Andrew Davis | 0561899 | 2023-04-11 13:24:58 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 2 | /* |
Andrew Davis | 0561899 | 2023-04-11 13:24:58 -0500 | [diff] [blame] | 3 | * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 4 | */ |
| 5 | /dts-v1/; |
| 6 | |
| 7 | #include "dra72x.dtsi" |
| 8 | #include <dt-bindings/gpio/gpio.h> |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 9 | #include <dt-bindings/clk/ti-dra7-atl.h> |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 10 | |
| 11 | / { |
| 12 | compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; |
| 13 | |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 14 | aliases { |
| 15 | display0 = &hdmi0; |
| 16 | }; |
| 17 | |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 18 | chosen { |
| 19 | stdout-path = &uart1; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 20 | }; |
| 21 | |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 22 | evm_12v0: fixedregulator-evm12v0 { |
| 23 | /* main supply */ |
| 24 | compatible = "regulator-fixed"; |
| 25 | regulator-name = "evm_12v0"; |
| 26 | regulator-min-microvolt = <12000000>; |
| 27 | regulator-max-microvolt = <12000000>; |
| 28 | regulator-always-on; |
| 29 | regulator-boot-on; |
| 30 | }; |
| 31 | |
| 32 | evm_5v0: fixedregulator-evm5v0 { |
| 33 | /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */ |
| 34 | /* Output 1 of LM5140QRWGTQ1 on dra71-evm */ |
| 35 | compatible = "regulator-fixed"; |
| 36 | regulator-name = "evm_5v0"; |
| 37 | regulator-min-microvolt = <5000000>; |
| 38 | regulator-max-microvolt = <5000000>; |
| 39 | vin-supply = <&evm_12v0>; |
| 40 | regulator-always-on; |
| 41 | regulator-boot-on; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 42 | }; |
| 43 | |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 44 | vsys_3v3: fixedregulator-vsys3v3 { |
| 45 | /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */ |
| 46 | /* Output 2 of LM5140QRWGTQ1 on dra71-evm */ |
| 47 | compatible = "regulator-fixed"; |
| 48 | regulator-name = "vsys_3v3"; |
| 49 | regulator-min-microvolt = <3300000>; |
| 50 | regulator-max-microvolt = <3300000>; |
| 51 | vin-supply = <&evm_12v0>; |
| 52 | regulator-always-on; |
| 53 | regulator-boot-on; |
| 54 | }; |
| 55 | |
| 56 | evm_3v3_sw: fixedregulator-evm_3v3 { |
| 57 | /* TPS22965DSG */ |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 58 | compatible = "regulator-fixed"; |
| 59 | regulator-name = "evm_3v3"; |
| 60 | regulator-min-microvolt = <3300000>; |
| 61 | regulator-max-microvolt = <3300000>; |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 62 | vin-supply = <&vsys_3v3>; |
| 63 | regulator-always-on; |
| 64 | regulator-boot-on; |
| 65 | }; |
| 66 | |
| 67 | aic_dvdd: fixedregulator-aic_dvdd { |
| 68 | /* TPS77018DBVT */ |
| 69 | compatible = "regulator-fixed"; |
| 70 | regulator-name = "aic_dvdd"; |
| 71 | vin-supply = <&evm_3v3_sw>; |
| 72 | regulator-min-microvolt = <1800000>; |
| 73 | regulator-max-microvolt = <1800000>; |
| 74 | }; |
| 75 | |
| 76 | evm_3v3_sd: fixedregulator-sd { |
| 77 | compatible = "regulator-fixed"; |
| 78 | regulator-name = "evm_3v3_sd"; |
| 79 | regulator-min-microvolt = <3300000>; |
| 80 | regulator-max-microvolt = <3300000>; |
| 81 | vin-supply = <&evm_3v3_sw>; |
| 82 | enable-active-high; |
| 83 | gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 84 | }; |
| 85 | |
| 86 | extcon_usb1: extcon_usb1 { |
| 87 | compatible = "linux,extcon-usb-gpio"; |
| 88 | id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; |
| 89 | }; |
| 90 | |
| 91 | extcon_usb2: extcon_usb2 { |
| 92 | compatible = "linux,extcon-usb-gpio"; |
| 93 | id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; |
| 94 | }; |
| 95 | |
| 96 | hdmi0: connector { |
| 97 | compatible = "hdmi-connector"; |
| 98 | label = "hdmi"; |
| 99 | |
| 100 | type = "a"; |
| 101 | |
| 102 | port { |
| 103 | hdmi_connector_in: endpoint { |
| 104 | remote-endpoint = <&tpd12s015_out>; |
| 105 | }; |
| 106 | }; |
| 107 | }; |
| 108 | |
| 109 | tpd12s015: encoder { |
| 110 | compatible = "ti,tpd12s015"; |
| 111 | |
| 112 | gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */ |
| 113 | <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */ |
| 114 | <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ |
| 115 | |
| 116 | ports { |
| 117 | #address-cells = <1>; |
| 118 | #size-cells = <0>; |
| 119 | |
| 120 | port@0 { |
| 121 | reg = <0>; |
| 122 | |
| 123 | tpd12s015_in: endpoint { |
| 124 | remote-endpoint = <&hdmi_out>; |
| 125 | }; |
| 126 | }; |
| 127 | |
| 128 | port@1 { |
| 129 | reg = <1>; |
| 130 | |
| 131 | tpd12s015_out: endpoint { |
| 132 | remote-endpoint = <&hdmi_connector_in>; |
| 133 | }; |
| 134 | }; |
| 135 | }; |
| 136 | }; |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 137 | |
| 138 | sound0: sound0 { |
| 139 | compatible = "simple-audio-card"; |
| 140 | simple-audio-card,name = "DRA7xx-EVM"; |
| 141 | simple-audio-card,widgets = |
| 142 | "Headphone", "Headphone Jack", |
| 143 | "Line", "Line Out", |
| 144 | "Microphone", "Mic Jack", |
| 145 | "Line", "Line In"; |
| 146 | simple-audio-card,routing = |
| 147 | "Headphone Jack", "HPLOUT", |
| 148 | "Headphone Jack", "HPROUT", |
| 149 | "Line Out", "LLOUT", |
| 150 | "Line Out", "RLOUT", |
| 151 | "MIC3L", "Mic Jack", |
| 152 | "MIC3R", "Mic Jack", |
| 153 | "Mic Jack", "Mic Bias", |
| 154 | "LINE1L", "Line In", |
| 155 | "LINE1R", "Line In"; |
| 156 | simple-audio-card,format = "dsp_b"; |
| 157 | simple-audio-card,bitclock-master = <&sound0_master>; |
| 158 | simple-audio-card,frame-master = <&sound0_master>; |
| 159 | simple-audio-card,bitclock-inversion; |
| 160 | |
| 161 | sound0_master: simple-audio-card,cpu { |
| 162 | sound-dai = <&mcasp3>; |
| 163 | system-clock-frequency = <5644800>; |
| 164 | }; |
| 165 | |
| 166 | simple-audio-card,codec { |
| 167 | sound-dai = <&tlv320aic3106>; |
| 168 | clocks = <&atl_clkin2_ck>; |
| 169 | }; |
| 170 | }; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 171 | }; |
| 172 | |
| 173 | &dra7_pmx_core { |
| 174 | mmc1_pins_default: mmc1_pins_default { |
| 175 | pinctrl-single,pins = < |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 176 | DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ |
| 177 | DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ |
| 178 | DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ |
| 179 | DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ |
| 180 | DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ |
| 181 | DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ |
| 182 | DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 183 | >; |
| 184 | }; |
| 185 | |
| 186 | mmc2_pins_default: mmc2_pins_default { |
| 187 | pinctrl-single,pins = < |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 188 | DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ |
| 189 | DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ |
| 190 | DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ |
| 191 | DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ |
| 192 | DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ |
| 193 | DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ |
| 194 | DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ |
| 195 | DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ |
| 196 | DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ |
| 197 | DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 198 | >; |
| 199 | }; |
| 200 | |
| 201 | dcan1_pins_default: dcan1_pins_default { |
| 202 | pinctrl-single,pins = < |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 203 | DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ |
| 204 | DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 205 | >; |
| 206 | }; |
| 207 | |
| 208 | dcan1_pins_sleep: dcan1_pins_sleep { |
| 209 | pinctrl-single,pins = < |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 210 | DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ |
| 211 | DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 212 | >; |
| 213 | }; |
| 214 | }; |
| 215 | |
| 216 | &i2c1 { |
| 217 | status = "okay"; |
| 218 | clock-frequency = <400000>; |
| 219 | |
Lokesh Vutla | cfa23a4 | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 220 | pcf_lcd: gpio@20 { |
| 221 | compatible = "nxp,pcf8575"; |
| 222 | reg = <0x20>; |
| 223 | gpio-controller; |
| 224 | #gpio-cells = <2>; |
| 225 | interrupt-controller; |
| 226 | #interrupt-cells = <2>; |
| 227 | }; |
| 228 | |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 229 | pcf_gpio_21: gpio@21 { |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 230 | compatible = "ti,pcf8575", "nxp,pcf8575"; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 231 | reg = <0x21>; |
| 232 | lines-initial-states = <0x1408>; |
| 233 | gpio-controller; |
| 234 | #gpio-cells = <2>; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 235 | interrupt-controller; |
| 236 | #interrupt-cells = <2>; |
| 237 | }; |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 238 | |
| 239 | tlv320aic3106: tlv320aic3106@19 { |
| 240 | #sound-dai-cells = <0>; |
| 241 | compatible = "ti,tlv320aic3106"; |
| 242 | reg = <0x19>; |
| 243 | adc-settle-ms = <40>; |
| 244 | ai3x-micbias-vg = <1>; /* 2.0V */ |
| 245 | status = "okay"; |
| 246 | |
| 247 | /* Regulators */ |
| 248 | AVDD-supply = <&evm_3v3_sw>; |
| 249 | IOVDD-supply = <&evm_3v3_sw>; |
| 250 | DRVDD-supply = <&evm_3v3_sw>; |
| 251 | DVDD-supply = <&aic_dvdd>; |
| 252 | }; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 253 | }; |
| 254 | |
| 255 | &i2c5 { |
| 256 | status = "okay"; |
| 257 | clock-frequency = <400000>; |
| 258 | |
| 259 | pcf_hdmi: pcf8575@26 { |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 260 | compatible = "ti,pcf8575", "nxp,pcf8575"; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 261 | reg = <0x26>; |
| 262 | gpio-controller; |
| 263 | #gpio-cells = <2>; |
| 264 | /* |
| 265 | * initial state is used here to keep the mdio interface |
| 266 | * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and |
| 267 | * VIN2_S0 driven high otherwise Ethernet stops working |
| 268 | * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 |
| 269 | */ |
| 270 | lines-initial-states = <0x0f2b>; |
| 271 | |
Andrew Davis | 0429d3f | 2023-04-11 13:25:06 -0500 | [diff] [blame^] | 272 | hdmi-audio-hog { |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 273 | /* vin6_sel_s0: high: VIN6, low: audio */ |
| 274 | gpio-hog; |
| 275 | gpios = <1 GPIO_ACTIVE_HIGH>; |
| 276 | output-low; |
| 277 | line-name = "vin6_sel_s0"; |
| 278 | }; |
| 279 | }; |
| 280 | }; |
| 281 | |
| 282 | &uart1 { |
| 283 | status = "okay"; |
| 284 | interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, |
| 285 | <&dra7_pmx_core 0x3e0>; |
| 286 | }; |
| 287 | |
| 288 | &elm { |
| 289 | status = "okay"; |
| 290 | }; |
| 291 | |
| 292 | &gpmc { |
Lokesh Vutla | cfa23a4 | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 293 | /* |
| 294 | * For the existing IOdelay configuration via U-Boot we don't |
| 295 | * support NAND on dra72-evm. Keep it disabled. Enabling it |
| 296 | * requires a different configuration by U-Boot. |
| 297 | */ |
| 298 | status = "disabled"; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 299 | ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ |
| 300 | nand@0,0 { |
| 301 | /* To use NAND, DIP switch SW5 must be set like so: |
| 302 | * SW5.1 (NAND_SELn) = ON (LOW) |
| 303 | * SW5.9 (GPMC_WPN) = OFF (HIGH) |
| 304 | */ |
| 305 | compatible = "ti,omap2-nand"; |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 306 | reg = <0 0 4>; /* device IO registers */ |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 307 | interrupt-parent = <&gpmc>; |
| 308 | interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 309 | <1 IRQ_TYPE_NONE>; /* termcount */ |
| 310 | rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ |
Lokesh Vutla | cfa23a4 | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 311 | ti,nand-xfer-type = "prefetch-dma"; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 312 | ti,nand-ecc-opt = "bch8"; |
| 313 | ti,elm-id = <&elm>; |
| 314 | nand-bus-width = <16>; |
| 315 | gpmc,device-width = <2>; |
| 316 | gpmc,sync-clk-ps = <0>; |
| 317 | gpmc,cs-on-ns = <0>; |
| 318 | gpmc,cs-rd-off-ns = <80>; |
| 319 | gpmc,cs-wr-off-ns = <80>; |
| 320 | gpmc,adv-on-ns = <0>; |
| 321 | gpmc,adv-rd-off-ns = <60>; |
| 322 | gpmc,adv-wr-off-ns = <60>; |
| 323 | gpmc,we-on-ns = <10>; |
| 324 | gpmc,we-off-ns = <50>; |
| 325 | gpmc,oe-on-ns = <4>; |
| 326 | gpmc,oe-off-ns = <40>; |
| 327 | gpmc,access-ns = <40>; |
| 328 | gpmc,wr-access-ns = <80>; |
| 329 | gpmc,rd-cycle-ns = <80>; |
| 330 | gpmc,wr-cycle-ns = <80>; |
| 331 | gpmc,bus-turnaround-ns = <0>; |
| 332 | gpmc,cycle2cycle-delay-ns = <0>; |
| 333 | gpmc,clk-activation-ns = <0>; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 334 | gpmc,wr-data-mux-bus-ns = <0>; |
| 335 | /* MTD partition table */ |
| 336 | /* All SPL-* partitions are sized to minimal length |
| 337 | * which can be independently programmable. For |
| 338 | * NAND flash this is equal to size of erase-block */ |
| 339 | #address-cells = <1>; |
| 340 | #size-cells = <1>; |
| 341 | partition@0 { |
| 342 | label = "NAND.SPL"; |
Andrew Davis | 0429d3f | 2023-04-11 13:25:06 -0500 | [diff] [blame^] | 343 | reg = <0x00000000 0x00020000>; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 344 | }; |
| 345 | partition@1 { |
| 346 | label = "NAND.SPL.backup1"; |
| 347 | reg = <0x00020000 0x00020000>; |
| 348 | }; |
| 349 | partition@2 { |
| 350 | label = "NAND.SPL.backup2"; |
| 351 | reg = <0x00040000 0x00020000>; |
| 352 | }; |
| 353 | partition@3 { |
| 354 | label = "NAND.SPL.backup3"; |
| 355 | reg = <0x00060000 0x00020000>; |
| 356 | }; |
| 357 | partition@4 { |
| 358 | label = "NAND.u-boot-spl-os"; |
| 359 | reg = <0x00080000 0x00040000>; |
| 360 | }; |
| 361 | partition@5 { |
| 362 | label = "NAND.u-boot"; |
| 363 | reg = <0x000c0000 0x00100000>; |
| 364 | }; |
| 365 | partition@6 { |
| 366 | label = "NAND.u-boot-env"; |
| 367 | reg = <0x001c0000 0x00020000>; |
| 368 | }; |
| 369 | partition@7 { |
| 370 | label = "NAND.u-boot-env.backup1"; |
| 371 | reg = <0x001e0000 0x00020000>; |
| 372 | }; |
| 373 | partition@8 { |
| 374 | label = "NAND.kernel"; |
| 375 | reg = <0x00200000 0x00800000>; |
| 376 | }; |
| 377 | partition@9 { |
| 378 | label = "NAND.file-system"; |
| 379 | reg = <0x00a00000 0x0f600000>; |
| 380 | }; |
| 381 | }; |
| 382 | }; |
| 383 | |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 384 | &omap_dwc3_1 { |
| 385 | extcon = <&extcon_usb1>; |
| 386 | }; |
| 387 | |
| 388 | &omap_dwc3_2 { |
| 389 | extcon = <&extcon_usb2>; |
| 390 | }; |
| 391 | |
| 392 | &usb1 { |
Lokesh Vutla | cfa23a4 | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 393 | dr_mode = "otg"; |
| 394 | extcon = <&extcon_usb1>; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 395 | }; |
| 396 | |
| 397 | &usb2 { |
| 398 | dr_mode = "host"; |
| 399 | }; |
| 400 | |
| 401 | &mmc1 { |
| 402 | status = "okay"; |
| 403 | pinctrl-names = "default"; |
| 404 | pinctrl-0 = <&mmc1_pins_default>; |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 405 | vmmc-supply = <&evm_3v3_sd>; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 406 | bus-width = <4>; |
| 407 | /* |
| 408 | * SDCD signal is not being used here - using the fact that GPIO mode |
| 409 | * is a viable alternative |
| 410 | */ |
| 411 | cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; |
| 412 | max-frequency = <192000000>; |
| 413 | }; |
| 414 | |
| 415 | &mmc2 { |
| 416 | /* SW5-3 in ON position */ |
| 417 | status = "okay"; |
| 418 | pinctrl-names = "default"; |
| 419 | pinctrl-0 = <&mmc2_pins_default>; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 420 | bus-width = <8>; |
| 421 | ti,non-removable; |
| 422 | max-frequency = <192000000>; |
| 423 | }; |
| 424 | |
| 425 | &mac { |
| 426 | status = "okay"; |
| 427 | }; |
| 428 | |
| 429 | &dcan1 { |
Roger Quadros | 0ffbc74 | 2021-08-24 14:07:27 +0300 | [diff] [blame] | 430 | status = "okay"; |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 431 | pinctrl-names = "default", "sleep", "active"; |
| 432 | pinctrl-0 = <&dcan1_pins_sleep>; |
| 433 | pinctrl-1 = <&dcan1_pins_sleep>; |
| 434 | pinctrl-2 = <&dcan1_pins_default>; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 435 | }; |
| 436 | |
| 437 | &qspi { |
| 438 | status = "okay"; |
| 439 | |
| 440 | spi-max-frequency = <76800000>; |
Andrew Davis | 0429d3f | 2023-04-11 13:25:06 -0500 | [diff] [blame^] | 441 | flash@0 { |
Lokesh Vutla | cfa23a4 | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 442 | compatible = "s25fl256s1"; |
Vignesh R | 31de608 | 2016-11-05 16:05:15 +0530 | [diff] [blame] | 443 | spi-max-frequency = <76800000>; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 444 | reg = <0>; |
| 445 | spi-tx-bus-width = <1>; |
| 446 | spi-rx-bus-width = <4>; |
| 447 | #address-cells = <1>; |
| 448 | #size-cells = <1>; |
| 449 | |
| 450 | /* MTD partition table. |
| 451 | * The ROM checks the first four physical blocks |
| 452 | * for a valid file to boot and the flash here is |
| 453 | * 64KiB block size. |
| 454 | */ |
| 455 | partition@0 { |
| 456 | label = "QSPI.SPL"; |
Andrew Davis | 0429d3f | 2023-04-11 13:25:06 -0500 | [diff] [blame^] | 457 | reg = <0x00000000 0x00010000>; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 458 | }; |
| 459 | partition@1 { |
| 460 | label = "QSPI.SPL.backup1"; |
| 461 | reg = <0x00010000 0x00010000>; |
| 462 | }; |
| 463 | partition@2 { |
| 464 | label = "QSPI.SPL.backup2"; |
| 465 | reg = <0x00020000 0x00010000>; |
| 466 | }; |
| 467 | partition@3 { |
| 468 | label = "QSPI.SPL.backup3"; |
| 469 | reg = <0x00030000 0x00010000>; |
| 470 | }; |
| 471 | partition@4 { |
| 472 | label = "QSPI.u-boot"; |
| 473 | reg = <0x00040000 0x00100000>; |
| 474 | }; |
| 475 | partition@5 { |
| 476 | label = "QSPI.u-boot-spl-os"; |
| 477 | reg = <0x00140000 0x00080000>; |
| 478 | }; |
| 479 | partition@6 { |
| 480 | label = "QSPI.u-boot-env"; |
| 481 | reg = <0x001c0000 0x00010000>; |
| 482 | }; |
| 483 | partition@7 { |
| 484 | label = "QSPI.u-boot-env.backup1"; |
| 485 | reg = <0x001d0000 0x0010000>; |
| 486 | }; |
| 487 | partition@8 { |
| 488 | label = "QSPI.kernel"; |
| 489 | reg = <0x001e0000 0x0800000>; |
| 490 | }; |
| 491 | partition@9 { |
| 492 | label = "QSPI.file-system"; |
| 493 | reg = <0x009e0000 0x01620000>; |
| 494 | }; |
| 495 | }; |
| 496 | }; |
| 497 | |
| 498 | &dss { |
Roger Quadros | 0ffbc74 | 2021-08-24 14:07:27 +0300 | [diff] [blame] | 499 | status = "okay"; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 500 | }; |
| 501 | |
| 502 | &hdmi { |
Roger Quadros | 0ffbc74 | 2021-08-24 14:07:27 +0300 | [diff] [blame] | 503 | status = "okay"; |
Mugunthan V N | b8c6b02 | 2016-09-27 13:01:41 +0530 | [diff] [blame] | 504 | |
| 505 | port { |
| 506 | hdmi_out: endpoint { |
| 507 | remote-endpoint = <&tpd12s015_in>; |
| 508 | }; |
| 509 | }; |
| 510 | }; |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 511 | |
| 512 | &atl { |
| 513 | assigned-clocks = <&abe_dpll_sys_clk_mux>, |
| 514 | <&atl_gfclk_mux>, |
| 515 | <&dpll_abe_ck>, |
| 516 | <&dpll_abe_m2x2_ck>, |
| 517 | <&atl_clkin2_ck>; |
| 518 | assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; |
| 519 | assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; |
| 520 | |
| 521 | status = "okay"; |
| 522 | |
| 523 | atl2 { |
| 524 | bws = <DRA7_ATL_WS_MCASP2_FSX>; |
| 525 | aws = <DRA7_ATL_WS_MCASP3_FSX>; |
| 526 | }; |
| 527 | }; |
| 528 | |
| 529 | &mcasp3 { |
| 530 | #sound-dai-cells = <0>; |
| 531 | |
| 532 | assigned-clocks = <&mcasp3_ahclkx_mux>; |
| 533 | assigned-clock-parents = <&atl_clkin2_ck>; |
| 534 | |
| 535 | status = "okay"; |
| 536 | |
| 537 | op-mode = <0>; /* MCASP_IIS_MODE */ |
| 538 | tdm-slots = <2>; |
| 539 | /* 4 serializer */ |
| 540 | serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ |
| 541 | 1 2 0 0 |
| 542 | >; |
| 543 | tx-num-evt = <32>; |
| 544 | rx-num-evt = <32>; |
| 545 | }; |
| 546 | |
| 547 | &mailbox5 { |
| 548 | status = "okay"; |
Andrew Davis | 0429d3f | 2023-04-11 13:25:06 -0500 | [diff] [blame^] | 549 | mbox_ipu1_ipc3x: mbox-ipu1-ipc3x { |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 550 | status = "okay"; |
| 551 | }; |
Andrew Davis | 0429d3f | 2023-04-11 13:25:06 -0500 | [diff] [blame^] | 552 | mbox_dsp1_ipc3x: mbox-dsp1-ipc3x { |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 553 | status = "okay"; |
| 554 | }; |
| 555 | }; |
| 556 | |
| 557 | &mailbox6 { |
| 558 | status = "okay"; |
Andrew Davis | 0429d3f | 2023-04-11 13:25:06 -0500 | [diff] [blame^] | 559 | mbox_ipu2_ipc3x: mbox-ipu2-ipc3x { |
Lokesh Vutla | da04742 | 2016-11-23 13:25:29 +0530 | [diff] [blame] | 560 | status = "okay"; |
| 561 | }; |
| 562 | }; |
Lokesh Vutla | cfa23a4 | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 563 | |
| 564 | &pcie1_rc { |
| 565 | status = "okay"; |
| 566 | }; |