wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2001 |
| 3 | * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch. |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | * partly derived from |
| 23 | * linux/drivers/scsi/sym53c8xx.c |
| 24 | * |
| 25 | */ |
| 26 | |
| 27 | /* |
| 28 | * SCSI support based on the chip sym53C810. |
| 29 | * |
| 30 | * 09-19-2001 Andreas Heppel, Sysgo RTS GmbH <aheppel@sysgo.de> |
| 31 | * The local version of this driver for the BAB750 board does not |
| 32 | * use interrupts but polls the chip instead (see the call of |
| 33 | * 'handle_scsi_int()' in 'scsi_issue()'. |
| 34 | */ |
| 35 | |
| 36 | #include <common.h> |
| 37 | |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 38 | #include <command.h> |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 39 | #include <pci.h> |
| 40 | #include <asm/processor.h> |
| 41 | #include <sym53c8xx.h> |
| 42 | #include <scsi.h> |
| 43 | |
| 44 | #undef SYM53C8XX_DEBUG |
| 45 | |
| 46 | #ifdef SYM53C8XX_DEBUG |
| 47 | #define PRINTF(fmt,args...) printf (fmt ,##args) |
| 48 | #else |
| 49 | #define PRINTF(fmt,args...) |
| 50 | #endif |
| 51 | |
Jon Loeliger | 82ecaad | 2007-07-09 17:39:42 -0500 | [diff] [blame] | 52 | #if defined(CONFIG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX) |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 53 | |
| 54 | #undef SCSI_SINGLE_STEP |
| 55 | /* |
| 56 | * Single Step is only used for debug purposes |
| 57 | */ |
| 58 | #ifdef SCSI_SINGLE_STEP |
| 59 | static unsigned long start_script_select; |
| 60 | static unsigned long start_script_msgout; |
| 61 | static unsigned long start_script_msgin; |
| 62 | static unsigned long start_script_msg_ext; |
| 63 | static unsigned long start_script_cmd; |
| 64 | static unsigned long start_script_data_in; |
| 65 | static unsigned long start_script_data_out; |
| 66 | static unsigned long start_script_status; |
| 67 | static unsigned long start_script_complete; |
| 68 | static unsigned long start_script_error; |
| 69 | static unsigned long start_script_reselection; |
| 70 | static unsigned int len_script_select; |
| 71 | static unsigned int len_script_msgout; |
| 72 | static unsigned int len_script_msgin; |
| 73 | static unsigned int len_script_msg_ext; |
| 74 | static unsigned int len_script_cmd; |
| 75 | static unsigned int len_script_data_in; |
| 76 | static unsigned int len_script_data_out; |
| 77 | static unsigned int len_script_status; |
| 78 | static unsigned int len_script_complete; |
| 79 | static unsigned int len_script_error; |
| 80 | static unsigned int len_script_reselection; |
| 81 | #endif |
| 82 | |
| 83 | |
Wolfgang Denk | a1be476 | 2008-05-20 16:00:29 +0200 | [diff] [blame] | 84 | static unsigned short scsi_int_mask; /* shadow register for SCSI related interrupts */ |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 85 | static unsigned char script_int_mask; /* shadow register for SCRIPT related interrupts */ |
Wolfgang Denk | a1be476 | 2008-05-20 16:00:29 +0200 | [diff] [blame] | 86 | static unsigned long script_select[8]; /* script for selection */ |
| 87 | static unsigned long script_msgout[8]; /* script for message out phase (NOT USED) */ |
| 88 | static unsigned long script_msgin[14]; /* script for message in phase */ |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 89 | static unsigned long script_msg_ext[32]; /* script for message in phase when more than 1 byte message */ |
| 90 | static unsigned long script_cmd[18]; /* script for command phase */ |
| 91 | static unsigned long script_data_in[8]; /* script for data in phase */ |
| 92 | static unsigned long script_data_out[8]; /* script for data out phase */ |
| 93 | static unsigned long script_status[6]; /* script for status phase */ |
| 94 | static unsigned long script_complete[10]; /* script for complete */ |
| 95 | static unsigned long script_reselection[4]; /* script for reselection (NOT USED) */ |
| 96 | static unsigned long script_error[2]; /* script for error handling */ |
| 97 | |
| 98 | static unsigned long int_stat[3]; /* interrupt status */ |
| 99 | static unsigned long scsi_mem_addr; /* base memory address =SCSI_MEM_ADDRESS; */ |
| 100 | |
| 101 | #define bus_to_phys(a) pci_mem_to_phys(busdevfunc, (unsigned long) (a)) |
| 102 | #define phys_to_bus(a) pci_phys_to_mem(busdevfunc, (unsigned long) (a)) |
| 103 | |
| 104 | #define SCSI_MAX_RETRY 3 /* number of retries in scsi_issue() */ |
| 105 | |
| 106 | #define SCSI_MAX_RETRY_NOT_READY 10 /* number of retries when device is not ready */ |
| 107 | #define SCSI_NOT_READY_TIME_OUT 500 /* timeout per retry when not ready */ |
| 108 | |
| 109 | /********************************************************************************* |
| 110 | * forward declerations |
| 111 | */ |
| 112 | |
| 113 | void scsi_chip_init(void); |
| 114 | void handle_scsi_int(void); |
| 115 | |
| 116 | |
| 117 | /******************************************************************************** |
| 118 | * reports SCSI errors to the user |
| 119 | */ |
Wolfgang Denk | a1be476 | 2008-05-20 16:00:29 +0200 | [diff] [blame] | 120 | void scsi_print_error (ccb * pccb) |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 121 | { |
| 122 | int i; |
Wolfgang Denk | a1be476 | 2008-05-20 16:00:29 +0200 | [diff] [blame] | 123 | |
| 124 | printf ("SCSI Error: Target %d LUN %d Command %02X\n", pccb->target, |
| 125 | pccb->lun, pccb->cmd[0]); |
| 126 | printf (" CCB: "); |
| 127 | for (i = 0; i < pccb->cmdlen; i++) |
| 128 | printf ("%02X ", pccb->cmd[i]); |
| 129 | printf ("(len=%d)\n", pccb->cmdlen); |
| 130 | printf (" Cntrl: "); |
| 131 | switch (pccb->contr_stat) { |
| 132 | case SIR_COMPLETE: |
| 133 | printf ("Complete (no Error)\n"); |
| 134 | break; |
| 135 | case SIR_SEL_ATN_NO_MSG_OUT: |
| 136 | printf ("Selected with ATN no MSG out phase\n"); |
| 137 | break; |
| 138 | case SIR_CMD_OUT_ILL_PH: |
| 139 | printf ("Command out illegal phase\n"); |
| 140 | break; |
| 141 | case SIR_MSG_RECEIVED: |
| 142 | printf ("MSG received Error\n"); |
| 143 | break; |
| 144 | case SIR_DATA_IN_ERR: |
| 145 | printf ("Data in Error\n"); |
| 146 | break; |
| 147 | case SIR_DATA_OUT_ERR: |
| 148 | printf ("Data out Error\n"); |
| 149 | break; |
| 150 | case SIR_SCRIPT_ERROR: |
| 151 | printf ("Script Error\n"); |
| 152 | break; |
| 153 | case SIR_MSG_OUT_NO_CMD: |
| 154 | printf ("MSG out no Command phase\n"); |
| 155 | break; |
| 156 | case SIR_MSG_OVER7: |
| 157 | printf ("MSG in over 7 bytes\n"); |
| 158 | break; |
| 159 | case INT_ON_FY: |
| 160 | printf ("Interrupt on fly\n"); |
| 161 | break; |
| 162 | case SCSI_SEL_TIME_OUT: |
| 163 | printf ("SCSI Selection Timeout\n"); |
| 164 | break; |
| 165 | case SCSI_HNS_TIME_OUT: |
| 166 | printf ("SCSI Handshake Timeout\n"); |
| 167 | break; |
| 168 | case SCSI_MA_TIME_OUT: |
| 169 | printf ("SCSI Phase Error\n"); |
| 170 | break; |
| 171 | case SCSI_UNEXP_DIS: |
| 172 | printf ("SCSI unexpected disconnect\n"); |
| 173 | break; |
| 174 | default: |
| 175 | printf ("unknown status %lx\n", pccb->contr_stat); |
| 176 | break; |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 177 | } |
Wolfgang Denk | a1be476 | 2008-05-20 16:00:29 +0200 | [diff] [blame] | 178 | printf (" Sense: SK %x (", pccb->sense_buf[2] & 0x0f); |
| 179 | switch (pccb->sense_buf[2] & 0xf) { |
| 180 | case SENSE_NO_SENSE: |
| 181 | printf ("No Sense)"); |
| 182 | break; |
| 183 | case SENSE_RECOVERED_ERROR: |
| 184 | printf ("Recovered Error)"); |
| 185 | break; |
| 186 | case SENSE_NOT_READY: |
| 187 | printf ("Not Ready)"); |
| 188 | break; |
| 189 | case SENSE_MEDIUM_ERROR: |
| 190 | printf ("Medium Error)"); |
| 191 | break; |
| 192 | case SENSE_HARDWARE_ERROR: |
| 193 | printf ("Hardware Error)"); |
| 194 | break; |
| 195 | case SENSE_ILLEGAL_REQUEST: |
| 196 | printf ("Illegal request)"); |
| 197 | break; |
| 198 | case SENSE_UNIT_ATTENTION: |
| 199 | printf ("Unit Attention)"); |
| 200 | break; |
| 201 | case SENSE_DATA_PROTECT: |
| 202 | printf ("Data Protect)"); |
| 203 | break; |
| 204 | case SENSE_BLANK_CHECK: |
| 205 | printf ("Blank check)"); |
| 206 | break; |
| 207 | case SENSE_VENDOR_SPECIFIC: |
| 208 | printf ("Vendor specific)"); |
| 209 | break; |
| 210 | case SENSE_COPY_ABORTED: |
| 211 | printf ("Copy aborted)"); |
| 212 | break; |
| 213 | case SENSE_ABORTED_COMMAND: |
| 214 | printf ("Aborted Command)"); |
| 215 | break; |
| 216 | case SENSE_VOLUME_OVERFLOW: |
| 217 | printf ("Volume overflow)"); |
| 218 | break; |
| 219 | case SENSE_MISCOMPARE: |
| 220 | printf ("Misscompare\n"); |
| 221 | break; |
| 222 | default: |
| 223 | printf ("Illegal Sensecode\n"); |
| 224 | break; |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 225 | } |
Wolfgang Denk | a1be476 | 2008-05-20 16:00:29 +0200 | [diff] [blame] | 226 | printf (" ASC %x ASCQ %x\n", pccb->sense_buf[12], |
| 227 | pccb->sense_buf[13]); |
| 228 | printf (" Status: "); |
| 229 | switch (pccb->status) { |
| 230 | case S_GOOD: |
| 231 | printf ("Good\n"); |
| 232 | break; |
| 233 | case S_CHECK_COND: |
| 234 | printf ("Check condition\n"); |
| 235 | break; |
| 236 | case S_COND_MET: |
| 237 | printf ("Condition Met\n"); |
| 238 | break; |
| 239 | case S_BUSY: |
| 240 | printf ("Busy\n"); |
| 241 | break; |
| 242 | case S_INT: |
| 243 | printf ("Intermediate\n"); |
| 244 | break; |
| 245 | case S_INT_COND_MET: |
| 246 | printf ("Intermediate condition met\n"); |
| 247 | break; |
| 248 | case S_CONFLICT: |
| 249 | printf ("Reservation conflict\n"); |
| 250 | break; |
| 251 | case S_TERMINATED: |
| 252 | printf ("Command terminated\n"); |
| 253 | break; |
| 254 | case S_QUEUE_FULL: |
| 255 | printf ("Task set full\n"); |
| 256 | break; |
| 257 | default: |
| 258 | printf ("unknown: %02X\n", pccb->status); |
| 259 | break; |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 260 | } |
| 261 | |
| 262 | } |
| 263 | |
| 264 | |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 265 | /****************************************************************************** |
| 266 | * sets-up the SCSI controller |
| 267 | * the base memory address is retrived via the pci_read_config_dword |
| 268 | */ |
| 269 | void scsi_low_level_init(int busdevfunc) |
| 270 | { |
| 271 | unsigned int cmd; |
| 272 | unsigned int addr; |
| 273 | unsigned char vec; |
| 274 | |
| 275 | pci_read_config_byte(busdevfunc, PCI_INTERRUPT_LINE, &vec); |
| 276 | pci_read_config_dword(busdevfunc, PCI_BASE_ADDRESS_1, &addr); |
| 277 | |
| 278 | addr = bus_to_phys(addr & ~0xf); |
| 279 | |
| 280 | /* |
| 281 | * Enable bus mastering in case this has not been done, yet. |
| 282 | */ |
| 283 | pci_read_config_dword(busdevfunc, PCI_COMMAND, &cmd); |
| 284 | cmd |= PCI_COMMAND_MASTER; |
| 285 | pci_write_config_dword(busdevfunc, PCI_COMMAND, cmd); |
| 286 | |
| 287 | scsi_mem_addr = addr; |
| 288 | |
| 289 | scsi_chip_init(); |
| 290 | scsi_bus_reset(); |
| 291 | } |
| 292 | |
| 293 | |
| 294 | /************************************************************************************ |
| 295 | * Low level Part of SCSI Driver |
| 296 | */ |
| 297 | |
| 298 | /* |
| 299 | * big-endian -> little endian conversion for the script |
| 300 | */ |
| 301 | unsigned long swap_script(unsigned long val) |
| 302 | { |
| 303 | unsigned long tmp; |
| 304 | tmp = ((val>>24)&0xff) | ((val>>8)&0xff00) | ((val<<8)&0xff0000) | ((val<<24)&0xff000000); |
| 305 | return tmp; |
| 306 | } |
| 307 | |
| 308 | |
| 309 | void scsi_write_byte(ulong offset,unsigned char val) |
| 310 | { |
| 311 | out8(scsi_mem_addr+offset,val); |
| 312 | } |
| 313 | |
| 314 | |
| 315 | unsigned char scsi_read_byte(ulong offset) |
| 316 | { |
| 317 | return(in8(scsi_mem_addr+offset)); |
| 318 | } |
| 319 | |
| 320 | |
| 321 | /******************************************************************************** |
| 322 | * interrupt handler |
| 323 | */ |
| 324 | void handle_scsi_int(void) |
| 325 | { |
| 326 | unsigned char stat,stat1,stat2; |
| 327 | unsigned short sstat; |
| 328 | int i; |
| 329 | #ifdef SCSI_SINGLE_STEP |
| 330 | unsigned long tt; |
| 331 | #endif |
| 332 | stat=scsi_read_byte(ISTAT); |
| 333 | if((stat & DIP)==DIP) { /* DMA Interrupt pending */ |
| 334 | stat1=scsi_read_byte(DSTAT); |
| 335 | #ifdef SCSI_SINGLE_STEP |
Wolfgang Denk | a1be476 | 2008-05-20 16:00:29 +0200 | [diff] [blame] | 336 | if((stat1 & SSI)==SSI) { |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 337 | tt=in32r(scsi_mem_addr+DSP); |
| 338 | if(((tt)>=start_script_select) && ((tt)<start_script_select+len_script_select)) { |
| 339 | printf("select %d\n",(tt-start_script_select)>>2); |
| 340 | goto end_single; |
| 341 | } |
| 342 | if(((tt)>=start_script_msgout) && ((tt)<start_script_msgout+len_script_msgout)) { |
| 343 | printf("msgout %d\n",(tt-start_script_msgout)>>2); |
| 344 | goto end_single; |
| 345 | } |
| 346 | if(((tt)>=start_script_msgin) && ((tt)<start_script_msgin+len_script_msgin)) { |
| 347 | printf("msgin %d\n",(tt-start_script_msgin)>>2); |
| 348 | goto end_single; |
| 349 | } |
| 350 | if(((tt)>=start_script_msg_ext) && ((tt)<start_script_msg_ext+len_script_msg_ext)) { |
| 351 | printf("msgin_ext %d\n",(tt-start_script_msg_ext)>>2); |
| 352 | goto end_single; |
| 353 | } |
| 354 | if(((tt)>=start_script_cmd) && ((tt)<start_script_cmd+len_script_cmd)) { |
| 355 | printf("cmd %d\n",(tt-start_script_cmd)>>2); |
| 356 | goto end_single; |
| 357 | } |
| 358 | if(((tt)>=start_script_data_in) && ((tt)<start_script_data_in+len_script_data_in)) { |
| 359 | printf("data_in %d\n",(tt-start_script_data_in)>>2); |
| 360 | goto end_single; |
| 361 | } |
| 362 | if(((tt)>=start_script_data_out) && ((tt)<start_script_data_out+len_script_data_out)) { |
| 363 | printf("data_out %d\n",(tt-start_script_data_out)>>2); |
| 364 | goto end_single; |
| 365 | } |
| 366 | if(((tt)>=start_script_status) && ((tt)<start_script_status+len_script_status)) { |
| 367 | printf("status %d\n",(tt-start_script_status)>>2); |
| 368 | goto end_single; |
| 369 | } |
| 370 | if(((tt)>=start_script_complete) && ((tt)<start_script_complete+len_script_complete)) { |
| 371 | printf("complete %d\n",(tt-start_script_complete)>>2); |
| 372 | goto end_single; |
| 373 | } |
| 374 | if(((tt)>=start_script_error) && ((tt)<start_script_error+len_script_error)) { |
| 375 | printf("error %d\n",(tt-start_script_error)>>2); |
| 376 | goto end_single; |
| 377 | } |
| 378 | if(((tt)>=start_script_reselection) && ((tt)<start_script_reselection+len_script_reselection)) { |
| 379 | printf("reselection %d\n",(tt-start_script_reselection)>>2); |
| 380 | goto end_single; |
| 381 | } |
| 382 | printf("sc: %lx\n",tt); |
| 383 | end_single: |
| 384 | stat2=scsi_read_byte(DCNTL); |
| 385 | stat2|=STD; |
| 386 | scsi_write_byte(DCNTL,stat2); |
| 387 | } |
| 388 | #endif |
| 389 | if((stat1 & SIR)==SIR) /* script interrupt */ |
| 390 | { |
| 391 | int_stat[0]=in32(scsi_mem_addr+DSPS); |
| 392 | } |
| 393 | if((stat1 & DFE)==0) { /* fifo not epmty */ |
| 394 | scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */ |
| 395 | stat2=scsi_read_byte(STEST3); |
| 396 | scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */ |
| 397 | } |
| 398 | } |
| 399 | if((stat & SIP)==SIP) { /* scsi interrupt */ |
| 400 | sstat = (unsigned short)scsi_read_byte(SIST+1); |
| 401 | sstat <<=8; |
| 402 | sstat |= (unsigned short)scsi_read_byte(SIST); |
| 403 | for(i=0;i<3;i++) { |
| 404 | if(int_stat[i]==0) |
| 405 | break; /* found an empty int status */ |
| 406 | } |
| 407 | int_stat[i]=SCSI_INT_STATE | sstat; |
| 408 | stat1=scsi_read_byte(DSTAT); |
| 409 | if((stat1 & DFE)==0) { /* fifo not epmty */ |
| 410 | scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */ |
| 411 | stat2=scsi_read_byte(STEST3); |
| 412 | scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */ |
| 413 | } |
| 414 | } |
| 415 | if((stat & INTF)==INTF) { /* interrupt on Fly */ |
| 416 | scsi_write_byte(ISTAT,stat); /* clear it */ |
| 417 | for(i=0;i<3;i++) { |
| 418 | if(int_stat[i]==0) |
| 419 | break; /* found an empty int status */ |
| 420 | } |
| 421 | int_stat[i]=INT_ON_FY; |
| 422 | } |
| 423 | } |
| 424 | |
| 425 | void scsi_bus_reset(void) |
| 426 | { |
| 427 | unsigned char t; |
| 428 | int i; |
| 429 | int end = CFG_SCSI_SPIN_UP_TIME*1000; |
| 430 | |
| 431 | t=scsi_read_byte(SCNTL1); |
| 432 | scsi_write_byte(SCNTL1,(t | CRST)); |
| 433 | udelay(50); |
| 434 | scsi_write_byte(SCNTL1,t); |
| 435 | |
| 436 | puts("waiting for devices to spin up"); |
| 437 | for(i=0;i<end;i++) { |
| 438 | udelay(1000); /* give the devices time to spin up */ |
| 439 | if (i % 1000 == 0) |
| 440 | putc('.'); |
| 441 | } |
| 442 | putc('\n'); |
| 443 | scsi_chip_init(); /* reinit the chip ...*/ |
| 444 | |
| 445 | } |
| 446 | |
| 447 | void scsi_int_enable(void) |
| 448 | { |
| 449 | scsi_write_byte(SIEN,(unsigned char)scsi_int_mask); |
| 450 | scsi_write_byte(SIEN+1,(unsigned char)(scsi_int_mask>>8)); |
| 451 | scsi_write_byte(DIEN,script_int_mask); |
| 452 | } |
| 453 | |
| 454 | void scsi_write_dsp(unsigned long start) |
| 455 | { |
| 456 | unsigned long val; |
| 457 | #ifdef SCSI_SINGLE_STEP |
| 458 | unsigned char t; |
| 459 | #endif |
| 460 | val = start; |
| 461 | out32r(scsi_mem_addr + DSP,start); |
| 462 | #ifdef SCSI_SINGLE_STEP |
| 463 | t=scsi_read_byte(DCNTL); |
| 464 | t|=STD; |
| 465 | scsi_write_byte(DCNTL,t); |
| 466 | #endif |
| 467 | } |
| 468 | |
| 469 | /* only used for debug purposes */ |
| 470 | void scsi_print_script(void) |
| 471 | { |
| 472 | printf("script_select @ 0x%08lX\n",(unsigned long)&script_select[0]); |
| 473 | printf("script_msgout @ 0x%08lX\n",(unsigned long)&script_msgout[0]); |
| 474 | printf("script_msgin @ 0x%08lX\n",(unsigned long)&script_msgin[0]); |
| 475 | printf("script_msgext @ 0x%08lX\n",(unsigned long)&script_msg_ext[0]); |
| 476 | printf("script_cmd @ 0x%08lX\n",(unsigned long)&script_cmd[0]); |
| 477 | printf("script_data_in @ 0x%08lX\n",(unsigned long)&script_data_in[0]); |
| 478 | printf("script_data_out @ 0x%08lX\n",(unsigned long)&script_data_out[0]); |
| 479 | printf("script_status @ 0x%08lX\n",(unsigned long)&script_status[0]); |
| 480 | printf("script_complete @ 0x%08lX\n",(unsigned long)&script_complete[0]); |
| 481 | printf("script_error @ 0x%08lX\n",(unsigned long)&script_error[0]); |
| 482 | } |
| 483 | |
| 484 | |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 485 | void scsi_set_script(ccb *pccb) |
| 486 | { |
| 487 | int busdevfunc = pccb->priv; |
| 488 | int i; |
| 489 | i=0; |
| 490 | script_select[i++]=swap_script(SCR_REG_REG(GPREG, SCR_AND, 0xfe)); |
| 491 | script_select[i++]=0; /* LED ON */ |
| 492 | script_select[i++]=swap_script(SCR_CLR(SCR_TRG)); /* select initiator mode */ |
| 493 | script_select[i++]=0; |
| 494 | /* script_select[i++]=swap_script(SCR_SEL_ABS_ATN | pccb->target << 16); */ |
| 495 | script_select[i++]=swap_script(SCR_SEL_ABS | pccb->target << 16); |
| 496 | script_select[i++]=swap_script(phys_to_bus(&script_cmd[4])); /* error handling */ |
| 497 | script_select[i++]=swap_script(SCR_JUMP); /* next section */ |
| 498 | /* script_select[i++]=swap_script((unsigned long)&script_msgout[0]); */ /* message out */ |
| 499 | script_select[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* command out */ |
| 500 | |
| 501 | #ifdef SCSI_SINGLE_STEP |
| 502 | start_script_select=(unsigned long)&script_select[0]; |
| 503 | len_script_select=i*4; |
| 504 | #endif |
| 505 | |
| 506 | i=0; |
| 507 | script_msgout[i++]=swap_script(SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT))); |
| 508 | script_msgout[i++]=SIR_SEL_ATN_NO_MSG_OUT; |
| 509 | script_msgout[i++]=swap_script( SCR_MOVE_ABS(1) ^ SCR_MSG_OUT); |
| 510 | script_msgout[i++]=swap_script(phys_to_bus(&pccb->msgout[0])); |
| 511 | script_msgout[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_COMMAND))); /* if Command phase */ |
| 512 | script_msgout[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* switch to command */ |
| 513 | script_msgout[i++]=swap_script(SCR_INT); /* interrupt if not */ |
| 514 | script_msgout[i++]=SIR_MSG_OUT_NO_CMD; |
| 515 | |
| 516 | #ifdef SCSI_SINGLE_STEP |
| 517 | start_script_msgout=(unsigned long)&script_msgout[0]; |
| 518 | len_script_msgout=i*4; |
| 519 | #endif |
| 520 | i=0; |
| 521 | script_cmd[i++]=swap_script(SCR_MOVE_ABS(pccb->cmdlen) ^ SCR_COMMAND); |
| 522 | script_cmd[i++]=swap_script(phys_to_bus(&pccb->cmd[0])); |
| 523 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); /* message in ? */ |
| 524 | script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0])); |
| 525 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT))); /* data out ? */ |
| 526 | script_cmd[i++]=swap_script(phys_to_bus(&script_data_out[0])); |
| 527 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN))); /* data in ? */ |
| 528 | script_cmd[i++]=swap_script(phys_to_bus(&script_data_in[0])); |
| 529 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_STATUS))); /* status ? */ |
| 530 | script_cmd[i++]=swap_script(phys_to_bus(&script_status[0])); |
| 531 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND))); /* command ? */ |
| 532 | script_cmd[i++]=swap_script(phys_to_bus(&script_cmd[0])); |
| 533 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT))); /* message out ? */ |
| 534 | script_cmd[i++]=swap_script(phys_to_bus(&script_msgout[0])); |
| 535 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN))); /* just for error handling message in ? */ |
| 536 | script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0])); |
| 537 | script_cmd[i++]=swap_script(SCR_INT); /* interrupt if not */ |
| 538 | script_cmd[i++]=SIR_CMD_OUT_ILL_PH; |
| 539 | #ifdef SCSI_SINGLE_STEP |
| 540 | start_script_cmd=(unsigned long)&script_cmd[0]; |
| 541 | len_script_cmd=i*4; |
| 542 | #endif |
| 543 | i=0; |
| 544 | script_data_out[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_OUT); /* move */ |
| 545 | script_data_out[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */ |
| 546 | script_data_out[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS))); |
| 547 | script_data_out[i++]=swap_script(phys_to_bus(&script_status[0])); |
| 548 | script_data_out[i++]=swap_script(SCR_INT); |
| 549 | script_data_out[i++]=SIR_DATA_OUT_ERR; |
| 550 | |
| 551 | #ifdef SCSI_SINGLE_STEP |
| 552 | start_script_data_out=(unsigned long)&script_data_out[0]; |
| 553 | len_script_data_out=i*4; |
| 554 | #endif |
| 555 | i=0; |
| 556 | script_data_in[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_IN); /* move */ |
| 557 | script_data_in[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */ |
| 558 | script_data_in[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS))); |
| 559 | script_data_in[i++]=swap_script(phys_to_bus(&script_status[0])); |
| 560 | script_data_in[i++]=swap_script(SCR_INT); |
| 561 | script_data_in[i++]=SIR_DATA_IN_ERR; |
| 562 | #ifdef SCSI_SINGLE_STEP |
| 563 | start_script_data_in=(unsigned long)&script_data_in[0]; |
| 564 | len_script_data_in=i*4; |
| 565 | #endif |
| 566 | i=0; |
| 567 | script_msgin[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); |
| 568 | script_msgin[i++]=swap_script(phys_to_bus(&pccb->msgin[0])); |
| 569 | script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE))); |
| 570 | script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| 571 | script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT))); |
| 572 | script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| 573 | script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP))); |
| 574 | script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| 575 | script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP))); |
| 576 | script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| 577 | script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED))); |
| 578 | script_msgin[i++]=swap_script(phys_to_bus(&script_msg_ext[0])); |
| 579 | script_msgin[i++]=swap_script(SCR_INT); |
| 580 | script_msgin[i++]=SIR_MSG_RECEIVED; |
| 581 | #ifdef SCSI_SINGLE_STEP |
| 582 | start_script_msgin=(unsigned long)&script_msgin[0]; |
| 583 | len_script_msgin=i*4; |
| 584 | #endif |
| 585 | i=0; |
| 586 | script_msg_ext[i++]=swap_script(SCR_CLR (SCR_ACK)); /* clear ACK */ |
| 587 | script_msg_ext[i++]=0; |
| 588 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* assuming this is the msg length */ |
| 589 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[1])); |
| 590 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 591 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 592 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 593 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[2])); |
| 594 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 595 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 596 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 597 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[3])); |
| 598 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 599 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 600 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 601 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[4])); |
| 602 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 603 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 604 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 605 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[5])); |
| 606 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 607 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 608 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 609 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[6])); |
| 610 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 611 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 612 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 613 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[7])); |
| 614 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 615 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 616 | script_msg_ext[i++]=swap_script(SCR_INT); |
| 617 | script_msg_ext[i++]=SIR_MSG_OVER7; |
| 618 | #ifdef SCSI_SINGLE_STEP |
| 619 | start_script_msg_ext=(unsigned long)&script_msg_ext[0]; |
| 620 | len_script_msg_ext=i*4; |
| 621 | #endif |
| 622 | i=0; |
| 623 | script_status[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_STATUS); |
| 624 | script_status[i++]=swap_script(phys_to_bus(&pccb->status)); |
| 625 | script_status[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); |
| 626 | script_status[i++]=swap_script(phys_to_bus(&script_msgin[0])); |
| 627 | script_status[i++]=swap_script(SCR_INT); |
| 628 | script_status[i++]=SIR_STATUS_ILL_PH; |
| 629 | #ifdef SCSI_SINGLE_STEP |
| 630 | start_script_status=(unsigned long)&script_status[0]; |
| 631 | len_script_status=i*4; |
| 632 | #endif |
| 633 | i=0; |
| 634 | script_complete[i++]=swap_script(SCR_REG_REG (SCNTL2, SCR_AND, 0x7f)); |
| 635 | script_complete[i++]=0; |
| 636 | script_complete[i++]=swap_script(SCR_CLR (SCR_ACK|SCR_ATN)); |
| 637 | script_complete[i++]=0; |
| 638 | script_complete[i++]=swap_script(SCR_WAIT_DISC); |
| 639 | script_complete[i++]=0; |
| 640 | script_complete[i++]=swap_script(SCR_REG_REG(GPREG, SCR_OR, 0x01)); |
| 641 | script_complete[i++]=0; /* LED OFF */ |
| 642 | script_complete[i++]=swap_script(SCR_INT); |
| 643 | script_complete[i++]=SIR_COMPLETE; |
| 644 | #ifdef SCSI_SINGLE_STEP |
| 645 | start_script_complete=(unsigned long)&script_complete[0]; |
| 646 | len_script_complete=i*4; |
| 647 | #endif |
| 648 | i=0; |
| 649 | script_error[i++]=swap_script(SCR_INT); /* interrupt if error */ |
| 650 | script_error[i++]=SIR_SCRIPT_ERROR; |
| 651 | #ifdef SCSI_SINGLE_STEP |
| 652 | start_script_error=(unsigned long)&script_error[0]; |
| 653 | len_script_error=i*4; |
| 654 | #endif |
| 655 | i=0; |
| 656 | script_reselection[i++]=swap_script(SCR_CLR (SCR_TRG)); /* target status */ |
| 657 | script_reselection[i++]=0; |
| 658 | script_reselection[i++]=swap_script(SCR_WAIT_RESEL); |
| 659 | script_reselection[i++]=swap_script(phys_to_bus(&script_select[0])); /* len = 4 */ |
| 660 | #ifdef SCSI_SINGLE_STEP |
| 661 | start_script_reselection=(unsigned long)&script_reselection[0]; |
| 662 | len_script_reselection=i*4; |
| 663 | #endif |
| 664 | } |
| 665 | |
| 666 | |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 667 | void scsi_issue(ccb *pccb) |
| 668 | { |
| 669 | int busdevfunc = pccb->priv; |
| 670 | int i; |
| 671 | unsigned short sstat; |
Wolfgang Denk | a1be476 | 2008-05-20 16:00:29 +0200 | [diff] [blame] | 672 | int retrycnt; /* retry counter */ |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 673 | for(i=0;i<3;i++) |
| 674 | int_stat[i]=0; /* delete all int status */ |
| 675 | /* struct pccb must be set-up correctly */ |
| 676 | retrycnt=0; |
| 677 | PRINTF("ID %d issue cmd %02X\n",pccb->target,pccb->cmd[0]); |
| 678 | pccb->trans_bytes=0; /* no bytes transfered yet */ |
| 679 | scsi_set_script(pccb); /* fill in SCRIPT */ |
| 680 | scsi_int_mask=STO | UDC | MA; /* | CMP; / * Interrupts which are enabled */ |
| 681 | script_int_mask=0xff; /* enable all Ints */ |
| 682 | scsi_int_enable(); |
| 683 | scsi_write_dsp(phys_to_bus(&script_select[0])); /* start script */ |
| 684 | /* now we have to wait for IRQs */ |
| 685 | retry: |
| 686 | /* |
| 687 | * This version of the driver is _not_ interrupt driven, |
| 688 | * but polls the chip's interrupt registers (ISTAT, DSTAT). |
| 689 | */ |
| 690 | while(int_stat[0]==0) |
| 691 | handle_scsi_int(); |
| 692 | |
| 693 | if(int_stat[0]==SIR_COMPLETE) { |
| 694 | if(pccb->msgin[0]==M_DISCONNECT) { |
| 695 | PRINTF("Wait for reselection\n"); |
| 696 | for(i=0;i<3;i++) |
| 697 | int_stat[i]=0; /* delete all int status */ |
| 698 | scsi_write_dsp(phys_to_bus(&script_reselection[0])); /* start reselection script */ |
| 699 | goto retry; |
| 700 | } |
| 701 | pccb->contr_stat=SIR_COMPLETE; |
| 702 | return; |
| 703 | } |
| 704 | if((int_stat[0] & SCSI_INT_STATE)==SCSI_INT_STATE) { /* scsi interrupt */ |
| 705 | sstat=(unsigned short)int_stat[0]; |
| 706 | if((sstat & STO)==STO) { /* selection timeout */ |
| 707 | pccb->contr_stat=SCSI_SEL_TIME_OUT; |
| 708 | scsi_write_byte(GPREG,0x01); |
| 709 | PRINTF("ID: %X Selection Timeout\n",pccb->target); |
| 710 | return; |
| 711 | } |
| 712 | if((sstat & UDC)==UDC) { /* unexpected disconnect */ |
| 713 | pccb->contr_stat=SCSI_UNEXP_DIS; |
| 714 | scsi_write_byte(GPREG,0x01); |
| 715 | PRINTF("ID: %X Unexpected Disconnect\n",pccb->target); |
| 716 | return; |
| 717 | } |
| 718 | if((sstat & RSL)==RSL) { /* reselection */ |
| 719 | pccb->contr_stat=SCSI_UNEXP_DIS; |
| 720 | scsi_write_byte(GPREG,0x01); |
| 721 | PRINTF("ID: %X Unexpected Disconnect\n",pccb->target); |
| 722 | return; |
| 723 | } |
| 724 | if(((sstat & MA)==MA)||((sstat & HTH)==HTH)) { /* phase missmatch */ |
| 725 | if(retrycnt<SCSI_MAX_RETRY) { |
| 726 | pccb->trans_bytes=pccb->datalen - |
| 727 | ((unsigned long)scsi_read_byte(DBC) | |
| 728 | ((unsigned long)scsi_read_byte(DBC+1)<<8) | |
| 729 | ((unsigned long)scsi_read_byte(DBC+2)<<16)); |
| 730 | for(i=0;i<3;i++) |
| 731 | int_stat[i]=0; /* delete all int status */ |
| 732 | retrycnt++; |
| 733 | PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transfered %lx\n", |
| 734 | pccb->target,retrycnt,scsi_read_byte(SBCL),pccb->trans_bytes); |
| 735 | scsi_write_dsp(phys_to_bus(&script_cmd[4])); /* start retry script */ |
| 736 | goto retry; |
| 737 | } |
| 738 | if((sstat & MA)==MA) |
| 739 | pccb->contr_stat=SCSI_MA_TIME_OUT; |
| 740 | else |
| 741 | pccb->contr_stat=SCSI_HNS_TIME_OUT; |
| 742 | PRINTF("Phase Missmatch stat %lx\n",pccb->contr_stat); |
| 743 | return; |
| 744 | } /* no phase int */ |
| 745 | /* if((sstat & CMP)==CMP) { |
| 746 | pccb->contr_stat=SIR_COMPLETE; |
| 747 | return; |
| 748 | } |
| 749 | */ |
| 750 | PRINTF("SCSI INT %lX\n",int_stat[0]); |
| 751 | pccb->contr_stat=int_stat[0]; |
| 752 | return; |
| 753 | } /* end scsi int */ |
| 754 | PRINTF("SCRIPT INT %lX phase %02X\n",int_stat[0],scsi_read_byte(SBCL)); |
| 755 | pccb->contr_stat=int_stat[0]; |
| 756 | return; |
| 757 | } |
| 758 | |
| 759 | int scsi_exec(ccb *pccb) |
| 760 | { |
| 761 | unsigned char tmpcmd[16],tmpstat; |
| 762 | int i,retrycnt,t; |
| 763 | unsigned long transbytes,datalen; |
| 764 | unsigned char *tmpptr; |
| 765 | retrycnt=0; |
| 766 | retry: |
| 767 | scsi_issue(pccb); |
| 768 | if(pccb->contr_stat!=SIR_COMPLETE) |
| 769 | return FALSE; |
| 770 | if(pccb->status==S_GOOD) |
| 771 | return TRUE; |
| 772 | if(pccb->status==S_CHECK_COND) { /* check condition */ |
| 773 | for(i=0;i<16;i++) |
| 774 | tmpcmd[i]=pccb->cmd[i]; |
| 775 | pccb->cmd[0]=SCSI_REQ_SENSE; |
| 776 | pccb->cmd[1]=pccb->lun<<5; |
| 777 | pccb->cmd[2]=0; |
| 778 | pccb->cmd[3]=0; |
| 779 | pccb->cmd[4]=14; |
| 780 | pccb->cmd[5]=0; |
| 781 | pccb->cmdlen=6; |
| 782 | pccb->msgout[0]=SCSI_IDENTIFY; |
| 783 | transbytes=pccb->trans_bytes; |
| 784 | tmpptr=pccb->pdata; |
Wolfgang Denk | dc770c7 | 2008-07-14 15:19:07 +0200 | [diff] [blame] | 785 | pccb->pdata = &pccb->sense_buf[0]; |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 786 | datalen=pccb->datalen; |
| 787 | pccb->datalen=14; |
| 788 | tmpstat=pccb->status; |
| 789 | scsi_issue(pccb); |
| 790 | for(i=0;i<16;i++) |
| 791 | pccb->cmd[i]=tmpcmd[i]; |
| 792 | pccb->trans_bytes=transbytes; |
| 793 | pccb->pdata=tmpptr; |
| 794 | pccb->datalen=datalen; |
| 795 | pccb->status=tmpstat; |
| 796 | PRINTF("Request_sense sense key %x ASC %x ASCQ %x\n",pccb->sense_buf[2]&0x0f, |
| 797 | pccb->sense_buf[12],pccb->sense_buf[13]); |
| 798 | switch(pccb->sense_buf[2]&0xf) { |
| 799 | case SENSE_NO_SENSE: |
| 800 | case SENSE_RECOVERED_ERROR: |
| 801 | /* seems to be ok */ |
| 802 | return TRUE; |
| 803 | break; |
| 804 | case SENSE_NOT_READY: |
| 805 | if((pccb->sense_buf[12]!=0x04)||(pccb->sense_buf[13]!=0x01)) { |
| 806 | /* if device is not in process of becoming ready */ |
| 807 | return FALSE; |
| 808 | break; |
| 809 | } /* else fall through */ |
| 810 | case SENSE_UNIT_ATTENTION: |
| 811 | if(retrycnt<SCSI_MAX_RETRY_NOT_READY) { |
| 812 | PRINTF("Target %d not ready, retry %d\n",pccb->target,retrycnt); |
| 813 | for(t=0;t<SCSI_NOT_READY_TIME_OUT;t++) |
| 814 | udelay(1000); /* 1sec wait */ |
| 815 | retrycnt++; |
| 816 | goto retry; |
| 817 | } |
| 818 | PRINTF("Target %d not ready, %d retried\n",pccb->target,retrycnt); |
| 819 | return FALSE; |
| 820 | default: |
| 821 | return FALSE; |
| 822 | } |
| 823 | } |
| 824 | PRINTF("Status = %X\n",pccb->status); |
| 825 | return FALSE; |
| 826 | } |
| 827 | |
| 828 | |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 829 | void scsi_chip_init(void) |
| 830 | { |
| 831 | /* first we issue a soft reset */ |
| 832 | scsi_write_byte(ISTAT,SRST); |
| 833 | udelay(1000); |
| 834 | scsi_write_byte(ISTAT,0); |
| 835 | /* setup chip */ |
| 836 | scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */ |
| 837 | scsi_write_byte(SCNTL1,0x00); |
| 838 | scsi_write_byte(SCNTL2,0x00); |
| 839 | #ifndef CFG_SCSI_SYM53C8XX_CCF /* config value for none 40 mhz clocks */ |
| 840 | scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */ |
| 841 | #else |
| 842 | scsi_write_byte(SCNTL3,CFG_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */ |
| 843 | #endif |
| 844 | scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */ |
| 845 | scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */ |
| 846 | scsi_write_byte(SDID,0x00); /* targed SCSI ID = 0 */ |
| 847 | scsi_int_mask=0x0000; /* no Interrupt is enabled */ |
| 848 | script_int_mask=0x00; |
| 849 | scsi_int_enable(); |
| 850 | scsi_write_byte(GPREG,0x01); /* GPIO0 is LED (off) */ |
| 851 | scsi_write_byte(GPCNTL,0x0E); /* GPIO0 is Output */ |
| 852 | scsi_write_byte(STIME0,0x08); /* handshake timer disabled, selection timeout 512msec */ |
| 853 | scsi_write_byte(RESPID,0x80); /* repond only to the own ID (reselection) */ |
| 854 | scsi_write_byte(STEST1,0x00); /* not isolated, SCLK is used */ |
| 855 | scsi_write_byte(STEST2,0x00); /* no Lowlevel Mode? */ |
| 856 | scsi_write_byte(STEST3,0x80); /* enable tolerANT */ |
| 857 | scsi_write_byte(CTEST3,0x04); /* clear FIFO */ |
| 858 | scsi_write_byte(CTEST4,0x00); |
| 859 | scsi_write_byte(CTEST5,0x00); |
| 860 | #ifdef SCSI_SINGLE_STEP |
| 861 | /* scsi_write_byte(DCNTL,IRQM | SSM); */ |
| 862 | scsi_write_byte(DCNTL,IRQD | SSM); |
| 863 | scsi_write_byte(DMODE,MAN); |
| 864 | #else |
| 865 | /* scsi_write_byte(DCNTL,IRQM); */ |
| 866 | scsi_write_byte(DCNTL,IRQD); |
| 867 | scsi_write_byte(DMODE,0x00); |
| 868 | #endif |
| 869 | } |
Jon Loeliger | 82ecaad | 2007-07-09 17:39:42 -0500 | [diff] [blame] | 870 | #endif |