COMMON: Use __stringify() instead of xstr()
Kill multiple occurances and redeclaration of xstr in favor of __stringify().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index 9b56e02..56dc1cb 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -402,8 +402,6 @@
/*
* Default environment settings
*/
-#define xstr(s) str(s)
-#define str(s) #s
#define DVN4XX_UBOOT_ADDR_R_RAM 0x80000000
/* (DVN4XX_UBOOT_ADDR_R_RAM + CONFIG_SYS_NAND_PAGE_SIZE) */
@@ -415,22 +413,22 @@
#define DVN4XX_UBOOT_ADDR_R_UBOOT 0x80003800
#define CONFIG_EXTRA_ENV_SETTINGS \
- "u_boot_addr_r=" xstr(DVN4XX_UBOOT_ADDR_R_RAM) "\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.ubl\0" \
+ "u_boot_addr_r=" __stringify(DVN4XX_UBOOT_ADDR_R_RAM) "\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.ubl\0" \
"load=tftp ${u_boot_addr_r} ${u-boot}\0" \
- "pagesz=" xstr(CONFIG_SYS_NAND_PAGE_SIZE) "\0" \
+ "pagesz=" __stringify(CONFIG_SYS_NAND_PAGE_SIZE) "\0" \
"writeheader=nandrbl rbl;nand erase 20000 ${pagesz};" \
"nand write ${u_boot_addr_r} 20000 ${pagesz};" \
"nandrbl uboot\0" \
"writenand_spl=nandrbl rbl;nand erase 0 3000;" \
- "nand write " xstr(DVN4XX_UBOOT_ADDR_R_NAND_SPL) \
+ "nand write " __stringify(DVN4XX_UBOOT_ADDR_R_NAND_SPL) \
" 0 3000;nandrbl uboot\0" \
"writeuboot=nandrbl uboot;" \
- "nand erase " xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
- xstr(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE) \
- ";nand write " xstr(DVN4XX_UBOOT_ADDR_R_UBOOT) \
- " " xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
- xstr(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \
+ "nand erase " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "\
+ __stringify(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE) \
+ ";nand write " __stringify(DVN4XX_UBOOT_ADDR_R_UBOOT) \
+ " " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
+ __stringify(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \
"update=run load writenand_spl writeuboot\0" \
"bootcmd=run net_nfs\0" \
"rootpath=/opt/eldk-arm/arm\0" \
@@ -447,14 +445,14 @@
"rootpath=/opt/eldk-arm/arm\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage \0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \
"kernel_addr_r=80600000\0" \
"load_kernel=tftp ${kernel_addr_r} ${bootfile}\0" \
"ubi_load_kernel=ubi part ubi 2048;ubifsmount ${img_volume};" \
"ubifsload ${kernel_addr_r} boot/uImage\0" \
- "fit_addr_r=" xstr(CONFIG_BOARD_IMG_ADDR_R) "\0" \
- "img_addr_r=" xstr(CONFIG_BOARD_IMG_ADDR_R) "\0" \
- "img_file=" xstr(CONFIG_HOSTNAME) "/ait.itb\0" \
+ "fit_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0" \
+ "img_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0" \
+ "img_file=" __stringify(CONFIG_HOSTNAME) "/ait.itb\0" \
"header_addr=20000\0" \
"img_writeheader=nandrbl rbl;" \
"nand erase ${header_addr} ${pagesz};" \
@@ -463,11 +461,11 @@
"img_writespl=nandrbl rbl;nand erase 0 3000;" \
"nand write ${img_addr_r} 0 3000;nandrbl uboot\0" \
"img_writeuboot=nandrbl uboot;" \
- "nand erase " xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
- xstr(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE) \
+ "nand erase " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "\
+ __stringify(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE) \
";nand write ${img_addr_r} " \
- xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
- xstr(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \
+ __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
+ __stringify(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \
"img_writedfenv=ubi part ubi 2048;" \
"ubi write ${img_addr_r} default ${filesize}\0" \
"img_volume=rootfs1\0" \