// SPDX-License-Identifier: GPL-2.0+
/*
 * (C) Copyright 2016 Rockchip Electronics Co., Ltd
 * (C) Copyright 2022 Peter Robinson <pbrobinson at gmail.com>
 */

#include <common.h>
#include <dm.h>
#include <init.h>
#include <syscon.h>
#include <asm/io.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/misc.h>
#include <power/regulator.h>

#define GRF_IO_VSEL_BT565_GPIO2AB 1
#define GRF_IO_VSEL_AUDIO_GPIO3D4A 2
#define PMUGRF_CON0_VSEL_SHIFT 8

#ifndef CONFIG_SPL_BUILD
int board_early_init_f(void)
{
	struct udevice *regulator;
	int ret;

	ret = regulator_get_by_platname("vcc5v0_usb", &regulator);
	if (ret) {
		pr_debug("%s vcc5v0_usb init fail! ret %d\n", __func__, ret);
		goto out;
	}

	ret = regulator_set_enable(regulator, true);
	if (ret)
		pr_debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__, ret);

out:
	return 0;
}
#endif

#ifdef CONFIG_MISC_INIT_R
static void setup_iodomain(void)
{
	struct rk3399_grf_regs *grf =
	   syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
	struct rk3399_pmugrf_regs *pmugrf =
	   syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);

	/* BT565 is in 1.8v domain */
	rk_setreg(&grf->io_vsel,
		  GRF_IO_VSEL_BT565_GPIO2AB | GRF_IO_VSEL_AUDIO_GPIO3D4A);

	/* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
	rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
}

int misc_init_r(void)
{
	const u32 cpuid_offset = 0x7;
	const u32 cpuid_length = 0x10;
	u8 cpuid[cpuid_length];
	int ret;

	setup_iodomain();

	ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
	if (ret)
		return ret;

	ret = rockchip_cpuid_set(cpuid, cpuid_length);
	if (ret)
		return ret;

	return ret;
}
#endif