commit fe8f39aa2a404585e7f9f329836b9e3221585106
author Tom Rini <trini@konsulko.com> Sun Dec 04 10:03:29 2022 -0500
committer Tom Rini <trini@konsulko.com> Fri Dec 23 10:07:03 2022 -0500
tree ea7961a8c9138089d0dd5780882924b5a7f40765
parent f9c02357e6072548c37b69a5608896155d6b5ec5

Convert CONFIG_SYS_FPGA_CHECK_BUSY to Kconfig

This converts the following to Kconfig:
    CONFIG_SYS_FPGA_CHECK_BUSY

Signed-off-by: Tom Rini <trini@konsulko.com>

drivers/fpga/Kconfig

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 813d6a8..11b742e 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -96,6 +96,10 @@
 	  Enable Virtex-II FPGA driver for loading in BIT format. This driver
 	  also supports many newer Xilinx FPGA families.
 
+config SYS_FPGA_CHECK_BUSY
+	bool "Perform busy check during load from FPGA"
+	depends on FPGA_SPARTAN2 || FPGA_SPARTAN3 || FPGA_VIRTEX2
+
 config FPGA_ZYNQPL
 	bool "Enable Xilinx FPGA for Zynq"
 	depends on ARCH_ZYNQ

drivers/fpga/spartan2.c

diff --git a/drivers/fpga/spartan2.c b/drivers/fpga/spartan2.c
index 57a4532..68971d9 100644
--- a/drivers/fpga/spartan2.c
+++ b/drivers/fpga/spartan2.c
@@ -10,8 +10,6 @@
 #include <log.h>
 #include <spartan2.h>		/* Spartan-II device family */
 
-#undef CONFIG_SYS_FPGA_CHECK_BUSY
-
 /* Note: The assumption is that we cannot possibly run fast enough to
  * overrun the device (the Slave Parallel mode can free run at 50MHz).
  * If there is a need to operate slower, define CONFIG_FPGA_DELAY in

drivers/fpga/spartan3.c

diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c
index fdec89b..1d5073c 100644
--- a/drivers/fpga/spartan3.c
+++ b/drivers/fpga/spartan3.c
@@ -15,8 +15,6 @@
 #include <log.h>
 #include <spartan3.h>		/* Spartan-II device family */
 
-#undef CONFIG_SYS_FPGA_CHECK_BUSY
-
 /* Note: The assumption is that we cannot possibly run fast enough to
  * overrun the device (the Slave Parallel mode can free run at 50MHz).
  * If there is a need to operate slower, define CONFIG_FPGA_DELAY in

drivers/fpga/virtex2.c

diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c
index 8871dea..ed2a416 100644
--- a/drivers/fpga/virtex2.c
+++ b/drivers/fpga/virtex2.c
@@ -21,14 +21,11 @@
 #include <linux/delay.h>
 
 /*
- * If the SelectMap interface can be overrun by the processor, define
- * CONFIG_SYS_FPGA_CHECK_BUSY and/or CONFIG_FPGA_DELAY in the board
+ * If the SelectMap interface can be overrun by the processor, enable
+ * CONFIG_SYS_FPGA_CHECK_BUSY and/or define CONFIG_FPGA_DELAY in the board
  * configuration file and add board-specific support for checking BUSY status.
  * By default, assume that the SelectMap interface cannot be overrun.
  */
-#ifndef CONFIG_SYS_FPGA_CHECK_BUSY
-#undef CONFIG_SYS_FPGA_CHECK_BUSY
-#endif
 
 #ifndef CONFIG_FPGA_DELAY
 #define CONFIG_FPGA_DELAY()