Configuration changes for ADS5121 Rev 3
ADS5121 Rev 3 board is now the default config
config targets are now
ads5121_config
Rev 3 board with
PCI
M41T62 on board RTC
512MB DRAM
ads5121_rev2_config
Rev 2 board with
No PCI
256MB DRAM
Signed-off-by: Martha Marx <mmarx@silicontkx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: John Rigby <jrigby@freescale.com>
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index 22277d9..f104e68 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -58,7 +58,12 @@
/* CONFIG_PCI is defined at config time */
+#ifdef CONFIG_ADS5121_REV2
#define CFG_MPC512X_CLKIN 66000000 /* in Hz */
+#else
+#define CFG_MPC512X_CLKIN 33333333 /* in Hz */
+#define CONFIG_PCI
+#endif
#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R
@@ -72,7 +77,11 @@
/*
* DDR Setup - manually set all parameters as there's no SPD etc.
*/
+#ifdef CONFIG_ADS5121_REV2
#define CFG_DDR_SIZE 256 /* MB */
+#else
+#define CFG_DDR_SIZE 512 /* MB */
+#endif
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
#define CFG_SDRAM_BASE CFG_DDR_BASE
@@ -120,14 +129,20 @@
* [09:05] DRAM tRP:
* [04:00] DRAM tRPA
*/
-
+#ifdef CONFIG_ADS5121_REV2
#define CFG_MDDRC_SYS_CFG 0xF8604A00
#define CFG_MDDRC_SYS_CFG_RUN 0xE8604A00
+#define CFG_MDDRC_TIME_CFG1 0x54EC1168
+#define CFG_MDDRC_TIME_CFG2 0x35210864
+#else
+#define CFG_MDDRC_SYS_CFG 0xFA804A00
+#define CFG_MDDRC_SYS_CFG_RUN 0xEA804A00
+#define CFG_MDDRC_TIME_CFG1 0x68EC1168
+#define CFG_MDDRC_TIME_CFG2 0x34310864
+#endif
#define CFG_MDDRC_SYS_CFG_EN 0xF0000000
#define CFG_MDDRC_TIME_CFG0 0x00003D2E
#define CFG_MDDRC_TIME_CFG0_RUN 0x06183D2E
-#define CFG_MDDRC_TIME_CFG1 0x54EC1168
-#define CFG_MDDRC_TIME_CFG2 0x35210864
#define CFG_MICRON_NOP 0x01380000
#define CFG_MICRON_PCHG_ALL 0x01100400
@@ -166,12 +181,17 @@
/*
* NOR FLASH on the Local Bus
*/
+#undef CONFIG_BKUP_FLASH
#define CFG_FLASH_CFI /* use the Common Flash Interface */
#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#ifdef CONFIG_BKUP_FLASH
+#define CFG_FLASH_BASE 0xFF800000 /* start of FLASH */
+#define CFG_FLASH_SIZE 0x00800000 /* max flash size in bytes */
+#else
#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH */
#define CFG_FLASH_SIZE 0x04000000 /* max flash size in bytes */
+#endif
#define CFG_FLASH_USE_BUFFER_WRITE
-
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */
@@ -287,14 +307,13 @@
#define CONFIG_NET_MULTI
#define CONFIG_PHY_ADDR 0x1
#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_FEC_AN_TIMEOUT 1
-#if 0
/*
* Configure on-board RTC
*/
-#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
+#define CONFIG_RTC_M41T62 /* use M41T62 rtc via i2 */
#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
-#endif
/*
* Environment
@@ -303,7 +322,11 @@
/* This has to be a multiple of the Flash sector size */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SIZE 0x2000
+#ifdef CONFIG_BKUP_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* one sector (256K) for env */
+#else
#define CFG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */
+#endif
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
@@ -322,6 +345,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DATE
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI