| /* |
| * Copyright (C) 2003-2005 Arabella Software Ltd. |
| * Yuli Barcohen <yuli@arabellasw.com> |
| * |
| * U-Boot configuration for Zephyr Engineering ZPC.1900 board. |
| * This port was developed and tested on Revision C board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ |
| #define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */ |
| #define CPU_ID_STR "MPC8265" |
| #define CONFIG_CPM2 1 /* Has a CPM2 */ |
| |
| /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| /* |
| * Select serial console configuration |
| * |
| * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then |
| * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 |
| * for SCC). |
| */ |
| #define CONFIG_CONS_ON_SMC /* Console is on SMC */ |
| #undef CONFIG_CONS_ON_SCC /* It's not on SCC */ |
| #undef CONFIG_CONS_NONE /* It's not on external UART */ |
| #define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */ |
| |
| /* |
| * Select ethernet configuration |
| * |
| * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, |
| * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for |
| * SCC, 1-3 for FCC) |
| * |
| * If CONFIG_ETHER_NONE is defined, then either the ethernet routines |
| * must be defined elsewhere (as for the console), or CONFIG_CMD_NET |
| * must be unset. |
| */ |
| #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ |
| #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ |
| #undef CONFIG_ETHER_NONE /* No external Ethernet */ |
| |
| #ifdef CONFIG_ETHER_ON_FCC |
| |
| #define CONFIG_ETHER_INDEX 2 /* FCC2 is used for Ethernet */ |
| |
| #if (CONFIG_ETHER_INDEX == 2) |
| /* |
| * - Rx clock is CLK13 |
| * - Tx clock is CLK14 |
| * - Select bus for bd/buffers (see 28-13) |
| * - Full duplex |
| */ |
| # define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) |
| # define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) |
| # define CFG_CPMFCR_RAMTYPE 0 |
| # define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) |
| |
| #endif /* CONFIG_ETHER_INDEX */ |
| |
| #define CONFIG_MII /* MII PHY management */ |
| #define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ |
| /* |
| * GPIO pins used for bit-banged MII communications |
| */ |
| #define MDIO_PORT 2 /* Port C */ |
| #define MDIO_ACTIVE (iop->pdir |= 0x00400000) |
| #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) |
| #define MDIO_READ ((iop->pdat & 0x00400000) != 0) |
| |
| #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ |
| else iop->pdat &= ~0x00400000 |
| |
| #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ |
| else iop->pdat &= ~0x00200000 |
| |
| #define MIIDELAY udelay(1) |
| |
| #endif /* CONFIG_ETHER_ON_FCC */ |
| |
| #ifndef CONFIG_8260_CLKIN |
| #define CONFIG_8260_CLKIN 66666666 /* in Hz */ |
| #endif |
| |
| #define CONFIG_BAUDRATE 38400 |
| |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_ASKENV |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_IMMAP |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_PING |
| |
| |
| #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ |
| #define CONFIG_BOOTCOMMAND "dhcp;bootm" /* autoboot command */ |
| #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=:::::eth0:dhcp" |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ |
| #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ |
| #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ |
| #define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ |
| #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ |
| #endif |
| |
| #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ |
| #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CFG_HUSH_PARSER |
| #define CFG_PROMPT_HUSH_PS2 "> " |
| #define CFG_LONGHELP /* undef to save memory */ |
| #define CFG_PROMPT "=> " /* Monitor Command Prompt */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
| #define CFG_MAXARGS 16 /* max number of command args */ |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ |
| #define CFG_MEMTEST_END 0x03800000 /* 1 ... 56 MB in DRAM */ |
| |
| #define CFG_LOAD_ADDR 0x400000 /* default load address */ |
| |
| #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ |
| |
| #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } |
| |
| #define CFG_SDRAM_BASE 0x00000000 |
| #define CFG_SDRAM_SIZE 64 |
| |
| #define CFG_IMMR 0xF0000000 |
| #define CFG_LSDRAM_BASE 0xFC000000 |
| #define CFG_FLASH_BASE 0xFE000000 |
| #define CFG_BCSR 0xFEA00000 |
| #define CFG_EEPROM 0xFEB00000 |
| #define CFG_FLSIMM_BASE 0xFF000000 |
| |
| #define CFG_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks */ |
| #define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ |
| |
| #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLSIMM_BASE } |
| |
| #define BCSR_PCI_MODE 0x01 |
| |
| #define CFG_INIT_RAM_ADDR CFG_IMMR |
| #define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ |
| #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
| #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) |
| #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET |
| |
| /* Hard reset configuration word */ |
| #define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01| HRCW_CIP |\ |
| HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB100 |\ |
| HRCW_BMS | HRCW_LBPC00 | HRCW_APPC10 |\ |
| HRCW_MODCK_H0111 \ |
| ) /* 0x16848207 */ |
| /* No slaves */ |
| #define CFG_HRCW_SLAVE1 0 |
| #define CFG_HRCW_SLAVE2 0 |
| #define CFG_HRCW_SLAVE3 0 |
| #define CFG_HRCW_SLAVE4 0 |
| #define CFG_HRCW_SLAVE5 0 |
| #define CFG_HRCW_SLAVE6 0 |
| #define CFG_HRCW_SLAVE7 0 |
| |
| #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ |
| #define BOOTFLAG_WARM 0x02 /* Software reboot */ |
| |
| #define CFG_MONITOR_BASE TEXT_BASE |
| #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) |
| #define CFG_RAMBOOT |
| #endif |
| |
| #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ |
| #define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ |
| #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
| |
| #if !defined(CFG_ENV_IS_IN_FLASH) && !defined(CONFIG_ENV_IS_IN_NVRAM) |
| #define CONFIG_ENV_IS_IN_NVRAM 1 |
| #endif |
| |
| #ifdef CFG_ENV_IS_IN_FLASH |
| # define CFG_ENV_SECT_SIZE 0x10000 |
| # define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) |
| #else |
| # define CFG_ENV_ADDR (CFG_EEPROM + 0x400) |
| # define CFG_ENV_SIZE 0x1000 |
| # define CFG_NVRAM_ACCESS_ROUTINE |
| #endif |
| |
| #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ |
| #if defined(CONFIG_CMD_KGDB) |
| # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
| #endif |
| |
| #define CFG_HID0_INIT (HID0_ICFI) |
| #define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) |
| |
| #define CFG_HID2 0 |
| |
| #define CFG_SIUMCR 0x42200000 |
| #define CFG_SYPCR 0xFFFFFFC3 |
| #define CFG_BCR 0x90000000 |
| #define CFG_SCCR SCCR_DFBRG01 |
| |
| #define CFG_RMR RMR_CSRE |
| #define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) |
| #define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) |
| #define CFG_RCCR 0 |
| |
| #define CFG_PSDMR /* 0x834DA43B */0x014DA43A |
| #define CFG_PSRT 0x0F/* 0x0C */ |
| #define CFG_LSDMR 0x0085A562 |
| #define CFG_LSRT 0x0F |
| #define CFG_MPTPR 0x4000 |
| |
| #define CFG_PSDRAM_BR (CFG_SDRAM_BASE | 0x00000041) |
| #define CFG_PSDRAM_OR 0xFC0028C0 |
| #define CFG_LSDRAM_BR (CFG_LSDRAM_BASE | 0x00001861) |
| #define CFG_LSDRAM_OR 0xFF803480 |
| |
| #define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00000801) |
| #define CFG_OR0_PRELIM 0xFFE00856 |
| #define CFG_BR5_PRELIM (CFG_EEPROM | 0x00000801) |
| #define CFG_OR5_PRELIM 0xFFFF03F6 |
| #define CFG_BR6_PRELIM (CFG_FLSIMM_BASE | 0x00001801) |
| #define CFG_OR6_PRELIM 0xFF000856 |
| #define CFG_BR7_PRELIM (CFG_BCSR | 0x00000801) |
| #define CFG_OR7_PRELIM 0xFFFF83F6 |
| |
| #define CFG_RESET_ADDRESS 0xC0000000 |
| |
| #endif /* __CONFIG_H */ |