blob: 87db7cae9c16a7d380f0bcaf2deb91a17a947305 [file] [log] [blame]
Horatiu Vultur6dfdd0c2019-01-12 18:56:57 +01001// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2018 Microsemi Corporation
4 */
5
6/ {
7 #address-cells = <1>;
8 #size-cells = <1>;
9 compatible = "mscc,jr2";
10
11 cpus {
12 #address-cells = <1>;
13 #size-cells = <0>;
14
15 cpu@0 {
16 compatible = "mips,mips24KEc";
17 device_type = "cpu";
18 clocks = <&cpu_clk>;
19 reg = <0>;
20 };
21 };
22
23 aliases {
24 serial0 = &uart0;
25 };
26
27 cpuintc: interrupt-controller@0 {
28 #address-cells = <0>;
29 #interrupt-cells = <1>;
30 interrupt-controller;
31 compatible = "mti,cpu-interrupt-controller";
32 };
33
34 cpu_clk: cpu-clock {
35 compatible = "fixed-clock";
36 #clock-cells = <0>;
37 clock-frequency = <500000000>;
38 };
39
40 ahb_clk: ahb-clk {
41 compatible = "fixed-clock";
42 #clock-cells = <0>;
43 clock-frequency = <250000000>;
44 };
45
46 ahb {
47 compatible = "simple-bus";
48 #address-cells = <1>;
49 #size-cells = <1>;
50 ranges = <0 0x70000000 0x2000000>;
51
52 interrupt-parent = <&intc>;
53
54 cpu_ctrl: syscon@0 {
55 compatible = "mscc,jr2-cpu-syscon", "syscon";
56 reg = <0x0 0x2c>;
57 };
58
59 intc: interrupt-controller@70 {
60 compatible = "mscc,jr2-icpu-intr";
61 reg = <0x70 0x94>;
62 #interrupt-cells = <1>;
63 interrupt-controller;
64 interrupt-parent = <&cpuintc>;
65 interrupts = <2>;
66 };
67
68 uart0: serial@100000 {
69 pinctrl-0 = <&uart_pins>;
70 pinctrl-names = "default";
71 compatible = "ns16550a";
72 reg = <0x100000 0x20>;
73 interrupts = <6>;
74 clocks = <&ahb_clk>;
75 reg-io-width = <4>;
76 reg-shift = <2>;
77
78 status = "disabled";
79 };
80
81 uart2: serial@100800 {
82 pinctrl-0 = <&uart2_pins>;
83 pinctrl-names = "default";
84 compatible = "ns16550a";
85 reg = <0x100800 0x20>;
86 interrupts = <7>;
87 clocks = <&ahb_clk>;
88 reg-io-width = <4>;
89 reg-shift = <2>;
90
91 status = "disabled";
92 };
93
94 spi0: spi-master@101000 {
95 #address-cells = <1>;
96 #size-cells = <0>;
Sean Andersonfd9571a2020-10-16 18:57:50 -040097 compatible = "mscc,jaguar2-spi", "snps,dw-apb-ssi";
Horatiu Vultur6dfdd0c2019-01-12 18:56:57 +010098 reg = <0x101000 0x40>;
99 num-chipselect = <4>;
100 bus-num = <0>;
101 reg-io-width = <4>;
102 reg-shift = <2>;
103 spi-max-frequency = <18000000>; /* input clock */
104 clocks = <&ahb_clk>;
105
106 status = "disabled";
107 };
108
109 reset@1010008 {
110 compatible = "mscc,jr2-chip-reset";
111 reg = <0x1010008 0x4>;
112 };
113
114 gpio: pinctrl@1070034 {
115 compatible = "mscc,jaguar2-pinctrl";
116 reg = <0x1010038 0x90>;
117 gpio-controller;
118 #gpio-cells = <2>;
119 gpio-ranges = <&gpio 0 0 64>;
120
121 sgpio_pins: sgpio-pins {
122 pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
123 function = "sg0";
124 };
125
126 sgpio1_pins: sgpio1-pins {
127 pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13";
128 function = "sg1";
129 };
130
131 sgpio2_pins: sgpio2-pins {
132 pins = "GPIO_30", "GPIO_31",
133 "GPIO_32", "GPIO_33";
134 function = "sg2";
135 };
136
137 uart_pins: uart-pins {
138 pins = "GPIO_10", "GPIO_11";
139 function = "uart";
140 };
141
142 uart2_pins: uart2-pins {
143 pins = "GPIO_24", "GPIO_25";
144 function = "uart2";
145 };
146 };
147
148 sgpio: gpio@1010150 {
149 compatible = "mscc,ocelot-sgpio";
150 status = "disabled";
151 pinctrl-0 = <&sgpio_pins>;
152 pinctrl-names = "default";
153 reg = <0x1010150 0x100>;
154 gpio-controller;
155 #gpio-cells = <2>;
156 gpio-ranges = <&sgpio 0 0 64>;
157 gpio-bank-name = "sgpio0_";
158 sgpio-clock = <0x14>;
159 };
160
161 sgpio1: gpio@101025c {
162 compatible = "mscc,ocelot-sgpio";
163 status = "disabled";
164 pinctrl-0 = <&sgpio1_pins>;
165 pinctrl-names = "default";
166 reg = <0x101025c 0x100>;
167 gpio-controller;
168 #gpio-cells = <2>;
169 gpio-ranges = <&sgpio1 0 0 64>;
170 gpio-bank-name = "sgpio1_";
171 sgpio-clock = <0x14>;
172 };
173
174 sgpio2: gpio@1010368 {
175 compatible = "mscc,ocelot-sgpio";
176 status = "disabled";
177 pinctrl-0 = <&sgpio2_pins>;
178 pinctrl-names = "default";
179 reg = <0x1010368 0x100>;
180 gpio-controller;
181 #gpio-cells = <2>;
182 gpio-ranges = <&sgpio2 0 0 64>;
183 gpio-bank-name = "sgpio2_";
184 sgpio-clock = <0x14>;
185 };
Horatiu Vultur3523df12019-04-03 19:54:47 +0200186
187 switch: switch@1010000 {
188 compatible = "mscc,vsc7454-switch";
189 reg = <0x01040000 0x0100>, // VTSS_TO_DEV_0
190 <0x01050000 0x0100>, // VTSS_TO_DEV_1
191 <0x01060000 0x0100>, // VTSS_TO_DEV_2
192 <0x01070000 0x0100>, // VTSS_TO_DEV_3
193 <0x01080000 0x0100>, // VTSS_TO_DEV_4
194 <0x01090000 0x0100>, // VTSS_TO_DEV_5
195 <0x010a0000 0x0100>, // VTSS_TO_DEV_6
196 <0x010b0000 0x0100>, // VTSS_TO_DEV_7
197 <0x010c0000 0x0100>, // VTSS_TO_DEV_8
198 <0x010d0000 0x0100>, // VTSS_TO_DEV_9
199 <0x010e0000 0x0100>, // VTSS_TO_DEV_10
200 <0x010f0000 0x0100>, // VTSS_TO_DEV_11
201 <0x01100000 0x0100>, // VTSS_TO_DEV_12
202 <0x01110000 0x0100>, // VTSS_TO_DEV_13
203 <0x01120000 0x0100>, // VTSS_TO_DEV_14
204 <0x01130000 0x0100>, // VTSS_TO_DEV_15
205 <0x01140000 0x0100>, // VTSS_TO_DEV_16
206 <0x01150000 0x0100>, // VTSS_TO_DEV_17
207 <0x01160000 0x0100>, // VTSS_TO_DEV_18
208 <0x01170000 0x0100>, // VTSS_TO_DEV_19
209 <0x01180000 0x0100>, // VTSS_TO_DEV_20
210 <0x01190000 0x0100>, // VTSS_TO_DEV_21
211 <0x011a0000 0x0100>, // VTSS_TO_DEV_22
212 <0x011b0000 0x0100>, // VTSS_TO_DEV_23
213 <0x011c0000 0x0100>, // VTSS_TO_DEV_24
214 <0x011d0000 0x0100>, // VTSS_TO_DEV_25
215 <0x011e0000 0x0100>, // VTSS_TO_DEV_26
216 <0x011f0000 0x0100>, // VTSS_TO_DEV_27
217 <0x01200000 0x0100>, // VTSS_TO_DEV_28
218 <0x01210000 0x0100>, // VTSS_TO_DEV_29
219 <0x01220000 0x0100>, // VTSS_TO_DEV_30
220 <0x01230000 0x0100>, // VTSS_TO_DEV_31
221 <0x01240000 0x0100>, // VTSS_TO_DEV_32
222 <0x01250000 0x0100>, // VTSS_TO_DEV_33
223 <0x01260000 0x0100>, // VTSS_TO_DEV_34
224 <0x01270000 0x0100>, // VTSS_TO_DEV_35
225 <0x01280000 0x0100>, // VTSS_TO_DEV_36
226 <0x01290000 0x0100>, // VTSS_TO_DEV_37
227 <0x012a0000 0x0100>, // VTSS_TO_DEV_38
228 <0x012b0000 0x0100>, // VTSS_TO_DEV_39
229 <0x012c0000 0x0100>, // VTSS_TO_DEV_40
230 <0x012d0000 0x0100>, // VTSS_TO_DEV_41
231 <0x012e0000 0x0100>, // VTSS_TO_DEV_42
232 <0x012f0000 0x0100>, // VTSS_TO_DEV_43
233 <0x01300000 0x0100>, // VTSS_TO_DEV_44
234 <0x01310000 0x0100>, // VTSS_TO_DEV_45
235 <0x01320000 0x0100>, // VTSS_TO_DEV_46
236 <0x01330000 0x0100>, // VTSS_TO_DEV_47
237 <0x01f00000 0x100000>, // ANA_AC
238 <0x01d00000 0x100000>, // ANA_CL
239 <0x01e00000 0x100000>, // ANA_L2
240 <0x01410000 0x10000>, // ASM
241 <0x01460000 0x10000>, // HSIO
242 <0x01420000 0x00000>, // LRN
243 <0x017d0000 0x10000>, // QFWD
244 <0x01020000 0x20000>, // QS
245 <0x017e0000 0x10000>, // QSYS
Horatiu Vultur034ac242021-03-10 09:31:38 +0100246 <0x01b00000 0x80000>, // REW
247 <0x01010000 0x100>, // GCB
248 <0x00000000 0x100>; // ICPU
Horatiu Vultur3523df12019-04-03 19:54:47 +0200249 reg-names = "port0", "port1", "port2", "port3", "port4",
250 "port5", "port6", "port7", "port8", "port9",
251 "port10", "port11", "port12", "port13",
252 "port14", "port15", "port16", "port17",
253 "port18", "port19", "port20", "port21",
254 "port22", "port23", "port24", "port25",
255 "port26", "port27", "port28", "port29",
256 "port30", "port31", "port32", "port33",
257 "port34", "port35", "port36", "port37",
258 "port38", "port39", "port40", "port41",
259 "port42", "port43", "port44", "port45",
260 "port46", "port47", "ana_ac", "ana_cl",
261 "ana_l2", "asm", "hsio", "lrn", "qfwd",
Horatiu Vultur034ac242021-03-10 09:31:38 +0100262 "qs", "qsys", "rew", "gcb", "icpu";
Horatiu Vultur3523df12019-04-03 19:54:47 +0200263 status = "okay";
264
265 ethernet-ports {
266 #address-cells = <1>;
267 #size-cells = <0>;
268 };
269 };
270
271 mdio0: mdio@010100c8 {
272 #address-cells = <1>;
273 #size-cells = <0>;
274 compatible = "mscc,jr2-miim";
275 reg = <0x010100c8 0x24>;
276 status = "disabled";
277 };
278
279 mdio1: mdio@010100ec {
280 #address-cells = <1>;
281 #size-cells = <0>;
282 compatible = "mscc,jr2-miim";
283 reg = <0x010100ec 0x24>;
284 status = "disabled";
285 };
286
287 mdio2: mdio@01010110 {
288 #address-cells = <1>;
289 #size-cells = <0>;
290 compatible = "mscc,jr2-miim";
291 reg = <0x01010110 0x24>;
292 status = "disabled";
293 };
294
295 hsio: syscon@10d0000 {
296 compatible = "mscc,jr2-hsio", "syscon", "simple-mfd";
297 reg = <0x10d0000 0x10000>;
298
299 serdes_hsio: serdes_hsio {
300 compatible = "mscc,vsc7454-serdes";
301 #phy-cells = <3>;
302 };
303 };
Horatiu Vultur6dfdd0c2019-01-12 18:56:57 +0100304 };
305};