drivers: net: phy: aquantia: make it less verbose
The driver now unconditionally prints some information that's not
universally useful. Replace printf with debug.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
index 25d30a6..8ece926 100644
--- a/drivers/net/phy/aquantia.c
+++ b/drivers/net/phy/aquantia.c
@@ -424,9 +424,9 @@
fault = phy_read(phydev, MDIO_MMD_VEND1, GLOBAL_FAULT);
if (id != 0)
- printf("%s running firmware version %X.%X.%X\n",
- phydev->dev->name, (id >> 8), id & 0xff,
- (rstatus >> 4) & 0xf);
+ debug("%s running firmware version %X.%X.%X\n",
+ phydev->dev->name, (id >> 8), id & 0xff,
+ (rstatus >> 4) & 0xf);
if (fault != 0)
printf("%s fault 0x%04x detected\n", phydev->dev->name, fault);
@@ -507,12 +507,12 @@
if (usx_an) {
reg_val1 |= AQUANTIA_USX_AUTONEG_CONTROL_ENA;
- printf("%s: system interface USXGMII\n",
- phydev->dev->name);
+ debug("%s: system interface USXGMII\n",
+ phydev->dev->name);
} else {
reg_val1 &= ~AQUANTIA_USX_AUTONEG_CONTROL_ENA;
- printf("%s: system interface XFI\n",
- phydev->dev->name);
+ debug("%s: system interface XFI\n",
+ phydev->dev->name);
}
phy_write(phydev, MDIO_MMD_PHYXS,
@@ -539,11 +539,11 @@
val = phy_read(phydev, MDIO_MMD_VEND1, AQUANTIA_RESERVED_STATUS);
reg_val1 = phy_read(phydev, MDIO_MMD_VEND1, AQUANTIA_FIRMWARE_ID);
- printf("%s: %s Firmware Version %x.%x.%x\n", phydev->dev->name,
- phydev->drv->name,
- (reg_val1 & AQUANTIA_FIRMWARE_MAJOR_MASK) >> 8,
- reg_val1 & AQUANTIA_FIRMWARE_MINOR_MASK,
- (val & AQUANTIA_FIRMWARE_BUILD_MASK) >> 4);
+ debug("%s: %s Firmware Version %x.%x.%x\n", phydev->dev->name,
+ phydev->drv->name,
+ (reg_val1 & AQUANTIA_FIRMWARE_MAJOR_MASK) >> 8,
+ reg_val1 & AQUANTIA_FIRMWARE_MINOR_MASK,
+ (val & AQUANTIA_FIRMWARE_BUILD_MASK) >> 4);
return 0;
}