sunxi: Add AXP_PMIC_BUS kconfig entry
Add simple and meaningful kconfig option for pmic_bus.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 2fd372a..1a179e1 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -23,6 +23,12 @@
Support for the PRCM (Power/Reset/Clock Management) unit available
in A31 SoC.
+config AXP_PMIC_BUS
+ bool "Sunxi AXP PMIC bus access helpers"
+ help
+ Select this PMIC bus access helpers for Sunxi platform PRCM or other
+ AXP family PMIC devices.
+
config SUN8I_RSB
bool "Allwinner sunXi Reduced Serial Bus Driver"
help
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 64407db..55df794 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -18,6 +18,7 @@
endif
obj-$(CONFIG_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_SUN6I_PRCM) += prcm.o
+obj-$(CONFIG_AXP_PMIC_BUS) += pmic_bus.o
obj-$(CONFIG_SUN8I_RSB) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
@@ -31,12 +32,6 @@
endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o
-obj-$(CONFIG_AXP152_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP209_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP221_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP809_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP818_POWER) += pmic_bus.o
-
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index d8c107e..1a38524 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -22,6 +22,7 @@
config AXP152_POWER
bool "axp152 pmic support"
depends on MACH_SUN5I
+ select AXP_PMIC_BUS
select CMD_POWEROFF
---help---
Select this to enable support for the axp152 pmic found on most
@@ -30,6 +31,7 @@
config AXP209_POWER
bool "axp209 pmic support"
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+ select AXP_PMIC_BUS
select CMD_POWEROFF
---help---
Select this to enable support for the axp209 pmic found on most
@@ -38,6 +40,7 @@
config AXP221_POWER
bool "axp221 / axp223 pmic support"
depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
+ select AXP_PMIC_BUS
select CMD_POWEROFF
---help---
Select this to enable support for the axp221/axp223 pmic found on most
@@ -46,6 +49,7 @@
config AXP809_POWER
bool "axp809 pmic support"
depends on MACH_SUN9I
+ select AXP_PMIC_BUS
select CMD_POWEROFF
---help---
Say y here to enable support for the axp809 pmic found on A80 boards.
@@ -53,6 +57,7 @@
config AXP818_POWER
bool "axp818 pmic support"
depends on MACH_SUN8I_A83T
+ select AXP_PMIC_BUS
select CMD_POWEROFF
---help---
Say y here to enable support for the axp818 pmic found on