Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Peng Fan | 78f22a5 | 2017-05-11 10:35:00 +0800 | [diff] [blame] | 2 | /* |
| 3 | * Copyright 2017 NXP |
| 4 | * |
| 5 | * Peng Fan <peng.fan@nxp.com> |
Peng Fan | 78f22a5 | 2017-05-11 10:35:00 +0800 | [diff] [blame] | 6 | */ |
| 7 | |
Peng Fan | 54ee6a4 | 2015-08-07 16:43:45 +0800 | [diff] [blame] | 8 | #include <common.h> |
| 9 | #include <fdtdec.h> |
| 10 | #include <errno.h> |
| 11 | #include <dm.h> |
| 12 | #include <i2c.h> |
| 13 | #include <power/pmic.h> |
| 14 | #include <power/regulator.h> |
| 15 | #include <power/pfuze100_pmic.h> |
| 16 | |
| 17 | /** |
| 18 | * struct pfuze100_regulator_desc - regulator descriptor |
| 19 | * |
| 20 | * @name: Identify name for the regulator. |
| 21 | * @type: Indicates the regulator type. |
| 22 | * @uV_step: Voltage increase for each selector. |
| 23 | * @vsel_reg: Register for adjust regulator voltage for normal. |
| 24 | * @vsel_mask: Mask bit for setting regulator voltage for normal. |
| 25 | * @stby_reg: Register for adjust regulator voltage for standby. |
| 26 | * @stby_mask: Mask bit for setting regulator voltage for standby. |
| 27 | * @volt_table: Voltage mapping table (if table based mapping). |
| 28 | * @voltage: Current voltage for REGULATOR_TYPE_FIXED type regulator. |
| 29 | */ |
| 30 | struct pfuze100_regulator_desc { |
| 31 | char *name; |
| 32 | enum regulator_type type; |
| 33 | unsigned int uV_step; |
| 34 | unsigned int vsel_reg; |
| 35 | unsigned int vsel_mask; |
| 36 | unsigned int stby_reg; |
| 37 | unsigned int stby_mask; |
| 38 | unsigned int *volt_table; |
| 39 | unsigned int voltage; |
| 40 | }; |
| 41 | |
| 42 | /** |
| 43 | * struct pfuze100_regulator_platdata - platform data for pfuze100 |
| 44 | * |
| 45 | * @desc: Points the description entry of one regulator of pfuze100 |
| 46 | */ |
| 47 | struct pfuze100_regulator_platdata { |
| 48 | struct pfuze100_regulator_desc *desc; |
| 49 | }; |
| 50 | |
| 51 | #define PFUZE100_FIXED_REG(_name, base, vol) \ |
| 52 | { \ |
| 53 | .name = #_name, \ |
| 54 | .type = REGULATOR_TYPE_FIXED, \ |
| 55 | .voltage = (vol), \ |
| 56 | } |
| 57 | |
| 58 | #define PFUZE100_SW_REG(_name, base, step) \ |
| 59 | { \ |
| 60 | .name = #_name, \ |
| 61 | .type = REGULATOR_TYPE_BUCK, \ |
| 62 | .uV_step = (step), \ |
| 63 | .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| 64 | .vsel_mask = 0x3F, \ |
| 65 | .stby_reg = (base) + PFUZE100_STBY_OFFSET, \ |
| 66 | .stby_mask = 0x3F, \ |
| 67 | } |
| 68 | |
| 69 | #define PFUZE100_SWB_REG(_name, base, mask, step, voltages) \ |
| 70 | { \ |
| 71 | .name = #_name, \ |
| 72 | .type = REGULATOR_TYPE_BUCK, \ |
| 73 | .uV_step = (step), \ |
| 74 | .vsel_reg = (base), \ |
| 75 | .vsel_mask = (mask), \ |
| 76 | .volt_table = (voltages), \ |
| 77 | } |
| 78 | |
| 79 | #define PFUZE100_SNVS_REG(_name, base, mask, voltages) \ |
| 80 | { \ |
| 81 | .name = #_name, \ |
| 82 | .type = REGULATOR_TYPE_OTHER, \ |
| 83 | .vsel_reg = (base), \ |
| 84 | .vsel_mask = (mask), \ |
| 85 | .volt_table = (voltages), \ |
| 86 | } |
| 87 | |
| 88 | #define PFUZE100_VGEN_REG(_name, base, step) \ |
| 89 | { \ |
| 90 | .name = #_name, \ |
| 91 | .type = REGULATOR_TYPE_LDO, \ |
| 92 | .uV_step = (step), \ |
| 93 | .vsel_reg = (base), \ |
| 94 | .vsel_mask = 0xF, \ |
| 95 | .stby_reg = (base), \ |
| 96 | .stby_mask = 0x20, \ |
| 97 | } |
| 98 | |
| 99 | #define PFUZE3000_VCC_REG(_name, base, step) \ |
| 100 | { \ |
| 101 | .name = #_name, \ |
| 102 | .type = REGULATOR_TYPE_LDO, \ |
| 103 | .uV_step = (step), \ |
| 104 | .vsel_reg = (base), \ |
| 105 | .vsel_mask = 0x3, \ |
| 106 | .stby_reg = (base), \ |
| 107 | .stby_mask = 0x20, \ |
| 108 | } |
| 109 | |
| 110 | #define PFUZE3000_SW1_REG(_name, base, step) \ |
| 111 | { \ |
| 112 | .name = #_name, \ |
| 113 | .type = REGULATOR_TYPE_BUCK, \ |
| 114 | .uV_step = (step), \ |
| 115 | .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| 116 | .vsel_mask = 0x1F, \ |
| 117 | .stby_reg = (base) + PFUZE100_STBY_OFFSET, \ |
| 118 | .stby_mask = 0x1F, \ |
| 119 | } |
| 120 | |
| 121 | #define PFUZE3000_SW2_REG(_name, base, step) \ |
| 122 | { \ |
| 123 | .name = #_name, \ |
| 124 | .type = REGULATOR_TYPE_BUCK, \ |
| 125 | .uV_step = (step), \ |
| 126 | .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| 127 | .vsel_mask = 0x7, \ |
| 128 | .stby_reg = (base) + PFUZE100_STBY_OFFSET, \ |
| 129 | .stby_mask = 0x7, \ |
| 130 | } |
| 131 | |
| 132 | #define PFUZE3000_SW3_REG(_name, base, step) \ |
| 133 | { \ |
| 134 | .name = #_name, \ |
| 135 | .type = REGULATOR_TYPE_BUCK, \ |
| 136 | .uV_step = (step), \ |
| 137 | .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| 138 | .vsel_mask = 0xF, \ |
| 139 | .stby_reg = (base) + PFUZE100_STBY_OFFSET, \ |
| 140 | .stby_mask = 0xF, \ |
| 141 | } |
| 142 | |
| 143 | static unsigned int pfuze100_swbst[] = { |
| 144 | 5000000, 5050000, 5100000, 5150000 |
| 145 | }; |
| 146 | |
| 147 | static unsigned int pfuze100_vsnvs[] = { |
| 148 | 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, -1 |
| 149 | }; |
| 150 | |
| 151 | static unsigned int pfuze3000_vsnvs[] = { |
| 152 | -1, -1, -1, -1, -1, -1, 3000000, -1 |
| 153 | }; |
| 154 | |
| 155 | static unsigned int pfuze3000_sw2lo[] = { |
| 156 | 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000 |
| 157 | }; |
| 158 | |
| 159 | /* PFUZE100 */ |
| 160 | static struct pfuze100_regulator_desc pfuze100_regulators[] = { |
| 161 | PFUZE100_SW_REG(sw1ab, PFUZE100_SW1ABVOL, 25000), |
| 162 | PFUZE100_SW_REG(sw1c, PFUZE100_SW1CVOL, 25000), |
| 163 | PFUZE100_SW_REG(sw2, PFUZE100_SW2VOL, 25000), |
| 164 | PFUZE100_SW_REG(sw3a, PFUZE100_SW3AVOL, 25000), |
| 165 | PFUZE100_SW_REG(sw3b, PFUZE100_SW3BVOL, 25000), |
| 166 | PFUZE100_SW_REG(sw4, PFUZE100_SW4VOL, 25000), |
| 167 | PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst), |
| 168 | PFUZE100_SNVS_REG(vsnvs, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), |
| 169 | PFUZE100_FIXED_REG(vrefddr, PFUZE100_VREFDDRCON, 750000), |
| 170 | PFUZE100_VGEN_REG(vgen1, PFUZE100_VGEN1VOL, 50000), |
| 171 | PFUZE100_VGEN_REG(vgen2, PFUZE100_VGEN2VOL, 50000), |
| 172 | PFUZE100_VGEN_REG(vgen3, PFUZE100_VGEN3VOL, 100000), |
| 173 | PFUZE100_VGEN_REG(vgen4, PFUZE100_VGEN4VOL, 100000), |
| 174 | PFUZE100_VGEN_REG(vgen5, PFUZE100_VGEN5VOL, 100000), |
| 175 | PFUZE100_VGEN_REG(vgen6, PFUZE100_VGEN6VOL, 100000), |
| 176 | }; |
| 177 | |
| 178 | /* PFUZE200 */ |
| 179 | static struct pfuze100_regulator_desc pfuze200_regulators[] = { |
| 180 | PFUZE100_SW_REG(sw1ab, PFUZE100_SW1ABVOL, 25000), |
| 181 | PFUZE100_SW_REG(sw2, PFUZE100_SW2VOL, 25000), |
| 182 | PFUZE100_SW_REG(sw3a, PFUZE100_SW3AVOL, 25000), |
| 183 | PFUZE100_SW_REG(sw3b, PFUZE100_SW3BVOL, 25000), |
| 184 | PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst), |
| 185 | PFUZE100_SNVS_REG(vsnvs, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), |
| 186 | PFUZE100_FIXED_REG(vrefddr, PFUZE100_VREFDDRCON, 750000), |
| 187 | PFUZE100_VGEN_REG(vgen1, PFUZE100_VGEN1VOL, 50000), |
| 188 | PFUZE100_VGEN_REG(vgen2, PFUZE100_VGEN2VOL, 50000), |
| 189 | PFUZE100_VGEN_REG(vgen3, PFUZE100_VGEN3VOL, 100000), |
| 190 | PFUZE100_VGEN_REG(vgen4, PFUZE100_VGEN4VOL, 100000), |
| 191 | PFUZE100_VGEN_REG(vgen5, PFUZE100_VGEN5VOL, 100000), |
| 192 | PFUZE100_VGEN_REG(vgen6, PFUZE100_VGEN6VOL, 100000), |
| 193 | }; |
| 194 | |
| 195 | /* PFUZE3000 */ |
| 196 | static struct pfuze100_regulator_desc pfuze3000_regulators[] = { |
| 197 | PFUZE3000_SW1_REG(sw1a, PFUZE100_SW1ABVOL, 25000), |
| 198 | PFUZE3000_SW1_REG(sw1b, PFUZE100_SW1CVOL, 25000), |
| 199 | PFUZE100_SWB_REG(sw2, PFUZE100_SW2VOL, 0x7, 50000, pfuze3000_sw2lo), |
| 200 | PFUZE3000_SW3_REG(sw3, PFUZE100_SW3AVOL, 50000), |
| 201 | PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst), |
| 202 | PFUZE100_SNVS_REG(vsnvs, PFUZE100_VSNVSVOL, 0x7, pfuze3000_vsnvs), |
| 203 | PFUZE100_FIXED_REG(vrefddr, PFUZE100_VREFDDRCON, 750000), |
| 204 | PFUZE100_VGEN_REG(vldo1, PFUZE100_VGEN1VOL, 100000), |
| 205 | PFUZE100_VGEN_REG(vldo2, PFUZE100_VGEN2VOL, 50000), |
| 206 | PFUZE3000_VCC_REG(vccsd, PFUZE100_VGEN3VOL, 150000), |
| 207 | PFUZE3000_VCC_REG(v33, PFUZE100_VGEN4VOL, 150000), |
| 208 | PFUZE100_VGEN_REG(vldo3, PFUZE100_VGEN5VOL, 100000), |
| 209 | PFUZE100_VGEN_REG(vldo4, PFUZE100_VGEN6VOL, 100000), |
| 210 | }; |
| 211 | |
| 212 | #define MODE(_id, _val, _name) { \ |
| 213 | .id = _id, \ |
| 214 | .register_value = _val, \ |
| 215 | .name = _name, \ |
| 216 | } |
| 217 | |
| 218 | /* SWx Buck regulator mode */ |
| 219 | static struct dm_regulator_mode pfuze_sw_modes[] = { |
| 220 | MODE(OFF_OFF, OFF_OFF, "OFF_OFF"), |
| 221 | MODE(PWM_OFF, PWM_OFF, "PWM_OFF"), |
| 222 | MODE(PFM_OFF, PFM_OFF, "PFM_OFF"), |
| 223 | MODE(APS_OFF, APS_OFF, "APS_OFF"), |
| 224 | MODE(PWM_PWM, PWM_PWM, "PWM_PWM"), |
| 225 | MODE(PWM_APS, PWM_APS, "PWM_APS"), |
| 226 | MODE(APS_APS, APS_APS, "APS_APS"), |
| 227 | MODE(APS_PFM, APS_PFM, "APS_PFM"), |
| 228 | MODE(PWM_PFM, PWM_PFM, "PWM_PFM"), |
| 229 | }; |
| 230 | |
| 231 | /* Boost Buck regulator mode for normal operation */ |
| 232 | static struct dm_regulator_mode pfuze_swbst_modes[] = { |
| 233 | MODE(SWBST_MODE_OFF, SWBST_MODE_OFF , "SWBST_MODE_OFF"), |
| 234 | MODE(SWBST_MODE_PFM, SWBST_MODE_PFM, "SWBST_MODE_PFM"), |
| 235 | MODE(SWBST_MODE_AUTO, SWBST_MODE_AUTO, "SWBST_MODE_AUTO"), |
| 236 | MODE(SWBST_MODE_APS, SWBST_MODE_APS, "SWBST_MODE_APS"), |
| 237 | }; |
| 238 | |
| 239 | /* VGENx LDO regulator mode for normal operation */ |
| 240 | static struct dm_regulator_mode pfuze_ldo_modes[] = { |
| 241 | MODE(LDO_MODE_OFF, LDO_MODE_OFF, "LDO_MODE_OFF"), |
| 242 | MODE(LDO_MODE_ON, LDO_MODE_ON, "LDO_MODE_ON"), |
| 243 | }; |
| 244 | |
| 245 | static struct pfuze100_regulator_desc *se_desc(struct pfuze100_regulator_desc *desc, |
| 246 | int size, |
| 247 | const char *name) |
| 248 | { |
| 249 | int i; |
| 250 | |
| 251 | for (i = 0; i < size; desc++) { |
| 252 | if (!strcmp(desc->name, name)) |
| 253 | return desc; |
| 254 | continue; |
| 255 | } |
| 256 | |
| 257 | return NULL; |
| 258 | } |
| 259 | |
| 260 | static int pfuze100_regulator_probe(struct udevice *dev) |
| 261 | { |
| 262 | struct dm_regulator_uclass_platdata *uc_pdata; |
| 263 | struct pfuze100_regulator_platdata *plat = dev_get_platdata(dev); |
| 264 | struct pfuze100_regulator_desc *desc; |
| 265 | |
| 266 | switch (dev_get_driver_data(dev_get_parent(dev))) { |
| 267 | case PFUZE100: |
| 268 | desc = se_desc(pfuze100_regulators, |
| 269 | ARRAY_SIZE(pfuze100_regulators), |
| 270 | dev->name); |
| 271 | break; |
| 272 | case PFUZE200: |
| 273 | desc = se_desc(pfuze200_regulators, |
| 274 | ARRAY_SIZE(pfuze200_regulators), |
| 275 | dev->name); |
| 276 | break; |
| 277 | case PFUZE3000: |
| 278 | desc = se_desc(pfuze3000_regulators, |
| 279 | ARRAY_SIZE(pfuze3000_regulators), |
| 280 | dev->name); |
| 281 | break; |
| 282 | default: |
| 283 | debug("Unsupported PFUZE\n"); |
| 284 | return -EINVAL; |
| 285 | } |
| 286 | if (!desc) { |
| 287 | debug("Do not support regulator %s\n", dev->name); |
| 288 | return -EINVAL; |
| 289 | } |
| 290 | |
| 291 | plat->desc = desc; |
| 292 | uc_pdata = dev_get_uclass_platdata(dev); |
| 293 | |
| 294 | uc_pdata->type = desc->type; |
| 295 | if (uc_pdata->type == REGULATOR_TYPE_BUCK) { |
| 296 | if (!strcmp(dev->name, "swbst")) { |
| 297 | uc_pdata->mode = pfuze_swbst_modes; |
| 298 | uc_pdata->mode_count = ARRAY_SIZE(pfuze_swbst_modes); |
| 299 | } else { |
| 300 | uc_pdata->mode = pfuze_sw_modes; |
| 301 | uc_pdata->mode_count = ARRAY_SIZE(pfuze_sw_modes); |
| 302 | } |
| 303 | } else if (uc_pdata->type == REGULATOR_TYPE_LDO) { |
| 304 | uc_pdata->mode = pfuze_ldo_modes; |
| 305 | uc_pdata->mode_count = ARRAY_SIZE(pfuze_ldo_modes); |
| 306 | } else { |
| 307 | uc_pdata->mode = NULL; |
| 308 | uc_pdata->mode_count = 0; |
| 309 | } |
| 310 | |
| 311 | return 0; |
| 312 | } |
| 313 | |
| 314 | static int pfuze100_regulator_mode(struct udevice *dev, int op, int *opmode) |
| 315 | { |
Peng Fan | dfaf374 | 2017-05-11 10:35:01 +0800 | [diff] [blame] | 316 | int val; |
Peng Fan | 54ee6a4 | 2015-08-07 16:43:45 +0800 | [diff] [blame] | 317 | struct pfuze100_regulator_platdata *plat = dev_get_platdata(dev); |
| 318 | struct pfuze100_regulator_desc *desc = plat->desc; |
| 319 | |
| 320 | if (op == PMIC_OP_GET) { |
| 321 | if (desc->type == REGULATOR_TYPE_BUCK) { |
| 322 | if (!strcmp(dev->name, "swbst")) { |
| 323 | val = pmic_reg_read(dev->parent, |
| 324 | desc->vsel_reg); |
| 325 | if (val < 0) |
| 326 | return val; |
| 327 | |
| 328 | val &= SWBST_MODE_MASK; |
| 329 | val >>= SWBST_MODE_SHIFT; |
| 330 | *opmode = val; |
| 331 | |
| 332 | return 0; |
| 333 | } |
| 334 | val = pmic_reg_read(dev->parent, |
| 335 | desc->vsel_reg + |
| 336 | PFUZE100_MODE_OFFSET); |
| 337 | if (val < 0) |
| 338 | return val; |
| 339 | |
| 340 | val &= SW_MODE_MASK; |
| 341 | val >>= SW_MODE_SHIFT; |
| 342 | *opmode = val; |
| 343 | |
| 344 | return 0; |
| 345 | |
| 346 | } else if (desc->type == REGULATOR_TYPE_LDO) { |
| 347 | val = pmic_reg_read(dev->parent, desc->vsel_reg); |
| 348 | if (val < 0) |
| 349 | return val; |
| 350 | |
| 351 | val &= LDO_MODE_MASK; |
| 352 | val >>= LDO_MODE_SHIFT; |
| 353 | *opmode = val; |
| 354 | |
| 355 | return 0; |
| 356 | } else { |
| 357 | return -EINVAL; |
| 358 | } |
| 359 | } |
| 360 | |
| 361 | if (desc->type == REGULATOR_TYPE_BUCK) { |
| 362 | if (!strcmp(dev->name, "swbst")) |
| 363 | return pmic_clrsetbits(dev->parent, desc->vsel_reg, |
| 364 | SWBST_MODE_MASK, |
| 365 | *opmode << SWBST_MODE_SHIFT); |
| 366 | |
| 367 | val = pmic_clrsetbits(dev->parent, |
| 368 | desc->vsel_reg + PFUZE100_MODE_OFFSET, |
| 369 | SW_MODE_MASK, |
| 370 | *opmode << SW_MODE_SHIFT); |
| 371 | |
| 372 | } else if (desc->type == REGULATOR_TYPE_LDO) { |
| 373 | val = pmic_clrsetbits(dev->parent, desc->vsel_reg, |
| 374 | LDO_MODE_MASK, |
| 375 | *opmode << LDO_MODE_SHIFT); |
| 376 | return val; |
| 377 | } else { |
| 378 | return -EINVAL; |
| 379 | } |
| 380 | |
| 381 | return 0; |
| 382 | } |
| 383 | |
| 384 | static int pfuze100_regulator_enable(struct udevice *dev, int op, bool *enable) |
| 385 | { |
Peng Fan | dfaf374 | 2017-05-11 10:35:01 +0800 | [diff] [blame] | 386 | int val; |
Peng Fan | 54ee6a4 | 2015-08-07 16:43:45 +0800 | [diff] [blame] | 387 | int ret, on_off; |
| 388 | struct dm_regulator_uclass_platdata *uc_pdata = |
| 389 | dev_get_uclass_platdata(dev); |
| 390 | |
| 391 | if (op == PMIC_OP_GET) { |
| 392 | if (!strcmp(dev->name, "vrefddr")) { |
| 393 | val = pmic_reg_read(dev->parent, PFUZE100_VREFDDRCON); |
| 394 | if (val < 0) |
| 395 | return val; |
| 396 | |
| 397 | if (val & VREFDDRCON_EN) |
| 398 | *enable = true; |
| 399 | else |
| 400 | *enable = false; |
| 401 | return 0; |
| 402 | } |
| 403 | ret = pfuze100_regulator_mode(dev, op, &on_off); |
| 404 | if (ret) |
| 405 | return ret; |
| 406 | switch (on_off) { |
| 407 | /* OFF_OFF, SWBST_MODE_OFF, LDO_MODE_OFF have same value */ |
| 408 | case OFF_OFF: |
| 409 | *enable = false; |
| 410 | break; |
| 411 | default: |
| 412 | *enable = true; |
| 413 | break; |
| 414 | } |
| 415 | } else if (op == PMIC_OP_SET) { |
| 416 | if (!strcmp(dev->name, "vrefddr")) { |
| 417 | val = pmic_reg_read(dev->parent, PFUZE100_VREFDDRCON); |
| 418 | if (val < 0) |
| 419 | return val; |
| 420 | |
| 421 | if (val & VREFDDRCON_EN) |
| 422 | return 0; |
| 423 | val |= VREFDDRCON_EN; |
| 424 | |
| 425 | return pmic_reg_write(dev->parent, PFUZE100_VREFDDRCON, |
| 426 | val); |
| 427 | } |
| 428 | |
| 429 | if (uc_pdata->type == REGULATOR_TYPE_LDO) { |
| 430 | on_off = *enable ? LDO_MODE_ON : LDO_MODE_OFF; |
| 431 | } else if (uc_pdata->type == REGULATOR_TYPE_BUCK) { |
| 432 | if (!strcmp(dev->name, "swbst")) |
| 433 | on_off = *enable ? SWBST_MODE_AUTO : |
| 434 | SWBST_MODE_OFF; |
| 435 | else |
| 436 | on_off = *enable ? APS_PFM : OFF_OFF; |
| 437 | } else { |
| 438 | return -EINVAL; |
| 439 | } |
| 440 | |
| 441 | return pfuze100_regulator_mode(dev, op, &on_off); |
| 442 | } |
| 443 | |
| 444 | return 0; |
| 445 | } |
| 446 | |
| 447 | static int pfuze100_regulator_val(struct udevice *dev, int op, int *uV) |
| 448 | { |
| 449 | int i; |
Peng Fan | dfaf374 | 2017-05-11 10:35:01 +0800 | [diff] [blame] | 450 | int val; |
Peng Fan | 54ee6a4 | 2015-08-07 16:43:45 +0800 | [diff] [blame] | 451 | struct pfuze100_regulator_platdata *plat = dev_get_platdata(dev); |
| 452 | struct pfuze100_regulator_desc *desc = plat->desc; |
| 453 | struct dm_regulator_uclass_platdata *uc_pdata = |
| 454 | dev_get_uclass_platdata(dev); |
| 455 | |
| 456 | if (op == PMIC_OP_GET) { |
| 457 | *uV = 0; |
| 458 | if (uc_pdata->type == REGULATOR_TYPE_FIXED) { |
| 459 | *uV = desc->voltage; |
| 460 | } else if (desc->volt_table) { |
| 461 | val = pmic_reg_read(dev->parent, desc->vsel_reg); |
| 462 | if (val < 0) |
| 463 | return val; |
| 464 | val &= desc->vsel_mask; |
| 465 | *uV = desc->volt_table[val]; |
| 466 | } else { |
| 467 | if (uc_pdata->min_uV < 0) { |
| 468 | debug("Need to provide min_uV in dts.\n"); |
| 469 | return -EINVAL; |
| 470 | } |
| 471 | val = pmic_reg_read(dev->parent, desc->vsel_reg); |
| 472 | if (val < 0) |
| 473 | return val; |
| 474 | val &= desc->vsel_mask; |
| 475 | *uV = uc_pdata->min_uV + (int)val * desc->uV_step; |
| 476 | } |
| 477 | |
| 478 | return 0; |
| 479 | } |
| 480 | |
| 481 | if (uc_pdata->type == REGULATOR_TYPE_FIXED) { |
| 482 | debug("Set voltage for REGULATOR_TYPE_FIXED regulator\n"); |
| 483 | return -EINVAL; |
| 484 | } else if (desc->volt_table) { |
Trent Piepho | f2e81fa | 2019-04-04 21:52:04 +0000 | [diff] [blame] | 485 | for (i = 0; i <= desc->vsel_mask; i++) { |
Peng Fan | 54ee6a4 | 2015-08-07 16:43:45 +0800 | [diff] [blame] | 486 | if (*uV == desc->volt_table[i]) |
| 487 | break; |
| 488 | } |
Trent Piepho | f2e81fa | 2019-04-04 21:52:04 +0000 | [diff] [blame] | 489 | if (i == desc->vsel_mask + 1) { |
Peng Fan | 54ee6a4 | 2015-08-07 16:43:45 +0800 | [diff] [blame] | 490 | debug("Unsupported voltage %u\n", *uV); |
| 491 | return -EINVAL; |
| 492 | } |
| 493 | |
| 494 | return pmic_clrsetbits(dev->parent, desc->vsel_reg, |
| 495 | desc->vsel_mask, i); |
| 496 | } else { |
| 497 | if (uc_pdata->min_uV < 0) { |
| 498 | debug("Need to provide min_uV in dts.\n"); |
| 499 | return -EINVAL; |
| 500 | } |
| 501 | return pmic_clrsetbits(dev->parent, desc->vsel_reg, |
| 502 | desc->vsel_mask, |
| 503 | (*uV - uc_pdata->min_uV) / desc->uV_step); |
| 504 | } |
| 505 | |
| 506 | return 0; |
| 507 | } |
| 508 | |
| 509 | static int pfuze100_regulator_get_value(struct udevice *dev) |
| 510 | { |
| 511 | int uV; |
| 512 | int ret; |
| 513 | |
| 514 | ret = pfuze100_regulator_val(dev, PMIC_OP_GET, &uV); |
| 515 | if (ret) |
| 516 | return ret; |
| 517 | |
| 518 | return uV; |
| 519 | } |
| 520 | |
| 521 | static int pfuze100_regulator_set_value(struct udevice *dev, int uV) |
| 522 | { |
| 523 | return pfuze100_regulator_val(dev, PMIC_OP_SET, &uV); |
| 524 | } |
| 525 | |
Keerthy | d726bb8 | 2017-06-13 09:53:50 +0530 | [diff] [blame] | 526 | static int pfuze100_regulator_get_enable(struct udevice *dev) |
Peng Fan | 54ee6a4 | 2015-08-07 16:43:45 +0800 | [diff] [blame] | 527 | { |
| 528 | int ret; |
| 529 | bool enable = false; |
| 530 | |
| 531 | ret = pfuze100_regulator_enable(dev, PMIC_OP_GET, &enable); |
| 532 | if (ret) |
| 533 | return ret; |
| 534 | |
| 535 | return enable; |
| 536 | } |
| 537 | |
| 538 | static int pfuze100_regulator_set_enable(struct udevice *dev, bool enable) |
| 539 | { |
| 540 | return pfuze100_regulator_enable(dev, PMIC_OP_SET, &enable); |
| 541 | } |
| 542 | |
| 543 | static int pfuze100_regulator_get_mode(struct udevice *dev) |
| 544 | { |
| 545 | int mode; |
| 546 | int ret; |
| 547 | |
| 548 | ret = pfuze100_regulator_mode(dev, PMIC_OP_GET, &mode); |
| 549 | if (ret) |
| 550 | return ret; |
| 551 | |
| 552 | return mode; |
| 553 | } |
| 554 | |
| 555 | static int pfuze100_regulator_set_mode(struct udevice *dev, int mode) |
| 556 | { |
| 557 | return pfuze100_regulator_mode(dev, PMIC_OP_SET, &mode); |
| 558 | } |
| 559 | |
| 560 | static const struct dm_regulator_ops pfuze100_regulator_ops = { |
| 561 | .get_value = pfuze100_regulator_get_value, |
| 562 | .set_value = pfuze100_regulator_set_value, |
| 563 | .get_enable = pfuze100_regulator_get_enable, |
| 564 | .set_enable = pfuze100_regulator_set_enable, |
| 565 | .get_mode = pfuze100_regulator_get_mode, |
| 566 | .set_mode = pfuze100_regulator_set_mode, |
| 567 | }; |
| 568 | |
| 569 | U_BOOT_DRIVER(pfuze100_regulator) = { |
| 570 | .name = "pfuze100_regulator", |
| 571 | .id = UCLASS_REGULATOR, |
| 572 | .ops = &pfuze100_regulator_ops, |
| 573 | .probe = pfuze100_regulator_probe, |
| 574 | .platdata_auto_alloc_size = sizeof(struct pfuze100_regulator_platdata), |
| 575 | }; |