arm: dts: k3-pinctrl: Sync with kernel v6.6-rc1
Sync pinctrl header with v6.6-rc1
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
diff --git a/arch/arm/dts/k3-pinctrl.h b/arch/arm/dts/k3-pinctrl.h
index c97548a..2a4e0e0 100644
--- a/arch/arm/dts/k3-pinctrl.h
+++ b/arch/arm/dts/k3-pinctrl.h
@@ -11,6 +11,7 @@
#define PULLUDEN_SHIFT (16)
#define PULLTYPESEL_SHIFT (17)
#define RXACTIVE_SHIFT (18)
+#define DEBOUNCE_SHIFT (11)
#define PULL_DISABLE (1 << PULLUDEN_SHIFT)
#define PULL_ENABLE (0 << PULLUDEN_SHIFT)
@@ -29,9 +30,20 @@
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN)
+#define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF2 (2 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF3 (3 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF4 (4 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT)
+
#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62PX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62PX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
+
#define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))