = <6>;
				regulator-compatible = "ldo1";
				regulator-min-microvolt = <1600000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo2_reg: regulator@7 {
				reg = <7>;
				regulator-compatible = "ldo2";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1150000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo3_reg: regulator@8 {
				reg = <8>;
				regulator-compatible = "ldo3";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo4_reg: regulator@9 {
				reg = <9>;
				regulator-compatible = "ldo4";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo5_reg: regulator@10 {
				reg = <10>;
				regulator-compatible = "ldo5";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
			};

		};
	};

	/* Epson RX8130 real time clock on carrier board */
	rtc@32 {
		compatible = "epson,rx8130";
		reg = <0x32>;
	};

	eeprom_module: eeprom@50 {
		compatible = "st,24c02", "atmel,24c02", "i2c-eeprom";
		pagesize = <16>;
		reg = <0x50>;
	};
};

/* Verdin I2C_2_DSI */
&i2c2 {
	clock-frequency = <10000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
};

/* Verdin I2C_3_HDMI N/A */

/* Verdin I2C_4_CSI */
&i2c3 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";
};

/* Verdin I2C_1 */
&i2c4 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c4>;
	status = "okay";

	/* Audio Codec */
	wm8904_1a: codec@1a {
		compatible = "wlf,wm8904";
		#sound-dai-cells = <0>;
		clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
		clock-names = "mclk";
		reg = <0x1a>;
	};

	gpio_expander_21: gpio-expander@21 {
		compatible = "nxp,pcal6416";
		#gpio-cells = <2>;
		gpio-controller;
		reg = <0x21>;
	};

	/* Current measurement into module VCC */
	hwmon@40 {
		compatible = "ti,ina219";
		reg = <0x40>;
		shunt-resistor = <10000>;
		status = "okay";
	};

	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
	eeprom_display_adapter: eeprom@50 {
		compatible = "st,24c02", "atmel,24c02", "i2c-eeprom";
		pagesize = <16>;
		reg = <0x50>;
	};

	/* EEPROM on carrier board */
	eeprom_carrier_board: eeprom@57 {
		compatible = "st,24c02", "atmel,24c02", "i2c-eeprom";
		pagesize = <16>;
		reg = <0x57>;
	};
};

/* Verdin PWM_3_DSI */
&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm_1>;
	#pwm-cells = <3>;
	status = "okay";
};

/* Verdin PWM_1 */
&pwm2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm_2>;
	#pwm-cells = <3>;
	status = "okay";
};

/* Verdin PWM_2 */
&pwm3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm_3>;
	#pwm-cells = <3>;
	status = "okay";
};

/* Verdin UART_3, Console/Debug UART */
&uart1 {
	fsl,uart-has-rtscts;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

/* Verdin UART_1 */
&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	fsl,uart-has-rtscts;
	status = "okay";
};

/* Verdin UART_2 */
&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	fsl,uart-has-rtscts;
	status = "okay";
};

/* Verdin UART_4 */
/*
 * resource allocated to M4 by default, must not be accessed from A-35 or you
 * get an OOPS
 */
&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	status = "disabled";
};

/* Verdin USB_1 */
&usbotg1 {
	dr_mode = "otg";
	picophy,dc-vol-level-adjust = <7>;
	picophy,pre-emp-curr-control = <3>;
	vbus-supply = <&reg_usb_otg1_vbus>;
	status = "okay";
};

/* Verdin USB_2 */
&usbotg2 {
	dr_mode = "host";
	picophy,dc-vol-level-adjust = <7>;
	picophy,pre-emp-curr-control = <3>;
	vbus-supply = <&reg_usb_otg2_vbus>;
	status = "okay";
};

/* On-module eMMC */
&usdhc1 {
	bus-width = <8>;
	keep-power-in-suspend;
	non-removable;
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1>;
	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
	pm-ignore-notify;
	status = "okay";
	/* TODO Strobe */
};

/* Verdin SD_1 */
&usdhc2 {
	bus-width = <4>;
	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
	vmmc-supply = <&reg_usdhc2_vmmc>;
	status = "okay";
};

/* On-module Wi-Fi */
&usdhc3 {
	bus-width = <4>;
	non-removable;
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>;
	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>;
	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>;
	vmmc-supply = <&reg_wifi_en>;
	status = "okay";
};

&wdog1 {
	fsl,ext-reset-output;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_wdog>;
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_dsi_bkl_en>, <&pinctrl_gpio1>, <&pinctrl_gpio2>,
		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio5>,
		    <&pinctrl_gpio6>, <&pinctrl_gpio7>, <&pinctrl_gpio8>,
		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>,
		    <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hpd>;

	pinctrl_can1_int: can1intgrp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x1c4
		>;
	};

	pinctrl_can2_int: can2intgrp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x1c4
		>;
	};

	pinctrl_ctrl_force_off_moci: ctrlforceoffgrp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x1c4		/* SODIMM 250 */
		>;
	};

	pinctrl_dsi_bkl_en: dsi_bkl_en {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3	0x1c4		/* SODIMM 21 */
		>;
	};

	pinctrl_ecspi2: ecspi2grp {
		fsl,pins = <
			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x1c4		/* SODIMM 198 */
			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x4		/* SODIMM 200 */
			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x4		/* SODIMM 196 */
			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x1c4		/* SODIMM 202 */
		>;
	};

	pinctrl_ecspi3: ecspi3grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x1c4
			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK	0x4
			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI	0x4
			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO	0x1c4
			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25	0x1c4
		>;
	};

	pinctrl_fec1: fec1grp {
		fsl,pins = <
			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c4
		>;
	};

	pinctrl_fec1_sleep: fec1-sleepgrp {
		fsl,pins = <
			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
			MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21		0x1f
			MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20		0x1f
			MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19		0x1f
			MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18		0x1f
			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
			MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23		0x1f
			MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22		0x1f
			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x184
		>;
	};

	pinctrl_flexspi0: flexspi0grp {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x1c2		/* SODIMM 52 */
			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82		/* SODIMM 54 */
			MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B	0x82		/* SODIMM 64 */
			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82		/* SODIMM 56 */
			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82		/* SODIMM 58 */
			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82		/* SODIMM 60 */
			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82		/* SODIMM 62 */
			MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS	0x82		/* SODIMM 66 */
		>;
	};

	/* (MEZ_)GPIO_1 shared with (MEZ_)DSI_1_INT# on Verdin Development Board */
	pinctrl_gpio1: gpio1grp {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4	0x184		/* SODIMM 206 */
		>;
	};

	pinctrl_gpio2: gpio2grp {
		fsl,pins = <
			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x184		/* SODIMM 208 */
		>;
	};

	pinctrl_gpio3: gpio3grp {
		fsl,pins = <
			MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26	0x184		/* SODIMM 210 */
		>;
	};

	pinctrl_gpio4: gpio4grp {
		fsl,pins = <
			MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27	0x184		/* SODIMM 212 */
		>;
	};

	pinctrl_gpio5: gpio5grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x184		/* SODIMM 216 */
		>;
	};

	pinctrl_gpio6: gpio6grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x184		/* SODIMM 218 */
		>;
	};

	pinctrl_gpio7: gpio7grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x184		/* SODIMM 220 */
		>;
	};

	pinctrl_gpio8: gpio8grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x184		/* SODIMM 222 */
		>;
	};

	pinctrl_gpio_hog1: gpiohog1grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20	0x1c4		/* SODIMM 88 */
			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1		0x1c4		/* SODIMM 90 */
			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x1c4		/* SODIMM 92 */
			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x1c4		/* SODIMM 94 */
			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x1c4		/* SODIMM 96 */
			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x1c4		/* SODIMM 100 */
			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x1c4		/* SODIMM 102 */
			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11	0x1c4		/* SODIMM 104 */
			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x1c4		/* SODIMM 106 */
			MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13	0x1c4		/* SODIMM 108 */
			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x1c4		/* SODIMM 112 */
			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15	0x1c4		/* SODIMM 114 */
			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16	0x1c4		/* SODIMM 116 */
			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18	0x1c4		/* SODIMM 118 */
			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10	0x1c4		/* SODIMM 120 */
		>;
	};

	pinctrl_gpio_hog2: gpiohog2grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x1c4		/* SODIMM 91 */
		>;
	};

	pinctrl_gpio_hog3: gpiohog3grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x1c4		/* SODIMM 157 */
			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4		/* SODIMM 187 */
		>;
	};

	/* (MEZ_)DSI_1_INT# shared with (MEZ_)GPIO_1 on Verdin Development Board */
	pinctrl_gpio_hpd: gpiohpdgrp {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15	0x184		/* SODIMM 17 */
		>;
	};

	/* On-module I2C */
	pinctrl_i2c1: i2c1grp {
		fsl,pins = <
			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c6
			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c6
		>;
	};

	/* Verdin I2C_4_CSI */
	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c6	/* SODIMM 55 */
			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c6	/* SODIMM 53 */
		>;
	};

	/* Verdin I2C_2_DSI */
	pinctrl_i2c3: i2c3grp {
		fsl,pins = <
			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c6	/* SODIMM 95 */
			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c6	/* SODIMM 93 */
		>;
	};

	/* Verdin I2C_1 */
	pinctrl_i2c4: i2c4grp {
		fsl,pins = <
			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c6	/* SODIMM 14 */
			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c6	/* SODIMM 12 */
		>;
	};

	pinctrl_pcie0: pcie0grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19	0x6		/* SODIMM 244 */
			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x6		/* PMIC_EN_PCIe_CLK */
		>;
	};

	pinctrl_pmic: pmicirqgrp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
		>;
	};

	pinctrl_pwm_1: pwm1grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x6		/* SODIMM 19 */
		>;
	};

	pinctrl_pwm_2: pwm2grp {
		fsl,pins = <
			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT		0x6		/* SODIMM 15 */
		>;
	};

	pinctrl_pwm_3: pwm3grp {
		fsl,pins = <
			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT		0x6		/* SODIMM 16 */
		>;
	};

	pinctrl_reg_eth: regethgrp {
		fsl,pins = <
			MX8MM_IOMUXC_SD2_WP_GPIO2_IO20		0x184
		>;
	};

	pinctrl_reg_usb1_en: regusb1engrp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x184		/* SODIMM 155 */
		>;
	};

	pinctrl_reg_usb2_en: regusb2engrp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x184		/* SODIMM 185 */
		>;
	};

	pinctrl_sai2: sai2grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6		/* SODIMM 38 */
			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6		/* SODIMM 36 */
			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6		/* SODIMM 30 */
			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6		/* SODIMM 34 */
			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6		/* SODIMM 32 */
		>;
	};

	pinctrl_sai5: sai5grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0	0xd6		/* SODIMM 48 */
			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC	0xd6		/* SODIMM 44 */
			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK	0xd6		/* SODIMM 42 */
			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0	0xd6		/* SODIMM 46 */
		>;
	};

	pinctrl_se050_ena: se050enagrp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19	0x184
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX	0x1c4		/* SODIMM 147 */
			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX	0x1c4		/* SODIMM 149 */
		>;
	};

	pinctrl_uart2: uart2grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B	0x1c4		/* SODIMM 133 */
			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B	0x1c4		/* SODIMM 135 */
			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX	0x1c4		/* SODIMM 131 */
			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX	0x1c4		/* SODIMM 129 */
		>;
	};

	pinctrl_uart3: uart3grp {
		fsl,pins = <
			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x1c4	/* SODIMM 141 */
			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX		0x1c4	/* SODIMM 139 */
			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX		0x1c4	/* SODIMM 137 */
			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B		0x1c4	/* SODIMM 143 */
		>;
	};

	pinctrl_uart4: uart4grp {
		fsl,pins = <
			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x1c4		/* SODIMM 151 */
			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x1c4		/* SODIMM 153 */
		>;
	};

	pinctrl_usdhc1: usdhc1grp {
		fsl,pins = <
			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x190
		>;
	};

	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
		fsl,pins = <
			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x194
		>;
	};

	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
		fsl,pins = <
			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x196
		>;
	};

	pinctrl_usdhc2_cd: usdhc2cdgrp {
		fsl,pins = <
			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4		/* SODIMM 84 */
		>;
	};

	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x184		/* SODIMM 76 */
		>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190		/* SODIMM 78 */
			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0		/* SODIMM 74 */
			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0		/* SODIMM 80 */
			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0		/* SODIMM 82 */
			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0		/* SODIMM 70 */
			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0		/* SODIMM 72 */
		>;
	};

	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
		>;
	};

	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
		>;
	};

	pinctrl_usdhc3: usdhc3grp {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
		>;
	};

	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
		>;
	};

	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
		>;
	};

	pinctrl_wdog: wdoggrp {
		fsl,pins = <
			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
		>;
	};

	pinctrl_wifi_ctrl: wifictrlgrp {
		fsl,pins = <
			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x1c4		/* WIFI_WKUP_BT */
			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9	0x1c4		/* WIFI_W_WKUP_HOST */
			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x1c4		/* WIFI_WKUP_WLAN */
		>;
	};

	pinctrl_wifi_i2s: wifii2sgrp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK	0xd6
			MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0	0xd6
			MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC	0xd6
			MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0	0xd6
		>;
	};

	pinctrl_wifi_pwr_en: wifipwrengrp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x184		/* PMIC_EN_WIFI */
		>;
	};
};