blob: 9ed8da39efbc0665f25ba80904b938137efcbe74 [file] [log] [blame]
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +09001menu "MMC Host controller Support"
2
Maxime Ripard4f780742015-10-15 22:04:05 +02003config MMC
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +09004 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
Maxime Ripard4f780742015-10-15 22:04:05 +02006 help
Masahiro Yamadaa5ed4be2016-12-07 22:10:26 +09007 This selects MultiMediaCard, Secure Digital and Secure
8 Digital I/O support.
9
10 If you want MMC/SD/SDIO support, you should say Y here and
11 also to your specific host controller driver.
Maxime Ripard4f780742015-10-15 22:04:05 +020012
Simon Glass1e8eb1b2015-06-23 15:38:48 -060013config DM_MMC
14 bool "Enable MMC controllers using Driver Model"
15 depends on DM
16 help
Robert P. J. Day8d56db92016-07-15 13:44:45 -040017 This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glass1e8eb1b2015-06-23 15:38:48 -060018 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
19 and non-removable (e.g. eMMC chip) devices are supported. These
20 appear as block devices in U-Boot and can support filesystems such
21 as EXT4 and FAT.
22
Simon Glass394dfc02016-06-12 23:30:22 -060023config DM_MMC_OPS
24 bool "Support MMC controller operations using Driver Model"
25 depends on DM_MMC
Simon Glass0bf1f492016-10-01 14:43:19 -060026 default y if DM_MMC
Simon Glass394dfc02016-06-12 23:30:22 -060027 help
28 Driver model provides a means of supporting device operations. This
29 option moves MMC operations under the control of driver model. The
30 option will be removed as soon as all DM_MMC drivers use it, as it
31 will the only supported behaviour.
32
Masahiro Yamadae8b99722016-12-07 22:10:27 +090033if MMC
34
Marek Vasutf537e392016-12-01 02:06:33 +010035config SPL_MMC_TINY
36 bool "Tiny MMC framework in SPL"
37 help
38 Enable MMC framework tinification support. This option is useful if
39 if your SPL is extremely size constrained. Heed the warning, enable
40 this option if and only if you know exactly what you are doing, if
41 you are reading this help text, you most likely have no idea :-)
42
43 The MMC framework is reduced to bare minimum to be useful. No malloc
44 support is needed for the MMC framework operation with this option
45 enabled. The framework supports exactly one MMC device and exactly
46 one MMC driver. The MMC driver can be adjusted to avoid any malloc
47 operations too, which can remove the need for malloc support in SPL
48 and thus further reduce footprint.
49
Mateusz Kulikowskia00b0c02016-03-31 23:12:16 +020050config MSM_SDHCI
51 bool "Qualcomm SDHCI controller"
Simon Glass86120252016-06-12 23:30:31 -060052 depends on DM_MMC && BLK && DM_MMC_OPS
Masahiro Yamada7db8c172016-12-07 22:10:28 +090053 depends on MMC_SDHCI
Mateusz Kulikowskia00b0c02016-03-31 23:12:16 +020054 help
55 Enables support for SDHCI 2.0 controller present on some Qualcomm
56 Snapdragon devices. This device is compatible with eMMC v4.5 and
57 SD 3.0 specifications. Both SD and eMMC devices are supported.
58 Card-detect gpios are not supported.
59
Wenyou Yang83e88a42016-08-10 10:51:05 +080060config ATMEL_SDHCI
61 bool "Atmel SDHCI controller support"
62 depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
Masahiro Yamada7db8c172016-12-07 22:10:28 +090063 depends on MMC_SDHCI
Wenyou Yang83e88a42016-08-10 10:51:05 +080064 help
65 This enables support for the Atmel SDHCI controller, which supports
66 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
67 Memory Card Specification V3.0, and the SDIO V3.0 specification.
68 It is compliant with the SD Host Controller Standard V3.0
69 specification.
70
Masahiro Yamadab2c88682017-01-10 13:32:07 +090071config MMC_DAVINCI
72 bool "TI DAVINCI Multimedia Card Interface support"
73 depends on ARCH_DAVINCI
74 default y
75 help
76 This selects the TI DAVINCI Multimedia card Interface.
77 If you have an DAVINCI board with a Multimedia Card slot,
78 say Y here. If unsure, say N.
79
Masahiro Yamada7942e912017-01-10 13:32:04 +090080config MMC_DW
81 bool "Synopsys DesignWare Memory Card Interface"
82 help
83 This selects support for the Synopsys DesignWare Mobile Storage IP
84 block, this provides host support for SD and MMC interfaces, in both
85 PIO, internal DMA mode and external DMA mode.
86
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +090087config MMC_DW_EXYNOS
88 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
89 depends on ARCH_EXYNOS
90 depends on MMC_DW
91 default y
92 help
93 This selects support for Samsung Exynos SoC specific extensions to the
94 Synopsys DesignWare Memory Card Interface driver. Select this option
95 for platforms based on Exynos4 and Exynos5 SoC's.
96
97config MMC_DW_K3
98 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
99 depends on MMC_DW
100 help
101 This selects support for Hisilicon K3 SoC specific extensions to the
102 Synopsys DesignWare Memory Card Interface driver. Select this option
103 for platforms based on Hisilicon K3 SoC's.
104
Masahiro Yamadadc607f82017-01-10 13:32:03 +0900105config MMC_DW_ROCKCHIP
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600106 bool "Rockchip SD/MMC controller support"
107 depends on DM_MMC && OF_CONTROL
Masahiro Yamada7942e912017-01-10 13:32:04 +0900108 depends on MMC_DW
Simon Glass4ecaa6d2015-08-30 16:55:37 -0600109 help
110 This enables support for the Rockchip SD/MMM controller, which is
111 based on Designware IP. The device is compatible with at least
112 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
113 as removeable SD and micro-SD cards.
114
Masahiro Yamadaf1ad7282017-01-10 13:32:05 +0900115config MMC_DW_SOCFPGA
116 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
117 depends on ARCH_SOCFPGA
118 depends on MMC_DW
119 default y
120 help
121 This selects support for Altera SOCFPGA specific extensions to the
122 Synopsys DesignWare Memory Card Interface driver. Select this option
123 for platforms based on Altera SOCFPGA.
124
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900125config MMC_MXC
126 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
127 help
128 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
129 Multimedia Card Interface. If you have an i.MX or MPC512x platform
130 with a Multimedia Card slot, say Y here.
131
132 If unsure, say N.
133
134config MMC_MXS
135 bool "Freescale MXS Multimedia Card Interface support"
136 help
137 This selects the Freescale SSP MMC controller found on MXS based
138 platforms like mx23/28.
139
140 If unsure, say N.
141
142config MMC_OMAP_HS
143 bool "TI OMAP High Speed Multimedia Card Interface support"
144 help
145 This selects the TI OMAP High Speed Multimedia card Interface.
146 If you have an omap2plus board with a Multimedia Card slot,
147 say Y here.
148
149 If unsure, say N.
150
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900151config SH_SDHI
152 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
153 depends on RMOBILE
154 help
155 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
156
Andrei Pistiricabe033172016-01-28 15:30:18 +0530157config PIC32_SDHCI
158 bool "Microchip PIC32 on-chip SDHCI support"
159 depends on DM_MMC && MACH_PIC32
Masahiro Yamada7db8c172016-12-07 22:10:28 +0900160 depends on MMC_SDHCI
Andrei Pistiricabe033172016-01-28 15:30:18 +0530161 help
162 Support for Microchip PIC32 SDHCI controller.
163
Michal Simek90770fe2016-02-04 11:43:40 +0100164config ZYNQ_SDHCI
165 bool "Arasan SDHCI controller support"
Michal Simek2cdeab22016-12-15 11:15:49 +0100166 depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
Masahiro Yamada7db8c172016-12-07 22:10:28 +0900167 depends on MMC_SDHCI
Michal Simek90770fe2016-02-04 11:43:40 +0100168 help
169 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
170
Kever Yang65922e02016-07-18 17:00:58 +0800171config ROCKCHIP_SDHCI
172 bool "Arasan SDHCI controller for Rockchip support"
173 depends on DM_MMC && BLK && DM_MMC_OPS
Masahiro Yamada7db8c172016-12-07 22:10:28 +0900174 depends on MMC_SDHCI
Kever Yang65922e02016-07-18 17:00:58 +0800175 help
176 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
177
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900178config MMC_UNIPHIER
179 bool "UniPhier SD/MMC Host Controller support"
180 depends on ARCH_UNIPHIER
Masahiro Yamadac2326532016-12-30 23:20:14 +0900181 depends on BLK && DM_MMC_OPS
182 depends on OF_CONTROL
Masahiro Yamadaa0cfcc02016-02-18 19:52:48 +0900183 help
184 This selects support for the SD/MMC Host Controller on UniPhier SoCs.
185
Simon Glassf9eebac2016-05-01 13:52:42 -0600186config SANDBOX_MMC
187 bool "Sandbox MMC support"
188 depends on MMC && SANDBOX
189 help
190 This select a dummy sandbox MMC driver. At present this does nothing
191 other than allow sandbox to be build with MMC support. This
192 improves build coverage for sandbox and makes it easier to detect
193 MMC build errors with sandbox.
194
Masahiro Yamada7db8c172016-12-07 22:10:28 +0900195config MMC_SDHCI
196 bool "Secure Digital Host Controller Interface support"
197 help
198 This selects the generic Secure Digital Host Controller Interface.
199 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
200 and Toshiba(R). Most controllers found in laptops are of this type.
201
202 If you have a controller with this interface, say Y here.
203
204 If unsure, say N.
205
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900206config MMC_SDHCI_IO_ACCESSORS
207 bool
208 depends on MMC_SDHCI
209 help
210 This is silent Kconfig symbol that is selected by the drivers that
211 need to overwrite SDHCI IO memory accessors.
212
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900213config MMC_SDHCI_SDMA
214 bool "Support SDHCI SDMA"
215 depends on MMC_SDHCI
216 help
217 This enables support for the SDMA (Single Operation DMA) defined
218 in the SD Host Controller Standard Specification Version 1.00 .
219
220config MMC_SDHCI_BCM2835
221 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
222 depends on ARCH_BCM283X
223 depends on MMC_SDHCI
Masahiro Yamadabfd110f2016-12-07 22:10:30 +0900224 select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900225 help
226 This selects the BCM2835 SD/MMC controller.
227
228 If you have a BCM2835 platform with SD or MMC devices,
229 say Y here.
230
231 If unsure, say N.
232
Masahiro Yamadadcbc4432016-12-30 22:41:46 +0900233config MMC_SDHCI_CADENCE
234 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
235 depends on BLK && DM_MMC_OPS
236 depends on MMC_SDHCI
237 depends on OF_CONTROL
238 help
239 This selects the Cadence SD/SDIO/eMMC driver.
240
241 If you have a controller with this interface, say Y here.
242
243 If unsure, say N.
244
Masahiro Yamada124f6ce2016-12-07 22:10:29 +0900245config MMC_SDHCI_KONA
246 bool "SDHCI support on Broadcom KONA platform"
247 depends on MMC_SDHCI
248 help
249 This selects the Broadcom Kona Secure Digital Host Controller
250 Interface(SDHCI) support.
251 This is used in Broadcom mobile SoCs.
252
253 If you have a controller with this interface, say Y here.
254
255config MMC_SDHCI_MV
256 bool "SDHCI support on Marvell platform"
257 depends on ARCH_MVEBU
258 depends on MMC_SDHCI
259 help
260 This selects the Secure Digital Host Controller Interface on
261 Marvell platform.
262
263 If you have a controller with this interface, say Y here.
264
265 If unsure, say N.
266
267config MMC_SDHCI_S5P
268 bool "SDHCI support on Samsung S5P SoC"
269 depends on MMC_SDHCI
270 help
271 This selects the Secure Digital Host Controller Interface (SDHCI)
272 on Samsung S5P SoCs.
273
274 If you have a controller with this interface, say Y here.
275
276 If unsure, say N.
277
278config MMC_SDHCI_SPEAR
279 bool "SDHCI support on ST SPEAr platform"
280 depends on MMC_SDHCI
281 help
282 This selects the Secure Digital Host Controller Interface (SDHCI)
283 often referrered to as the HSMMC block in some of the ST SPEAR range
284 of SoC
285
286 If you have a controller with this interface, say Y here.
287
288 If unsure, say N.
289
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900290config MMC_SDHCI_TEGRA
291 bool "SDHCI platform support for the Tegra SD/MMC Controller"
292 depends on TEGRA
293 default y
294 help
295 This selects the Tegra SD/MMC controller. If you have a Tegra
296 platform with SD or MMC devices, say Y here.
297
298 If unsure, say N.
299
300config MMC_SUNXI
301 bool "Allwinner sunxi SD/MMC Host Controller support"
Masahiro Yamada41ff5292017-01-12 12:16:15 +0900302 depends on ARCH_SUNXI && !UART0_PORT_F
Masahiro Yamadab2c88682017-01-10 13:32:07 +0900303 default y
304 help
305 This selects support for the SD/MMC Host Controller on
306 Allwinner sunxi SoCs.
307
Masahiro Yamadae8b99722016-12-07 22:10:27 +0900308endif
309
Nobuhiro Iwamatsu3ec5f862014-12-17 08:03:00 +0900310endmenu
York Sun097e3602016-12-28 08:43:42 -0800311
312config SYS_FSL_ERRATUM_ESDHC111
313 bool
314
315config SYS_FSL_ERRATUM_ESDHC13
316 bool
317
318config SYS_FSL_ERRATUM_ESDHC135
319 bool
320
321config SYS_FSL_ERRATUM_ESDHC_A001
322 bool