Merge branch 'master' of git://git.denx.de/u-boot-arm
diff --git a/Makefile b/Makefile
index 8df60fa..de4ceb9 100644
--- a/Makefile
+++ b/Makefile
@@ -700,7 +700,7 @@
: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring rev2,$@)" ] ; then \
- echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
+ echo "#define CONFIG_MPC5121ADS_REV2 1" > $(obj)include/config.h; \
fi
@$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c
index 007f5ce..433d477 100644
--- a/arch/blackfin/cpu/initcode.c
+++ b/arch/blackfin/cpu/initcode.c
@@ -391,7 +391,9 @@
/* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
ADI_SYSCTRL_VALUES memory_settings;
- uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT;
+ uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_LOCKCNT;
+ if (!ANOMALY_05000440)
+ actions |= SYSCTRL_PLLDIV;
if (CONFIG_HAS_VR) {
actions |= SYSCTRL_VRCTL;
if (CONFIG_VR_CTL_VAL & FREQ_MASK)
@@ -410,6 +412,8 @@
serial_putc('e');
bfrom_SysControl(actions, &memory_settings, NULL);
serial_putc('f');
+ if (ANOMALY_05000440)
+ bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
#if ANOMALY_05000432
bfin_write_SIC_IWR1(-1);
#endif
diff --git a/arch/blackfin/include/asm/mach-bf518/anomaly.h b/arch/blackfin/include/asm/mach-bf518/anomaly.h
index d808b45..24918c5 100644
--- a/arch/blackfin/include/asm/mach-bf518/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf518/anomaly.h
@@ -88,6 +88,8 @@
#define ANOMALY_05000477 (1)
/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
diff --git a/arch/blackfin/include/asm/mach-bf527/anomaly.h b/arch/blackfin/include/asm/mach-bf527/anomaly.h
index 9358afa..72a6369 100644
--- a/arch/blackfin/include/asm/mach-bf527/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf527/anomaly.h
@@ -12,7 +12,7 @@
/* This file should be up to date with:
* - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List
- * - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List
+ * - Revision H, 04/29/2010; ADSP-BF527 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -220,6 +220,8 @@
#define ANOMALY_05000483 (1)
/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3))
+/* The CODEC Zero-Cross Detect Feature is not Functional */
+#define ANOMALY_05000487 (1)
/* IFLUSH sucks at life */
#define ANOMALY_05000491 (1)
diff --git a/arch/blackfin/include/asm/mach-bf533/anomaly.h b/arch/blackfin/include/asm/mach-bf533/anomaly.h
index 78f8721..30e0eba 100644
--- a/arch/blackfin/include/asm/mach-bf533/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf533/anomaly.h
@@ -11,7 +11,7 @@
*/
/* This file should be up to date with:
- * - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ * - Revision F, 05/25/2010; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -206,6 +206,10 @@
#define ANOMALY_05000443 (1)
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */
+#define ANOMALY_05000471 (1)
/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
#define ANOMALY_05000473 (1)
/* Possible Lockup Condition whem Modifying PLL from External Memory */
@@ -357,6 +361,7 @@
#define ANOMALY_05000430 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
diff --git a/arch/blackfin/include/asm/mach-bf537/anomaly.h b/arch/blackfin/include/asm/mach-bf537/anomaly.h
index 43df6af..d3a2966 100644
--- a/arch/blackfin/include/asm/mach-bf537/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf537/anomaly.h
@@ -11,7 +11,7 @@
*/
/* This file should be up to date with:
- * - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
+ * - Revision E, 05/25/2010; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -160,12 +160,16 @@
#define ANOMALY_05000443 (1)
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
#define ANOMALY_05000473 (1)
/* Possible Lockup Condition whem Modifying PLL from External Memory */
#define ANOMALY_05000475 (1)
/* TESTSET Instruction Cannot Be Interrupted */
#define ANOMALY_05000477 (1)
+/* Multiple Simultaneous Urgent DMA Requests May Cause DMA System Instability */
+#define ANOMALY_05000480 (__SILICON_REVISION__ < 3)
/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
#define ANOMALY_05000481 (1)
/* IFLUSH sucks at life */
@@ -211,6 +215,7 @@
#define ANOMALY_05000430 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
diff --git a/arch/blackfin/include/asm/mach-bf538/anomaly.h b/arch/blackfin/include/asm/mach-bf538/anomaly.h
index e22d23c..4bc1f4a 100644
--- a/arch/blackfin/include/asm/mach-bf538/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf538/anomaly.h
@@ -11,8 +11,8 @@
*/
/* This file should be up to date with:
- * - Revision H, 07/10/2009; ADSP-BF538/BF538F Blackfin Processor Anomaly List
- * - Revision M, 07/10/2009; ADSP-BF539/BF539F Blackfin Processor Anomaly List
+ * - Revision I, 05/25/2010; ADSP-BF538/BF538F Blackfin Processor Anomaly List
+ * - Revision N, 05/25/2010; ADSP-BF539/BF539F Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -142,6 +142,8 @@
#define ANOMALY_05000477 (1)
/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
@@ -184,6 +186,7 @@
#define ANOMALY_05000430 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
diff --git a/arch/blackfin/include/asm/mach-bf548/anomaly.h b/arch/blackfin/include/asm/mach-bf548/anomaly.h
index 7bda09c..b9f4ecc 100644
--- a/arch/blackfin/include/asm/mach-bf548/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf548/anomaly.h
@@ -11,7 +11,7 @@
*/
/* This file should be up to date with:
- * - Revision I, 07/23/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ * - Revision J, 06/03/2010; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -110,8 +110,6 @@
#define ANOMALY_05000379 (1)
/* 8-Bit NAND Flash Boot Mode Not Functional */
#define ANOMALY_05000382 (__SILICON_REVISION__ < 1)
-/* Some ATAPI Modes Are Not Functional */
-#define ANOMALY_05000383 (1)
/* Boot from OTP Memory Not Functional */
#define ANOMALY_05000385 (__SILICON_REVISION__ < 1)
/* bfrom_SysControl() Firmware Routine Not Functional */
@@ -218,6 +216,8 @@
#define ANOMALY_05000481 (1)
/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
#define ANOMALY_05000483 (1)
+/* DDR Trim May Not Be Performed for Certain VLEV Values in OTP Page PBS00L */
+#define ANOMALY_05000484 (__SILICON_REVISION__ < 3)
/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
#define ANOMALY_05000485 (__SILICON_REVISION__ >= 2)
/* IFLUSH sucks at life */
@@ -272,6 +272,7 @@
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
#define ANOMALY_05000475 (0)
#endif
diff --git a/arch/blackfin/include/asm/mach-bf561/anomaly.h b/arch/blackfin/include/asm/mach-bf561/anomaly.h
index 4c108c9..9313c27 100644
--- a/arch/blackfin/include/asm/mach-bf561/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf561/anomaly.h
@@ -11,7 +11,7 @@
*/
/* This file should be up to date with:
- * - Revision Q, 11/07/2008; ADSP-BF561 Blackfin Processor Anomaly List
+ * - Revision R, 05/25/2010; ADSP-BF561 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -286,12 +286,18 @@
#define ANOMALY_05000428 (__SILICON_REVISION__ > 3)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
+/* SCKELOW Feature Is Not Functional */
+#define ANOMALY_05000458 (1)
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */
+#define ANOMALY_05000471 (1)
/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
#define ANOMALY_05000473 (1)
/* Possible Lockup Condition whem Modifying PLL from External Memory */
-#define ANOMALY_05000475 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000475 (1)
/* TESTSET Instruction Cannot Be Interrupted */
#define ANOMALY_05000477 (1)
/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
@@ -316,6 +322,7 @@
#define ANOMALY_05000430 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 2065b6d..cec7666 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -30,7 +30,7 @@
SOBJS-y += ticks.o
SOBJS-y += reloc.o
-COBJS-y += bat_rw.o
+COBJS-$(CONFIG_BAT_RW) += bat_rw.o
COBJS-y += board.o
COBJS-y += bootm.o
COBJS-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount.o
diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c
index a84644d..8cc6853 100644
--- a/board/freescale/mpc5121ads/mpc5121ads.c
+++ b/board/freescale/mpc5121ads/mpc5121ads.c
@@ -102,7 +102,7 @@
* write commands in order to establish the device ID.
*/
-#ifdef CONFIG_ADS5121_REV2
+#ifdef CONFIG_MPC5121ADS_REV2
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1);
#else
if (in_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
@@ -329,7 +329,7 @@
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 spridr = in_be32(&im->sysconf.spridr);
- printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
+ printf ("Board: MPC5121ADS rev. 0x%04x (CPLD rev. 0x%02x)\n",
brd_rev, cpld_rev);
/* initialize function mux & slew rate IO inter alia on IO Pins */
diff --git a/common/env_mmc.c b/common/env_mmc.c
index d443ff5..3d7fceb 100644
--- a/common/env_mmc.c
+++ b/common/env_mmc.c
@@ -29,6 +29,7 @@
#include <linux/stddef.h>
#include <malloc.h>
#include <mmc.h>
+#include <errno.h>
/* references to names in env_common.c */
extern uchar default_environment[];
@@ -96,13 +97,23 @@
int saveenv(void)
{
+ env_t env_new;
+ ssize_t len;
+ char *res;
struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
if (init_mmc_for_env(mmc))
return 1;
+ res = (char *)&env_new.data;
+ len = hexport('\0', &res, ENV_SIZE);
+ if (len < 0) {
+ error("Cannot export environment: errno = %d\n", errno);
+ return 1;
+ }
+ env_new.crc = crc32(0, env_new.data, ENV_SIZE);
printf("Writing to MMC(%d)... ", CONFIG_SYS_MMC_ENV_DEV);
- if (write_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, env_ptr)) {
+ if (write_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, (u_char *)&env_new)) {
puts("failed\n");
return 1;
}
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 7e833fd..32f24de 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -70,6 +70,15 @@
{
while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0);
serial_out(c, &com_port->thr);
+
+ /*
+ * Call watchdog_reset() upon newline. This is done here in putc
+ * since the environment code uses a single puts() to print the complete
+ * environment upon "printenv". So we can't put this watchdog call
+ * in puts().
+ */
+ if (c == '\n')
+ WATCHDOG_RESET();
}
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 576aa74..85b68be 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -31,6 +31,7 @@
#define CONFIG_MPC8220 1
#define CONFIG_ALASKA8220 1 /* ... on Alaska board */
+#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 645d947..2b7b8b5 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -53,6 +53,7 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
#define CONFIG_HIGH_BATS 1 /* High BATs supported & enabled */
#define CONFIG_ALTIVEC 1
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 3b80d14..d92b12d 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -68,6 +68,7 @@
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */
#define CONFIG_SYS_NUM_ADDR_MAP 8 /* Number of addr map slots = 8 dbats */
diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h
index 8770a8d..306baed 100644
--- a/include/configs/XPEDITE5170.h
+++ b/include/configs/XPEDITE5170.h
@@ -36,6 +36,7 @@
#define CONFIG_SYS_BOARD_NAME "XPedite5170"
#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
+#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */
#define CONFIG_ALTIVEC 1
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index c439068..8ec6c84 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -31,6 +31,7 @@
#define CONFIG_MPC8220 1
#define CONFIG_YUKON8220 1 /* ... on Yukon board */
+#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index a7831c0..490d4f5 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -64,6 +64,7 @@
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */
#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/