x86: braswell: Add FSP configuration
Add FSP related configuration for Braswell.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/x86/cpu/braswell/Makefile b/arch/x86/cpu/braswell/Makefile
index 19bcee6..ddf6d28 100644
--- a/arch/x86/cpu/braswell/Makefile
+++ b/arch/x86/cpu/braswell/Makefile
@@ -4,4 +4,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += braswell.o cpu.o early_uart.o
+obj-y += braswell.o cpu.o early_uart.o fsp_configs.o
diff --git a/arch/x86/cpu/braswell/fsp_configs.c b/arch/x86/cpu/braswell/fsp_configs.c
new file mode 100644
index 0000000..d984519
--- /dev/null
+++ b/arch/x86/cpu/braswell/fsp_configs.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/fsp/fsp_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * Override the FSP's Azalia configuration data
+ *
+ * @azalia: pointer to be updated to point to a ROM address where Azalia
+ * configuration data is stored
+ */
+__weak void update_fsp_azalia_configs(struct azalia_config **azalia)
+{
+ *azalia = NULL;
+}
+
+/**
+ * Override the FSP's GPIO configuration data
+ *
+ * @family: pointer to be updated to point to a ROM address where GPIO
+ * family configuration data is stored
+ * @pad: pointer to be updated to point to a ROM address where GPIO
+ * pad configuration data is stored
+ */
+__weak void update_fsp_gpio_configs(struct gpio_family **family,
+ struct gpio_pad **pad)
+{
+ *family = NULL;
+ *pad = NULL;
+}
+
+/**
+ * Override the FSP's configuration data.
+ * If the device tree does not specify an integer setting, use the default
+ * provided in Intel's Braswell release FSP/BraswellFsp.bsf file.
+ */
+void update_fsp_configs(struct fsp_config_data *config,
+ struct fspinit_rtbuf *rt_buf)
+{
+ struct upd_region *fsp_upd = &config->fsp_upd;
+ struct memory_upd *memory_upd = &fsp_upd->memory_upd;
+ struct silicon_upd *silicon_upd = &fsp_upd->silicon_upd;
+ const void *blob = gd->fdt_blob;
+ int node;
+
+ /* Initialize runtime buffer for fsp_init() */
+ rt_buf->common.stack_top = config->common.stack_top - 32;
+ rt_buf->common.boot_mode = config->common.boot_mode;
+ rt_buf->common.upd_data = &config->fsp_upd;
+
+ node = fdt_node_offset_by_compatible(blob, 0, "intel,braswell-fsp");
+ if (node < 0) {
+ debug("%s: Cannot find FSP node\n", __func__);
+ return;
+ }
+
+ node = fdt_node_offset_by_compatible(blob, node,
+ "intel,braswell-fsp-memory");
+ if (node < 0) {
+ debug("%s: Cannot find FSP memory node\n", __func__);
+ return;
+ }
+
+ /* Override memory UPD contents */
+ memory_upd->mrc_init_tseg_size = fdtdec_get_int(blob, node,
+ "fsp,mrc-init-tseg-size", MRC_INIT_TSEG_SIZE_4MB);
+ memory_upd->mrc_init_mmio_size = fdtdec_get_int(blob, node,
+ "fsp,mrc-init-mmio-size", MRC_INIT_MMIO_SIZE_2048MB);
+ memory_upd->mrc_init_spd_addr1 = fdtdec_get_int(blob, node,
+ "fsp,mrc-init-spd-addr1", 0xa0);
+ memory_upd->mrc_init_spd_addr2 = fdtdec_get_int(blob, node,
+ "fsp,mrc-init-spd-addr2", 0xa2);
+ memory_upd->igd_dvmt50_pre_alloc = fdtdec_get_int(blob, node,
+ "fsp,igd-dvmt50-pre-alloc", IGD_DVMT50_PRE_ALLOC_32MB);
+ memory_upd->aperture_size = fdtdec_get_int(blob, node,
+ "fsp,aperture-size", APERTURE_SIZE_256MB);
+ memory_upd->gtt_size = fdtdec_get_int(blob, node,
+ "fsp,gtt-size", GTT_SIZE_1MB);
+ memory_upd->legacy_seg_decode = fdtdec_get_bool(blob, node,
+ "fsp,legacy-seg-decode");
+ memory_upd->enable_dvfs = fdtdec_get_bool(blob, node,
+ "fsp,enable-dvfs");
+ memory_upd->memory_type = fdtdec_get_int(blob, node,
+ "fsp,memory-type", DRAM_TYPE_DDR3);
+ memory_upd->enable_ca_mirror = fdtdec_get_bool(blob, node,
+ "fsp,enable-ca-mirror");
+
+ node = fdt_node_offset_by_compatible(blob, node,
+ "intel,braswell-fsp-silicon");
+ if (node < 0) {
+ debug("%s: Cannot find FSP silicon node\n", __func__);
+ return;
+ }
+
+ /* Override silicon UPD contents */
+ silicon_upd->sdcard_mode = fdtdec_get_int(blob, node,
+ "fsp,sdcard-mode", SDCARD_MODE_PCI);
+ silicon_upd->enable_hsuart0 = fdtdec_get_bool(blob, node,
+ "fsp,enable-hsuart0");
+ silicon_upd->enable_hsuart1 = fdtdec_get_bool(blob, node,
+ "fsp,enable-hsuart1");
+ silicon_upd->enable_azalia = fdtdec_get_bool(blob, node,
+ "fsp,enable-azalia");
+ if (silicon_upd->enable_azalia)
+ update_fsp_azalia_configs(&silicon_upd->azalia_cfg_ptr);
+ silicon_upd->enable_sata = fdtdec_get_bool(blob, node,
+ "fsp,enable-sata");
+ silicon_upd->enable_xhci = fdtdec_get_bool(blob, node,
+ "fsp,enable-xhci");
+ silicon_upd->lpe_mode = fdtdec_get_int(blob, node,
+ "fsp,lpe-mode", LPE_MODE_PCI);
+ silicon_upd->enable_dma0 = fdtdec_get_bool(blob, node,
+ "fsp,enable-dma0");
+ silicon_upd->enable_dma1 = fdtdec_get_bool(blob, node,
+ "fsp,enable-dma1");
+ silicon_upd->enable_i2c0 = fdtdec_get_bool(blob, node,
+ "fsp,enable-i2c0");
+ silicon_upd->enable_i2c1 = fdtdec_get_bool(blob, node,
+ "fsp,enable-i2c1");
+ silicon_upd->enable_i2c2 = fdtdec_get_bool(blob, node,
+ "fsp,enable-i2c2");
+ silicon_upd->enable_i2c3 = fdtdec_get_bool(blob, node,
+ "fsp,enable-i2c3");
+ silicon_upd->enable_i2c4 = fdtdec_get_bool(blob, node,
+ "fsp,enable-i2c4");
+ silicon_upd->enable_i2c5 = fdtdec_get_bool(blob, node,
+ "fsp,enable-i2c5");
+ silicon_upd->enable_i2c6 = fdtdec_get_bool(blob, node,
+ "fsp,enable-i2c6");
+#ifdef CONFIG_HAVE_VBT
+ silicon_upd->graphics_config_ptr = CONFIG_VBT_ADDR;
+#endif
+ update_fsp_gpio_configs(&silicon_upd->gpio_familiy_ptr,
+ &silicon_upd->gpio_pad_ptr);
+ silicon_upd->emmc_mode = fdtdec_get_int(blob, node,
+ "fsp,emmc-mode", EMMC_MODE_PCI);
+ silicon_upd->sata_speed = fdtdec_get_int(blob, node,
+ "fsp,sata-speed", SATA_SPEED_GEN3);
+ silicon_upd->pmic_i2c_bus = fdtdec_get_int(blob, node,
+ "fsp,pmic-i2c-bus", 0);
+ silicon_upd->enable_isp = fdtdec_get_bool(blob, node,
+ "fsp,enable-isp");
+ silicon_upd->isp_pci_dev_config = fdtdec_get_int(blob, node,
+ "fsp,isp-pci-dev-config", ISP_PCI_DEV_CONFIG_2);
+ silicon_upd->turbo_mode = fdtdec_get_bool(blob, node,
+ "fsp,turbo-mode");
+ silicon_upd->pnp_settings = fdtdec_get_int(blob, node,
+ "fsp,pnp-settings", PNP_SETTING_POWER_AND_PERF);
+ silicon_upd->sd_detect_chk = fdtdec_get_bool(blob, node,
+ "fsp,sd-detect-chk");
+}
diff --git a/arch/x86/include/asm/arch-braswell/fsp/fsp_configs.h b/arch/x86/include/asm/arch-braswell/fsp/fsp_configs.h
new file mode 100644
index 0000000..4b8521d
--- /dev/null
+++ b/arch/x86/include/asm/arch-braswell/fsp/fsp_configs.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSP_CONFIGS_H__
+#define __FSP_CONFIGS_H__
+
+#ifndef __ASSEMBLY__
+struct fsp_config_data {
+ struct fsp_cfg_common common;
+ struct upd_region fsp_upd;
+};
+
+struct fspinit_rtbuf {
+ struct common_buf common; /* FSP common runtime data structure */
+};
+#endif
+
+/* FSP user configuration settings */
+
+#define MRC_INIT_TSEG_SIZE_1MB 1
+#define MRC_INIT_TSEG_SIZE_2MB 2
+#define MRC_INIT_TSEG_SIZE_4MB 4
+#define MRC_INIT_TSEG_SIZE_8MB 8
+
+#define MRC_INIT_MMIO_SIZE_1024MB 0x400
+#define MRC_INIT_MMIO_SIZE_1536MB 0x600
+#define MRC_INIT_MMIO_SIZE_2048MB 0x800
+
+#define IGD_DVMT50_PRE_ALLOC_32MB 0x01
+#define IGD_DVMT50_PRE_ALLOC_64MB 0x02
+#define IGD_DVMT50_PRE_ALLOC_96MB 0x03
+#define IGD_DVMT50_PRE_ALLOC_128MB 0x04
+#define IGD_DVMT50_PRE_ALLOC_160MB 0x05
+#define IGD_DVMT50_PRE_ALLOC_192MB 0x06
+#define IGD_DVMT50_PRE_ALLOC_224MB 0x07
+#define IGD_DVMT50_PRE_ALLOC_256MB 0x08
+#define IGD_DVMT50_PRE_ALLOC_288MB 0x09
+#define IGD_DVMT50_PRE_ALLOC_320MB 0x0a
+#define IGD_DVMT50_PRE_ALLOC_352MB 0x0b
+#define IGD_DVMT50_PRE_ALLOC_384MB 0x0c
+#define IGD_DVMT50_PRE_ALLOC_416MB 0x0d
+#define IGD_DVMT50_PRE_ALLOC_448MB 0x0e
+#define IGD_DVMT50_PRE_ALLOC_480MB 0x0f
+#define IGD_DVMT50_PRE_ALLOC_512MB 0x10
+
+#define APERTURE_SIZE_128MB 1
+#define APERTURE_SIZE_256MB 2
+#define APERTURE_SIZE_512MB 3
+
+#define GTT_SIZE_1MB 1
+#define GTT_SIZE_2MB 2
+
+#define DRAM_TYPE_DDR3 0
+#define DRAM_TYPE_LPDDR3 1
+
+#define SDCARD_MODE_DISABLED 0
+#define SDCARD_MODE_PCI 1
+#define SDCARD_MODE_ACPI 2
+
+#define LPE_MODE_DISABLED 0
+#define LPE_MODE_PCI 1
+#define LPE_MODE_ACPI 2
+
+#define CHV_SVID_CONFIG_0 0
+#define CHV_SVID_CONFIG_1 1
+#define CHV_SVID_CONFIG_2 2
+#define CHV_SVID_CONFIG_3 3
+
+#define EMMC_MODE_DISABLED 0
+#define EMMC_MODE_PCI 1
+#define EMMC_MODE_ACPI 2
+
+#define SATA_SPEED_GEN1 1
+#define SATA_SPEED_GEN2 2
+#define SATA_SPEED_GEN3 3
+
+#define ISP_PCI_DEV_CONFIG_1 1
+#define ISP_PCI_DEV_CONFIG_2 2
+#define ISP_PCI_DEV_CONFIG_3 3
+
+#define PNP_SETTING_DISABLED 0
+#define PNP_SETTING_POWER 1
+#define PNP_SETTING_PERF 2
+#define PNP_SETTING_POWER_AND_PERF 3
+
+#endif /* __FSP_CONFIGS_H__ */
diff --git a/arch/x86/include/asm/arch-braswell/fsp/fsp_vpd.h b/arch/x86/include/asm/arch-braswell/fsp/fsp_vpd.h
new file mode 100644
index 0000000..ecb01fa
--- /dev/null
+++ b/arch/x86/include/asm/arch-braswell/fsp/fsp_vpd.h
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2015, Intel Corporation
+ * Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef __FSP_VPD_H__
+#define __FSP_VPD_H__
+
+struct __packed memory_upd {
+ u64 signature; /* Offset 0x0020 */
+ u8 revision; /* Offset 0x0028 */
+ u8 unused2[7]; /* Offset 0x0029 */
+ u16 mrc_init_tseg_size; /* Offset 0x0030 */
+ u16 mrc_init_mmio_size; /* Offset 0x0032 */
+ u8 mrc_init_spd_addr1; /* Offset 0x0034 */
+ u8 mrc_init_spd_addr2; /* Offset 0x0035 */
+ u8 mem_ch0_config; /* Offset 0x0036 */
+ u8 mem_ch1_config; /* Offset 0x0037 */
+ u32 memory_spd_ptr; /* Offset 0x0038 */
+ u8 igd_dvmt50_pre_alloc; /* Offset 0x003c */
+ u8 aperture_size; /* Offset 0x003d */
+ u8 gtt_size; /* Offset 0x003e */
+ u8 legacy_seg_decode; /* Offset 0x003f */
+ u8 enable_dvfs; /* Offset 0x0040 */
+ u8 memory_type; /* Offset 0x0041 */
+ u8 enable_ca_mirror; /* Offset 0x0042 */
+ u8 reserved[189]; /* Offset 0x0043 */
+};
+
+struct __packed azalia_verb_table_header {
+ u32 vendor_device_id;
+ u16 sub_system_id;
+ u8 revision_id;
+ u8 front_panel_support;
+ u16 number_of_rear_jacks;
+ u16 number_of_front_jacks;
+};
+
+struct __packed azalia_verb_table {
+ struct azalia_verb_table_header header;
+ u32 *data;
+};
+
+struct __packed azalia_config {
+ u8 pme_enable:1;
+ u8 docking_supported:1;
+ u8 docking_attached:1;
+ u8 hdmi_codec_enable:1;
+ u8 azalia_v_ci_enable:1;
+ u8 reserved:3;
+ u8 verb_table_num;
+ struct azalia_verb_table *verb_table;
+ u16 reset_wait_timer_ms;
+};
+
+struct gpio_family {
+ u32 confg;
+ u32 confg_changes;
+ u32 misc;
+ u32 mmio_addr;
+ wchar_t *name;
+};
+
+struct gpio_pad {
+ u32 confg0;
+ u32 confg0_changes;
+ u32 confg1;
+ u32 confg1_changes;
+ u32 community;
+ u32 mmio_addr;
+ wchar_t *name;
+ u32 misc;
+};
+
+struct __packed silicon_upd {
+ u64 signature; /* Offset 0x0100 */
+ u8 revision; /* Offset 0x0108 */
+ u8 unused3[7]; /* Offset 0x0109 */
+ u8 sdcard_mode; /* Offset 0x0110 */
+ u8 enable_hsuart0; /* Offset 0x0111 */
+ u8 enable_hsuart1; /* Offset 0x0112 */
+ u8 enable_azalia; /* Offset 0x0113 */
+ struct azalia_config *azalia_cfg_ptr; /* Offset 0x0114 */
+ u8 enable_sata; /* Offset 0x0118 */
+ u8 enable_xhci; /* Offset 0x0119 */
+ u8 lpe_mode; /* Offset 0x011a */
+ u8 enable_dma0; /* Offset 0x011b */
+ u8 enable_dma1; /* Offset 0x011c */
+ u8 enable_i2c0; /* Offset 0x011d */
+ u8 enable_i2c1; /* Offset 0x011e */
+ u8 enable_i2c2; /* Offset 0x011f */
+ u8 enable_i2c3; /* Offset 0x0120 */
+ u8 enable_i2c4; /* Offset 0x0121 */
+ u8 enable_i2c5; /* Offset 0x0122 */
+ u8 enable_i2c6; /* Offset 0x0123 */
+ u32 graphics_config_ptr; /* Offset 0x0124 */
+ struct gpio_family *gpio_familiy_ptr; /* Offset 0x0128 */
+ struct gpio_pad *gpio_pad_ptr; /* Offset 0x012c */
+ u8 disable_punit_pwr_config; /* Offset 0x0130 */
+ u8 chv_svid_config; /* Offset 0x0131 */
+ u8 disable_dptf; /* Offset 0x0132 */
+ u8 emmc_mode; /* Offset 0x0133 */
+ u8 usb3_clk_ssc; /* Offset 0x0134 */
+ u8 disp_clk_ssc; /* Offset 0x0135 */
+ u8 sata_clk_ssc; /* Offset 0x0136 */
+ u8 usb2_port0_pe_txi_set; /* Offset 0x0137 */
+ u8 usb2_port0_txi_set; /* Offset 0x0138 */
+ u8 usb2_port0_tx_emphasis_en; /* Offset 0x0139 */
+ u8 usb2_port0_tx_pe_half; /* Offset 0x013a */
+ u8 usb2_port1_pe_txi_set; /* Offset 0x013b */
+ u8 usb2_port1_txi_set; /* Offset 0x013c */
+ u8 usb2_port1_tx_emphasis_en; /* Offset 0x013d */
+ u8 usb2_port1_tx_pe_half; /* Offset 0x013e */
+ u8 usb2_port2_pe_txi_set; /* Offset 0x013f */
+ u8 usb2_port2_txi_set; /* Offset 0x0140 */
+ u8 usb2_port2_tx_emphasis_en; /* Offset 0x0141 */
+ u8 usb2_port2_tx_pe_half; /* Offset 0x0142 */
+ u8 usb2_port3_pe_txi_set; /* Offset 0x0143 */
+ u8 usb2_port3_txi_set; /* Offset 0x0144 */
+ u8 usb2_port3_tx_emphasis_en; /* Offset 0x0145 */
+ u8 usb2_port3_tx_pe_half; /* Offset 0x0146 */
+ u8 usb2_port4_pe_txi_set; /* Offset 0x0147 */
+ u8 usb2_port4_txi_set; /* Offset 0x0148 */
+ u8 usb2_port4_tx_emphasis_en; /* Offset 0x0149 */
+ u8 usb2_port4_tx_pe_half; /* Offset 0x014a */
+ u8 usb3_lane0_ow2tap_gen2_deemph3p5; /* Offset 0x014b */
+ u8 usb3_lane1_ow2tap_gen2_deemph3p5; /* Offset 0x014c */
+ u8 usb3_lane2_ow2tap_gen2_deemph3p5; /* Offset 0x014d */
+ u8 usb3_lane3_ow2tap_gen2_deemph3p5; /* Offset 0x014e */
+ u8 sata_speed; /* Offset 0x014f */
+ u8 usb_ssic_port; /* Offset 0x0150 */
+ u8 usb_hsic_port; /* Offset 0x0151 */
+ u8 pcie_rootport_speed; /* Offset 0x0152 */
+ u8 enable_ssic; /* Offset 0x0153 */
+ u32 logo_ptr; /* Offset 0x0154 */
+ u32 logo_size; /* Offset 0x0158 */
+ u8 rtc_lock; /* Offset 0x015c */
+ u8 pmic_i2c_bus; /* Offset 0x015d */
+ u8 enable_isp; /* Offset 0x015e */
+ u8 isp_pci_dev_config; /* Offset 0x015f */
+ u8 turbo_mode; /* Offset 0x0160 */
+ u8 pnp_settings; /* Offset 0x0161 */
+ u8 sd_detect_chk; /* Offset 0x0162 */
+ u8 reserved[411]; /* Offset 0x0163 */
+};
+
+#define MEMORY_UPD_ID 0x244450554d454d24 /* '$MEMUPD$' */
+#define SILICON_UPD_ID 0x244450555f495324 /* '$SI_UPD$' */
+
+struct __packed upd_region {
+ u64 signature; /* Offset 0x0000 */
+ u8 revision; /* Offset 0x0008 */
+ u8 unused0[7]; /* Offset 0x0009 */
+ u32 memory_upd_offset; /* Offset 0x0010 */
+ u32 silicon_upd_offset; /* Offset 0x0014 */
+ u64 unused1; /* Offset 0x0018 */
+ struct memory_upd memory_upd; /* Offset 0x0020 */
+ struct silicon_upd silicon_upd; /* Offset 0x0100 */
+ u16 terminator; /* Offset 0x02fe */
+};
+
+#define VPD_IMAGE_ID 0x2450534657534224 /* '$BSWFSP$' */
+
+struct __packed vpd_region {
+ u64 sign; /* Offset 0x0000 */
+ u32 img_rev; /* Offset 0x0008 */
+ u32 upd_offset; /* Offset 0x000c */
+};
+
+#endif /* __FSP_VPD_H__ */
diff --git a/arch/x86/include/asm/arch-braswell/gpio.h b/arch/x86/include/asm/arch-braswell/gpio.h
new file mode 100644
index 0000000..5f1252f
--- /dev/null
+++ b/arch/x86/include/asm/arch-braswell/gpio.h
@@ -0,0 +1,217 @@
+/*
+ * Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * From coreboot src/soc/intel/braswell/include/soc/gpio.h
+ */
+
+#ifndef _BRASWELL_GPIO_H_
+#define _BRASWELL_GPIO_H_
+
+#include <asm/arch/iomap.h>
+
+enum mode_list {
+ M0,
+ M1,
+ M2,
+ M3,
+ M4,
+ M5,
+ M6,
+ M7,
+ M8,
+ M9,
+ M10,
+ M11,
+ M12,
+ M13,
+};
+
+enum int_select {
+ L0,
+ L1,
+ L2,
+ L3,
+ L4,
+ L5,
+ L6,
+ L7,
+ L8,
+ L9,
+ L10,
+ L11,
+ L12,
+ L13,
+ L14,
+ L15,
+};
+
+enum gpio_en {
+ NATIVE = 0xff,
+ GPIO = 0, /* Native, no need to set PAD_VALUE */
+ GPO = 1, /* GPO, output only in PAD_VALUE */
+ GPI = 2, /* GPI, input only in PAD_VALUE */
+ HI_Z = 3,
+ NA_GPO = 0,
+};
+
+enum gpio_state {
+ LOW,
+ HIGH,
+};
+
+enum en_dis {
+ DISABLE, /* Disable */
+ ENABLE, /* Enable */
+};
+
+enum int_type {
+ INT_DIS,
+ TRIG_EDGE_LOW,
+ TRIG_EDGE_HIGH,
+ TRIG_EDGE_BOTH,
+ TRIG_LEVEL,
+};
+
+enum mask {
+ MASKABLE,
+ NON_MASKABLE,
+};
+
+enum glitch_cfg {
+ GLITCH_DISABLE,
+ EN_EDGE_DETECT,
+ EN_RX_DATA,
+ EN_EDGE_RX_DATA,
+};
+
+enum inv_rx_tx {
+ NO_INVERSION = 0,
+ INV_RX_ENABLE = 1,
+ INV_TX_ENABLE = 2,
+ INV_RX_TX_ENABLE = 3,
+ INV_RX_DATA = 4,
+ INV_TX_DATA = 8,
+};
+
+enum voltage {
+ VOLT_3_3, /* Working on 3.3 Volts */
+ VOLT_1_8, /* Working on 1.8 Volts */
+};
+
+enum hs_mode {
+ DISABLE_HS, /* Disable high speed mode */
+ ENABLE_HS, /* Enable high speed mode */
+};
+
+enum odt_up_dn {
+ PULL_UP, /* On Die Termination Up */
+ PULL_DOWN, /* On Die Termination Down */
+};
+
+enum odt_en {
+ DISABLE_OD, /* On Die Termination Disable */
+ ENABLE_OD, /* On Die Termination Enable */
+};
+
+enum pull_type {
+ P_NONE = 0, /* Pull None */
+ P_20K_L = 1, /* Pull Down 20K */
+ P_5K_L = 2, /* Pull Down 5K */
+ P_1K_L = 4, /* Pull Down 1K */
+ P_20K_H = 9, /* Pull Up 20K */
+ P_5K_H = 10, /* Pull Up 5K */
+ P_1K_H = 12 /* Pull Up 1K */
+};
+
+enum bit {
+ ONE_BIT = 1,
+ TWO_BIT = 3,
+ THREE_BIT = 7,
+ FOUR_BIT = 15,
+ FIVE_BIT = 31,
+ SIX_BIT = 63,
+ SEVEN_BIT = 127,
+ EIGHT_BIT = 255
+};
+
+enum gpe_config {
+ GPE,
+ SMI,
+ SCI,
+};
+
+enum community {
+ SOUTHWEST = 0x0000,
+ NORTH = 0x8000,
+ EAST = 0x10000,
+ SOUTHEAST = 0x18000,
+ VIRTUAL = 0x20000,
+};
+
+#define NA 0xff
+#define TERMINATOR 0xffffffff
+
+#define GPIO_FAMILY_CONF(family_name, park_mode, hysctl, vp18_mode, hs_mode, \
+ odt_up_dn, odt_en, curr_src_str, rcomp, family_no, community_offset) { \
+ .confg = ((((park_mode) != NA) ? park_mode << 26 : 0) | \
+ (((hysctl) != NA) ? hysctl << 24 : 0) | \
+ (((vp18_mode) != NA) ? vp18_mode << 21 : 0) | \
+ (((hs_mode) != NA) ? hs_mode << 19 : 0) | \
+ (((odt_up_dn) != NA) ? odt_up_dn << 18 : 0) | \
+ (((odt_en) != NA) ? odt_en << 17 : 0) | \
+ (curr_src_str)), \
+ .confg_changes = ((((park_mode) != NA) ? ONE_BIT << 26 : 0) | \
+ (((hysctl) != NA) ? TWO_BIT << 24 : 0) | \
+ (((vp18_mode) != NA) ? ONE_BIT << 21 : 0) | \
+ (((hs_mode) != NA) ? ONE_BIT << 19 : 0) | \
+ (((odt_up_dn) != NA) ? ONE_BIT << 18 : 0) | \
+ (((odt_en) != NA) ? ONE_BIT << 17 : 0) | \
+ (THREE_BIT)), \
+ .misc = ((rcomp == ENABLE) ? 1 : 0) , \
+ .mmio_addr = (community_offset == TERMINATOR) ? TERMINATOR : \
+ ((family_no != NA) ? (IO_BASE_ADDRESS + community_offset +\
+ (0x80 * family_no) + 0x1080) : 0) , \
+ .name = 0 \
+}
+
+#define GPIO_PAD_CONF(pad_name, mode_select, mode, gpio_config, gpio_state, \
+ gpio_light_mode, int_type, int_sel, term, open_drain, current_source,\
+ int_mask, glitch, inv_rx_tx, wake_mask, wake_mask_bit, gpe, \
+ mmio_offset, community_offset) { \
+ .confg0 = ((((int_sel) != NA) ? (int_sel << 28) : 0) | \
+ (((glitch) != NA) ? (glitch << 26) : 0) | \
+ (((term) != NA) ? (term << 20) : 0) | \
+ (((mode_select) == GPIO) ? ((mode << 16) | (1 << 15)) : \
+ ((mode << 16))) | \
+ (((gpio_config) != NA) ? (gpio_config << 8) : 0) | \
+ (((gpio_light_mode) != NA) ? (gpio_light_mode << 7) : 0) | \
+ (((gpio_state) == HIGH) ? 2 : 0)), \
+ .confg0_changes = ((((int_sel) != NA) ? (FOUR_BIT << 28) : 0) | \
+ (((glitch) != NA) ? (TWO_BIT << 26) : 0) | \
+ (((term) != NA) ? (FOUR_BIT << 20) : 0) | \
+ (FIVE_BIT << 15) | \
+ (((gpio_config) != NA) ? (THREE_BIT << 8) : 0) | \
+ (((gpio_light_mode) != NA) ? (ONE_BIT << 7) : 0) | \
+ (((gpio_state) != NA) ? ONE_BIT << 1 : 0)), \
+ .confg1 = ((((current_source) != NA) ? (current_source << 27) : 0) | \
+ (((inv_rx_tx) != NA) ? inv_rx_tx << 4 : 0) | \
+ (((open_drain) != NA) ? open_drain << 3 : 0) | \
+ (((int_type) != NA) ? int_type : 0)), \
+ .confg1_changes = ((((current_source) != NA) ? (ONE_BIT << 27) : 0) | \
+ (((inv_rx_tx) != NA) ? FOUR_BIT << 4 : 0) | \
+ (((open_drain) != NA) ? ONE_BIT << 3 : 0) | \
+ (((int_type) != NA) ? THREE_BIT : 0)), \
+ .community = community_offset, \
+ .mmio_addr = (community_offset == TERMINATOR) ? TERMINATOR : \
+ ((mmio_offset != NA) ? (IO_BASE_ADDRESS + \
+ community_offset + mmio_offset) : 0), \
+ .name = 0, \
+ .misc = ((((gpe) != NA) ? (gpe << 0) : 0) | \
+ (((wake_mask) != NA) ? (wake_mask << 2) : 0) | \
+ (((int_mask) != NA) ? (int_mask << 3) : 0)) | \
+ (((wake_mask_bit) != NA) ? (wake_mask_bit << 4) : (NA << 4)) \
+}
+
+#endif /* _BRASWELL_GPIO_H_ */